Turbidity and the suspended sediment load of the regulated River Tees

The physical effects of river regulation in the U.K. by impoundments have attracted most attention from hydrologists and engineers concerned with predicting and maintaining discharge regimes for water supply. Grimshaw & Lewin (1980) suggested two basic methods to investigate the effects of regulation on suspended sediment discharge: (i) Compare the river load before and after reservoir construction, and (ii) adopt a paired catchment approach. The former method assumes stationarity of process in the natural system. The latter method, involving selecting two adjacent catchments of similar physical attributes, one regulated and one unregulated, assumes constancy of process spatially. In this report both approaches are adopted to examine the turbidity and suspended sediment concentration regime of the regulated River Tees. Neither approach was entirely satisfactory in the present case. This report examines the discharge and turbidity record consisting of approximately 4000 paired data points, representative of an 11-year post-impoundment period, that has been examined for the River Tees at Broken Scar, Darlington. A small amount of suspended sediment concentration data was also processed: these data are representative of both the pre-impoundment and post-impoundment sediment regime.

The content of the form of Julia Alvarezs In the time of the butterflies

In the Time of the Butterflies é um romance da escritora dominicana-americana Julia Alvarez sobre a vida e a morte das Borboletas, Las Mariposas, codinome das irmãs Mirabal, membros de um movimento clandestino contra o regime ditatorial de Rafael Leonidas Trujillo na República Dominicana, que se tornaram símbolos da luta contra o Trujillato depois de serem assassinadas a mando do ditador. Essa dissertação tem como objetivo expor como forma literária e contexto social estão diretamente relacionados nesse romance. Ela defende a ideia de que o borramento de três gêneros literários distintos metaficção historiográfica, autobiografia e bildungsroman reflete o questionamento das fronteiras entre o privado e o público, o pessoal e o político, o eu e o outro, o individual e o coletivo, a literatura e a história, fato e ficção e história e subjetividade. Ela também tenta mostrar como a problematização dessas dicotomias implica na contestação de noções pré-concebidas de identidade, história e nação

O estado empresário: regime jurídico das tradicionais e novas formas de atuação empresarial do estado na economia brasileira

A presente dissertação versa sobre limites para a intervenção do Estado na economia sob a forma empresarial e os controles a ela aplicáveis. Além de abordar o papel do Estado como acionista de sociedades privadas e a compatibilidade dessa forma de intervenção com o ordenamento jurídico brasileiro, promove-se uma releitura da doutrina e jurisprudência sobre as sociedades de economia mista e sobre as empresas públicas. Estuda-se as razões que levam o Estado a intervir na economia de uma maneira geral, seja de forma direta ou indireta, a partir das teorias econômicas normativas e descritivas sobre a intervenção estatal na economia. Discorre-se sobre os fundamentos constitucionais à intervenção do Estado na economia e os possíveis motivos para a criação de empresas estatais e participação minoritária em sociedades privadas, bem como sobre os condicionamentos impostos pelo princípio da livre iniciativa à intervenção do Estado na economia, em especial à luz da jurisprudência dos Tribunais Superiores. Foram abordados, ainda, os princípios da eficiência, da livre concorrência e da proporcionalidade, que também constituem fundamentos e limites gerais à intervenção do Estado na economia, além da necessidade de autorização legal. Além de apresentarmos um breve resumo da discussão histórica sobre a criação das empresas estatais no Brasil e os motivos para a escolha de um ou outro tipo de sociedade estatal, analisa-se o regime jurídico aplicável a essas entidades, à luz dos dispositivos constitucionais e da jurisprudência sobre o tema, incluindo-se o estudo do seu regime de pessoal, de bens, tributário, licitações, contratual, responsabilidade civil e falência. Estudaremos, ainda, as formas de controle incidentes sobre essas entidades. Por fim, a dissertação também abrange o estudo da intervenção do Estado como acionista minoritário em sociedades privadas, abordando os motivos para essa participação societária, bem como a natureza dessa intervenção. Trata-se de empresas controladas pela iniciativa privada, mas que têm algum grau de participação estatal em seu capital. São muitos os motivos que podem levar o Poder Público a participar sem poder de controle em empresas privadas. A participação minoritária pode visar a permitir um maior controle do Estado sobre a empresa participada, ou mesmo a tomada de controle gradual de determinada companhia, mas também pode constituir uma forma de parceria entre a iniciativa estatal e a privada, como forma mais eficiente de fomento de atividades consideradas de interesse público ou de compartilhamento de riscos e custos envolvidos em determinada atividade explorada pelo Poder Público e pela iniciativa privada. Aborda-se a relação das sociedades meramente participadas com a Administração pública, bem como os condicionamentos constitucionais à participação minoritária estatal sem controle em sociedades privadas (proporcionalidade, eficiência, necessidade de autorização legal, realização de procedimento licitatório com vista à escolha do parceiro privado, e controle do Tribunal de Contas da União).

Parity-dependent State Engineering and Tomography in the ultrastrong coupling regime

Reaching the strong coupling regime of light-matter interaction has led to an impressive development in fundamental quantum physics and applications to quantum information processing. Latests advances in different quantum technologies, like superconducting circuits or semiconductor quantum wells, show that the ultrastrong coupling regime (USC) can also be achieved, where novel physical phenomena and potential computational benefits have been predicted. Nevertheless, the lack of effective decoupling mechanism in this regime has so far hindered control and measurement processes. Here, we propose a method based on parity symmetry conservation that allows for the generation and reconstruction of arbitrary states in the ultrastrong coupling regime of light-matter interactions. Our protocol requires minimal external resources by making use of the coupling between the USC system and an ancillary two-level quantum system.

Scalable quantum memory in the ultrastrong coupling regime

Circuit quantum electrodynamics, consisting of superconducting artificial atoms coupled to on-chip resonators, represents a prime candidate to implement the scalable quantum computing architecture because of the presence of good tunability and controllability. Furthermore, recent advances have pushed the technology towards the ultrastrong coupling regime of light-matter interaction, where the qubit-resonator coupling strength reaches a considerable fraction of the resonator frequency. Here, we propose a qubit-resonator system operating in that regime, as a quantum memory device and study the storage and retrieval of quantum information in and from the Z(2) parity-protected quantum memory, within experimentally feasible schemes. We are also convinced that our proposal might pave a way to realize a scalable quantum random-access memory due to its fast storage and readout performances.

Rolling of thin strip and foil: Application of a tribological model for "mixed" lubrication

A mechanical model of cold rolling of foil is coupled with a sophisticated tribological model. The tribological model treats the "mixed" lubrication regime of practical interest, in which there is "real" contact between the roll and strip as well as pressurized oil between the surfaces. The variation of oil film thickness and contact ratio in the bite is found by considering flattening of asperities on the foil and the build-up of hydrodynamic pressure through the bite. The boundary friction coefficient for the contact areas is taken from strip drawing tests under similar tribological conditions. Theoretical results confirm that roll load and forward slip decrease with increasing rolling speed due to the decrease in contact ratio and friction. The predictions of the model are verified using mill trials under industrial conditions. For both thin strip and foil, the load predicted by the model has reasonable agreement with the measurements. For rolling of foil, forward slip is overestimated. This is greatly improved if a variation of friction through the bite is considered.

Culture potential of Amblypharyngodon mola with carps in polyculture in farmers' pond of northern regions of Bangladesh

To assess the culture potential of mola (Amblypharyngodon mola) along with carps in polyculture systems, an experiment consisted of three treatments each with five replications was conducted for 4 months in two villages of Parbatipur upazilla under Dinajpur district. In the first treatment (SS), catla, rohu, mrigal, grass carp, Thai punti, common carp and a higher density of silver carp (8 per 40m²) were stocked. In the second treatment (SM), stocking density of silver carp was reduced to half and mola was added at a stocking density of 12,500/ha with all other fishes used in SS. In the third treatment (MM), no silver carp was stocked and mola was added at a stocking density of 25,000/ha with all other fishes used in SS. All treatments were subjected to the same regime of feed and fertilizers. The yields of large carps were 2035 kg/ha, 1757 kg/ha and 1326 kg/ha for treatments SS, SM and MM, respectively. Catla, grass carp and carpio showed better growth and production performance in presence of mola at a higher density, while rohu, Thai punti and mrigal showed better performance when stocking density of mola was relatively low. Mola yield was almost two times higher (184 kg/ha) in absence of silver carp (MM) than (62 kg/ha) in presence of silver carp (SM). The result showed that there was a significantly (p<0.01) lower total fish production in treatment MM. But there were no significant difference in total production between treatment SS and SM.

Dynamic buckling of an inclined strut

The dynamic compressive response of a sandwich plate with a metallic corrugated core is predicted. The back face of the sandwich plate is held fixed whereas the front face is subjected to a uniform velocity, thereby compressing the core. Finite element analysis is performed to investigate the role of material inertia, strain hardening and strain rate hardening upon the dynamic collapse of the corrugated core. Three classes of collapse mode are identified as a function of impact velocity: (i) a three-hinge plastic buckling mode of wavelength equal to the strut length, similar to the quasi-static mode, (ii) a 'buckle-wave' regime involving inertia-mediated plastic buckling of wavelength less than that of the strut length, and (iii) a 'stubbing' regime, with shortening of the struts by local fattening at the front face. The presence of strain hardening reduces the regime of dominance of the stubbing mode. The influence of material strain rate sensitivity is evaluated by introducing strain rate dependent material properties representative of type 304 stainless steel. For this choice of material, strain rate sensitivity has a more minor influence than strain hardening, and consequently the dynamic collapse strength of a corrugated core is almost independent of structural dimension. © 2012 Elsevier Ltd. All rights reserved.

The interaction of riblets with wall-bounded turbulence

The purpose of this thesis is to give answer to the question: why do riblets stop working for a certain size? Riblets are small surface grooves aligned in the mean direction of an overlying turbulent flow, designed specifically to reduce the friction between the flow and the surface. They were inspired by biological surfaces, like the oriented denticles in the skin of fastswimming sharks, and were the focus of a significant amount of research in the late eighties and nineties. Although it was found that the drag reduction depends on the riblet size scaled in wall units, the physical mechanisms implicated have not been completely understood up to now. It has been explained how riblets of vanishing size interact with the turbulent flow, producing a change in the drag proportional to their size, but that is not the regime of practical interest. The optimum performance is achieved for larger sizes, once that linear behavior has broken down, but before riblets begin adopting the character of regular roughness and increasing drag. This regime, which is the most relevant from a technological perspective, was precisely the less understood, so we have focused on it. Our efforts have followed three basic directions. First, we have re-assessed the available experimental data, seeking to identify common characteristics in the optimum regime across the different existing riblet geometries. This study has led to the proposal of a new length scale, the square root of the groove crosssection, to substitute the traditional peak-to-peak spacing. Scaling the riblet dimension with this length, the size of breakdown of the linear behavior becomes roughly universal. This suggests that the onset of the breakdown is related to a certain, fixed value of the cross-section of the groove. Second, we have conducted a set of direct numerical simulations of the turbulent flow over riblets, for sizes spanning the full drag reduction range. We have thus been able to reproduce the gradual transition between the different regimes. The spectral analysis of the flows has proven particularly fruitful, since it has made possible to identify spanwise rollers immediately above the riblets, which begin to appear when the riblet size is close to the optimum. This is a quite surprising feature of the flow, not because of the uniqueness of the phenomenon, which had been reported before for other types of complex and porous surfaces, but because most previous studies had focused on the detail of the flow above each riblet as a unit. Our novel approach has provided the adequate tools to capture coherent structures with an extended spanwise support, which interact with the riblets not individually, but collectively. We have also proven that those spanwise structures are responsible for the increase in drag past the viscous breakdown. Finally, we have analyzed the stability of the flow with a simplified model that connects the appearance of rollers to a Kelvin–Helmholtz-like instability, as is the case also for the flow over plant canopies and porous surfaces. In spite of the model emulating the presence of riblets only in an averaged, general fashion, it succeeds to capture the essential attributes of the breakdown, and provides a theoretical justification for the scaling with the groove cross-section.

Theory of high-power mode-locked lasers with a slow absorber

We develop an analytical theory of high-power passively mode-locked lasers with a slow absorber; the theory is valid at pulse energies well exceeding the saturation energy. We analyze the Haus modelocking master equation in the pulse-energy-domain representation, approximating the intensity profile function by a series in the vicinity of its peak value. We consider the high-power operation regime of subpicosecond blue-violet GaN mode-locked diode lasers, using the approach developed. © 2010 Springer Science+Business Media, Inc.

Properties of electrons and holes during femtosecond cooperative emission

Spectral and energetic characteristics of the cooperative recombination of high density electrons and holes in bulk GaAs are experimentally studied at room temperature. It is shown that the properties and parameters of femtosecond superradiant pulses are conditioned by the collective properties of electrons and holes. Electron-hole pairing and the formation of a short-living coherent e-h BCS state distinguish strongly the regime of cooperative emission from all radiative e-h recombination regimes, which have been observed earlier. The dependences of the energy gap (the order parameter), the Fermi energy, and the band gap of the coherent e-h BCS state on the concentration of electron-hole pairs are obtained.

Measuring the compressive viscoelastic mechanical properties of human cervical tissue using indentation.

The human cervix is an important mechanical barrier in pregnancy which must withstand the compressive and tensile forces generated from the growing fetus. Premature cervical shortening resulting from premature cervical remodeling and alterations of cervical material properties are known to increase a woman׳s risk of preterm birth (PTB). To understand the mechanical role of the cervix during pregnancy and to potentially develop indentation techniques for in vivo diagnostics to identify women who are at risk for premature cervical remodeling and thus preterm birth, we developed a spherical indentation technique to measure the time-dependent material properties of human cervical tissue taken from patients undergoing hysterectomy. In this study we present an inverse finite element analysis (IFEA) that optimizes material parameters of a viscoelastic material model to fit the stress-relaxation response of excised tissue slices to spherical indentation. Here we detail our IFEA methodology, report compressive viscoelastic material parameters for cervical tissue slices from nonpregnant (NP) and pregnant (PG) hysterectomy patients, and report slice-by-slice data for whole cervical tissue specimens. The material parameters reported here for human cervical tissue can be used to model the compressive time-dependent behavior of the tissue within a small strain regime of 25%.

Peculiarity of constant photocurrent method for silicon films with mixed amorphous-nanocrystalline structure

The results of conductivity, photoconductivity and constant photocurrent method absorption measurements by DC and AC methods in hydrogenated silicon films with mixed amorphous-nanocrystalline structure are presented. A series of diphasic silicon films was deposited by very high frequency plasma enhanced chemical vapor deposition technique, using different hydrogen dilution ratios of silane. The increase of hydrogen dilution ratio results in five orders of magnitude increase of conductivity and a sharp increase of grain volume fraction. The comparison of the absorption spectra obtained by DC and AC methods showed that they are similar for silicon films with the predominantly amorphous structure and films with high grain volume fraction. However we found a dramatic discrepancy between the absorption spectra obtained by DC and AC constant photocurrent methods in silicon films deposited in the regime of the structure transition from amorphous to nanocrystalline state. AC constant photocurrent method gives higher absorption coefficient than DC constant photocurrent method in the photon energy range of 1.2-1.7 eV. This result indicates the possibility of crystalline grains contribution to absorption spectra measured by AC constant photocurrent method in silicon films with intermediate crystalline grain volume fraction. (c) 2008 Published by Elsevier B.V.

Analytical model of spin filtering effect and its experimental verification in a forward-biased iron-metal-Al2O3-n-type GaAs tunneling structure under optical spin orientation

An analytical model for the spin filtering transport in a ferromagnetic-metal - Al2O3 - n-type semiconductor tunneling structure has been developed, and demonstrated that the ratio of the helicity-modulated photo-response to the chopped one is proportional to the sum of the relative asymmetry in conductance of two opposite spin-polarized tunneling channels and the MCD effect of the ferromagnetic metal film. The performed measurement in an iron-metal/Al2O3/n-type GaAs tunneling structure under the optical spin orientation has verified that all the aspects of the experimental results are very well in accordance with our model in the regime of the spin filtering. After the MCD effect of the iron film is calibrated by an independent measurement, the physical quantity of Delta G(t)/G(t) (Delta G(t) = G(t)(up arrow) - G(t)(down arrow) is the difference of the conductance between two opposite spin tunneling channels, G(t) =( G(t)(up arrow) + G(t)(down arrow))/2 the averaged tunneling conductance), which concerns us most, can be determined quantitatively with a high sensitivity in the framework of our analytical model. Copyright (c) EPLA, 2008.

Characterization of polymorphous silicon thin film and solar cells

Polymorphous silicon (pm-Si:H) films have been prepared by a new regime of plasma enhanced chemical vapour deposition in the region adjacent of phase transition from amorphous to microcrystalline state. Comparing to the conventional amorphous silicon (a-Si:H), the pm-Si:H has higher photoconductivity (sigma(ph)), better stability, and a broader light spectral response range in the longer wavelength range. It can be found from Raman spectra that there is a notable improvement in the medium range order. There are a blue shift for the stretching mode of IR spectra and a red shift for the wagging mode. The shifts are attributed to the variation of the microstructure. By using pm-Si:H film as intrinsic layer, a p-i-n junction solar cell was prepared with the initial efficiency of 8.51% and a stabilized efficiency of 8.01% (AM1.5, 100mw/cm(2)) at room temperature (T-R).