Oxygen mobility in Bi:Sr:Ca:Cu:O ceramic measured using anelastic relaxation methods

Since the discovery of YBaCuO, experiments have shown that its superconducting properties are strongly affected by the oxygen content. More recently, anelastic relaxation measurements in La2CuO4+δ, showed that the decrease in the oxygen content can be related to two events. One is the decrease in mobility between two adjacent CuO planes, and the other is the increase in the number of tilting patterns of the CuO6 octahedra. In the case of the bismuth-based ceramic, it is known that the oxygen content, within some limits, does not affect its superconducting properties. In order to evaluate the mobility and the effect of the oxygen content on this material we have prepared BSCCO ceramic and tested regarding its internal friction and electrical resistivity as a function of the temperature while the oxygen content was being reduced by a sequence of vacuum annelaing at 620 K. The samples were prepared in the Bi:Sr:Ca:Cu = 2212 and 2223 proportion, using powder obtained by the sol-gel route and conventional solid state reaction. The anelastic relaxation measurements were performed using a torsion pendulum operating with frequency about 15-35 Hz between 77 to 700 K. The diffraction pattern of the as sintered and the vacuum annealed material were also presented. The results have shown complex anelastic relaxation structures that were associated to the jump of interstitial oxygen atoms between two adjacent CuO planes. The vacuum annealing showed to be deleterious to the critical temperature of the superconducting ceramic.

Características químico-mineralógicas e cerâmicas da matéria-prima utilizada pelo polo cerâmico de Rio Verde de Mato Grosso, MG

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A cartografia geomorfológica como subsídio para a análise do relevo antropogênico em área de mineração

Mining activities are directly related to changes in natural landscapes. With the objective of analyzing the changes imposed by the geomorphological dynamics of human action in areas of mining clay, two fragments were selected from the basin of Ribeirão Santa Gertrudes / SP, representing denudational and sedimentation processes respectively. This area is within the context of the Ceramic Pole Santa Gertrudes / SP, which besides its importance as a supplier of raw material, is characterized as the largest center of international reference in ceramic tiles on the American continent. Data was collected and analyzed from the perspective of anthropogenic geomorphology supported by general systems theory and uses techniques from evolutionary geomorphological mapping. Thus, geomorphological mapping were produced concerning three scenarios, which date from 1962, 1988 and 2006 in a scale of 1:10.000. These surveys allowed us to infer a detailed investigation of the evolution of changes in topography and hydrology, geomorphology representative of the original (1962), which has characteristics of an earlier phase of earlier existing large mining pits, and its evolution to a anthropogenic geomorphological stage, represented by active disruption scenarios dating from 1988 and 2006. The last two scenarios have analyzed changes in the dimensions of relief features when compared with the original scenario representative of geomorphology, as well as an intense reallocation of surface and subsurface materials, in which human action is highlighted by becoming responsible for sculpting the landscape through the imposition of control mechanisms to natural processes.

Study of the interactions of Neptunium with humic substances and the clay mineral montmorillonite by direct and non direct speciation methods

For the safety assessment of radioactive waste, the possibility of radionuclide migration has to be considered. Since Np (and also Th due to the long-lived 232-Th) will be responsible for the greatest amount of radioactivity one million years after discharge from the reactor, its (im)-mobilization in the geosphere is of great importance. Furthermore, the chemistry of Np(V) is quite similar (but not identical) to the chemistry of Pu(V). Three species of neptunium may be found in the near field of the waste disposal, but pentavalent neptunium is the most abundant species under a wide range of natural conditions. Within this work, the interaction of Np(V) with the clay mineral montmorillonite and melanodins (as model substances for humic acids) was studied. The sorption of neptunium onto gibbsite, a model clay for montmorillonite, was also investigated. The sorption of neptunium onto γ-alumina and montmorillonite was studied in a parallel doctoral work by S. Dierking. Neptunium is only found in ultra trace amounts in the environment. Therefore, sensitive and specific methods are needed for its determination. The sorption was determined by γ spectroscopy and LSC for the whole concentration range studied. In addition the combination of these techniques with ultrafiltration allowed the study of Np(V) complexation with melanoidins. Regrettably, the available speciation methods (e.g. CE-ICP-MS and EXAFS) are not capable to detect the environmentally relevant neptunium concentrations. Therefore, a combination of batch experiments and speciation analyses was performed. Further, the preparation of hybrid clay-based materials (HCM) montmorillonitemelanoidins for sorption studies was achieved. The formation of hybrid materials begins in the interlayers of the montmorillonite, and then the organic material spreads over the surface of the mineral. The sorption of Np onto HCM was studied at the environmentally relevant concentrations and the results obtained were compared with those predicted by the linear additive model by Samadfam. The sorption of neptunium onto gibbsite was studied in batch experiments and the sorption maximum determined at pH~8.5. The sorption isotherm pointed to the presence of strong and weak sorption sites in gibbsite. The Np speciation was studied by using EXAFS, which showed that the sorbed species was Np(V). The influence of M42 type melanodins on the sorption of Np(V) onto montmorillonite was also investigated at pH 7. The sorption of the melanoidins was affected by the order in which the components were added and by ionic strength. The sorption of Np was affected by ionic strength, pointing to outer sphere sorption, whereas the presence of increasing amounts of melanoidins had little influence on Np sorption.

All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part I: Single crowns (SCs).

OBJECTIVE To assess the 5-year survival of metal-ceramic and all-ceramic tooth-supported single crowns (SCs) and to describe the incidence of biological, technical and esthetic complications. METHODS Medline (PubMed), Embase, Cochrane Central Register of Controlled Trials (CENTRAL) searches (2006-2013) were performed for clinical studies focusing on tooth-supported fixed dental prostheses (FDPs) with a mean follow-up of at least 3 years. This was complimented by an additional hand search and the inclusion of 34 studies from a previous systematic review [1,2]. Survival and complication rates were analyzed using robust Poisson's regression models to obtain summary estimates of 5-year proportions. RESULTS Sixty-seven studies reporting on 4663 metal-ceramic and 9434 all-ceramic SCs fulfilled the inclusion criteria. Seventeen studies reported on metal-ceramic crowns, and 54 studies reported on all-ceramic crowns. Meta-analysis of the included studies indicated an estimated survival rate of metal-ceramic SCs of 94.7% (95% CI: 94.1-96.9%) after 5 years. This was similar to the estimated 5-year survival rate of leucit or lithium-disilicate reinforced glass ceramic SCs (96.6%; 95% CI: 94.9-96.7%), of glass infiltrated alumina SCs (94.6%; 95% CI: 92.7-96%) and densely sintered alumina and zirconia SCs (96%; 95% CI: 93.8-97.5%; 92.1%; 95% CI: 82.8-95.6%). In contrast, the 5-year survival rates of feldspathic/silica-based ceramic crowns were lower (p<0.001). When the outcomes in anterior and posterior regions were compared feldspathic/silica-based ceramic and zirconia crowns exhibited significantly lower survival rates in the posterior region (p<0.0001), the other crown types performed similarly. Densely sintered zirconia SCs were more frequently lost due to veneering ceramic fractures than metal-ceramic SCs (p<0.001), and had significantly more loss of retention (p<0.001). In total higher 5 year rates of framework fracture were reported for the all-ceramic SCs than for metal-ceramic SCs. CONCLUSIONS Survival rates of most types of all-ceramic SCs were similar to those reported for metal-ceramic SCs, both in anterior and posterior regions. Weaker feldspathic/silica-based ceramics should be limited to applications in the anterior region. Zirconia-based SCs should not be considered as primary option due to their high incidence of technical problems.

(Table 1) Clay mineralogy at DSDP Sites 86-576 and 86-578

Late Cretaceous and Cenozoic sediments deposited on the eastern and western sides of the Shatsky Rise show similar clay assemblages of chlorite, illite, mixed layers, smectite, kaolinite, and palygorskite, and a similar vertical differentiation into three units. The deep-sea pelagic red clay is dominated by terrigenous components, which suggests that diagenesis is minor in this part of the western North Pacific and that eolian supply is very important. The role of the Shatsky Rise as a submarine barrier is of minor importance. The volcanic contribution to the clay component appears very small, as in some other parts of the Pacific Ocean. Stratigraphic correlations between Sites 576 and 578, which can be made from mineralogical data, partly offset the rareness of biostratigraphic markers.

Isotopic composition and chemistry of pore waters from ODP Site 195-1201 sediments, West Philippine Basin

This report summarizes chemical and isotopic data from Ocean Drilling Program Leg 195 Site 1201. Pore water is divided into three intervals based on the rate of chemical change with depth. The shallowest interval is the red clay unit between 1.26 and 56.40 meters below seafloor (mbsf). In this section, there are overall decreases in the concentrations of alkalinity, boron, lithium, magnesium, potassium, sodium, and sulfate, whereas concentrations of calcium and chloride increase. Values of d18O and dD plot near standard mean ocean water to the right of the global meteoric water line (GMWL). Five samples from 72.60 and 83.33 mbsf yielded pore water for analyses. These samples help define a trend in the second interval, which is between 56.4 and 238.98 mbsf. Here, concentrations of magnesium, potassium, sodium, and sulfate decease, whereas concentrations of boron, calcium, and chloride increase. Concentrations of alkalinity and lithium remain roughly constant. The deepest interval, between 238.04 and 504.8 mbsf, has comparatively slower decreases of sodium and sulfate, increases of calcium and chloride, slow increases of alkalinity and lithium, and roughly constant concentrations of magnesium, potassium, and boron. Values of d18O and dD in pore water between 146.98 and 504.80 mbsf plot in a linear trend to the right of the GMWL.

Computerized Three-Dimmensional Craniofacial Reconstruction from Skulls Based on Landmarks.

Human identification from a skull is a critical process in legal and forensic medicine, specially when no other means are available. Traditional clay-based methods attempt to generate the human face, in order to identify the corresponding person. However, these reconstructions lack of objectivity and consistence, since they depend on the practitioner. Current computerized techniques are based on facial models, which introduce undesired facial features when the final reconstruction is built. This paper presents an objective 3D craniofacial reconstruction technique, implemented in a graphic application, without using any facial template. The only information required by the software tool is the 3D image of the target skull and three parameters: age, gender and Body Mass Index (BMI) of the individual. Complexity is minimized, since the application database only consists of the anthropological information provided by soft tissue depth values in a set of points of the skull.

Estudio del Fenómeno Social Media en las grandes corporaciones del sector TIC

Este trabajo trata el estudio de la implementación y desarrollo de las diversas plataformas del social media: redes sociales y del conocimiento, blogs y herramientas colaborativas en el ámbito corporativo de la empresa. El estudio recopila información de consultoras tecnológicas, de artículos y de diversas plataformas social media y se realiza una investigación sobre el tema planteado. Se incluye el análisis de 42 encuestas a profesionales de dos grandes empresas de las telecomunicaciones en España. Estas dos empresas cuentan una con cerca de 28000 empleados y la otra con más 300 empleados en sus filiales españolas. Ambas tienen una importante presencia internacional. Estas dos empresa se diferencian de otras empresas del sector de las telecomunicaciones en que están apostando en la implementación del social media en sus procesos internos. Además se incluye el estudio y análisis de las estadísticas de uso y de una series de encuestas realizadas en el muro de la red social corporativa de una multinacional de las telecomunicaciones durante tres meses. Se presenta una nueva cultura social de empresa innovadora en áreas como la gestión del conocimiento, comunicación interna, formación e innovación. Y se ofrece una visión cuantitativa y de la implantación del social media en los procesos de una empresa. Se desarrolla una exposición donde se detalla el proceso de estudio de las diferentes plataformas social media y áreas de aplicación en la empresa, el estudio de los aspectos legales de su aplicación y uso y la implementación y desarrollo. Asimismo se expone un análisis teórico-práctico del cálculo del retorno de la inversión (ROI) y por último un análisis de la información recopilada en las encuestas y en el estudio estadístico de la red social corporativa. Los datos de las encuestas fueron analizados mediante estadística descriptiva basada en gráficos y tablas de contingencia donde se calculan residuos y porcentajes totales para analizar la dependencia entre el social media, eficiencia, productividad y cuenta de resultados, además del análisis de la aportación del social media a la misión, comunicación interna y gestión del conocimiento en la empresa. También se realizan cálculos de distribuciones Chi-cuadrado para demostrar la dependencia del social media-productividad y del GAP que relaciona la importancia y el nivel de satisfacción del social media. En el análisis teórico-práctico se toman como parámetros los beneficios, costes, flexibilidad y riesgo. Los beneficios van ligados a la productividad, gestión del conocimiento, capital humano y procesos internos. Los costes a las licencias de software, administración, implementación y formación. A partir de estos parámetros se realizó el estudio de un modelo de empresa que representa a una gran empresa de las TIC en España. Los datos para el estudio son estimativos dentro de la realidad, debido a que la intención no es saber estos valores reales sino el estudio teórico-práctico del método y su aplicación para el calculo del ROI. El estudio estadístico del la red social se realizo durante tres meses y se obtuvo el progreso de uso de la red social en eventos tales como: número de participantes activos, mensajes publicados, archivos subidos, grupos activos y tipos y plataformas de acceso. Del estudio de los datos estadísticos de estos eventos se obtuvieron indicadores de participación, actividad y conocimiento de la red social que son útiles par el calculo del ROI. En conclusión, se demuestran las mejoras que ofrece el social media en campos como la comunicación interna, gestión del conocimiento, formación e innovación. Y gracias a estas mejoras el aumento de la productividad y eficiencia del profesional y asimismo un potencial retorno de la inversión (ROI). ABSTRACT. This paper deals with the study of the implementation and development of the different platforms of social media: social networks and knowledge, blogs and collaborative tools in the corporate enterprise level. The study collects information technology consulting, articles and several social media platforms and an investigation into the question raised is performed. Analysis of 42 surveys of professionals from two big companies telecommunications in Spain are included. These two companies have one about 28000 employees and another with more than 300 employees at its Spanish subsidiaries. Both have a strong international presence. These two companies differ from other companies in the telecommunications sector they are betting in the implementation of social media in their internal processes. Furthermore, the study and analysis of usage statistics and a series of surveys on the wall of the corporate social network of a multinational telecommunications is included for three months. A new social culture enterprise is presented innovative in areas such as knowledge management, internal communications, training and innovation. And a quantitative vision into implementation of social media in the processes of a company is offered. They develops an exhibition where shown the process of studying the different social media platforms and application areas in the company, the study of the legal aspects of your application and use and implementation and development. A theoretical and practical analysis also exposed of calculation of return on investment (ROI) and finally an analysis of the information collected in surveys and statistical study of corporate social network. The survey data were analyzed using descriptive statistics based on graphs and contingency tables where waste and total percentages are calculated for analyze the dependence between the social media, efficiency, productivity and income statement, plus analysis of the contribution of social media on the mission, internal communication and knowledge management in the company. Also Calculations of chi-square distributions are conducted to demonstrate the dependence between of productivity and social media and the GAP that relates the importance and satisfaction level in social media. The theoretical and practical analysis parameters are the benefits, costs, flexibility and risk. The benefits are linked to productivity, knowledge management, human capital and internal processes. The costs are linked the software licensing, management, implementation and training. Based on these parameters was performed the study of a business model that represents a large ICT company in Spain. The data for the study are estimates within the reality, because the intention is not to know these real values but the theoretical and practical study and application of the method for calculating the ROI. Statistical analysis of the social network was made during or three months and was obtained the progress of social network use at events such as: number of active participants, messages posted, files uploaded, active groups and types and access platforms. Into study of statistical data of these events were obtained indicators of participation, activity and knowledge of the social network that are useful for calculating the ROI. In conclusion, the improvements offered by the social media in areas such as internal communication, knowledge management, training and innovation are shown. And thanks to these improvements increase the productivity and efficiency of professional and also a potential return on investment (ROI).

Artisan procedures to generate uniform tilings

This paper try to prove how artisans c ould discover all uniform tilings and very interesting others us ing artisanal combinatorial pro cedures without having to use mathematical procedures out of their reac h. Plane Geometry started up his way through History by means of fundamental drawing tools: ruler and co mpass. Artisans used same tools to carry out their orna mental patterns but at some point they began to work manually using physical representations of fi gures or tiles previously drawing by means of ruler and compass. That is an important step for craftsman because this way provides tools that let him come in the world of symmetry opera tions and empirical knowledge of symmetry groups. Artisans started up to pr oduce little wooden, ceramic or clay tiles and began to experiment with them by means of joining pieces whether edge to edge or vertex to vertex in that way so it can c over the plane without gaps. Economy in making floor or ceramic tiles could be most important reason to develop these procedures. This empiric way to develop tilings led not only to discover all uniform tilings but later discovering of aperiodic tilings.

Artisan procedures to generate uniform tilings

This paper try to prove how artisans c ould discover all uniform tilings and very interesting others us ing artisanal combinatorial pro cedures without having to use mathematical procedures out of their reac h. Plane Geometry started up his way through History by means of fundamental drawing tools: ruler and co mpass. Artisans used same tools to carry out their orna mental patterns but at some point they began to work manually using physical representations of fi gures or tiles previously drawing by means of ruler and compass. That is an important step for craftsman because this way provides tools that let him come in the world of symmetry opera tions and empirical knowledge of symmetry groups. Artisans started up to pr oduce little wooden, ceramic or clay tiles and began to experiment with them by means of joining pieces whether edge to edge or vertex to vertex in that way so it can c over the plane without gaps. Economy in making floor or ceramic tiles could be most important reason to develop these procedures. This empiric way to develop tilings led not only to discover all uniform tilings but later discovering of aperiodic tilings.

(Table 1) Concentrations of Os, Ir, Pt and 187Os/188Os ratio in ODP Hole 130-806C samples

New osmium (Os) isotope and platinum group element (PGE) concentration data are used in conjunction with published 3He and Th isotope data to determine the relative proportions of lithogenic, extraterrestrial and hydrogenous iridium (Ir) in a Pacific pelagic carbonate sequence from the Ocean Drilling Program (ODP) Site 806 on the Ontong Java Plateau (OJP). These calculations demonstrate that lithogenic and extraterrestrial contributions to sedimentary Ir budget are minor, while hydrogenous Ir accounts for roughly 85% of the total Ir. Application of analogous partitioning calculations to previously reported data from a North Pacific red clay sequence (LL44-GPC3) yields very similar results. Total Ir burial fluxes at Site 806 and LL44-GPC3 are also similar, 45 and 30 pg/cm**2/kyr, respectively. Average Ir/3He and Ir/xs230Th_initial ratios calculated from the entire Site 806 data set are similar to those reported earlier for Pacific sites. In general, down-core profiles of Ir, 3He and xs230Th_initial, are not well correlated with one another. However, all three data sets show similar variance and yield sediment mass accumulation rate estimates that agree within a factor of two. While these results indicate that Ir concentration has potential as a point-paleoflux tracer in pelagic carbonates, Ir-based paleoflux estimates are likely subject to uncertainties that are similar to those associated with Co-based paleoflux estimates. Consequently, local calibration of Ir flux in space and time will be required to fully assess the potential of Ir as a point paleoflux tracer. Measured 187Os/188Os of the OJP sediments are systematically lower than the inferred 187Os/188Os of contemporaneous seawater and a clear glacial-interglacial 187Os/188Os variation is lacking. Mixing calculations suggest Os contributions from lithogenic sources are insufficient to explain the observed 187Os/188Os variations. The difference between the 187Os/188Os of bulk sediment and that of seawater is interpreted in terms of subtle contributions of unradiogenic Os carried by particulate extraterrestrial material. Down-core variations of 187Os/188Os with Pt/Ir and Os/Ir also point to contributions from extraterrestrial particles. Mixing calculations for each set of several triplicate analyses suggest that the unradiogenic Os end member cannot be characterized by primary extraterrestrial particles of chondritic composition. It is noteworthy that in efforts aimed at determining the effect of extraterrestrial contributions, 187Os/188Os of pelagic carbonates has greater potential compared to abundances of PGE. An attempt has been made for the first time to estimate sediment mass accumulation rates based on amount of extraterrestrial Os in the OJP samples and previously reported extraterrestrial Os flux. Throughout most of the OJP record, Os isotope-based paleoflux estimates are within a factor of two of those derived using other constant flux tracers. Meaningful flux estimates cannot be made during glacial maxima because the OJP sediments do not record the low 187Os/188Os reported previously. We speculate that this discrepancy may be related to focusing of extraterrestrial particles at the OJP, as has been suggested to explain down-core 3He variations.

(Tables 1-2) Composition of red coloured tills from Schobuell, Schleswig-Holstein and Møn Island, Denmark

The stratigraphic position of the glacially transported 'Scholle' (large-size erratic block) at Schobüll near Husum (Schleswig-Holstein) is now considered to be Devonian rather than 'Rotliegendes'. The 'Scholle', consisting of red clay and dolomite, is overlain by red-colored till without any flint but with up to 90% carbonate clasts (containing 15% dolomite), which indicates an eastern Baltic origin. The relationship of the 'Scholle' with the glacial till also points to an eastern Baltic origin for it, with up to 1 000 km transport distance.

Nondestructive measurement of water content and moisture migration of unsaturated red clays in South China

To reveal the moisture migration mechanism of the unsaturated red clays, which are sensitive to water content change and widely distributed in South China, and then rationally use them as a filling material for highway embankments, a method to measure the water content of red clay cylinders using X-ray computed tomography (CT) was proposed and verified. Then, studies on the moisture migrations in the red clays under the rainfall and ground water level were performed at different degrees of compaction. The results show that the relationship between dry density, water content, and CT value determined from X-ray CT tests can be used to nondestructively measure the water content of red clay cylinders at different migration time, which avoids the error reduced by the sample-to-sample variation. The rainfall, ground water level, and degree of compaction are factors that can significantly affect the moisture migration distance and migration rate. Some techniques, such as lowering groundwater table and increasing degree of compaction of the red clays, can be used to prevent or delay the moisture migration in highway embankments filled with red clays.

Pigmentos a base de Cobalto para aplicação em revestimentos cerâmicos

Ceramic pigments that own mainly the spinel structure AB2O4 are becoming a matter of great scientific and technological interest due to the ability of accommodate different cations in its structure, allowing different dopings and thus obtaining different colors. Studies on ceramic pigments currently are being directed to the development of stable and pigments obtained at low temperatures and with greater reproducibility. This work aims at the use of inorganic pigments for applications in ceramic tiles, investigating the influence of doping and calcination temperature on the coloring pigments and ceramic glazes. the based pigments of CoCr2O4, CoAl2O4, Co0,8Zn0,2Cr2O4 and Co0,8Zn0,2Al2O4 were synthesized by a chemical route using commercial gelatin as organic precursor. The materials were characterized by thermogravimetric analysis (TG), X-ray diffraction (XRD), infrared spectroscopy (FTIR) spectroscopy scanning electron microscopy (SEM) in the UVVisible region and colorimetry. The results confirmed the feasibility of synthesis used, the route presented pigments crystal structures and the desired phases were obtained from 500 °C with increased crystallinity and the crystallite size. The pigments have hues ranging from green to violet according to their doping and calcination temperatures.