Controle sanitário e ambiental de um projeto de reúso em um complexo de prédios corporativos

The study that resulted in this dissertation was developed at OU RNCE PETROBRAS, in Natal, which implemented a project of rational use and reuse of water, including use of wastewater from a Sewage Treatment Plant (STP) already in place, diluted with water from own wells for irrigation of green area of the building complex corporate enterprise. Establish a methodology that can serve as guidelines for future projects controlled reuse of water like this was the objective of this research. Been proposed, implemented and evaluated three instruments of sanitary and environmental control: 1) adaptation of sewage treatment plant and quality control of the treated effluent 2) analysis of soil-nutrient interaction in the irrigated area, 3) knowledge of the local hydrogeology, especially with regard to the direction of flow of the aquifer and location of collection wells of Companhia de Águas e Esgotos do Rio Grande do Norte (CAERN) situated in the surroundings. These instruments have proven sufficient and appropriate to ensure the levels of sanitary and environmental control proposed and studied, which were: a) control of water quality off the STP and the output of the irrigation reservoir, b) control of water quality sub surface soil and assessment of progress on soil composition, c) assessment of water quality in the aquifer. For this, we must: 1) establishing the monitoring plan of the STP and its effluent quality sampling points and defining the parameters of analysis, improve the functioning of that identifying the adequacy of flow and screening as the main factors of operational control, and increase the efficiency of the station to a relatively low cost, using additional filters, 2) propose, implement and adapt simple collectors to assess the quality of water percolating into the soil of the irrigated area, 3) determine the direction of groundwater flow in the area study and select the wells for monitoring of the aquifer.

Recycling of glass cullet as aggregate for clays used to produce roof tiles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

MICROBIOLOGICAL CONTAMINATION of A HEMODIALYSIS CENTER WATER DISTRIBUTION SYSTEM

The microbiological monitoring of the water used for hemodialysis is extremely important, especially because of the debilitated immune system of patients suffering from chronic renal insufficiency. To investigate the occurrence and species diversity of bacteria in waters, water samples were collected monthly from a hemodialysis center in upstate São Paulo and tap water samples at the terminal sites of the distribution system was sampled repeatedly (22 times) at each of five points in the distribution system; a further 36 samples were taken from cannulae in 19 hemodialysis machines that were ready for the next patient, four samples from the reuse system and 13 from the water storage system. To identify bacteria, samples were filtered through 0.22 mu m-pore membranes; for mycobacteria, 0.45 mu m pores were used. Conventional microbiological and molecular methods were used in the analysis. Bacteria were isolated from the distribution system (128 isolates), kidney machine water (43) and reuse system (3). Among these isolates, 32 were Gram-positive rods, 120 Gram-negative rods, 20 Gram-positive cocci and 11 mycobacteria. We propose the continual monitoring of the water supplies in hemodialysis centers and the adoption of effective prophylactic measures that minimize the exposure of these immunodeficient patients to contaminated sources of water.

Uma abordagem sistemática para implementação, gerenciamento e customização de testes de linhas de produto de software

Through the adoption of the software product line (SPL) approach, several benefits are achieved when compared to the conventional development processes that are based on creating a single software system at a time. The process of developing a SPL differs from traditional software construction, since it has two essential phases: the domain engineering - when common and variables elements of the SPL are defined and implemented; and the application engineering - when one or more applications (specific products) are derived from the reuse of artifacts created in the domain engineering. The test activity is also fundamental and aims to detect defects in the artifacts produced in SPL development. However, the characteristics of an SPL bring new challenges to this activity that must be considered. Several approaches have been recently proposed for the testing process of product lines, but they have been shown limited and have only provided general guidelines. In addition, there is also a lack of tools to support the variability management and customization of automated case tests for SPLs. In this context, this dissertation has the goal of proposing a systematic approach to software product line testing. The approach offers: (i) automated SPL test strategies to be applied in the domain and application engineering, (ii) explicit guidelines to support the implementation and reuse of automated test cases at the unit, integration and system levels in domain and application engineering; and (iii) tooling support for automating the variability management and customization of test cases. The approach is evaluated through its application in a software product line for web systems. The results of this work have shown that the proposed approach can help the developers to deal with the challenges imposed by the characteristics of SPLs during the testing process

BTS:uma ferramenta de suporte ao desenvolvimento sistemático de sistemas confiáveis baseados em componentes

The component-based development of systems revolutionized the software development process, facilitating the maintenance, providing more confiability and reuse. Nevertheless, even with all the advantages of the development of components, their composition is an important concern. The verification through informal tests is not enough to achieve a safe composition, because they are not based on formal semantic models with which we are able to describe precisally a system s behaviour. In this context, formal methods provide ways to accurately specify systems through mathematical notations providing, among other benefits, more safety. The formal method CSP enables the specification of concurrent systems and verification of properties intrinsic to them, as well as the refinement among different models. Some approaches apply constraints using CSP, to check the behavior of composition between components, assisting in the verification of those components in advance. Hence, aiming to assist this process, considering that the software market increasingly requires more automation, reducing work and providing agility in business, this work presents a tool that automatizes the verification of composition among components, in which all complexity of formal language is kept hidden from users. Thus, through a simple interface, the tool BST (BRIC-Tool-Suport) helps to create and compose components, predicting, in advance, undesirable behaviors in the system, such as deadlocks

Recovery of degraded areas using topsoil in the Amazon rainforest

This study is aimed at evaluating the effect of placing the top soil cover areas, such as tailings degraded by tin mining, in the Amazon rainforest in Brazil. The evaluations of the planting sites occurred in areas where tin mining was carried out, basically planting native trees over a period of seven years. This work did not come from a pre-decreed methodology of experimental design, and data was collected only seven years after planting. Thus, it was not possible to identify all variables that contributed to a better recovery of the areas. Sampling was done about seven years after placing the top soil and is determined: pH, organic matter content, P, K, Ca, Mg, Al, cation exchange capacity (T), base saturation (V%), B, Fe, Zn, Cu and Mn. The native forest species existing at the site were evaluated in relation to height (in meters) and diameter of the base. For all sites where the surface layer of soil was applied, there were significant differences in the growth of native species. A fundamental aspect in the rehabilitation of areas degraded by mining, in general, is the knowledge about the soil where that recovery must be conducted. The specific procedures in the rehabilitation of those areas depend essentially on the physical, chemical, biological and mineralogical properties of the soil, which must present conditions for the adequate development of the plants. The initial idea of implanting a project of recovery of soils degraded by mining in the Amazon Forest emerged from a first visit to the field, carried out in 1998. The conditions of the already mined areas, in comparison to the exuberant forest of the surroundings caught our attention. The mining company that acts in the area had already been trying for some time to implant a plan of recovery of these mining areas, however without reaching any significant positive results. The loss of organic matter is one of the main problems of degraded areas in Brazil. The storage and reuse of a blanket of soil (topsoil) produce excellent results, but most of the miners consider this technique expensive and difficult because of operational costs and the sharp topographical condition of the mine site. Therefore, a research project was elaborated prioritizing the recovery of the soil degraded by the tin mining as a prior step to the recovery activities with native forest species. The formation of a superficial pseudo-horizon that supported the vegetation and the time that it would take for its establishment became the main objective of this research. The objective of this work is to verify the levels of elements and their traces in areas where top soils were applied for the remediation of degraded areas with local re-vegetation. © 2011 WIT Press.

Contaminação das águas subterrâneas por nitrogênio devido à irrigação com efluente do tratamento de esgoto

Agriculture is an activity in which there is the possibility of using lower quality water and reuse appears as an alternative for irrigation. However, the negative environmental effects of reuse must be understood. The objective of the present work was to verify the potential of groundwater contamination by nitrogen duo to drip irrigation with effluent from domestic wastewater treatment. Three crop cycles of lettuce cv. Raider were conducted, the first between October and November 2009, the second in April and May 2010 and the third one in June and July 2010. The use of effluents was compared with potable water at accumulated water depths of 98.8 mm for the first, 98.4 mm for the second and 119 mm for the third cycle. Soil percolate concentrations of nitrate, nitrite and ammonia were studied at 0.25 m and 0.50 m depths in a completely randomized design. Percolate concentrations of nitrite and ammonia in soil irrigated with effluents showed no groundwater contamination risk. Nitrate however, caused concern, albeit with similar concentrations for both effluent and potable water.

Diagnóstico e avaliação do potencial energético dos resíduos gerados em uma indústria alimentícia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Imobilização e caracterização parcial de lipase produzida por Fusarium oxysporum em fermentação submersa

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Inventário do ciclo de vida do sistema de gerenciamento de resíduos sólidos urbanos do município de Piedade/SP e projeções de cenários para avaliação de impactos ambientais

Pós-graduação em Engenharia Civil e Ambiental - FEB

Reuso de água e energia em uma planta de nitrocelulose

Pós-graduação em Engenharia Mecânica - FEG

Tratamento de águas residuárias de suinocultura em reatores UASB e em batelada com fase aeróbia, em série, e reuso na produção de milho e sorgo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produção de biodiesel da gordura de murumuru (Astrocaryum murumuru) via catálise heterogênea

Neste trabalho investigou-se a viabilidade da oleaginosa Murumuru (Astrocaryum murumuru) como matéria prima para a produção de biodiesel através do uso de catálise heterogênea básica na transesterificação. O murumuru é um fruto constituído de polpa e amêndoa, sendo que esta produz cerca de 50% de uma gordura branca, inodora, com a vantagem de não rancificar facilmente, pois é rica em ácidos graxos saturados de cadeia curta como láurico e mirístico. O biodiesel convencionalmente é produzido através da rota catalítica básica homogênea. No entanto, essa rota apresenta algumas desvantagens, tais como: a saponificação dos ésteres e a dificuldade de remoção do catalisador. Por outro lado, a rota catalítica heterogênea evita os inconvenientes da catálise homogênea, reduzindo a quantidade de efluentes aquosos gerados no processo e a reutilização dos catalisadores. O catalisador heterogêneo hidrotalcita foi sintetizado e caracterizado através das análises de fluorescência de raios X, difratometria de raios X, análise termogravimétrica, análise textural (método BET) e microscopia eletrônica de varredura. Foi realizado um planejamento fatorial completo utilizando metanol como reagente. As variáveis independentes foram temperatura, razão molar e concentração de catalisador e a variável de resposta foi a conversão, medida através do método espectrofotométrico. Essas reações foram conduzidas em um reator batelada pressurizado. A melhor conversão encontrada a partir do planejamento foi de 88,97% para razão molar de metanol/óleo igual a 12, temperatura de 200ºC e concentração de catalisador igual a 6%, em 1 hora de reação. Para essa condição, foram realizados estudos cinéticos e testada a utilização de etanol, através do estudo cinético pode-se obter uma boa correlação entre as constantes cinéticas e conversão, quando utilizado o modelo que considera reação reversível, reação química como etapa controladora que segue o mecanismo de Eley Rideal.

Produtividade e qualidade dos frutos do tomateiro do grupo cereja cultivado em substratos à base de areia

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Analise do aproveitamento do glicerol no mercado brasileiro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)