Application of a building cost estimation model to the appraisal of the churches damaged by earthquakes in Lorca (Spain)

The objective of this paper is the development of a building cost estimation model whose purpose is to quickly and precisely evaluate rebuilding costs for historic heritage buildings affected by catastrophic events. Specifically, this study will be applied to the monumental buildings owned by the Catholic Church that were affected by two earthquakes on May 11, 2011 in the town of Lorca. To estimate the initial total replacement cost new, calculation model will be applied which, on the one hand, will use two-dimensional metric exterior parameters and, on the other, three-dimensional interior cubic parameters. Based on the total of the analyzed buildings, and considering damage caused by the seismic event, the final reconstruction cost for the building units ruined by the earthquakes can be estimated. The proposed calculation model can also be applied to other emergency scenarios and situations for the quick estimation of construction costs necessary for rebuilding historic heritage buildings which have been affected by catastrophic events that deteriorate or ruin their structural or constructive configuration.

Determinación de la distribución de tamaño y número de partículas provenientes de motores diesel operando en trafico real con equipos embarcados

El presente trabajo se propone determinar la distribución de tamaño y número de partículas nanométricas provenientes de motores diésel con equipos embarcados en tráfico extraurbano. Para ello, se utilizaron equipos de medición de última generación en condiciones promedio de conducción en tráfico extraurbano por más de 800 km a lo largo del trayecto Madrid-Badajoz-Madrid mediante un vehículo característico del parque automotor español y se implementaron métodos novedosos y pioneros en el registro de este tipo de emisiones. Todo ello abre el camino para líneas de investigación y desarrollo que contribuirán a entender, dimensionar y cualificar el comportamiento de las partículas, así como su impacto en la calidad de vida de la población. El estudio hace dos grandes aportes al campo. Primero, permite registrar las emisiones en condiciones transitorias propias del tráfico real. Segundo, permite mantener controladas las condiciones de medición y evita la formación aleatoria de partículas provenientes de material volátil, gracias al sistema de adecuación de la muestra de gases de escape incorporado. Como resultado, se obtuvo una muestra abundante y confiable que permitió construir modelos matemáticos para calcular la emisión de partículas nanométricas, ultrafinas, finas y totales sobre las bases volumétrica, espacial y temporal en función de la pendiente del perfil orográfico de la carretera, siempre y cuando esté dentro del intervalo ±5.0%. Estos modelos de cálculo de emisiones reducen tanto los costos de experimentación como la complejidad de los equipos necesarios, y fundamentaron el desarrollo de la primera versión de una aplicación informática que calcula las partículas emitidas por un motor diésel en condiciones de tráfico extraurbano ("Partículas Emitidas por Motores Diésel, PEMDI). ABSTRACT The purpose of this research is to determine the distribution of size and number of nanometric particles that come from diesel engines by means of on-board equipment in extra-urban traffic. In order to do this, cutting-edge measuring equipment was used under average driving conditions in extra-urban traffic for more than 800 km along the Madrid-Badajoz-Madrid route using a typical vehicle from Spain's automotive population and innovative, groundbreaking registering methods for this type of emissions were used. All this paves the way for lines of research and development which should help understand, measure and characterize the behavior of such particles, as well as their impact in the quality of life of the general population. The study makes two important contributions to the field. First, it makes it possible to register emissions under transient conditions, which are characteristic to real traffic. Secondly, it provides a means to keep the measuring conditions under control and prevents the random formation of particles of volatile origin through the built-in adjustment system of the exhaust gas sample. As a result, an abundant and reliable sample was gathered, which enabled the building of mathematical models to estimate the emission of nanometric, ultrafine, fine and total particles on volumetric, spatial and temporal bases as a function of the orographic outline of the road within a ±5.0% range. These emission estimating models lower both the experimentation costs and the required equipment's complexity, and they provided the basis for the development of a first software application version that estimates the particles emitted from diesel engines under extra-urban traffic conditions (Partículas Emitidas por Motores Diésel, PEMDI).

Temporal segmentation tool for high-quality real time video editing software

The increasing use of video editing software requires faster and more efficient editing tools. As a first step, these tools perform a temporal segmentation in shots that allows a later building of indexes describing the video content. Here, we propose a novel real-time high-quality shot detection strategy, suitable for the last generation of video editing software requiring both low computational cost and high quality results. While abrupt transitions are detected through a very fast pixel-based analysis, gradual transitions are obtained from an efficient edge-based analysis. Both analyses are reinforced with a motion analysis that helps to detect and discard false detections. This motion analysis is carried out exclusively over a reduced set of candidate transitions, thus maintaining the computational requirements demanded by new applications to fulfill user needs.

Building a decision support system with a knowledge modeling tool

Knowledge modeling tools are software tools that follow a modeling approach to help developers in building a knowledge-based system. The purpose of this article is to show the advantages of using this type of tools in the development of complex knowledge-based decision support systems. In order to do so, the article describes the development of a system called SAIDA in the domain of hydrology with the help of the KSM modeling tool. SAIDA operates on real-time receiving data recorded by sensors (rainfall, water levels, flows, etc.). It follows a multi-agent architecture to interpret the data, predict the future behavior and recommend control actions. The system includes an advanced knowledge based architecture with multiple symbolic representation. KSM was especially useful to design and implement the complex knowledge based architecture in an efficient way.

Optical characterisation of semi-transparent PV modules for building integration

A complete characterisation of PV modules for building integration is needed in order to know their influence on the building’s global energy balance. Specifically, certain characteristic parameters should be obtained for each different PV module suitable for building integrated photovoltaics (BIPV), some by direct or indirect measurements at the laboratory, and others by monitoring the element performance mounted in real operating conditions. In the case of transparent building envelopes it is particularly important to perform an optical and thermal characterization of the PV modules that would be integrated in them. This paper addresses the optical characterization of some commercial thin-film PV modules having different degrees of transparency, suitable for building integration in façades. The approach is based on the measurement of the spectral UV/Vis/NIR reflectance and transmittance of the different considered samples, both at normal incidence and as a function of the angle of incidence. With the obtained results, the total and zoned UV, visible and NIR transmission and reflection values are calculated, enabling the correct characterization of the PV modules integrated in façades and the subsequent evaluation of their impact over the electrical, thermal and lighting performance in a building.

Methodology for estimating building integrated photovoltaics electricity production under shadowing conditions and case study

Building integrated photovoltaic (BIPV) systems are a relevant application of photovoltaics. In countries belonging to the International Energy Agency countries, 24% of total installed PV power corresponds to BIPV systems. Electricity losses caused by shadows over the PV generator have a significant impact on the performance of BIPV systems, being the major source of electricity losses. This paper presents a methodology to estimate electricity produced by BIPV systems which incorporates a model for shading losses. The proposed methodology has been validated on a one year study with real data from two similar PV systems placed on the south façade of a building belonging to the Technical University of Madrid. This study has covered all weather conditions: clear, partially overcast and fully overcast sky. Results of this study are shown at different time scales, resulting that the errors committed by the best performing model are below 1% and 3% in annual and daily electricity estimation. The use of models which account for the reduced performance at low irradiance levels also improves the estimation of generated electricity.

Social Indicators in the Sustainable Refurbishment: Calculating Quality of Life Indicator in a Residential Building in Málaga

How can we measure ‘quality of life’? The sustainable refurbishment goes beyond strictly energy aspects. Sustainability indicators are needed to facilitate data collection and to provide information which does not require too time-consuming calculations. Thus, you can offer an idea of the extent and quality of the rehabilitation before starting the project and, also, the obtained results can be evaluated in an agile way after the refurbishment. From a list of social indicators gathered from different methods, sustainability assessment tools and International and European standards, three social indicators are proposed: Users Satisfaction, Participation Agreement and Quality of Life. This paper shows the development of Quality of Life social indicator, the more closely related to the main objectives of Researchand Development Project “Sustainable Refurbishment”: improving energy efficiency and wellbeing of users in existing residential buildings. Finally, this social indicator is applied to a real case study in Málaga (Spain).

Comparison of the seismic behaviour between three building tests, all based on a two storey model house

Integral Masonry System consisting of intersecting steel trusses alo ng each of the three dimensional directions of space on walls and slabs using any masonry material, had yet been backed up by the previous adobe test for seismic areas. This paper presents the comparison this last test and the adaptation of the IMS using h ollow brick. A prototype based on a two storey model house (6mx6mx6m) has being also built in two different scales in order to maximize the load and size of the shake table: the first one half size the whole building (3mx3mx3m) and the second, a quarter of the real size (3mx3mx6m). Both tests have suffered some mild to moderate damages while supporting the higher seismic action subjected by the shake table, without even fissuring the first test and with very few damages the second one. The thickness of the hollow brick wall and the diameter of the tree - dimensional truss reinforcement were scaled to the real size test in order to ascertain its great structural behaviour in relation to the previous structural model calculations. The aim of this study is to sum marize the results of the research collaboration between the ETSAM - UPM and the PUCP in whose laboratory these tests were carried out.

Integral energy behaviour of photovoltaic semi-transparent glazing elements for building integration

La hipótesis general que esta tesis quiere demostrar es que la integración arquitectónica de sistemas fotovoltaicos semitransparentes (STPV) puede contribuir a mejorar la eficiencia energética de los edificios. Por lo tanto, la investigación se centra en el desarrollo de una metodología capaz de cuantificar la reducción de la demanda energética del edificio proporcionada por estas novedosas soluciones constructivas. Al mismo tiempo, los parámetros de diseño de las soluciones STPV se han analizado para establecer cuales presentan el mayor impacto sobre el balance energético global del edificio y por lo tanto tienen que ser cuidadosamente definidos a la hora de optimizar el comportamiento energético del mismo. A la luz de estos objetivos, la metodología de estudio se ha centrado en tres puntos principales:  Caracterizar el comportamiento energético global de sistemas STPV en condiciones de operación realistas, similares a las que se darían en un sistema real;  Caracterizar el comportamiento energético global de sistemas STPV en condiciones controladas, con el objetivo de estudiar la variación del comportamiento del los elementos en función de parámetro de diseño y operación;  Evaluar el potencial de ahorro energético global de los sistemas STPV en comparación con soluciones acristaladas convencionales al variar de las condiciones de contorno constituidas por los parámetros de diseño (como el grado de transparencia), las características arquitectónicas (como el ratio entre superficie acristalada y superficie opaca en la fachada del edificio) y las condiciones climáticas (cubriendo en particular la climatología europea). En síntesis, este trabajo intenta contribuir a comprender la interacción que existe entre los sistemas STPV y el edificio, proporcionando tanto a los fabricantes de los componentes como a los profesionales de la construcción información valiosa sobre el potencial de ahorro energético asociado a estos nuevos sistemas constructivos. Asimismo el estudio define los parámetros de diseño adecuados para lograr soluciones eficientes tanto en proyectos nuevos como de rehabilitación. ABSTRACT The general hypothesis this work seeks to demonstrate is that the architectural integration of Semi-Transparent Photovoltaic (STPV) systems can contribute to improving the energy efficiency of buildings. Accordingly, the research has focused on developing a methodology able to quantify the building energy demand reduction provided by these novel constructive solutions. At the same time, the design parameters of the STPV solution have been analysed to establish which of them have the greatest impact on the global energy balance of the building, and therefore which have to be carefully defined in order to optimize the building operation. In the light of these goals, the study methodology has focused on three main points:  To characterise the global energy behaviour of STPV systems in realistic operating conditions, similar to those in which a real system will operate;  To characterise the global energy behaviour of STPV systems in controlled conditions in order to study how the performance varies depending on the design and operating parameters;  To assess the global energy saving potential of STPV systems in comparison with conventional glazing solutions by varying the boundary conditions, including design parameters (such as the degree of transparency), architectural characteristics (such as the Window to Wall Ratio) and climatic conditions (covering the European climatic conditions). In summary, this work has sought to contribute to the understanding of the interaction between STPV systems and the building, providing both components manufacturers and construction technicians, valuable information on the energy savings potential of these new construction systems and defining the appropriate design parameters to achieve efficient solutions in both new and retrofitting projects.

Urban wind energy: empirical optimization of high-rise building roof shape for the wind energy exploitation

El programa Europeo HORIZON2020 en Futuras Ciudades Inteligentes establece como objetivo que el 20% de la energía eléctrica sea generada a partir de fuentes renovables. Este objetivo implica la necesidad de potenciar la generación de energía eólica en todos los ámbitos. La energía eólica reduce drásticamente las emisiones de gases de efecto invernadero y evita los riesgos geo-políticos asociados al suministro e infraestructuras energéticas, así como la dependencia energética de otras regiones. Además, la generación de energía distribuida (generación en el punto de consumo) presenta significativas ventajas en términos de elevada eficiencia energética y estimulación de la economía. El sector de la edificación representa el 40% del consumo energético total de la Unión Europea. La reducción del consumo energético en este área es, por tanto, una prioridad de acuerdo con los objetivos "20-20-20" en eficiencia energética. La Directiva 2010/31/EU del Parlamento Europeo y del Consejo de 19 de mayo de 2010 sobre el comportamiento energético de edificaciones contempla la instalación de sistemas de suministro energético a partir de fuentes renovables en las edificaciones de nuevo diseño. Actualmente existe una escasez de conocimiento científico y tecnológico acerca de la geometría óptima de las edificaciones para la explotación de la energía eólica en entornos urbanos. El campo tecnológico de estudio de la presente Tesis Doctoral es la generación de energía eólica en entornos urbanos. Específicamente, la optimization de la geometría de las cubiertas de edificaciones desde el punto de vista de la explotación del recurso energético eólico. Debido a que el flujo del viento alrededor de las edificaciones es exhaustivamente investigado en esta Tesis empleando herramientas de simulación numérica, la mecánica de fluidos computacional (CFD en inglés) y la aerodinámica de edificaciones son los campos científicos de estudio. El objetivo central de esta Tesis Doctoral es obtener una geometría de altas prestaciones (u óptima) para la explotación de la energía eólica en cubiertas de edificaciones de gran altura. Este objetivo es alcanzado mediante un análisis exhaustivo de la influencia de la forma de la cubierta del edificio en el flujo del viento desde el punto de vista de la explotación energética del recurso eólico empleando herramientas de simulación numérica (CFD). Adicionalmente, la geometría de la edificación convencional (edificio prismático) es estudiada, y el posicionamiento adecuado para los diferentes tipos de aerogeneradores es propuesto. La compatibilidad entre el aprovechamiento de las energías solar fotovoltaica y eólica también es analizado en este tipo de edificaciones. La investigación prosigue con la optimización de la geometría de la cubierta. La metodología con la que se obtiene la geometría óptima consta de las siguientes etapas: - Verificación de los resultados de las geometrías previamente estudiadas en la literatura. Las geometrías básicas que se someten a examen son: cubierta plana, a dos aguas, inclinada, abovedada y esférica. - Análisis de la influencia de la forma de las aristas de la cubierta sobre el flujo del viento. Esta tarea se lleva a cabo mediante la comparación de los resultados obtenidos para la arista convencional (esquina sencilla) con un parapeto, un voladizo y una esquina curva. - Análisis del acoplamiento entre la cubierta y los cerramientos verticales (paredes) mediante la comparación entre diferentes variaciones de una cubierta esférica en una edificación de gran altura: cubierta esférica estudiada en la literatura, cubierta esférica integrada geométricamente con las paredes (planta cuadrada en el suelo) y una cubierta esférica acoplada a una pared cilindrica. El comportamiento del flujo sobre la cubierta es estudiado también considerando la posibilidad de la variación en la dirección del viento incidente. - Análisis del efecto de las proporciones geométricas del edificio sobre el flujo en la cubierta. - Análisis del efecto de la presencia de edificaciones circundantes sobre el flujo del viento en la cubierta del edificio objetivo. Las contribuciones de la presente Tesis Doctoral pueden resumirse en: - Se demuestra que los modelos de turbulencia RANS obtienen mejores resultados para la simulación del viento alrededor de edificaciones empleando los coeficientes propuestos por Crespo y los propuestos por Bechmann y Sórensen que empleando los coeficientes estándar. - Se demuestra que la estimación de la energía cinética turbulenta del flujo empleando modelos de turbulencia RANS puede ser validada manteniendo el enfoque en la cubierta de la edificación. - Se presenta una nueva modificación del modelo de turbulencia Durbin k — e que reproduce mejor la distancia de recirculación del flujo de acuerdo con los resultados experimentales. - Se demuestra una relación lineal entre la distancia de recirculación en una cubierta plana y el factor constante involucrado en el cálculo de la escala de tiempo de la velocidad turbulenta. Este resultado puede ser empleado por la comunidad científica para la mejora del modelado de la turbulencia en diversas herramientas computacionales (OpenFOAM, Fluent, CFX, etc.). - La compatibilidad entre las energías solar fotovoltaica y eólica en cubiertas de edificaciones es analizada. Se demuestra que la presencia de los módulos solares provoca un descenso en la intensidad de turbulencia. - Se demuestran conflictos en el cambio de escala entre simulaciones de edificaciones a escala real y simulaciones de modelos a escala reducida (túnel de viento). Se demuestra que para respetar las limitaciones de similitud (número de Reynolds) son necesarias mediciones en edificaciones a escala real o experimentos en túneles de viento empleando agua como fluido, especialmente cuando se trata con geometrías complejas, como es el caso de los módulos solares. - Se determina el posicionamiento más adecuado para los diferentes tipos de aerogeneradores tomando en consideración la velocidad e intensidad de turbulencia del flujo. El posicionamiento de aerogeneradores es investigado en las geometrías de cubierta más habituales (plana, a dos aguas, inclinada, abovedada y esférica). - Las formas de aristas más habituales (esquina, parapeto, voladizo y curva) son analizadas, así como su efecto sobre el flujo del viento en la cubierta de un edificio de gran altura desde el punto de vista del aprovechamiento eólico. - Se propone una geometría óptima (o de altas prestaciones) para el aprovechamiento de la energía eólica urbana. Esta optimización incluye: verificación de las geometrías estudiadas en el estado del arte, análisis de la influencia de las aristas de la cubierta en el flujo del viento, estudio del acoplamiento entre la cubierta y las paredes, análisis de sensibilidad del grosor de la cubierta, exploración de la influencia de las proporciones geométricas de la cubierta y el edificio, e investigación del efecto de las edificaciones circundantes (considerando diferentes alturas de los alrededores) sobre el flujo del viento en la cubierta del edificio objetivo. Las investigaciones comprenden el análisis de la velocidad, la energía cinética turbulenta y la intensidad de turbulencia en todos los casos. ABSTRACT The HORIZON2020 European program in Future Smart Cities aims to have 20% of electricity produced by renewable sources. This goal implies the necessity to enhance the wind energy generation, both with large and small wind turbines. Wind energy drastically reduces carbon emissions and avoids geo-political risks associated with supply and infrastructure constraints, as well as energy dependence from other regions. Additionally, distributed energy generation (generation at the consumption site) offers significant benefits in terms of high energy efficiency and stimulation of the economy. The buildings sector represents 40% of the European Union total energy consumption. Reducing energy consumption in this area is therefore a priority under the "20-20-20" objectives on energy efficiency. The Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings aims to consider the installation of renewable energy supply systems in new designed buildings. Nowadays, there is a lack of knowledge about the optimum building shape for urban wind energy exploitation. The technological field of study of the present Thesis is the wind energy generation in urban environments. Specifically, the improvement of the building-roof shape with a focus on the wind energy resource exploitation. Since the wind flow around buildings is exhaustively investigated in this Thesis using numerical simulation tools, both computational fluid dynamics (CFD) and building aerodynamics are the scientific fields of study. The main objective of this Thesis is to obtain an improved (or optimum) shape of a high-rise building for the wind energy exploitation on the roof. To achieve this objective, an analysis of the influence of the building shape on the behaviour of the wind flow on the roof from the point of view of the wind energy exploitation is carried out using numerical simulation tools (CFD). Additionally, the conventional building shape (prismatic) is analysed, and the adequate positions for different kinds of wind turbines are proposed. The compatibility of both photovoltaic-solar and wind energies is also analysed for this kind of buildings. The investigation continues with the buildingroof optimization. The methodology for obtaining the optimum high-rise building roof shape involves the following stages: - Verification of the results of previous building-roof shapes studied in the literature. The basic shapes that are compared are: flat, pitched, shed, vaulted and spheric. - Analysis of the influence of the roof-edge shape on the wind flow. This task is carried out by comparing the results obtained for the conventional edge shape (simple corner) with a railing, a cantilever and a curved edge. - Analysis of the roof-wall coupling by testing different variations of a spherical roof on a high-rise building: spherical roof studied in the litera ture, spherical roof geometrically integrated with the walls (squared-plant) and spherical roof with a cylindrical wall. The flow behaviour on the roof according to the variation of the incident wind direction is commented. - Analysis of the effect of the building aspect ratio on the flow. - Analysis of the surrounding buildings effect on the wind flow on the target building roof. The contributions of the present Thesis can be summarized as follows: - It is demonstrated that RANS turbulence models obtain better results for the wind flow around buildings using the coefficients proposed by Crespo and those proposed by Bechmann and S0rensen than by using the standard ones. - It is demonstrated that RANS turbulence models can be validated for turbulent kinetic energy focusing on building roofs. - A new modification of the Durbin k — e turbulence model is proposed in order to obtain a better agreement of the recirculation distance between CFD simulations and experimental results. - A linear relationship between the recirculation distance on a flat roof and the constant factor involved in the calculation of the turbulence velocity time scale is demonstrated. This discovery can be used by the research community in order to improve the turbulence modeling in different solvers (OpenFOAM, Fluent, CFX, etc.). - The compatibility of both photovoltaic-solar and wind energies on building roofs is demonstrated. A decrease of turbulence intensity due to the presence of the solar panels is demonstrated. - Scaling issues are demonstrated between full-scale buildings and windtunnel reduced-scale models. The necessity of respecting the similitude constraints is demonstrated. Either full-scale measurements or wind-tunnel experiments using water as a medium are needed in order to accurately reproduce the wind flow around buildings, specially when dealing with complex shapes (as solar panels, etc.). - The most adequate position (most adequate roof region) for the different kinds of wind turbines is highlighted attending to both velocity and turbulence intensity. The wind turbine positioning was investigated for the most habitual kind of building-roof shapes (flat, pitched, shed, vaulted and spherical). - The most habitual roof-edge shapes (simple edge, railing, cantilever and curved) were investigated, and their effect on the wind flow on a highrise building roof were analysed from the point of view of the wind energy exploitation. - An optimum building-roof shape is proposed for the urban wind energy exploitation. Such optimization includes: state-of-the-art roof shapes test, analysis of the influence of the roof-edge shape on the wind flow, study of the roof-wall coupling, sensitivity analysis of the roof width, exploration of the aspect ratio of the building-roof shape and investigation of the effect of the neighbouring buildings (considering different surrounding heights) on the wind now on the target building roof. The investigations comprise analysis of velocity, turbulent kinetic energy and turbulence intensity for all the cases.

A real case of a cognitive multiplayer game: design and development of the iOS client in Swift and its cloud architecture

as tecnologías emergentes como el cloud computing y los dispositivos móviles están creando una oportunidad sin precedentes para mejorar el sistema educativo, permitiendo tanto a los educadores personalizar y mejorar la experiencia de aprendizaje, como facilitar a los estudiantes que adquieran conocimientos sin importar dónde estén. Por otra parte, a través de técnicas de gamificacion será posible promover y motivar a los estudiantes a que aprendan materias arduas haciendo que la experiencia sea más motivadora. Los juegos móviles pueden ser el camino correcto para dar soporte a esta experiencia de aprendizaje mejorada. Este proyecto integra el diseño y desarrollo de una arquitectura en la nube altamente escalable y con alto rendimiento, así como el propio cliente de iOS, para dar soporte a una nueva version de Temporis, un juego móvil multijugador orientado a reordenar eventos históricos en una línea temporal (e.j. historia, arte, deportes, entretenimiento y literatura). Temporis actualmente está disponible en Google Play. Esta memoria describe el desarrollo de la nueva versión de Temporis (Temporis v.2.0) proporcionando detalles acerca de la mejora y adaptación basados en el Temporis original. En particular se describe el nuevo backend hecho en Go sobre Google App Engine creado para soportar miles de usuarios, asó como otras características por ejemplo como conseguir enviar noticaciones push desde la propia plataforma. Por último, el cliente de iOS en Temporis v.2.0 se ha desarrollado utilizando las últimas y más relevantes tecnologías, prestando especial atención a Swift (el lenguaje de programación nuevo de Apple, que es seguro y rápido), el Paradigma Funcional Reactivo (que ayuda a construir aplicaciones altamente interactivas además de a minimizar errores) y la arquitectura VIPER (una arquitectura que sigue los principios SOLID, se centra en la separación de asuntos y favorece la reutilización de código en otras plataformas). ABSTRACT Emerging technologies such as cloud computing and mobile devices are creating an unprecedented opportunity for enhancing the educational system, letting both educators customize and improve the learning experience, and students acquire knowledge regardless of where they are. Moreover, through gamification techniques it would be possible to encourage and motivate students to learn arduous subjects by making the experience more motivating. Mobile games can be a perfect vehicle to support this enhanced learning experience. This project integrates the design and development of a highly scalable and performant cloud architecture, as well as the iOS client that uses it, in order to provide support to a new version of Temporis, a mobile multiplayer game focused on ordering time-based (e.g. history, art, sports, entertainment and literature) in a timeline that currently is available on Google Play. This work describes the development of the new Temporis version (Temporis v.2.0), providing details about improvements and details on the adaptation of the original Temporis. In particular, the new Google App Engine backend is described, which was created to support thousand of users developed in Go language are provided, in addition to other features like how to achieve push notications in this platform. Finally, the mobile iOS client developed using the latest and more relevant technologies is explained paying special attention to Swift (Apple's new programming language, that is safe and fast), the Functional Reactive Paradigm (that helps building highly interactive apps while minimizing bugs) and the VIPER architecture (a SOLID architecture that enforces separation of concerns and makes it easy to reuse code for other platforms).

El vidrio y sus máscaras : el sueño de la arquitectura de cristal

Según Heidegger, la esencia de la arquitectura, de la construcción, descansa en un no espacio: en la materia con que se construyen las fronteras que otorgan espacios, irradiando sobre ellos aquello que los caracteriza. Si hay alguna materia, de las utilizadas por la arquitectura a lo largo de su historia para construir fronteras, que haya mantenido una especial relación con la luz y la visión, dando un carácter inconfundible a los espacios aviados por ellas, esta es el vidrio; algunas de las etimologías de su nombre: zakû (ser claro), hyalos (diáfano) o vitrum (ver), así lo evidencian. Posiblemente, sea la pregnancia de este modo fascinante de relacionarse con la luz, la que ha hecho del vidrio, a lo largo del tiempo que lleva siendo usado en arquitectura, y aún antes, el material que ha provocado en el imaginario humano la ilusión de ser aquel en que, en último término, podrían llegar a sublimarse todos los demás, dando lugar con ello a lo que en la tesis hemos denominado el sueño de la arquitectura de cristal. Siendo la luz, siempre, energía, consideraremos en la tesis luz-energía, a aquella que ilumina y calienta; es una luz científica y mesurable. Cuando la luz se “hace visible”, desvelando un mensaje “contenido” en el vidrio, hablaremos de luz-información. Esta luz, no puede medirse científicamente. La luz-energía y la luz-información, se manifiestan al conjuro de la arquitectura de vidrio. Es la segunda la que ha conformado las fronteras de vidrio enmascarado, y la que se estudia con más detenimiento en la tesis. Los distintos modos de usar en arquitectura la infinita combinatoria de las propiedades de absortancia, reflectancia, transmitancia y translucencia del vidrio, ha condicionado al hombre en su manera de “ver” el mundo. Unas veces, “inmerso” en él, puesto que solo lo separa del mismo, una frontera transparente, y “deseadamente” invisible: ese modo de usar el vidrio, ha sido el sueño imposible de una parte importante de la arquitectura del siglo XX. Otras veces, para “aislarse” de él, el hombre ha manipulado la luz y el vidrio para construir mundos diferentes. Las fronteras de vidrio enmascarado de color, mosaicos, vidrieras, pantallas y lo que hemos llamado vidrios complejos (con un cometido similar al que Schiller atribuía al coro en la tragedia griega, aislar a esta del “mundo real”, para mantener su libertad poética), son las fronteras que han construido el sueño posible de la arquitectura de cristal. Ambas actitudes, en distintos momentos de la historia de la arquitectura, han sido dos formas de querer materializar un mismo sueño. La capacidad del vidrio para adaptarse a tantos modos de presentarse ante nosotros, y a poder ser interpretado de tantas formas diferentes, es la que ha servido para dar título a la tesis, pues hasta en su faceta más transparente, el vidrio, de una forma o de otra, se ha mostrado siempre como un material enmascarado en el más amplio sentido de la palabra: se enmascara, incluso cuando apela a la transparencia o se convierte en espejo, para hacernos caer en la ilusión de que no está presente. Cuando el hombre construyó fronteras de vidrio e incluso antes, cuando soñó que con él podría llegar a construirlas, condensó en ellas toda la mítica, la mística y la epistemología en torno a la luz y la visión, dando lugar a una serie de arquetipos arquitectónicos. En la iglesia bizantina, la luz sobre, o la luz desde, los mosaicos, construyó una frontera titilante; y en la catedral gótica, la luz a través de las vidrieras construyó una frontera radiante; en ambos casos con el fin de alcanzar anagógicamente lo Inteligible. En el siglo XIX, con el descubrimiento de la electricidad y su incorporación a la arquitectura, las fronteras se vuelven fulgurantes, aviando, en este caso, el espacio urbano. Poco antes, en este mismo siglo, el espíritu del gótico tiene un efímero resurgir del que se nutrirá, a comienzos del siglo XX, el expresionismo cristalino, en el que la luz anagógica se hace laica. El espacio urbano fulgurante prefigurado por este movimiento y presente en las ciudades desde principios del siglo XX, fue potenciado a mediados de ese siglo con la aparición de las pantallas, extendiéndose desde entonces, imparable, por todo el planeta. La reciente emergencia de los vidrios complejos, ha abierto la posibilidad de construir fronteras a la carta (de vidrios de propiedades múltiples, seleccionadas de forma voluntaria y variable en cada momento). En principio, se pensó que, el uso de estos vidrios como cerramiento, podría llegar a constituirse como la panacea de los problemas del material relacionados con la luz-energía, sin necesidad de recurrir a “prótesis”, y manteniendo por tanto la seductora tersura de la fachada; aunque parece que, por ahora, esa posibilidad es, cuando menos, lejana. Sin embargo, en el campo de las megapantallas urbanas (y ,en general, en el de las pantallas de información), ubicuas actualmente en nuestras vidas, los vidrios complejos ayudan a construir los espesos velos de ilusión, que según Lefebvre sirven para mantener el capitalismo, siendo el último estadio de un desarrollo tecnológico, impuesto por el principio de economía del hombre, que como un metrónomo inexorable, y a modo de contrapunto, ha acompañado siempre (de nuevo en palabras de Lefebvre), a la necesidad del gasto, del juego, de la lucha, del arte, de la fiesta. La tecnología y el arte forman parte de la cultura producida por la sociedad y como señala Lévi-Strauss, esa cultura imprime orden; por el contrario, la sociedad, entendida como el conjunto de relaciones que los hombres mantienen entre sí, produce desorden. Del equilibrio entre esos extremos, surge el progreso, incluido el de la arquitectura. Las fronteras de vidrio que analizamos en la tesis –que avían espacios para la espiritualidad, el fasto y el espectáculo o, desde otro punto de vista, para las distintas manifestaciones del poder: la iglesia, la monarquía, el estado o el mercado– también han surgido de esa concomitancia entre el desorden y el orden; y forma parte de ese desorden, la aventura que ha impulsado al genio individual de místicos, alquimistas, geómetras, abades, reyes, inventores, poetas y arquitectos, a explorar, como escribe Apollinaire, vastos y extraños territorios donde el misterio en flor, se ofrece a quien quiera cogerlo, hogueras nuevas de colores nunca vistos, mil fantasmas imponderables a los que dar cuerpo. ABSTRACT According to Heidegger, the essence of architecture, building, lies in a non-space: the material that creates the boundaries from which something begins its presencing, radiating onto them that which characterizes them. If there is any single material amongst all those used throughout the history of architecture to build boundaries which has maintained a special relationship with light and vision, which has bestowed a distinctive character on spaces avid for them, it is glass. This is evidenced in some of its etymologies: zakû (to be clear), hyalos (transparent), vitrum (see). The rich potential of this fascinating way of relating to light in the history of the architectural use of glass, and even before, is possibly what has triggered the illusion in human imagination of being something that can ultimately sublimate all others, giving rise to what in this thesis we call The Dream of Crystal Architecture. Given that light is always energy, in this thesis we consider energy-light to be that which illuminates and warms. This is scientific, measurable light. When light "becomes visible" and reveals a message “contained” in glass, we speak of information-light. This light cannot be measured scientifically. Energy-light and information-light are manifested under the spell of glass architecture. The latter is what has shaped the boundaries of coloured glass, which is studied in this thesis. Architecture's different ways of using the infinite combinations of the absorptance, reflectance, transmittance and translucency of glass has affected the way we humans "see" the world. Sometimes we are "immersed" in it, since only an invisible, transparent boundary separates us from it: this use of glass has characterized a considerable part of 20th century architecture. In other cases, in order to "isolate" us from it, we have manipulated light and glass to build different worlds: the boundaries of glass "masked" by colour, mosaics, stained glass, screens and what we have called complex glazing, which plays a similar role to what Schiller attributed to the chorus in Greek tragedy, isolating it from the "real world" in order to maintain its poetic license. These are the boundaries that have built the viable dream of crystal architecture. These two approaches have been different ways of making same dream come true at different times in the history of architecture. The ability of glass to adapt to so many forms of manifestation, and interpretation, is what has given rise to the title of the thesis. Even in its most transparent facet, glass has one way or another always been a masking material in the broadest sense of the word: it is masked even when it invites transparency or becomes a mirror, triggering the illusion that it is not present. When man began to build glass boundaries, and even before, when he dreamed that he could build them, he condensed in them all the mythology, mysticism and epistemology concerning light and vision, which gave rise to a series of architectural archetypes. In the Byzantine church, light on or from mosaics created tenuous boundaries. In Gothic cathedrals, the light through the stained glass windows constructed radiant boundaries. In both cases the aim was to achieve, in an anagogical way, the Intelligible. In the 19th, the discovery of electricity and its use in architecture led to the production of dazzling boundaries, in this case employed in urban spaces. Earlier in the same century, the Gothic spirit had a short-lived revival, which in the early 20th century drew from crystalline expressionism in which anagogic light became secular. The dazzling urban space prefigured by this movement, present in cities since the early 20th century, was intensified in the mid-century with the emergence of screens, and since then it has spread unstoppably across the world. The recent emergence of complex glasses has made it possible to build boundaries on demand in glass with multiple properties, chosen at will and at whim at any time. Initially it was thought that the use of this glass as a wall could eventually become the panacea for the material problems related to energy-light, without needing to resort to "prosthesis" and thereby maintain the seductive smoothness of the facade. For now, that possibility seems remote, to say the least. In the realm of urban megascreens and information screens in general, now ubiquitous in our lives, complex glasses help to build the thick veils of illusion which, according to Lefebvre, serve to maintain capitalism. Like an inexorable metronome, in counterpoint, this ultimate state of technological development imposed by man's principle of economy has in fact always accompanied (again in the words of Lefebvre), the need to spend, play, fight, art, and party. Technology and art are part of the culture produced by society. As Levi-Strauss says, this culture imposes order. On the contrary, society, understood as a set of relationships amongst people, produces disorder. Progress, including that of architecture, arises from the balance between these two extremes. The glass boundaries analyzed in this thesis, which propitiate spaces for spirituality, pomp and spectacle or, from a different perspective, for the various manifestations of power: the church, the monarchy, the state and the market, have also emerged from the concomitance of order and disorder. One aspect of this disorder is the adventure that has inspired the individual genius of mystics, alchemists, surveyors, abbots, kings, inventors, poets and architects to explore, as Apollinaire says, vast, strange domains where flowering mystery offers itself to whoever wishes to pluck it, new fires, colours you have never seen before, a thousand intangible phantasms still awaiting reality.

Systematic Process for Building a Fault Diagnoser Based on Petri Nets Applied to a Helicopter

This work presents a systematic process for building a Fault Diagnoser (FD), based on Petri Nets (PNs) which has been applied to a small helicopter. This novel tool is able to detect both intermittent and permanent faults. The work carried out is discussed from theoretical and practical point of view. The procedure begins with a division of the whole system into subsystems, which are the devices that have to be modeled by using PN, considering both the normal and fault operations. Subsequently, the models are integrated into a global Petri Net diagnoser (PND) that is able to monitor a whole helicopter and show critical variables to the operator in order to determine the UAV health, preventing accidents in this manner. A Data Acquisition System (DAQ) has been designed for collecting data during the flights and feeding PN diagnoser with them. Several real flights (nominal or under failure) have been carried out to perform the diagnoser setup and verify its performance. A summary of the validation results obtained during real flight tests is also included. An extensive use of this tool will improve preventive maintenance protocols for UAVs (especially helicopters) and allow establishing recommendations in regulations

Análise da possível expansão internacional de empresas brasileiras de real estate residencial para o mercado costarriquenho, uma abordagem SWOT.

Devido ao crescimento e à experiência adquirida pelas empresas brasileiras de real estate residencial nos últimos anos, e às características próprias desse setor, os mercados internacionais poderiam ser considerados como possíveis alvos para essas empresas. Por exemplo, no mercado residencial costarriquenho, incentivos para projetos residenciais de alta densidade populacional, reformas nos processos para a obtenção dos alvarás de construção e mudanças demográficas e culturais, parecem propiciar um ambiente favorável para empresas dessa indústria. Portanto, o objetivo do presente trabalho é estudar uma possível expansão geográfica de empresas brasileiras de real estate no mercado residencial costarriquenho, a partir da estruturação de uma análise de abordagem SWOT dos elementos necessários para tal incursão. Para isso, realizou-se uma revisão bibliográfica na busca dos elementos estratégicos do ambiente interno de empresas de real estate residencial que devem ser considerados para processos de internacionalização, identificando-se 12 forças e 10 fraquezas desta revisão. Ademais, analisou-se: o mercado residencial; a macroeconomia, e as conjunturas político-legais e socioculturais da Costa Rica, na procura de fatores que devem ser tomados em conta por parte de empresas de real estate ao ingressar nesse país, distinguindo-se 24 oportunidades e 20 ameaças dessa análise. Para complementar o estudo, foi avaliada a atratividade do mercado residencial costarriquenho para receber investimentos por onze importantes empresas do setor de real estate residencial brasileiro, por meio de um questionário estruturado com os elementos identificados na primeira parte do trabalho. Os resultados mostraram que, no momento da avaliação, as empresas entrevistadas deram maior atenção ao tamanho do mercado e às características do sistema financeiro para o setor residencial, e identificaram a carência do conhecimento local e sua cultura empresarial, como os elementos que dificultariam sua internacionalização. Conclui-se sobre a possível internacionalização de empresas brasileiras de real estate residencial para o mercado da Costa Rica, que elementos desde uma perspectiva econômica racional e principalmente contingencial definem essa estratégia, não sendo viável nem vantajoso idealizar um processo de internacionalização nesse mercado, devido às atuais condições de seus mercados locais e aos elementos do ambiente interno que várias dessas empresas apresentam.

3D model based map building

Comunicación presentada en el IX Workshop de Agentes Físicos (WAF'2008), Vigo, 11-12 septiembre 2008.