Biodiesel de mamona no diesel interior e metropolitano em trator agrícola

A demanda de recursos energéticos pelos sistemas de produção, aliada à escassez dos combustíveis fósseis, tem motivado a produção do Biodiesel, que é um combustível obtido de fontes renováveis. O objetivo deste trabalho foi realizar dois ensaios: o primeiro dinâmico, para avaliar o desempenho operacional utilizando como parâmetro o consumo de combustível, e o segundo, estático, para mensurar a opacidade da fumaça (material particulado) do motor de um trator agrícola, operando com diesel metropolitano e interior misturados ao Biodiesel de mamona, em sete proporções. O trabalho foi conduzido no Departamento de Engenharia Rural da UNESP/Jaboticabal - SP. Os resultados mostraram que o tipo de diesel influenciou no consumo de combustível e na opacidade da fumaça, sendo o diesel metropolitano de melhor qualidade; observou-se, também, que à medida que a proporção de Biodiesel aumentou, o mesmo ocorreu para o consumo de combustível; entretanto, a opacidade da fumaça reduziu com o acréscimo de Biodiesel até B75.

Associação do óleo de mamona com Beauveria bassiana no controle da traça-das-crucíferas

O objetivo deste trabalho foi avaliar a eficiência, a estabilidade, a forma de aplicação e a compatibilidade do óleo de mamona com o fungo entomopatogênico Beauveria bassiana no controle da traça-das-crucíferas, Plutella xylostella. No primeiro experimento, foram avaliadas a eficiência, a estabilidade após 70 dias de armazenamento e a forma de aplicação do óleo de mamona. No segundo experimento, foi avaliada a compatibilidade do óleo de mamona com B. bassiana. A atividade inseticida do óleo de mamona é instável ao longo do tempo. O óleo de mamona é compatível com B. bassiana no controle de P. xylostella.

Efeito de épocas de colheita e período de repouso pós-colheita sobre as características físicas de frutos e sementes de mamoneira

This study aimed to assess the effect of harvesting times and of post-harvest resting period on physical characteristics of fruits and seeds of castor bean (AL Guarany 2002 genotype) and to verify if theses characteristics could be used to identify the ideal harvest time. Nine times of raceme harvest were assessed from 30 to the 142 days after anthesis (DAA) at fourteen days intervals, and four conditions of resting; (without and with seven days of resting period of seeds extracted (bare), from fruits and fixed to the racemes). It was evaluated water content, seed thickness, and length, width, and weight of fresh fruits and seeds, and seedling emergence in sand. The statistical design was completely randomized with four replications. The harvest times and the post-harvest rest period affected the physical characteristics of fruits and seeds of castor bean but none of these have proved to be effective in the identification of the ideal harvest time.

Teste de condutividade elétrica para sementes de mamoneira

The aim was to study the efficiency of electrical conductivity test in evaluating the quality of castor seeds. Emergence of seedlings was evaluated in the field, with five seed lots of cv. AL Guarany 2002. The seeds were submitted to the following tests: germination; first count of germination; accelerated aging (45 degrees C by 24 to 100% UR), emergence of seedlings in the field, rate of speed of development of seedlings and electrical conductivity, testing the periods (2, 4, 6, 8 and 24 hours) and the number of seeds (25,50 and 75) in 75ml of distilled water conditioning to 25 degrees C. A completely randomized design was used. The averages were compared by the Tukey test at 5%. The mean laboratory and field test data were correlated. Electrical conductivity test for 4 hours with 25 seeds and 6 hours with 50 seeds, and the rate of speed emergency proved efficient in the selection of lots vigor by providing information equivalent to the emergence of seedlings in the field.

Cultivares de mamoneira e adubação nitrogenada na formação de mudas

Objetivou-se com este trabalho avaliar a influência de nitrogênio no desenvolvimento de mudas de cultivares de mamona. O experimento foi conduzido em casa-de-vegetação, no Setor de Cafeicultura do Departamento de Agricultura da UFLA, Lavras, Estado de Minas Gerais, utilizando-se quatro doses de nitrogênio N (0, 150, 300 e 450 mg kg-1 de substrato) em três cultivares de mamona (AL-Guarani, Nordestina e Mirante-10). O delineamento experimental foi o de blocos casualizados com três repetições e duas plantas por parcela. Foram avaliados parâmetros referentes ao crescimento das mudas. de acordo com os resultados obtidos, a aplicação de nitrogênio prejudicou o crescimento das mudas em todas as cultivares avaliadas. A cultivar Mirante-10 destacou-se das demais.

Correlações genotípicas, fenotípicas e ambientais entre caracteres de mamoneira

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desempenho da mamoneira IAC 2028 em função do espaçamento entre fileiras e população de plantas na safrinha

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Espaçamento e população de plantas de mamoneira de porte baixo para colheita mecanizada

O objetivo deste trabalho foi avaliar o efeito do espaçamento entre fileiras e da população de plantas sobre a produtividade e outras características agronômicas da mamoneira de porte baixo, para a colheita mecanizada, na safra de verão. O experimento foi realizado durante os anos agrícolas 2007/2008 e 2008/2009, em um Latossolo Vermelho distroférrico, em Botucatu, SP, com uso da cultivar FCA-PB. Utilizou-se o delineamento de blocos ao acaso com parcelas subdivididas e quatro repetições. As parcelas foram constituídas por quatro espaçamentos entre fileiras (0,45, 0,60, 0,75 e 0,90m), e as subparcelas por quatro populações iniciais de plantas (25.000, 40.000, 55.000 e 70.000 plantas por hectare). O aumento da população de plantas, independentemente do espaçamento entre fileiras, diminuiu a sobrevivência de plantas, o diâmetro do caule, o número de racemos por planta e de frutos por racemo. As maiores produtividades de grãos e de óleo da cultivar FCA-PB são obtidas com populações iniciais entre 55.000 e 70.000 plantas por hectare, nos espaçamentos entre fileiras de 0,45 a 0,75 m.

Possibilidade de aplicação de misturas de herbicidas de ação total com Jato dirigido em mamoneira de porte anão

Com o objetivo de avaliar os efeitos da aplicação em jato dirigido com e sem proteção do bico de pulverização através de chapéu-de-napoleão para misturas de herbicidas de ação total na cultura da mamoneira de porte anão, na safra 2004/2005, um experimento foi conduzido no município de Garça-SP, utilizando-se o híbrido Lyra e espaçamento de 1,0 x 0,5 m. O delineamento experimental utilizado foi o de blocos casualizados, com tratamentos em esquema fatorial 2 x 10, com quatro repetições, em que o primeiro fator representou a forma de aplicação de jato dirigido com e sem uso de chapéu-de-napoleão e o segundo os herbicidas: glyphosate (0,72 kg ha-1); glyphosate + 2,4-D (0,72 + 0,35 kg ha-1); glyphosate + flumioxazin (0,72 + 0,025 kg ha-1); glyphosate + carfentrazone-ethyl (0,72 + 0,016 kg ha-1); glyphosate + diuron (0,72 + 0,75 kg ha-1); MSMA + diuron (1,44+ 0,75 kg ha-1); paraquat + diuron (0,9 kg ha-1); paraquat + diquat (0,20 + 0,20 kg ha-1); paraquat + bentazon (0,40 + 0,48 kg ha-1); e testemunha capinada. A aplicação dos herbicidas foi feita em pós-emergência das plantas daninhas, nas entrelinhas da cultura, utilizando-se pulverizador costal pressurizado com CO2, com uma ponta XR 8002-VS para o uso de chapéu-de-napoleão e duas pontas XR 11002-VS, espaçadas de 50 cm, para condição sem proteção, ambas com consumo de calda equivalente a 200 L ha-1. O herbicida glyphosate e as misturas de paraquat + bentazon, glyphosate + 2,4-D e paraquat + diquat proporcionaram os maiores níveis de produtividade da mamoneira Lyra quando aplicados em jato dirigido e com auxílio de chapéu-de-napoleão. As misturas paraquat + bentazon (0,40 + 0,48 kg ha-1) e paraquat + diquat (0,20 + 0,20 kg ha-1) demonstraram ser as mais indicadas para aplicação em jato dirigido com proteção do bico de pulverização.

Pré-condicionamento das sementes de mamoneira para o teste de tetrazólio

Preconditioning of castor bean seeds for the tetrazolium test. This research had the objective of standardizing the methodology for preconditioning of castor bean (Ricinus communis L.) seeds for the evaluation of their physiological potential by the tetrazolium test. The evaluated seed preconditioning methods were: seeds with coat between moist paper towel at 30, 35 and 40 degrees C for 6, 8, 10, 12, 14, 16 and 18 hours; and seeds without coat between moist paper towel; and seeds with coat immersed in water, at 25, 30, 35 and 40 degrees C for 1, 2, 3, 4, 5 and 6 hours. After preconditioning, the seed coat was removed, the seeds were cut lengthwise, and immersed in tetrazolium solution at a concentration of 0.2% for 120 minutes at 35 degrees C. The seeds' germination percentage, moisture content before and after preconditioning, and staining uniformity after the tetrazolium were evaluated. The statistical design was completely randomized, and the means comparisons were accomplished by the Tukey test at 0.05 level of probability. It was concluded that castor bean seeds should be preconditioned with coat between moist paper towel at 35 degrees C for 12 hours, so that the results of the tetrazolium test will be similar to those obtained in the germination test.

Estudo das propriedades termofísicas com variação da expansibilidade de compósito desenvolvido com matriz PUR-NOP e carga funcional de argilomineral

In this study were conducted experimental procedures for determination of variation of the expandability of rigid polyurethane foam (PUR) from a natural oil polyol (NOP), specifically the Castor oil plant, Ricinus communis, pure and additions of the vermiculite in phase dispersed in different percentage within a range from 0% to 20%, mass replacement. From the information acquired, were defined the parameters for production of bodies of test, plates obtained through controlled expansion, with the final volume fixed. Initially, the plates were subjected to thermal performance tests and evaluated the temperature profiles, to later be extracted samples duly prepared in accordance with the conditions required for each test. Was proceeded then the measurement of the coefficient of thermal conductivity, volumetric capacity heat and thermal diffusivity. The findings values were compared with the results obtained in the tests of thermal performance, contributing to validation of the same. Ultimately, it was investigated the influence that changes in physical-chemical structure of the material had exerted on the variation of thermophysical quantities through gas pycnometry, scanning electron microscopy (SEM) combined with energy dispersive X-ray fluorescence spectroscopy (EDXRF), infrared spectroscopy using Fourier transform (FTIR), thermogravimetric analysis (TGA) and differential thermal analysis (DTA). Based on the results obtained was possible to demonstrate that all load percentage analyzed promoted an increase in the potential expansion (PE) of the resin. In production of the plates, the composites with density near at the free expansion presented high contraction during the cure, being the of higher density adopted as definitive standard. In the thermal performance tests, the heating and cooling curves of the different composites had presented symmetry and values very close for lines of the temperature. The results obtained for the thermophysical properties of composites, showed little difference in respect of pure foam. The percentage of open pores and irregularities in the morphology of the composites were proportionate to the increment of vermiculite. In the interaction between the matrix and dispersed phase, there were no chemical transformations in the region of interface and new compounds were not generated. The composites of PUR-NOP and vermiculite presented thermal insulating properties near the foam pure and percentage significantly less plastic in its composition, to the formulation with 10% of load

Efficiency of seed treatment with fungicides in castor bean crop genotypes

With the objective of assessing castor bean genotypes in relation to the influence of seeds treatment on agronomic characteristics and physiological quality of seeds, two experiments were conducted between November, 2005 and March, 2006. In the first study, experimental design used was randomized complete blocks, in factorial scheme (2 x 10), by comparing Lyra hybrid and AL Guarany 2002 cultivar and nine fungicides, including its mixtures and test, with four repetitions. Plant height, stem diameter, medium yield and observation of diseases incidence were evaluated. In the second study, conducted in randomized entirely design, in factorial scheme 2 x 10 with four repetitions, Savana and AL Guarany 2002 genotypes were analyzed, using the same fungicides. Germination, infected and dead seeds, vigor, initial moisture content and simulation of field emergency and seeds sanitary quality were also evaluated. The results obtained point that there is positive influence of seed treatment on agronomic characteristics in castor bean crop, increasing grain yield for AL Guarany cultivar and Lyra hybrid. In the analysis of seed quality, it was observed that seed treatments with fungicides and their mixtures provided superior percentages of germination and vigor, reduced the number of infected and dead seeds and increased seeds emergency for Guarany 2002 cultivar and Savana hybrid.

Narrow row spacing and high plant population to short height castor genotypes in two cropping seasons

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nutrient extraction and exportation by castor bean hybrid lyra

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desenvolvimento de compósito de pu de mamona com carga de resíduo de couro para isolação térmica

The standardization of the bovine skin thickness in the leather industry generates a residue known as wet-blue . At the end of twentieth century, the brazilian industry discarded about 131 thousand tons of this residue in nature, provoking a great environmental liability. In this paper is presented the analyses of the termophysical properties, thermal and volumetric expansion performance of a composite of vegetable resin of castor oil plant (Ricinus communis) with load of industrial residue of leather "wet-blue", for application as thermal isolation material of warm surfaces. There were considered four percentile levels of residue load in the proportions in mass of 0%, 5%, 10% and 15%, added to the expansible resin of castor oil plant in two configurations: sawed leather and crushed leather in a smaller particle (powder) by grinding in a mill of balls. Twenty-one proof bodies were produced for termophysical properties analysis (three for each configuration) and four proof bodies for rehearsals of thermal acting. Analyses of thermal acting were done in test cameras. The results of the rehearsals were compared to those obtained considering the castor oil plant foam without residue addition. A small reduction of the thermal conductivity of the composite was observed in the proportion of 10% of leather residue in both configurations. Regarding thermal conductivity, calorific capacity and diffusivity, it was verified that the proposed composite showed very close values to the commercial insulating materials (glass wool, rock wool, EPS). It was still demonstrated the technical viability of the use of composite as insulating thermal for systems of low potency. The composite presented larger volumetric expansion with 15% of sawed residue of leather.