973 resultados para RICE HUSK ASH


Relevância:

80.00% 80.00%

Publicador:

Resumo:

To produce porcelain tiles fluxing agents are used in order to obtain a liquid phase during firing. This liquid phase fills the pores decreasing porosity, water absorption and contributes to material densification. In the porcelain tiles industry, feldspar is the main flux material used, with quantities ranging between 35 and 50%. Studies focus on the discovery of materials with flux characteristics that can reduce the consumption of feldspar by porcelain tiles industry. In this context, the coffee husk ashes, a residue obtained when coffee husks are burned to produce heat for the dryers during the processing of the green fruit, have as main chemical constituents potassium, calcium and magnesium, giving them characteristics of fluxing material. Brazil is the largest coffee producer in the world and is responsible for over 30% of the world s production. In this work a physical treatment of coffee husk ash was carried out in order to eliminate the organic matter and, after this, two by-products were obtained: residual wastes R1 and R2. Both residues were added separately as single fluxes and also in association with feldspar in mixtures with raw materials collected in a porcelain industry located in Dias d Ávila-Ba. The addition of these residues aimed to contribute to the reduction of the consumption of feldspar in the production of porcelain tiles. Specimens were produced with dimensions of 60 mm x 20 mm x 6 mm in an uniaxial die with compacting pressure of 45 MPa. The samples were heated to a temperature of 1200 °C, for 8 minutes. Tests were performed to characterize the raw materials by XRF, XRD, particle size analysis, DTA and TGA and, additionally, the results of the physical properties of water absorption, apparent porosity, linear shrinkage, density, dilatometry, flexural strength and SEM of sintered body were analyzed. Additions of less than 8% of the residue R1 contributed to the decrease of porosity, but the mechanical strength of the samples was not satisfactory. Additions of 5% the R2 residue contributed significantly to decrease the water absorption and apparent porosity, and also to increase the mechanical strength. Samples with addition of feldspar associated with the R2 residue, in proportions of 6.7% of R2 and 6.7% of feldspar, led to results of water absorption of 0.12% and mechanical strength of 46 MPa, having parameters normalized to the manufacture of porcelain stoneware tiles

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Brazil is the world s leading coffee producer. In 2008, 45.99 million of 60 kg bags of benefited coffee were produced. In the process of improvement 50% is grain and 50% is husk, thus, 1.38 million tons of coffee husk are produced annually. The husk is used as combustible in the drying and improvement ovens in the coffee farms, generating ash as residue. These ashes contain a high concentration of alkaline metals and earth metals, mainly K2O and CaO. This work studies the use of this residue in the ceramic tiles industry, as fluxing agents in substitution to the feldspar. Ten mixtures with equal ratios of clay and kaolin, proceeding from Bahia and the residue (varying from 30 to 5%) were defined and produced in uniaxial tool die of 60x20mm with approximately 5 mm of thickness and 45MPa compacting pressure. The samples were fired in four different temperatures: 1100 °C, 1150 °C, 1185 °C and 1200 °C during 60 minutes and characterized by means of X-ray fluorescence, X-ray diffraction, gravimetric thermal analysis and differential thermal analysis. The results of water absorption, apparent porosity, linear shrinkage, XRD, dilatometry, flexural strength and SEM were also analysed. The test specimen with addition of 10% of ash fired in 1200 °C resulted in 0.18% water absorption and 40.77 MPa flexural strength, being classified as porcelain stoneware tiles according to ABNT, UNI and ISO norms

Relevância:

80.00% 80.00%

Publicador:

Resumo:

O objetivo deste trabalho foi estudar o enraizamento de estacas semilenhosas de lichieira ( Litchi chinensis Sonn.) da cultivar Bengal, empregando ácido indolbutírico (AIB) e sistema de nebulização intermitente. As estacas apicais foram coletadas nos meses de outubro (Primavera), janeiro (Verão) e abril (Outono), acondicionadas adequadamente e transferidas para uma estufa com nebulização intermitente, onde receberam as aplicações de : 0; 1.000; 2.000; 3.000 e 4.000 mg L-1 de AIB, com imersão da base das estacas, durante 10 segundos, e de 200 mg L-1 de AIB, com imersão das bases por 24 horas, em aeração. em seguida, foram colocadas para enraizar em substrato de vermiculita, com casca de arroz carbonizada, na proporção de 1:1. Após 100 dias, foram obtidos os dados referentes à porcentagem de estacas vivas com folhas, porcentagem de estacas enraizadas por parcela, comprimento médio de raiz por estaca enraizada (cm), número médio de raízes formadas por estaca enraizada, massa média da matéria fresca das raízes (g), massa média da matéria seca das raízes(g). Pelos resultados, concluiu-se que não há necessidade da aplicação do AIB para o enraizamento de estacas de lichieira, cultivar Bengal, e que a melhor época de coleta das mesmas é o verão.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Basidyomycete Lentinula edodes has its related enzymatic activity mainly on the agribusiness waste kind used as a substrate. The objective of this work was to verify the activity of oxidative enzymes lacase (Lac), lignina peroxidase (LiP) and manganese peroxidase (MnP) of three L. edodes strains, in stationary system, cultivated the 25 degrees C, in the absence of light, in substrates wtih 20% of bran of rice, 1% of CaCO(3) and 79% of rice husk (CA), eucalyptus sawdust (SE), cassava bagasse (BM) and sugarcane bagasse (BC), adjusted to 60% of humidity. The Lac and MnP activities were bigger in eucalyptus sawdust (SE) and sugarcane bagasse (BC). The UP activity was not induced for tested substrates. The rice husk (CA) and cassava bagasse (BM) Substrates, although are not adequate to produce Lac or MnP, can be used as additives to increase the porosity, air availability and easy metabolism polysaccharides.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

O trabalho foi desenvolvido no Departamento de Produção Vegetal - Setor Horticultura da Faculdade de Ciências Agronômicas (FCA) da Universidade Estadual Paulista Júlio de Mesquita Filho (UNESP), Campus de Botucatu (SP) com o objetivo de avaliar a influência de diferentes substratos e tipos de recipientes no potencial de enraizamento de estacas lenhosas de pessegueiro cultivar Okinawa com diferentes diâmetros. As estacas foram tratadas com 2,5g L-1 de ácido indol-butírico. O período de permanência das estacas na casa de vegetação foi de 50 dias. Os tratamentos consistiram de seis substratos: areia, casca de arroz carbonizada, vermiculita, areia + casca de arroz carbonizada, areia + vermiculita e casca de arroz carbonizada + vermiculita, com as misturas na proporção 1:1v/v, três tipos de recipientes: sacos plásticos, bandejas de poliestireno expandido e bandejas plásticas e dois grupos de estacas com diâmetros diferentes: 2 a 6mm e 6 a 10mm. O melhor resultado de enraizamento foi obtido em sacos plásticos com vermiculita independente do diâmetro das estacas.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

As bromélias apresentam formas exóticas com uma grande diversidade de cores e de flores, constituindo importantes espécies para uso em paisagismo e floricultura. em conseqüência disto, são muito comercializadas. Porém, parte das plantas que se encontram no mercado, ainda são provenientes do extrativismo. Esta situação é também reflexo do pequeno número de informações sobre técnicas de propagação e cultivo. Uma das limitações é o desconhecimento do tipo de substrato e adubação adequados ao cultivo destas espécies. Assim, o objetivo deste trabalho foi avaliar o crescimento de bromélias do Neoregelia cruenta, cultivadas em diferentes substratos e adubações foliares através da altura, do número de folhas, da matéria fresca e seca, da parte aérea e das raízes. As mudas utilizadas foram provenientes de cultura de tecidos. Após um período de pré-aclimatização, foram transplantadas para estufa sem nebulização. Os substratos foram constituídos da mistura de diferentes proporções de solo, areia, casca de arroz carbonizada e por um substrato comercial à base de vermiculita. Aos substratos foi aplicada adubação foliar, combinando uréia e sacarose, em intervalos de quinze dias. Os resultados obtidos mostraram que as interações entre os substratos, dose de sacarose e de uréia, não afetaram a altura das mudas e o número de folhas. O uso de sacarose também não influenciou o desenvolvimento das mudas. O substrato comercial à base de vermiculita, independente da aplicação de adubação foliar, proporcionou maior altura das mudas e número de folhas. A aplicação de uréia apresentou efeito linear crescente durante o período avaliado.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The composition of substrates with different sources of organic matter is considered as a key factor to obtain seedlings of good quality. Then, this study aimed to evaluate the best source and the best quantity of organic matter that should be used in order to produce barbados cherry (Malpighia emarginata DC.) seedlings of good quality. A factorial arrangement of four (20: 80, 40: 60, 60:40 and 80:20% of organic matter: earth) by four (earthworm compost, burnt rice husk, powdered coconut husk and carnauba straw) levels was used and it was designed in randomized blocks with four replicates. The nitrogen, phosphorus, potassium and calcium content of the leaves and stems were quantified in the dry tissue. The results showed that the proportion 80% of earthworm compost: 20% of earth allowed good development of the plants and sufficient accumulation of N, P, K and Ca. Burnt rice husk, powdered coconut husk and carnauba straw have not generated seedlings of good quality.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Propagation by hardwood cuttings is an important technique for producing plant of many species. The technique is usually easy and inexpensive and makes it possible to high plants. But it is not commonly used for peach propagation in Brazil. The objective of this study was to evaluate the effects of different substrates, container types and cutting diameters on rooting of peach hardwood cuttings. The cuttings (two size groups, diameters of 2-6 mm and 6-10 mm) were inserted in six substrates (carbonized rice husk, vermiculite, washed sand, carbonized rice husk + vermiculite, carbonized rice husk + washed sand and vermiculite + washed sand, each 1:1 v/v), each in three types of containers (plastic bag, plastic tray and polystyrene tray). The best rooting occurred with smaller cuttings (47%) and larger cuttings (38%) in plastic bag with vermiculite, and with smaller cuttings in plastic bag with washed sand + vermiculite (33%). While these rooting percentages were unsatisfactory for commercial propagation, the results are encouraging and suggest need for more investigation to improve rooting.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Currently, there is worldwide interest in the technological use of agro-industrial residues as a renewable source of food and biofuels. Lignocellulosic materials (LCMs) are a rich source of cellulose and hemicellulose. Hemicellulose is rich in xylan, a polysaccharide used to develop technology for producing alcohol, xylose, xylitol and xylo-oligosaccharides (XOSs). The XOSs are unusual oligosaccharides whose main constituent is xylose linked by β 1-4 bonds. The XOS applications described in this paper highlight that they are considered soluble dietary fibers that have prebiotic activity, favoring the improvement of bowel functions and immune function and having antimicrobial and other health benefits. These effects open a new perspective on potential applications for animal production and human consumption. The raw materials that are rich in hemicellulose include sugar cane bagasse, corncobs, rice husks, olive pits, barley straw, tobacco stalk, cotton stalk, sunflower stalk and wheat straw. The XOS-yielding treatments that have been studied include acid hydrolysis, alkaline hydrolysis, auto-hydrolysis and enzymatic hydrolysis, but the breaking of bonds present in these compounds is relatively difficult and costly, thus limiting the production of XOS. To obviate this limitation, a thorough evaluation of the most convenient methods and the opportunities for innovation in this area is needed. Another challenge is the screening and taxonomy of microorganisms that produce the xylanolytic complex and enzymes and reaction mechanisms involved. Among the standing out microorganisms involved in lignocellulose degradation are Trichoderma harzianum, Cellulosimicrobium cellulans, Penicillium janczewskii, Penicillium echinulatu, Trichoderma reesei and Aspergillus awamori. The enzyme complex predominantly comprises endoxylanase and enzymes that remove hemicellulose side groups such as the acetyl group. The complex has low β-xylosidase activities because β-xylosidase stimulates the production of xylose instead of XOS; xylose, in turn, inhibits the enzymes that produce XOS. The enzymatic conversion of xylan in XOS is the preferred route for the food industries because of problems associated with chemical technologies (e.g., acid hydrolysis) due to the release of toxic and undesired products, such as furfural. The improvement of the bioprocess for XOS production and its benefits for several applications are discussed in this study. © 2012 Elsevier Ltd.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Mecânica - FEG

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The steady increase in the price of oil and its derivatives, carbon credits, the concern with the environment combined with the precipitation of rain water and lack of water resources that Brazil has suffered in 2014 caused a migration of participation sources of energy in the Brazilian energy matrix. The hydropower sector suffered big drop at 2013 and is suffering so far, contributing thus to the generation and cogeneration of thermal energy using renewable energy sources such as: sugarcane bagasse, wood chips, rice husks, among others. The selling price of the electricity market reached the level of R$ 807, 00 MWh in January 2014 (Source: ANEEL), heating the Brazilian thermoelectric sector. Although thermoelectric use in bulk water as vaporizing fluid to produce electricity and use in various processes, water reuse plans have become an important factor in these industries. The increased use of biomass has been the bagasse which is allied to the sugarcane sector, strong market in Brazil, and consists basically use the rest of sugar cane, sugarcane industries that would play out. The sugar and ethanol industry is very unstable and only lasts for 6-8 months a year, and the remaining time in the period known as between crop that corresponds to the planting and harvesting of sugarcane and then enter the period of vintage which is the constant cane harvesting and crushing it. This instability of the market and the thermoelectric idle period leads the thermoelectric industries to seek other sources of renewable energy, such as wood chips (pine, Eucalyptus, Orange), rice husk, sorghum among others, to not be dependent on alcohol sector. The present work aims to study the use of wood chips as an alternative biomass for burning a fuel that essentially uses bagasse, the thermoelectric in question consists of two boilers that produce together 350 t / h ... (Complete Abstract click electronic access below)