Implementing innovation in construction: Contexts, relative boundedness and actor-network theory

Theoretical understanding of the implementation and use of innovations within construction contexts is discussed and developed. It is argued that both the rhetoric of the 'improvement agenda' within construction and theories of innovation fail to account for the complex contexts and disparate perspectives which characterize construction work. To address this, the concept of relative boundedness is offered. Relatively unbounded innovation is characterized by a lack of a coherent central driving force or mediator with the ability to reconcile potential conflicts and overcome resistance to implementation. This is a situation not exclusive to, but certainly indicative of, much construction project work. Drawing on empirical material from the implementation of new design and coordination technologies on a large construction project, the concept is developed, concentrating on the negotiations and translations implementation mobilized. An actor-network theory (ANT) approach is adopted, which emphasizes the roles that both human actors and non-human agents play in the performance and outcomes of these interactions. Three aspects of how relative boundedness is constituted and affected are described; through the robustness of existing practices and expectations, through the delegation of interests on to technological artefacts and through the mobilization of actors and artefacts to constrain and limit the scope of negotiations over new technology implementation.

ENABLE - a view on user's needs

The ENABLE project, which is partly funded by the European Commission, aims to assist elderly people to live well, independently and at case. In this project a wrist unit with both integrated and external sensors, and with a radio frequency link to a mobile phone. will be developed. ENABLE will provide a number of services for elderly people. among them also a remote control service for the home environment. This paper briefly describes the project in general and then focuses on the initial user needs investigation which was carried Out in early 2007 in six different European countries. The provisional findings are discussed and an outlook on the ongoing and future project work is given. A special focus of this paper is on the environmental control service.

Re-thinking stakeholder management in construction: theory & research

From its roots in strategic management theory, stakeholder management has been adopted by the construction management academic community and applied as a valid paradigm around which research work has been generated aiming to improve project effi ciencies and effectiveness. However, academics have argued that stakeholder management should move away from purely theoretical discussions and engage more with the realities of construction project work. This paper re-appraises the stakeholder management concept for the construction domain by re-thinking some of the fundamental principles and ideals present within the more general stakeholder theory literature. It engages with issues which researchers have arguably failed to acknowledge and calls for a re-evaluation of construction stakeholder management research by presenting a review around four distinctive themes: the moral obligations of engaging with stakeholders against the business and efficiency driven imperatives of construction organisations; the contrast between theoretical abstractions and empirically grounded research; the tensions between theoretical convergence versus calls for multiple and divergent perspectives on stakeholder management and the practicalities of conducting stakeholder management in the construction domain. Such a critical re-appraisal of stakeholder management thinking both generates new lines of enquiry and promises to help inform and shape current and future industry practice.

Managing non-standard international experience: evidence from a Finnish company

Purpose – This paper extends the increasing debates about the role of international experience through mechanisms other than standard expatriation packages, in particular through the use of short-term assignments. It explores the different forms of short-term assignments (project work, commuter assignments, virtual international working and development assignments) and the different sets of positive and negative implications these can have for the company and the individuals concerned. The integration-differentiation debate is reflected here as elsewhere in IHRM, with the company moving towards greater centralization and control of its use of these assignments. Design/methodology/approach – Since the research is exploratory, we adopted a qualitative approach to get a more in-depth understanding on the realities the corporations and the assignees are facing. The study was implemented through a single case study setting in which the data were collected by interviewing (n=20) line managers, human resource management (HRM) staff and assignees themselves. In addition corporate documentation and other materials were reviewed. Findings – The present case study provides evidence about the characteristics of short-term assignments as well as the on the management of such assignments. The paper identifies various benefits and challenges involved in the use of short-term assignments both from the perspectives of the company and assignees. Furthermore, the findings support the view that a recent increase in the popularity of short-term assignments has not been matched by the development of HRM policies for such assignments. Research limitations/implications – As a single case study, limitations in the generalizability of the findings should be kept in mind. More large-scale research evidence is needed around different forms of international assignments beyond standard expatriation in order to fully capture the realities faced by international HRM specialists Practical implications – The paper identifies many challenges but also benefits of using short-term assignments. The paper reports in-depth findings on HR development needs that organizations face when expanding the use of such assignments. Social implications – The paper identifies many challenges but also benefits of using short-term assignments. The paper reports in-depth findings on HR development needs that organizations face when expanding the use of such assignments. Originality/value – Empirical research on short-term assignments is still very limited. In that way the paper provides much needed in-depth evidence on why such assignments are used, what challenges are involved in the use of such assignments and what kinds of HR-development needs are involved.

MACHINE VISION FOR AUTOMATICVISUAL INSPECTION OF WOODENRAILWAY SLEEPERS USING UNSUPERVISED NEURAL NETWORKS

The motivation for this thesis work is the need for improving reliability of equipment and quality of service to railway passengers as well as a requirement for cost-effective and efficient condition maintenance management for rail transportation. This thesis work develops a fusion of various machine vision analysis methods to achieve high performance in automation of wooden rail track inspection.The condition monitoring in rail transport is done manually by a human operator where people rely on inference systems and assumptions to develop conclusions. The use of conditional monitoring allows maintenance to be scheduled, or other actions to be taken to avoid the consequences of failure, before the failure occurs. Manual or automated condition monitoring of materials in fields of public transportation like railway, aerial navigation, traffic safety, etc, where safety is of prior importance needs non-destructive testing (NDT).In general, wooden railway sleeper inspection is done manually by a human operator, by moving along the rail sleeper and gathering information by visual and sound analysis for examining the presence of cracks. Human inspectors working on lines visually inspect wooden rails to judge the quality of rail sleeper. In this project work the machine vision system is developed based on the manual visual analysis system, which uses digital cameras and image processing software to perform similar manual inspections. As the manual inspection requires much effort and is expected to be error prone sometimes and also appears difficult to discriminate even for a human operator by the frequent changes in inspected material. The machine vision system developed classifies the condition of material by examining individual pixels of images, processing them and attempting to develop conclusions with the assistance of knowledge bases and features.A pattern recognition approach is developed based on the methodological knowledge from manual procedure. The pattern recognition approach for this thesis work was developed and achieved by a non destructive testing method to identify the flaws in manually done condition monitoring of sleepers.In this method, a test vehicle is designed to capture sleeper images similar to visual inspection by human operator and the raw data for pattern recognition approach is provided from the captured images of the wooden sleepers. The data from the NDT method were further processed and appropriate features were extracted.The collection of data by the NDT method is to achieve high accuracy in reliable classification results. A key idea is to use the non supervised classifier based on the features extracted from the method to discriminate the condition of wooden sleepers in to either good or bad. Self organising map is used as classifier for the wooden sleeper classification.In order to achieve greater integration, the data collected by the machine vision system was made to interface with one another by a strategy called fusion. Data fusion was looked in at two different levels namely sensor-level fusion, feature- level fusion. As the goal was to reduce the accuracy of the human error on the rail sleeper classification as good or bad the results obtained by the feature-level fusion compared to that of the results of actual classification were satisfactory.

Conceptual Product Development in Small Corporations

The main objective of the thesis “Conceptual Product Development in Small Corporations” is by the use of a case study test the MFD™-method (Erixon G. , 1998) combined with PMM in a product development project. (Henceforth called MFD™/PMM-method). The MFD™/PMM-method used for documenting and controlling a product development project has since it was introduced been used in several industries and projects. The method has been proved to be a good way of working with the early stages of product development, however, there are almost only projects carried out on large industries which means that there are very few references to how the MFD™/PMM-method works in a small corporation. Therefore, was the case study in the thesis “Conceptual Product Development in Small Corporations” carried out in a small corporation to find out whether the MFD™/PMM-method also can be applied and used in such a corporation.The PMM was proposed in a paper presented at Delft University of Technology in Holland 1998 by the author and Gunnar Erixon. (See appended paper C: The chart of modular function deployment.) The title “The chart of modular function deployment” was later renamed as PMM, Product Management Map. (Sweden PreCAD AB, 2000). The PMM consists of a QFD-matrix linked to MIM (Module Indication Matrix) via a coupling matrix which makes it possible to make an unbroken chain from the customer domain to the designed product/modules. The PMM makes it easy to correct omissions made in creating new products and modules.In the thesis “Conceptual Product Development in Small Corporations” the universal MFD™/PMM-method has been adapted by the author to three models of product development; original-, evolutionary- and incremental development.The evolutionary adapted MFD™/PMM-method was tested as a case study at Atlings AB in the community Ockelbo. Atlings AB is a small corporation with a total number of 50 employees and an annual turnover of 9 million €. The product studied at the corporation was a steady rest for supporting long shafts in turning. The project team consisted of management director, a sales promoter, a production engineer, a design engineer and a workshop technician, the author as team leader and a colleague from Dalarna University as discussion partner. The project team has had six meetings.The project team managed to use MFD™ and to make a complete PMM of the studied product. There were no real problems occurring in the project work, on the contrary the team members worked very well in the group, having ideas how to improve the product. Instead, the challenge for a small company is how to work with the MFD™/PMM-method in the long run! If the MFD™/PMM-method is to be a useful tool for the company it needs to be used continuously and that requires financial and personnel resources. One way for the company to overcome the probable lack of recourses regarding capital and personnel is to establish a good cooperation with a regional university or a development centre.

Integrated Product Development in Truck Industry - A Case Study on Product Development Processes

This paper presents the result from a case study at Scania on product development processes. The objective with the case study was to gather information on Scania’s product development process (PDP) including the use of CAD and simulation tools, and project work. The objective was also to find any deviations or different interpretations among the employees on the PDP. To gather the information, semi-structured tape-recorded interviews have been used to ensure that individual interpretations from the interviewees could be gathered. Scania uses a defined and structured PDP which facilitates concurrent and cross-functional work. The PDP is implemented and followed to various degrees. The newly employed personnel may have difficulties with communication, both to find and to give information. Although, newly graduated personnel may find it easier to adapt to changes, and also to use a structured process which they have studied at universities. It was also known during the case study that the PDP is a major support for the newly employed personnel, which in turn decreases the time to get into the same working process as the more experienced personnel. Employees with decades of experience know the right sources from which to both give and gather information. Also, the terminology and definitions in the product development process may not be used as intended. This makes it difficult for other project members or teams who need to interpret the information received. At the same time, the routines among the more experienced personnel, which have been set-up throughout the years, make them more inflexible in adapting changes. The findings in the case study as well as challenges with implementing the PDP are known to Scania and are a part of the continuing work with improvement.

O serviço social na previdência social: a afirmação do seu espaço na materialização dos direitos

The work of the professional of social worker in social security policy, it is seen wrapped in an adverse situation to consolidate the ethical-political project work, marked by the materialization of the neoliberal policy essentially promotes the reduction of social rights historically achieved by the class struggle worker. In this sense, with the aim of analyzing the statement of work of the Social Worker in Social Security, their struggles and challenges to the realization of rights, against the current situation is that it renders the theoretical basis of the discussions to be fought. Thus, we performed procedures such as methodological research literature and documents in detail of our analytical categories in order to base the discussion on social security policy. The survey area covered was the Executive Management of Social Security Mossoró and Natal, representing a total of 07 (seven) surveyed social workers who work in the Department of Social Work. Thus, the research allowed us a comparison with the work of Social Workers and this allowed us to reach some conclusions: first, the fact that Social Security does not guarantee in its entirety, the conditions necessary for the work of Social Worker, taking into account the lack of human and material resources for its realization, and the virtual absence of professional secrecy, and second, that the social workers surveyed say the ethical-political project of Social Work, in exercise professional from engaging in projects and social movements related to the protection of social rights and working class, thirdly, that the statement of professional design, contributes to the formation of a new professional activities, based on an analysis of whole and an action more interventionist, critical and purposeful, able to relate to the interests of users who seek their services, the consolidation and socialization of social rights. Thus, the direction of the work of professional of social worker to support the theoretical and methodological maturity in recent years acquired the expertise and ethical-political daily, consolidated its space in claiming social security institution, the rights so hard fought in an environment grounded in the disintegration social struggles

A formação do professor de matemática e o trabalho com projetos na escola

O objetivo do presente texto é apresentar os resultados de uma pesquisa que procurou discutir a formação dos professores de Matemática que trabalham com projetos e documentar a maneira da implementação dessa proposta na escola. Os dados são provenientes de entrevistas com dez professores de Matemática, os quais atuam no Ensino Fundamental ou Médio. Seus relatos possibilitam identificar três formas diferentes de trabalhos com projetos: i) individualmente e por iniciativa própria; ii) por sugestão da escola, de forma fragmentada; iii) coletivamente. Não há indícios de que a formação inicial desses professores os tenha influenciado a trabalhar com projetos. Esse preparo foi construído ao longo de suas carreiras, através da participação em cursos de formação continuada, da experiência com a prática e das interferências de suas características pessoais.

Internet e formação de professores de matemática: desafios e possibilidades

Pós-graduação em Educação Matemática - IGCE

Professores de matemática que trabalham com projetos nas escolas: quem são eles?

Pós-graduação em Educação Matemática - IGCE

O desenvolvimento da matemacia no trabalho com projetos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Políticas públicas educacionais: prática musical na escola pública paulista

Pós-graduação em Música - IA

Trabalho com projetos na formação inicial de professores de matemática na perspectiva da educação inclusiva

Pós-graduação em Educação Matemática - IGCE

Quem não sonhou em ser um jogador de futebol?: trabalho com projetos para reelaborar foregrounds

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)