Foamed Bitumen: an alternative way of producing asphalt mixtures

With the constant need to improve and make the production of asphalt mixtures more sustainable, new production techniques have been developed, the implementation of which implies the correct knowledge of their performance. One of the most promising asphalt production techniques is the use of foamed bitumen. However, it is essential to understand how this binder will behave when subject to the expansion process. The loss of volume of the foamed bitumen could be translated by a decay curve, which allows to determine the ideal temperature and water content added to the bitumen in order to assure adequate conditions to the mix the bitumen with the aggregates. On the present study, a conventional 160/220 pen grade bitumen was tested by using different temperatures and water contents, and it was concluded that the optimum temperature for the production of foamed bitumen (with the studied bitumen) is 150 ºC, which corresponds to a viscosity of 0.1 Pa.s. The water content mostly influence the half-life of the bitumen foam, resulting in quicker volume reductions for higher water contents.

Producing LFT composite parts for large consumption markets from thermoplastic powder-coated towpregs

Thermoplastic matrix composites are receiving increasing interest in last years. This is due to several advantageous properties and speed of processing of these materials as compared to their thermoset counterparts. Among thermoplastic composites, Long Fibre Thermoplastics (LFTs) have seen the fastest growth, mainly due to developments in the automotive sector. LFTs combine the (semi-)structural material properties of long (>1 cm) fibres, with the ease and speed of thermoplastic processing. This paper reports a study of a novel low-cost LFT technology and resulting composites. A patented powder-coating machine able to produce continuously pre-impregnated materials directly from fibre rovings and polymer powders was used to process glass-fibre reinforced polypropylene (GF/PP) towpregs. Such pre-impregnated materials were then chopped and used to make LFTs in a patented low-cost piston-blender developed by the Centre of Lightweight Structures, TUD-TNO, the Netherlands. The work allowed studying the most relevant towpreg production parameters and establishing the processing window needed to obtain a good quality GF/PP powder coated material. Finally, the processing window that allows producing LFTs of good quality in the piston-blender and the mechanical properties of final stamped GF/PP composite parts were also determined.

Soil mineral N dynamics beneath mixtures of leaves from legume and fruit trees in Central Amazonian multi-strata agroforests

Long term applications of leguminous green mulch could increase mineralizable nitrogen (N) beneath cupuaçu trees produced on the infertile acidic Ultisols and Oxisols of the Amazon Basin. However, low quality standing cupuaçu litter could interfere with green mulch N release and soil N mineralization. This study compared mineral N, total N, and microbial biomass N beneath cupuaçu trees grown in two different agroforestry systems, north of Manaus, Brazil, following seven years of different green mulch application rates. To test for net interactions between green mulch and cupuaçu litter, dried gliricidia and inga leaves were mixed with senescent cupuaçu leaves, surface applied to an Oxisol soil, and incubated in a greenhouse for 162 days. Leaf decomposition, N release and soil N mineralization were periodically measured in the mixed species litter treatments and compared to single species applications. The effect of legume biomass and cupuaçu litter on soil mineral N was additive implying that recommendations for green mulch applications to cupuaçu trees can be based on N dynamics of individual green mulch species. Results demonstrated that residue quality, not quantity, was the dominant factor affecting the rate of N release from leaves and soil N mineralization in a controlled environment. In the field, complex N cycling and other factors, including soil fauna, roots, and microclimatic effects, had a stronger influence on available soil N than residue quality.

Analysis of physicochemical interaction between the components of asphalt mixtures with rubber

Tese de Doutoramento em Engenharia Civil

Preparative chromatographic separation of ternary mixtures : analysis of fractionation times and novel concepts

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2010

Electrochemical high temperature membrane reactor for the processing of hydrogen-carbon monoxide gas mixtures

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2013

Electrochemical oxidation of H 2, CO gas mixtures in polymer-electrolyte-membrane fuel cells

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2014

Rosickyite (monoclinic gamma-sulphur) from La Presta Asphalt Mine, Neuchatel, Switzerland: new X-ray powder diffraction data

Rosickyite, the natural monoclinic gamma -form of sulphur, exists in only a few localities around the globe. In the old asphalt mine at La Presta, Neuchatel. Switzerland, rosickyite occurs locally as small, but very well formed crystals suitable for crystallographic studies. It grows as an alteration product of pyrite-rich asphalt. Rosickyite from La Presta mine is pure molecular sulphur, as revealed by gas chromatography-mass spectrometry. The X-ray powder diffraction data of La Presta rosickyite does not match the one previously published for this species. Therefore, a single crystal study was undertaken and a new indexed X-ray powder diffraction diagram for natural rosickyite is proposed.

DIP-STR: A new marker for resolving unbalanced DNA mixtures

The genetic characterization of unbalanced mixed stains remains an important area where improvementis imperative. Most cases of aggression, homicide and sexual assault produce biological traces withrelatively large amount of the victim's DNA and small amount of the aggressor's DNA. If this ratio issmaller than 1:10 it is currently not possible to obtain a conventional autosomal DNA profile of the minorcontributor, with potential loss of crucial DNA evidence. Y-STR analysis represents a solution for somecases but has several limitations. We propose here a method based on a new compound genetic markerformed by a Deletion/Insertion Polymorphism (DIP) linked to a Short Tandem Repeat polymorphism(STR), that we name DIP-STR. By means of allele-specific amplifications of DIP-STR haplotypes, we canproduce a high resolution autosomal DNA profile of a donor that contributes less than 0.1% to a DNAmixture. Based on these features DIP-STR markers may outperform conventional Y-STR markers inmixed stain analysis.

Strategies of use of a specific immunoglobulin-rich egg yolk powder in weaning piglets

Two experiments were performed to determine the best strategy of use of the product TRACTcare® 4P (ITPSA) (TC, specific immunoglobulin-rich egg yolk powder within an energetic fatty acid matrix) in piglets from weaning and for 6 weeks, in diets without or with inclusion of antibiotics. Each trial was performed with 144 piglets in 24 pens, in a completely randomized design blocked by initial body weight. Feeds were formulated according to animal requirements in two periods. In the first trial no antibiotics were included in the feeds and no room disinfection from previous trial was performed; treatments were: 1) Negative control (NC); 2) NC+TC on top of the feed within the hopper for the first 3 days on trial (30 g/pig×day), and eventually if diarrhea appeared (TCOT); 3) NC+TC ad libitum provided in an extra hopper within the pen (TCAL); and 4) NC+TC at 5 g/kg added to the feed in the mixer (TC5). In the second trial, treatments were: 1) Positive control: basal diet that included 250 mg/kg amoxiciline (BD)+100 mg/kg colistine (AC); 2) BD+2 g/kg TC (TC2A); 3) BD+5 g/kg TC (TC5A); and 4) BD+8 g/kg TC (TC8A). In diets without antibiotics, the product TC at 5 g/kg in the feed numerically improved BW by 8% compared to Control animals, while G:F was almost identical between both groups. When antibiotics were used in the feed, replacement of colistin at 100 mg/kg for TC at 2 g/kg in feed numerically improved the performance compared to Positive control animals (for the whole trial period ADG 8% better: 390 g vs. 361 g; G:F 1% better: 0.748 kg/kg vs. 0.742 kg/kg), possibly due to the stimulation of feed consumption at weaning. In both trials, the lower number of dead and culled animals from TC5 and TC2A together with higher BW represented an advantage over Control treatments of 6% to 10% animals more and 15% to 17% total BW more at the end of the trial.

DIP-STR: Highly Sensitive Markers for the Analysis of Unbalanced Genomic Mixtures.

Samples containing highly unbalanced DNA mixtures from two individuals commonly occur both in forensic mixed stains and in peripheral blood DNA microchimerism induced by pregnancy or following organ transplant. Because of PCR amplification bias, the genetic identification of a DNA that contributes trace amounts to a mixed sample represents a tremendous challenge. This means that standard genetic markers, namely microsatellites, also referred as short tandem repeats (STR), and single-nucleotide polymorphism (SNP) have limited power in addressing common questions of forensic and medical genetics. To address this issue, we developed a molecular marker, named DIP-STR that relies on pairing deletion-insertion polymorphisms (DIP) with STR. This novel analytical approach allows for the unambiguous genotyping of a minor component in the presence of a major component, where DIP-STR genotypes of the minor were successfully procured at ratios up to 1:1,000. The compound nature of this marker generates a high level of polymorphism that is suitable for identity testing. Here, we demonstrate the power of the DIP-STR approach on an initial set of nine markers surveyed in a Swiss population. Finally, we discuss the limitations and potential applications of our new system including preliminary tests on clinical samples and estimates of their performance on simulated DNA mixtures.