Relation between part position and kinematic freedom: An expository survey

This paper makes explicit the relation between relative part position and kinematic freedom of the parts which is implicitly available in the literature. An extensive set of representative papers in the areas of assembly and kinematic modelling is reviewed to specifically identify how the ideas in the two areas are related and influencing the development of each other. The papers are categorised by the approaches followed in the specification, representation, and solution of the part relations. It is observed that the extent of the part geometry is not respected in modelling schemes and as a result, the causal flow of events (proximity–contact–mobility) during the assembling process is not realised in the existing modelling paradigms, which are focusing on either the relative positioning problem or the relative motion problem. Though an assembly is a static description of part configuration, achievement of this configuration requires availability of relative motion for bringing parts together during the assembly process. On the other hand, the kinematic freedom of a part depends on the nature of contacting regions with other parts in its static configuration. These two problems are thus related through the contact geometry. The chronology of the approaches that significantly contributed to the development of the subject is also included in the paper.

Synthesis of plane linkages to generate functions of two variables using point-position reduction—Part 1. Rotary inputs and output

The paper presents simple graphical procedures for position synthesis of plane linkage mechanisms to generate functions of two independent variables. The procedures are based on point-position reduction and permit synthesis of the linkage to satisfy up to six arbitrarily selected precision positions.

Synthesis of plane linkages to generate functions of two variables using point position reduction—II. Sliding inputs and outputs

The paper presents simple graphical procedures for the position synthesis of plane linkage mechanisms with sliding inputs and output to generate functions of two independent variables. The procedures are based on point position reduction and permit synthesis of the linkage to satisfy up to five arbitrarily selected precision positions.

Position-sensitive silicon strip detector characterization using particle beams

Silicon strip detectors are fast, cost-effective and have an excellent spatial resolution. They are widely used in many high-energy physics experiments. Modern high energy physics experiments impose harsh operation conditions on the detectors, e.g., of LHC experiments. The high radiation doses cause the detectors to eventually fail as a result of excessive radiation damage. This has led to a need to study radiation tolerance using various techniques. At the same time, a need to operate sensors approaching the end their lifetimes has arisen. The goal of this work is to demonstrate that novel detectors can survive the environment that is foreseen for future high-energy physics experiments. To reach this goal, measurement apparatuses are built. The devices are then used to measure the properties of irradiated detectors. The measurement data are analyzed, and conclusions are drawn. Three measurement apparatuses built as a part of this work are described: two telescopes measuring the tracks of the beam of a particle accelerator and one telescope measuring the tracks of cosmic particles. The telescopes comprise layers of reference detectors providing the reference track, slots for the devices under test, the supporting mechanics, electronics, software, and the trigger system. All three devices work. The differences between these devices are discussed. The reconstruction of the reference tracks and analysis of the device under test are presented. Traditionally, silicon detectors have produced a very clear response to the particles being measured. In the case of detectors nearing the end of their lifefimes, this is no longer true. A new method benefitting from the reference tracks to form clusters is presented. The method provides less biased results compared to the traditional analysis, especially when studying the response of heavily irradiated detectors. Means to avoid false results in demonstrating the particle-finding capabilities of a detector are also discussed. The devices and analysis methods are primarily used to study strip detectors made of Magnetic Czochralski silicon. The detectors studied were irradiated to various fluences prior to measurement. The results show that Magnetic Czochralski silicon has a good radiation tolerance and is suitable for future high-energy physics experiments.

Position and Feed-Rate Control for Contouring Numerical-Control Systems

Numerical control (NC) for contouring operations requires precise control of position and feed rate for approximating the contour by linear moves of the cutter. A control scheme, for generating linear moves with desired slopes for the cutter, is described. This scheme provides for nine successive linear moves, and may be either expanded or implemented in succession, for approximating a contour.

An Examination of How Entrepreneurs Can Improve Their Position in Relation to Investors

Previous research has been inconclusive regarding the impact of those who invest in entrepreneurs. Consider for a moment how potentially important they are to entrepreneurs. They for example decide who deserves funding, how much time they contribute to their portfolio firms, how they grant entrepreneurs access to their networks, and help entrepreneurs acquire additional funding. In sum, investors potentially have a great impact on the success of entrepreneurs. It is therefore important that we better understand the environment, relationships and context in which parties operate. This thesis contains five articles that explore investors’ and entrepreneurs’ relationships from various viewpoints, in theoretical frameworks, and use a variety of data and research methods. The first article is a literature review that summarises what we know of venture capital, business angel and corporate venture capital funding. The second article studies the entrepreneurs’ investor selection process, its consequences, and identifies key factors that influence the process. Earlier, the common approach has been to concentrate research on the investors’ selection policy, not the entrepreneurs’. The data and conclusions are based on multiple case studies. The article analyses how entrepreneurs can ensure that they get the best possible investor, when it is possible for an entrepreneur to select an investor, and what are the consequences of investor selection. The third article employs power constructs (dependency, power balance/imbalance, power sources) and analyses their applicability in the investor-entrepreneur relationship. Power constructs are extensively studied and utilised in the management and organisation literature. In entrepreneur investor relationships, power aspects are rarely analysed. However, having the ability to “get others to do things they would not otherwise do” is a very common factor in the investor-entrepreneur relationship. Therefore, employing and analysing the applicability of power constructs in this setting is well founded. The article is based on a single case study but suggests that power constructs could be applicable and consequently provide additional insights into the investor-entrepreneur relationship. The fourth article studies the role of advisors in the venture capital investment process and analyses implications for research and practice, particularly from the entrepreneurs’ perspective. The common entrepreneurial finance literature describes the entrepreneur-investor relationship as linear and bilateral. However, it was discovered that advisors may influence the relationship. In this article, the role of advisors, operating procedures and advisors’ impact on different parties is analysed. The fifth article concentrates on investors’ certification effect. The article measures and demonstrates that venture capital investment is likely to increase the credibility (in terms of media attention) of early stage firms, those that most often need additional credibility. Understanding investor certification can affect how entrepreneurs evaluate investment offers and how investors can make their offers appear more lucrative.

Victims of the White War or Rebellions of the Green Revolution? Bolivian Indigenous Women Prisoners' Position in the "War on Drugs" Explored through a Criminological Gaze

Tässä tutkielmassa tarkastellaan Bolivialaisten naisvankien (alkuperäisväestön) ja globaalin huumesodan ("War on Drugs") välistä yhteyttä. Keskustelu sijoitetaan laajemmin kokan viljelyn politiikkaan ja alkuperäisväestön kulttuuriin. Kokaa viljeleviä köyhiä maalaisia, joista huomattava osa on naisia, on vangittu Boliviassa kiihtyvää tahtia viime vuosikymmeninä. Moni naisista on kokan tuotannossa ja kaupassa mukana, sillä se on monesti ainoa keino taloudelliseen selviämiseen. Yleisesti ottaen naisvangit ja naisrikolliset ovat marginaalinen ilmiö. Kansainvälisesti tarkasteltuna naisvankien suhteellinen osuus koko vankilaväestöstä on noin 5,2 % (keskiarvo). Boliviassa osuus on vaihdellut 6,1 %:n ja 17,1 %:n välillä vuosina 2000-2008. Naisvankien määrä yleisesti ottaen on ollut rajussa kasvussa, suurin syy naisten vangitsemiseen on huumausaineisiin liittyvät rikokset. Näyttää myös siltä että vähemmistöt ja etnisen taustan omaavat henkilöt ovat yliedustettuina vankilaväestössä. Bolivia seuraa tätä kansainvälistä trendiä. Tämä tutkielma on rajattu kysymyksiin Bolivian intiaaniperäisten naisten osuudesta maan huumerikollisuudessa, sekä heidän suhteellisen korkeaa vangitsemisastetta selittäviin yhteiskunnallisiin tekijöihin. Kysymykset sukupuolesta, etnisyydestä ja kokan viljelyn politiikasta ovat keskiössä. Yleisiä kriminologisia teorioita peilataan kriittisesti suhteessa aineistoon ja Bolivian kontekstiin. Huumesodan ja Bolivian ankaran huumelainsäädännön seurauksista keskustellaan kriittisesti, sekä pohditaan köyhän alkuperäisväestön massavangitsemisen tarpeellisuutta. Tutkimuskysymykseni ovat: mitkä tekijät selittävät kohtuullisen korkean intiaaniperäisten naisvankien määrän Boliviassa, ja mikä on heidän asemansa globaalissa huumesodassa? Tutkielmassa on analysoitu kvantitatiivista ja kvalitatiivista aineistoa. Päälähteenä on ollut Bolivian tilastokeskuksen tuottamat rikostilastot. Tutkielman tärkeimpänä löydöksenä voidaan pitää havaintoa, että vastoin tiettyjä olettamuksia, intiaaniperäiset naiset ovat hyvinkin aktiivisia perinteisesti miehisiksi käsitetyillä aloilla kuten rikollisuudessa ja politiikassa. Tutkielmassa osoitetaan myös, että pidätysten määrät ovat moninkertaistuneet muutamassa vuosikymmenessä. Koska kokan viljelyssä on kyse pääasiallisesti taloudellisesta toimeentulosta, tämä tutkielma kysyy, onko hengissä pysyminen rikos?

A canonical formulation of the direct position kinematics problem for a general 6-6 stewart platform

This paper deals with the direct position kinematics problem of a general 6-6 Stewart platform, the complete solution of which is not reported in the literature until now and even establishing the number of possible solutions for the general case has remained an unsolved problem for a long period. Here a canonical formulation of the direct position kinematics problem for a general 6-6 Stewart platform is presented. The kinematic equations are expressed as a system of six quadratic and three linear equations in nine unknowns, which has a maximum of 64 solutions. Thus, it is established that the mechanism, in general, can have up to 64 closures. Further reduction of the system is shown arriving at a set of three quartic equations in three unknowns, the solution of which will yield the assembly configurations of the general Stewart platform with far less computational effort compared to earlier models.

Growth mechanism of phases, Kirkendall voids, marker plane position, and indication of the relative mobilities of the species in the interdiffusion zone

Often, wrong conclusions about the mobilities of species are drawn from the position of the Kirkendall marker plane or voids in the interdiffusion zone. To clarify, I have discussed the growth mechanism of the phases and the position of the marker plane depending on the relative mobilities of the species. The formation of different kinds of voids in the interdiffusion zone is discussed. Further, the microstructure that could be found because of the Kirkendall effect is also explained.

Electrical breakdown of carbon nanotube devices and the predictability of breakdown position

We have investigated electrical transport properties of long (>10 mu m) multiwalled carbon nanotubes (NTs) by dividing individuals into several segments of identical length. Each segment has different resistance because of the random distribution of defect density in an NT and is corroborated by Raman studies. Higher is the resistance, lower is the current required to break the segments indicating that breakdown occurs at the highly resistive segment/site and not necessarily at the middle. This is consistent with the one-dimensional thermal transport model. We have demonstrated the healing of defects by annealing at moderate temperatures or by current annealing. To strengthen our mechanism, we have carried out electrical breakdown of nitrogen doped NTs (NNTs) with diameter variation from one end to the other. It reveals that the electrical breakdown occurs selectively at the narrower diameter region. Overall, we believe that our results will help to predict the breakdown position of both semiconducting and metallic NTs. Copyright 2012 Author(s). This article is distributed under a Creative Commons Attribution 3.0 Unported License. http://dx.doi.org/10.1063/1.4720426]

Position control of DC motors with experience mapping based prediction controller

The paper presents a new controller inspired by the human experience based, voluntary body action control (dubbed motor control) learning mechanism. The controller is called Experience Mapping based Prediction Controller (EMPC). EMPC is designed with auto-learning features without the need for the plant model. The core of the controller is formed around the motor action prediction-control mechanism of humans based on past experiential learning with the ability to adapt to environmental changes intelligently. EMPC is utilized for high precision position control of DC motors. The simulation results are presented to show that accurate position control is achieved using EMPC for step and dynamic demands. The performance of EMPC is compared with conventional PD controller and MRAC based position controller under different system conditions. Position Control using EMPC is practically implemented and the results are presented.

Effect of substituent position on optical properties of boron-dipyrromethane isomers

Three isomeric meso-SiMe3C6H4 substituted BODIPYs have been synthesized and their optical properties studied. The constitutional isomers show similar absorption properties but vastly different emissive properties as a result of their different conformational flexibility. Fluorine-19 NMR study is used to unravel the conformational state of the BODIPY isomers at a molecular level. (C) 2013 Elsevier B. V. All rights reserved.

On the systematic position of some Asian enigmatic genera of Asclepiadoideae (Apocynaceae)

The phylogenetic structure of Asclepiadoideae (Apocynaceae) has been elucidated at the tribal and subtribal levels in the last two decades. However, to date, the systematic positions of seven Asian genera, Cosmostigma, Graphistemma, Holostemma, Pentasachme, Raphistemma, Seshagiria and Treutlera, have not been investigated. In this study, we examine the evolutionary relationships among these seven small enigmatic Asian genera and clarify their positions in Asclepiadoideae, using a combination of plastid sequences of rbcL, rps16, trnL and trnL- F regions. Cosmostigma and Treutlera are resolved as members of the non-Hoya clade of Marsdenieae with strong support (maximum parsimony bootstrap support value BSMP = 96, maximum likelihood bootstrap support value BSML = 98, Bayesian-inferred posterior probability PP = 1.0). Pentasachme is resolved as sister of Stapeliinae to Ceropegieae with moderate support (BSMP = 64, BSML = 66, PP = 0.94). Graphistemma, Holostemma, Raphistemma and Seshagiria are all nested in the Asclepiadeae-Cynanchinae clade (BSMP = 97, BSML = 100, PP = 1.0). The study confirms the generally accepted tribal and subtribal structure of the subfamily. One exception is Eustegia minuta, which is placed here as sister to all Asclepiadeae (BSMP = 58, BSML = 76, PP = 0.99) and not as sister to the Marsdenieae + Ceropegieae clade. The weak support and conflicting position indicate the need for a placement of Eustegia as an independent tribe. In Asclepiadeae, a sister group position of Cynanchinae to the Asclepiadinae + Tylophorinae clade is favoured (BSMP = 84, BSML = 88, PP = 1.0), whereas Schizostephanus is retrieved as unresolved. Oxystelma appears as an early-branching member of Asclepiadinae with weak support (BSMP = 52, BSML = 74, PP = 0.69). Calciphila and Solenostemma are also associated with Asclepiadinae with weak support (BSMP = 37, BSML = 45, PP = 0.79), but all alternative positions are essentially without support. The position of Indian Asclepiadoideae in the family phylogeny is discussed. (c) 2014 The Linnean Society of London, Botanical Journal of the Linnean Society, 2014, 174, 601-619.