The use of supply chain management to reduce delays as result of pre-construction deficiencies in Malaysian public sector construction projects

This thesis examined the delay causes of Malaysian public sector projects. Using a systematic approach, the researcher identified the main delay factors and categorised them into pathogens. The pathogens were matched with beneficial Supply Chain Management (SCM) tools and developed into a holistic SCM framework to facilitate improvements in Malaysian public sector projects. The researcher concluded that SCM is the potential saviour for the delay dilemma and that it is necessary for the Malaysian government to initiate the revolutionary practice.

3,6-Di(furan-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione and bithiophene copolymer with rather disordered chain orientation showing high mobility in organic thin film transistors

Pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione or diketopyrrolopyrrole (DPP) is a useful electron-withdrawing fused aromatic moiety for the preparation of donor-acceptor polymers as active semiconductors for organic electronics. This study uses a DPP-furan-containing building block, 3,6-di(furan-2-yl)pyrrolo[3,4- c]pyrrole-1,4(2H,5H)-dione (DBF), to couple with a 2,2′-bithiophene unit, forming a new donor-acceptor copolymer, PDBFBT. Compared to its structural analogue, 3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione (DBT), DBF is found to cause blue shifts of the absorption spectra both in solution and in thin films and a slight reduction of the highest occupied molecular orbital (HOMO) energy level of the resulting PDBFBT. Despite the fact that its thin films are less crystalline and have a rather disordered chain orientation in the crystalline domains, PDBFBT shows very high hole mobility up to 1.54 cm 2 V-1 s-1 in bottom-gate, top-contact organic thin film transistors.

Assessment on the effect of pollution abatement on environmental efficiency with Markov chain Monte Carlo simulation

Both environmental economists and policy makers have shown a great deal of interest in the effect of pollution abatement on environmental efficiency. In line with the modern resources available, however, no contribution is brought to the environmental economics field with the Markov chain Monte Carlo (MCMC) application, which enables simulation from a distribution of a Markov chain and simulating from the chain until it approaches equilibrium. The probability density functions gained prominence with the advantages over classical statistical methods in its simultaneous inference and incorporation of any prior information on all model parameters. This paper concentrated on this point with the application of MCMC to the database of China, the largest developing country with rapid economic growth and serious environmental pollution in recent years. The variables cover the economic output and pollution abatement cost from the year 1992 to 2003. We test the causal direction between pollution abatement cost and environmental efficiency with MCMC simulation. We found that the pollution abatement cost causes an increase in environmental efficiency through the algorithm application, which makes it conceivable that the environmental policy makers should make more substantial measures to reduce pollution in the near future.

Introduction : Call Centres, the Networked Economy and the Value Chain

In July 2006, members of Monash University’s Australian Centre for Research in Employment and Work (ACREW) joined with colleagues from King’s College London to hold a conference focused on ‘Socially responsive, socially responsible approaches to employment and work’ (DeCieri et al., 2006). One of the five conference streams was devoted to work and employment in call centres and was organized by the lead author of this introduction (Rainnie). This special edition of the JIR includes a number of articles from that stream.

Rapid analysis of GSTM1, GSTT1 and GSTP1 polymorphisms using real-time polymerase chain reaction

Polymorphisms of glutathione transferases (GST) are important genetic determinants of susceptibility to environmental carcinogens (Rebbeck, 1997). The GSTs are a multigene family of dimeric enzymes involved in detoxification, and, in a few cases, the bioactivation of a variety of xenobiotics (Hayes et al., 1995). The cytosolic GST enzyme family consists of four major classes of enzymes, referred to as alpha, mu, pi and theta. Several members of this family (for example, GSTM1, GSTT1 and GSTP1) are polymorphic in human populations (Wormhoudt et al., 1999). Molecular epidemiology studies have examined the role of GST polymorphisms as susceptibility factors for environmentally and/or occupationally induced cancers (Wormhoudt et al., 1999). In particular, case-control studies showed a relationship between the GSTM1 null genotype and the development of cancer in association with smoking habits, which has been shown for cancers of the respiratory and gastrointestinal tracts as well as other cancer types (Miller et al., 1997). Only a few molecular epidemiological studies addressed the role of GSTT1 and GSTP1 polymorphisms in cancer susceptibility. Since GSTP1 is a key player in biotransformation/bioactivation of benzo(a)pyrene, GSTP1 may be even more important than GSTM1 in the prevention of tobacco-induced cancers (Harries et al., 1997; Harris et al., 1998). To date, this relationship has not been sufficiently addressed in humans. Comprehensive molecular epidemiological studies may add to the current knowledge of the role of GST polymorphisms in cancer susceptibility and extent of the knowledge gained from approaches that used phenotyping, such as GSTM1 activity as it relates to trans-stilbene oxide, or polymerase chain reaction (PCR) based genotyping of polymorphic isoenzymes (Bell et al., 1993; Pemble et al., 1994; Harries et al., 1997).

Supply chain regulation to protect the occupational health and safety of vulnerable workers

The last two decades have witnessed a fragmentation of previously integrated systems of production and service delivery with the advent of boundary-less, networked and porous organisational forms. This trend has been associated with the growth of outsourcing and increased use of contingent workers. One consequence of these changes is the development of production/service delivery systems based on complex national and international networks of multi-tiered subcontracting increasingly labelled as supply chains. A growing body of research indicates that subcontracting and contingent work arrangements affect design and decision-making processes in ways that can seriously undermine occupational health and safety (OHS). Elaborate supply chains also present a regulatory challenge because legal responsibility for OHS is diffused amongst a wider array of parties, targeting key decision-makers is more difficult, and government agencies encounter greater logistical difficulties trying to safeguard contingent workers. In a number of industries these problems have prompted new forms of regulatory intervention, including mechanisms for sheeting legal responsibility to the top of supply chains, contractual tracking devices and increasing industry, union and community involvement in enforcement. After describing the problems just alluded to this paper examines recent efforts to regulate supply chains to safeguard OHS in the United Kingdom and Australia.

Discover Hong Kong restaurants and sights during a stay at Hotel ICON

DID you ever land at the old one?” our hostess asks. She sits across from me in the exit row, leaning a little forward to catch the view. Yes, I tell her, when I was a kid. I remember my mum worrying about it...

Strategic supply chain management factors influencing agribusiness innovation utilization

Purpose – The purpose of this paper is to examine empirically, an industry development paradox, using embryonic literature in the area of strategic supply chain management, together with innovation management literature. This study seeks to understand how, forming strategic supply chain relationships, and developing strategic supply chain capability, influences beneficial supply chain outcomes expected from utilizing industry-led innovation, in the form of electronic business solutions using the internet, in the Australian beef industry. Findings should add valuable insights to both academics and practitioners in the fields of supply chain innovation management and strategic supply chain management, and expand knowledge to current literature. Design/methodology/approach – This is a quantitative study comparing innovative and non-innovative supply chain operatives in the Australian beef industry, through factor analysis and structural equation modeling using PAWS Statistical V18 and AMOS V18 to analyze survey data from 412 respondents from the Australian beef supply chain. Findings – Key findings are that both innovative and non-innovative supply chain operators attribute supply chain synchronization as only a minor indicator of strategic supply chain capability, contrary to the literature; and they also indicate strategic supply chain capability has a minor influence in achieving beneficial outcomes from utilizing industry-led innovation. These results suggest a lack of coordination between supply chain operatives in the industry. They also suggest a lack of understanding of the benefits of developing a strategic supply chain management competence, particularly in relation to innovation agendas, and provides valuable insights as to why an industry paradox exists in terms of the level of investment in industry-led innovation, vs the level of corresponding benefit achieved. Research limitations/implications – Results are not generalized due to the single agribusiness industry studied and the single research method employed. However, this provides opportunity for further agribusiness studies in this area and also studies using alternate methods, such as qualitative, in-depth analysis of these factors and their relationships, which may confirm results or produce different results. Further, this study empirically extends existing theoretical contributions and insights into the roles of strategic supply chain management and innovation management in improving supply chain and ultimately industry performance while providing practical insights to supply chain practitioners in this and other similar agribusiness industries. Practical implications – These findings confirm results from a 2007 research (Ketchen et al., 2007) which suggests supply chain practice and teachings need to take a strategic direction in the twenty-first century. To date, competence in supply chain management has built up from functional and process orientations rather than from a strategic perspective. This study confirms that there is a need for more generalists that can integrate with various disciplines, particularly those who can understand and implement strategic supply chain management. Social implications – Possible social implications accrue through the development of responsible government policy in terms of industry supply chains. Strategic supply chain management and supply chain innovation management have impacts to the social fabric of nations through the sustainability of their industries, especially agribusiness industries which deal with food safety and security. If supply chains are now the competitive weapon of nations then funding innovation and managing their supply chain competitiveness in global markets requires a strategic approach from everyone, not just the industry participants. Originality/value – This is original empirical research, seeking to add value to embryonic and important developing literature concerned with adopting a strategic approach to supply chain management. It also seeks to add to existing literature in the area of innovation management, particularly through greater understanding of the implications of nations developing industry-wide, industry-led innovation agendas, and their ramifications to industry supply chains.

Characterization of acyl chain position in unsaturated phosphatidylcholines using differential mobility-mass spectrometry

Glycerophospholipids (GPs) that differ in the relative position of the two fatty acyl chains on the glycerol backbone (i.e., sn-positional isomers) can have distinct physicochemical properties. The unambiguous assignment of acyl chain position to an individual GP represents a significant analytical challenge. Here we describe a workflow where phosphatidylcholines (PCs) are subjected to ESI for characterization by a combination of differential mobility spectrometry and MS (DMS-MS). When infused as a mixture, ions formed from silver adduction of each phospholipid isomer {e.g., [PC (16:0/18:1) + Ag]+ and [PC (18:1/16:0) + Ag]+} are transmitted through the DMS device at discrete compensation voltages. Varying their relative amounts allows facile and unambiguous assignment of the sn-positions of the fatty acyl chains for each isomer. Integration of the well-resolved ion populations provides a rapid method (< 3 min) for relative quantification of these lipid isomers. The DMS-MS results show excellent agreement with established, but time-consuming, enzymatic approaches and also provide superior accuracy to methods that rely on MS alone. The advantages of this DMS-MS method in identification and quantification of GP isomer populations is demonstrated by direct analysis of complex biological extracts without any prior fractionation.

The chain reaction

Synopsis and review of the Australian feature film The Chain Reaction, directed by Ian Barry.

Design democratisation and its understandings through the meaning of the word “design” in Portuguese colonised countries

This paper explores the literature and analyses the different uses and understandings of the word “design” in Portuguese colonised countries, using Brazil as the main example. It investigates the relationship between the linguistic existence of terms to define and describe “design” as an activity and field, and the roles and perceptions of Design by the general society. It also addresses the effects that the lack of a proper translation causes on the local community from a cultural point of view. The current perception of Design in Portuguese colonies is associated to two main aspects: linguistic and historical. Both of them differentiate the countries taken into consideration from other countries that have a different background. The changes associated to the meaning of “design” throughout the years, caused a great impact on the perceptions that people have about Design. On the other hand, the development of Design has also influenced the changes on the meaning of the term, as a result of the legacy from the colonisation period and also as a characteristic of the Portuguese language. Design has developed and reached a level of excellence in Portuguese colonised countries that competes with the most traditional Design cultures in the world. However, this level of Design is enmeshed into an elite belonging to universities and specialised markets, therefore Design is not democratised. The ultimate aim of this study is to promote discussions on how to make the discourse surrounding this area more accessible to people from non-English speaking countries that do not have the word “design” in their local language.

The Wzy O-antigen polymerase of Yersinia pseudotuberculosis O:2a has a dependence on the Wzz chain-length determinant for efficient polymerization

Lipopolysaccharide is a major immunogenic structure for the pathogen Yersinia pseudotuberculosis, which contains the O-specific polysaccharide (OPS) that is presented on the cell surface. The OPS contains many repeats of the oligosaccharide O-unit and exhibits a preferred modal chain length that has been shown to be crucial for cell protection in Yersinia. It is well established that the Wzz protein determines the preferred chain length of the OPS, and in its absence, the polymerization of O units by the Wzy polymerase is uncontrolled. However, for Y. pseudotuberculosis, a wzz mutation has never been described. In this study, we examine the effect of Wzz loss in Y. pseudotuberculosis serotype O:2a and compare the lipopolysaccharide chain-length profile to that of Escherichia coli serotype O111. In the absence of Wzz, the lipopolysaccharides of the two species showed significant differences in Wzy polymerization. Yersinia pseudotuberculosis O:2a exhibited only OPS with very short chain lengths, which is atypical of wzz-mutant phenotypes that have been observed for other species. We hypothesise that the Wzy polymerase of Y. pseudotuberculosis O:2a has a unique default activity in the absence of the Wzz, revealing the requirement of Wzz to drive O-unit polymerization to greater lengths.