Raft miniemulsion (co)polymerization of methyl methacrylate and n-butyl acrylate

This thesis work is part of a larger synthesis project about alkyd resins from natural sources, copolymerized with methyl acrylate and n-butyl acrylates, which wil be used for coatings purpose. The aim is to control the copolymerization of methyl acrylate and n-butyl acrylate in RAFT miniemulsion. The research was divided into three parts. First the homopolymerization of methyl methacrylate and n-butyl acrylate was studied by varying different parameters such as the amount of surfactant, the amount of initiator, pH, and especially the RAFT agent. Then two macro RAFT agents were synthesized, as suggested by the existing literature. Finally, the two monomers were copolymerized using both the RAFT used for the homopolymerization and those synthesized in the second stage. To verify the obtained control over the polymerization, the synthesized polymers were analyzed by gel permeation chromatography, GPC, thus finding their molecular weight and its polydispersity.

Scale Up of PLA Nanoparticle Synthesis by Solvent Displacement and Functionalization of the Particles with a Silica Shell for Targeted Drug Delivery Applications

Biodegradable polymer nanoparticles have the properties necessary to address many of the issues associated with current drug delivery techniques including targeted and controlled delivery. A novel drug delivery vehicle is proposed consisting of a poly(lactic acid) nanoparticle core, with a functionalized, mesoporous silica shell. In this study, the production of PLA nanoparticles is investigated using solvent displacement in both a batch and continuous manner, and the effects of various system parameters are examined. Using Pluronic F-127 as the stabilization agent throughout the study, PLA nanoparticles are produced through solvent displacement with diameters ranging from 200 to 250 nm using two different methods: dropwise addition and in an impinging jet mixer. The impinging jet mixer allows for easy scale-up of particle production. The concentration of surfactant and volume of quench solution is found to have minimal impact on particle diameter; however, the concentration of PLA is found to significantly impact the diameter mean and polydispersity. In addition, the stability of the PLA nanoparticles is observed to increase as residual THF is evaporated. Lastly, the isolated PLA nanoparticles are coated with a silica shell using the Stöber Process. It is found that functionalizing the silica with a phosphonic silane in the presence of excess Pluronic F-127 decreases coalescence of the particles during the coating process. Future work should be conducted to fine-tune the PLA nanoparticle synthesis process by understanding the effect of other system parameters and in synthesizing mesoporous silica shells.

Hydrodynamic Characterization of Bile Salt Host-Guest Complexes by Pulsed Field Gradient NMR Spectroscopy

The work described herein is aimed at understanding primary and secondary aggregation of bile salt micelles and how micelles can perform chiral recognition of binapthyl analytes. Previous work with cholate and deoxycholate using micellar electrokinetic chromatography (MEKC) and nuclear magnetic resonance (NMR) has provided insightinto cholate and deoxycholate micelle formation, especially with respect to the critical micelle concentration (CMC). Chiral separations of the model analyte, 1,1â??-binaphthyl-2,2â??-diyl hydrogen phosphate (BNDHP), via cholate (C) and deoxycholate (DC) mediated MEKC separataions previously have shown the DC CMC to be 7-10 mM andthe cholate CMC at 14 mM at ph 12. A second model analyte,1,1â??-binaphthol (BN), was also previously investigated to probe micellar structure, but the MEKC data for this analyte implied a higher CMC, which may be interpreted as secondary aggregation. Thiswork extends the investigation of bile salts to include pulsed field gradient spin echo (PFGSE) NMR experiments being used to gain information about the size and degree of polydispersity of cholate and deoxycholate micelles. Concentrations of cholate below 10mM show a large variation in effective radius likely due to the existence of transient preliminary aggregates. The onset of the primary micelle shows a dramatic increase in effective radius of the micelle in cholate and deoxycholate. In the region of expectedsecondary aggregation a gradual increase of effective radius was observed with cholate; deoxycholate showed a persistent aggregate size in the secondary micelle region that is modulated by the presence of an analyte molecule. Effective radii of cholate anddeoxycholate (individually) were compared with and without R- and S-BNDHP in order to observe the effective radius difference of micelles with and without analyte present. The presence of S-BNDHP consistently resulted in a larger effective aggregate radius incholate and deoxycholate, confirming previous data of the S-BNDHP interacting more with the micelle than R-BNDHP. In total, various NMR techniques, like diffusion NMR can be used to gain a greater understanding of the bile salt micellization process and chiral resolution.

Nanopartículas lipídicas sólidas e vesículas cataniônicas contendo ftalocianina de cloro alumínio aplicadas nos processos fotodinâmicos

O trabalho apresentado foi realizado em duas etapas independentes e baseou-se no estudo de diferentes sistemas nanométricos para viabilizar a aplicação da ftalocianina de cloro alumínio (ClAlPc) na terapia fotodinâmica (TFD) para o tratamento do câncer de pele do tipo melanoma. O fármaco fotossensibilizante (FS) utilizado apresenta propriedades físico-químicas que lhe permitem exercer sua atividade fotodinâmica com excelência, sem a interferência do cromóforo endógeno melanina existente nas células melanocíticas. Para driblar sua elevada hidrofobicidade, ClAlPc foi encapsulada em sistemas nanométricos para administração em meio fisiológico. Inicialmente nanopartículas lipídicas sólidas (NLS) foram desenvolvidas por emulsificação direta, após um estudo de elaboração do diagrama de fases. O compritol foi o lipídio sólido escolhido para compor as NLS, com diferentes concentrações de ClAlPc. Todas as formulações desenvolvidas foram devidamente caracterizadas, com tamanho médio entre 100 e 200 nm, baixa polidispersão, potencial zeta adequadamente negativo (~|30| mV), drug loading de ClAlPc entre 76-94% (com pequena redução após 24 meses) e alta eficiência de encapsulação (E.E.). A morfologia arredondada das nanopartículas foi confirmada por microscopia eletrônica de transmissão e de força atômica. A estabilidade das NLS foi de 24 meses. A avaliação da cristalinidade do lipídio revelou a integração da ClAlPc à matriz lipídica da NLS, presença de estruturas polimórficas e grau de cristalinidade adequado, sem alterações após 24 meses. Nos estudos de difusão in vitro, observou-se que ftalocianina encapsulada nas NLS acumulam-se preferencialmente na epiderme e derme do que no estrato córneo, sem traços de permeação do ativo. Foi confirmado o caráter biocompatível das NLS sobre fibroblastos NIH-3T3. A ftalocianina encapsulada nas NLS não foi tóxica na linhagem de melanoma B16-F10 na ausência de luz, porém, apresentou excelente efeito fototóxico (0,75 ?g mL-1 de ClAlPc nanoencapsulada e irradiação entre 0,5 e 2,0 J cm-2), com redução da viabilidade celular de 87%. O segundo sistema de veiculação estudado foram as vesículas cataniônicas (VesCat), que se formam espontaneamente em água com o tensoativo TriCat 12. A obtenção das vesículas contendo ClAlPc envolve uma etapa adicional, para remoção de solvente orgânico, que foi aprimorada, reduzindo o tempo de produção em 55%. As VesCat/ClAlPc obtidas mantiveram suas propriedades físico-químicas e morfologia arredondada (confirmada por microscopia eletrônica de varredura), drug loading de 47% e alta E.E. Os resultados comprovaram que a aplicação desses dois sistemas nanométricos é altamente eficiente para aplicação da TFD no tratamento do câncer de pele do tipo melanoma ou outras doenças cutâneas, apresentando características favoráveis para avanços nos estudos de fase clínica e pré-clínica.

Separation and fractionation of order and disorder in highly polydisperse systems

We study a polydisperse soft-spheres model for colloids by means of microcanonical Monte Carlo simulations. We consider a polydispersity as high as 24%. Although solidification occurs, neither a crystal nor an amorphous state are thermodynamically stable. A finite size scaling analysis reveals that in the thermodynamic limit: a the fluid-solid transition is rather a crystal-amorphous phase-separation, b such phase-separation is preceded by the dynamic glass transition, and c small and big particles arrange themselves in the two phases according to a complex pattern not predicted by any fractionation scenario.

Caracterização de nanopartículas pDNA-protamina e pDNA-protamina-lipossoma e avaliação da eficiência de entrega gênica a células de mamífero.

Em estudos de terapia gênica e vacinação por DNA, a eficiência e a segurança dos vetores que transportam o material genético terapêutico possuem papel fundamental. Vetores não virais são considerados mais seguros, mas menos eficientes em relação aos vetores virais. Em parte, isso se deve à falta de estudos sistemáticos e comparativos no que diz respeito às características físico-químicas desses vetores quando em soluções biológicas e o efeito delas sobre a eficiência de entrega gênica. O objetivo deste trabalho é avaliar o efeito do pH, da força iônica e do tipo tampão de complexação sobre as características físico-químicas de nanopartículas pDNA-protamina e pDNA-protamina-lipofectamina, visando à entrega gênica para diferentes linhagens celulares. Para isso, nanopartículas formadas em diferentes condições foram caracterizadas através de ensaios de espalhamento dinâmico de luz (DLS) e potencial zeta. Os estudos indicaram que o pH, a força iônica, o tipo de tampão e a presença de meio de cultura e soro no ambiente de complexação alteram significativamente o tamanho, a polidispersidade e o potencial zeta das partículas formadas. Finalmente, buscou-se avaliar o efeito dessas características sobre a eficiência de transfecção in vitro de células de macrófagos IC21 e células HeLa. Os estudos de transfecção em células Hela indicam que tanto a composição como as condições de formação das partículas influenciam significativamente a eficiência de transfecção.

Preparação, caracterização e propriedades de lipossomas contendo o ácido -ciano-4-hidroxicinâmico e o agente fotossenbilizador AICIPc: um novo sistema carreador específico com ação sinérgica aplicado a terapia fotodinâmica

Ftalocianina de alumínio-cloro (AlClPc) é um fotossensibilizador de segunda geração em terapia fotodinâmica (TFD) caracterizado por seu caráter anfifílico e tendência de auto-agregação em meio aquoso, o que prejudica seu potencial de aplicação. O aCHC é um substrato de transportadores de monocarboxilato (MCT) superexpresso em células de MCF-7. Objetivando a solubilização da AlClPc e aumento de internalização em tecidos neoplásicos nos propomos aqui o uso de DSPC e DOPC em diferentes proporções para formar vesículas lipidicas mistas (LV) na presença de aCHC como sistemas veiculadores de fármaco. Lv foi preparado pelo método de injeção etanólica e formou vesículas de dimensões nanométricas (aproximadamente 100 nm) com bom índice de polidispersão, valores negativos de potencial zeta e estáveis em meio aquoso por mais de 50 dias. AlClPc se complexou com o fosfato das LV o que conferiu uma localização interfacial às moléculas de AlClPc como demonstrado pelos resultados de supressão de fluorescência. Medidas de anisotropia, fluorescência estática e resolvida no tempo corroboram com estes resultados e demonstram que a auto-agregação da AlClPc ocorre mesmo em lipossomas. Entretanto, a veiculação da AlClPc por LV em carcinoma de células escamosas oral (OSCC) levou a um processo de desagregação demonstrado por (FLIM). Este incrível comportamento é novo e aumenta o conhecimento científico sobre o mecanismo intracelular de ação de fotossensibilizadores em TFD. Em TFD, ambos os sistemas LVIII+AlClPc e LVIII+AlClPc+aCHC não apresentaram toxicidade no escuro no período de incubação de 3 h com as concentrações de lipídios, AlClPc e aCHC iguais a 0,15 mmol/L, 0,5 umol/L e 10,0 umol/L, respectivamente. De maneira inesperada, o sistema LVIII+AlClPc foi mais eficiente em TFD que o sistema LVIII+AlClPc+aCHC, devido ao caráter antioxidante do aCHC. Estes resultados abrem uma nova perspectiva do potencial uso de LV-AlClPc para o tratamento fotodinâmico.

Polimerização em emulsão de estireno em microrreator.

A polimerização em emulsão de estireno em um microrreator Syrris de 250 µL com misturador estático junção \"T\" foi estudada em duas etapas. Primeiro somente a fluidodinâmica deste dispositivo não convencional foi avaliada, depois, foi desenvolvida a reação de polimerização de forma a observar como este fator influencia no sistema. Os experimentos foram realizados procurando se atingir maiores conversões, mas mantendo a estabilidade da emulsão. Foi um trabalho exploratório, portanto se assemelha mais a um processo de evolução (evolutionary process). Foram verificados a partir de qual relação das vazões dos dois fluidos ocorre a formação de gotas, e que com o aumento da vazão da fase contínua, aquosa (Qc), mantendo constante a vazão da fase dispersa (Qd), foi verificado uma diminuição do diâmetro das gotas e um regime de fluxo laminar. Posteriormente, realizou-se a polimerização em emulsão do estireno no microrreator, porém com restrições para altas vazões. Os parâmetros de processo testados foram a proporção Qc e Qd, a temperatura e a concentração do iniciador para então verificar o efeito que a variação destas ocasionam na conversão de monômero, no diâmetro e número de partículas e nas massas moleculares médias. A polimerização foi feita para soma das vazões Qc e Qd da ordem de 100 µ L/min, com 15% de monômero na formulação e com o maior tempo de residência possível de 2,5 minutos. Para maiores concentrações de monômero, acima de 15% foi verificado entupimento do canal do microrreator. A taxa de conversão de monômero aumentou com o aumento da temperatura e com o aumento da concentração do iniciador, mas o maior valor atingido foi de apenas 37% devido ao baixo tempo de residência. Nos casos de maiores taxas de conversão, as massas moleculares obtidas foram as menores conforme o esperado pela teoria. Finalmente, os índices de polidispersão (PDI), obtidos foram da ordem de 2,5 a 3,5.

Phase diagram of a polydisperse soft-spheres model for liquids and colloids

The phase diagram of soft spheres with size dispersion is studied by means of an optimized Monte Carlo algorithm which allows us to equilibrate below the kinetic glass transition for all size distributions. The system ubiquitously undergoes a first-order freezing transition. While for a small size dispersion the frozen phase has a crystalline structure, large density inhomogeneities appear in the highly disperse systems. Studying the interplay between the equilibrium phase diagram and the kinetic glass transition, we argue that the experimentally found terminal polydispersity of colloids is a purely kinetic phenomenon.

Long-term in vivo biostability of poly(dimethylsiloxane) / poly(hexamethylene oxide) mixed macrodiol-based polyurethane elastomers

The long-term biostability of a novel thermoplastic polyurethane elastomer (Elast-Eon(TM) 2 80A) synthesized using poly(hexamethylene oxide) (PHMO) and poly(dimethylsiloxane) (PDMS) macrodiols has been studied using an in vivo ovine model. The material's biostability was compared with that of three commercially available control materials, Pellethane(R) 2363-80A, Pellethane(R) 2363-55D and Bionate(R) 55D, after subcutaneous implantation of strained compression moulded flat sheet dumbbells in sheep for periods ranging from 3 to 24 months. Scanning electron microscopy, attenuated total reflectance-Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy were used to assess changes in the surface chemical structure and morphology of the materials. Gel permeation chromatography, differential scanning calorimetry and tensile testing were used to examine changes in bulk characteristics of the materials. The results showed that the biostability of the soft flexible PDMS-based test polyurethane was significantly better than the control material of similar softness, Pellethane(R) 80A, and as good as or better than both of the harder commercially available negative control polyurethanes. Pellethane(R) 55D and Bionate(R) 55D. Changes observed in the surface of the Pellethane(R) materials were consistent with oxidation of the aliphatic polyether soft segment and hydrolysis of the urethane bonds joining hard to soft segment with degradation in Pellethane(R) 80A significantly more severe than that observed in Pellethane(R) 55D. Very minor changes were seen on the surfaces of the Elast-Eon(TM) 2 80A and Bionate(R) 55D materials. There was a general trend of molecular weight decreasing with time across all polymers and the molecular weights of all materials decreased at a similar relative rate. The polydispersity ratio, M-w/M-n, increased with time for all materials. Tensile tests indicated that UTS increased in Elast-Eon(TM) 2 80A and Bionate(R) 55D following implantation under strained conditions. However, ultimate strain decreased and elastic modulus increased in the explanted specimens of all three materials when compared with their unimplanted unstrained counterparts. The results indicate that a soft, flexible PDMS-based polyurethane synthesized using 20% PHMO and 80% PDMS macrodiols has excellent long-term biostability compared with commercially available polyurethanes. (C) 2004 Elsevier Ltd. All rights reserved.

An investigation of the nitroxide-mediated preirradiation grafting of styrene onto PFA

Simultaneous and preirradiation grafting of styrene onto fluorinated polyolefins does not enable control of the molecular weights or polydispersities of the styrene grafts. The nitroxide-mediated grafting of styrene onto PFA with TEMPO and TEISO using a preirradiation method has been investigated as a means of controlling the graft properties and especially to produce grafts with improved suitability for SPOC. The yields of graft were found to be in the range 15-20% for nitroxide concentrations between 5 x 10(-3) and 2 x 10(-2) M and were similar for the two nitroxides studied. Raman mapping was used to obtain the depth profile for the styrene grafts. The grafts were found to be principally located within the PFA substrate, and little graft was formed at the PFA surface. Fmoc loading tests were performed to assess the suitability of the grafted PFA as a support for SPOC, but these showed no significant loading was achieved, thus indicating that the graft properties are not suitable for SPOC. However, the study has important implications for the applications of PFA-grafted polymers in other areas, such as chemically resistant ion-exchange and separation membranes.

Using different structure types of microemulsions for the preparation of poly(alkylcyanoacrylate) nanoparticles by interfacial polymerization

A phase diagram of the pseudoternary system ethyloleate, polyoxyethylene 20 sorbitan mono-oleate/sorbitan monolaurate and water with butanol as a cosurfactant was prepared. Areas containing optically isotropic, low viscosity one-phase systems were identified and systems therein designated as w/o droplet-, bicontinuous- or solution-type microemulsions using conductivity, viscosity, cryo-field emission scanning electron microscopy and self-diffusion NMR. Nanoparticles were prepared by interfacial polymerization of selected w/o droplet, bicontinuous- or solution-type microemulsions with ethyl-2-cyanoacrylate. Morphology of the particles and entrapment of the water-soluble model protein ovalbumin were investigated. Addition of monomer to the different types of microemulsions (w/o droplet, bicontinuous, solution) led to the formation of nanoparticles, which were similar in size (similar to 250 nm), polydispersity index (similar to 0.13), zeta-potential (similar to-17 mV) and morphology. The entrapment of the protein within these particles was up to 95%, depending on the amount of monomer used for polymerization and the type of microemulsion used as a polymerization template. The formation of particles with similar characteristics from templates having different microstructure is surprising, particularly considering that polymerization is expected to occur at the water-oil interface by base-catalysed polymerization. Dynamics within the template (stirring, viscosity) or indeed interfacial phenomena relating to the solid-liquid interface appear to be more important for the determination of nanoparticle morphology and characteristics than the microstructure of the template system. (c) 2005 Elsevier B.V. All rights reserved.

Preparation of poly (alkylcyanoacrylate) nanoparticles by polymerization of water-free microemulsions

Phase diagrams of the pseudoternary systems ethyloleate, polyoxyethylene 20 sorbitan mono-oleate/sorbitan monolaurate and propylene glycol with and without butanol as a co-surfactant were prepared. Areas containing optically isotropic, one-phase systems were identified and samples therein designated as droplet, bicontinuous or solution type microemulsions using conductivity, viscosity and self-diffusion NMR. Nanoparticles were prepared by polymerization of selected microemulsions with ethyl-2-cyanoacrylate and the morphology of the particles was investigated. Addition of monomer to all types of microemulsions led to the formation of nanoparticles, which had an average size of 244 +/- 25 nm, an average polydispersity index of 0.15 +/- 0.04 and a zeta-potential of -17 +/- 3 mV. The formation of particles from water-free microemulsions of different types is surprising, particularly considering that polymerization is expected to occur at a water-oil interface by base-catalysed polymerization. It would appear that propylene glycol is sufficiently nucleophilic to initiate the polymerization. The use of water-free microemulsions as templates for the preparation of poly (alkylcyanoacrylate) nanoparticles opens up interesting opportunities for the encapsulation of bioactives which do not have suitable properties for encapsulation on the basis of water-containing microemulsions.

RAFT-mediated emulsion polymerization of styrene using a non-ionic surfactant

We report the successful RAFT-mediated emulsion polymerization of styrene using a non-ionic surfactant (Brij98), the highly reactive 1-phenylethyl phenyldithioacetate (PEPDTA) RAFT agent, and water-soluble initiator ammonium persulfate (APS). The molar ratio of RAFT agent to APS was identical in all experiments. Most of the monomer was contained within the micelles, analogous to microemulsion or miniemulsion systems but without the need of shear, sonication, cosurfactant, or a hydrophobe. The number-average molecular weight increased with conversion and the polydispersity index was below 1.2. This ideal 'living' behavior was only found when molecular weights of 9000 and below were targeted. It was postulated that the rapid transportation of RAFT agent from the monomer swollen micelles to the growing particles was fast on the polymerization timescale, and most if not all the RAFT agent is consumed within the first 10% conversion. In addition, it was postulated that the high nucleation rate from the high rate of exit ( of the R radical from the RAFT agent) and high entry rate from water-phase radicals ( high APS concentration) reduced the effects of 'superswelling' and therefore a similar molar ratio of RAFT agent to monomer was maintained in all growing particles. The high polydispersity indexes found when targeting molecular weights greater than 9000 were postulated to be due to the lower nucleation rate from the lower weight fractions of both APS and RAFT agent. In these cases, 'superswelling' played a dominant role leading to a heterogeneous distribution of RAFT to monomer ratios among the particles nucleated at different times.

Facile synthesis of well-defined hydrophilic methacrylic macromonomers using ATRP and click chemistry

A range of well-defined hydrophilic methacrylic macromonomers has been synthesized by the judicious combination of atom transfer radical polymerization (ATRP) and copper-catalyzed 1,3-dipolar cycloaddition (azide-alkyne click chemistry). An azido a-functionalized ATRP initiator was used to produce well-defined homopolymers with terminal azide functionality via ATRP in protic media at 20 °C, with generally good control being achieved over both target molecular weight and final polydispersity (Mw/Mn = 1.10-1.35). Suitable methacrylic monomers include 2-aminoethyl methacrylate hydrochloride, 2-(diethylamino)ethyl methacrylate, 2-(dimethylamino)ethyl methacrylate, 2-hydroxyethyl methacrylate, 2-hydroxypropyl methacrylate, 2-(methacryloyloxy)ethyl phosphorylcholine, glycerol monomethacrylate, potassium 3-sulfopropyl methacrylate, and quaternized 2-(dimethylamino)ethyl methacrylate. These homopolymer precursors were then efficiently clicked using either propargyl methacrylate or propargyl acrylate to yield near-monodisperse (meth)acrylate-capped macromonomers with either cationic, anionic, nonionic, or zwitterionic character. Moreover, this generic route to well-defined hydrophilic macromonomers is also suitable for “one-pot” syntheses, as exemplified for 2-hydroxyethyl methacrylate and glycerol monomethacrylate-based macromonomers.