270 resultados para Plating.
Resumo:
Electroless nickel (EN) coatings are recognised for their hardness and wear resistance in automotive and aerospace industries. In this work, electroless Ni–P coatings were deposited on aluminium alloy substrate LM24 (Al–9 wt.% Si alloy) and the effect of post treatment on the wear resistance was studied. The post treatments included heat treatment and lapping with two different surface textures. Scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), X-ray diffraction (XRD) and micro-abrasion tester were used to analyse morphology, structure and abrasive wear resistance of the coatings. Post heat treatment significantly improved the coating density and structure, giving rise to enhanced hardness and wear resistance. Microhardness of electroless Ni–P coatings with thickness of about 15 μm increased due to the formation of Ni3P after heat treatment.
Resumo:
Electroless plating of binary Ni-P, ternary Ni-Sn-P and Ni-W-P, and quaternary Ni-W-Sn-P alloy coatings was carried out in alkalicitrate baths. After the plating, several kinds of test were carried out to determine the improvement in the characteristics and properties due to the additional elements as well as to study the change in behaviour when heat treatment was applied to these coatings. The coatings were subjected to X-ray diffraction analysis where it was found that all the coatings were amorphous. Interesting surface morphology features were examined using scanning electron microscopy. Addition of a third element improved the hardness.
Resumo:
Evidence has accumulated that radiation induces a transmissible persistent destabilization of the genome, which mag. result in effects arising in the progeny of irradiated but surviving cells. An enhanced death rate among the progeny of cells surviving irradiation persists for many generations in the form of a reduced plating efficiency. Such delayed reproductive death is correlated with an increased occurrence of micronuclei. Since it has been suggested that radiation-induced chromosomal instability might depend on the radiation quality, we investigated the effects of alpha particles of different LET by looking at the frequency of delayed micronuclei in Chinese hamster V79 cells after cytochalasin-induced block of cell division, A dose-dependent increase in the frequency of micronuclei was found in cells assayed 1 week postirradiation or later. Also, there was a persistent increase in the frequency of dicentrics in surviving irradiated cells, Moreover, we found an increased micronucleus frequency in all of the 30 clones isolated from individual cells which had been irradiated with doses equivalent to either one, two or three alpha-particle traversals per cell nucleus, We conclude that the target for genomic instability in Chinese hamster cells must be larger than the cell nucleus. (C) 1997 by Radiation Research Society
Resumo:
To develop a detection method for human pathogenic Listeria monocytogenes, novel specific antibodies were obtained from hybridoma libraries generated by using formalin-killed and heat-killed L. monocytogenes as immunogens. Several monoclonal antibodies found to be specific to Listeria spp or L. monocytogenes were evaluated for their applicability as binders for bead array and sandwichELISA for detection of L. monocytogenes in buffer and in 11 different food types. The bead array format consistently demonstrated lower detection limits and was less affected by interference from food matrices than the sandwich ELISA format. However, the obtained detection limits were not sufficient to satisfy the required standard for L. monocytogenes testing. Therefore, the international organizationfor standardization (ISO 11290-1:1996) methods for pre-enrichment and enrichment were employed to increase the bacteria numbers. When compared to the standard plating method, the bead array was able to detect the bacteria with the same accuracy even at the 1 CFU level after only 24 hours of the enrichment period. In addition, Listeria-specific 3C3 and L. monocytogenes-specific 7G4 antibodies were successfully employed to construct a multiplex detection for Listeria, Salmonella and Campylobacter in a bead array format by combining with commercial Salmonella-specific and available Campylobacter-specific antibodies.
Resumo:
This study investigates potential causes of a novel blister-like syndrome in the plating coral Echinopora lamellosa. Visual inspections of this novel coral syndrome showed no obvious signs of macroparasites and the blisters themselves manifested as fluid-filled sacs on the surface of the coral, which rose from the coenosarc between the coral polyps. Histological analysis of the blisters showed that there was no associated necrosis with the epidermal or gastrodermal tissues. The only difference between blistered areas and apparently healthy tissues was the presence of proliferated growth (possible mucosal cell hyperplasia) directly at the blister interface (area between where the edge of the blister joined apparently healthy tissue). No bacterial aggregates were identified in any histological samples, nor any sign of tissue necrosis identified. We conclude, that the blister formations are not apparently caused by a specific microbial infection, but instead may be the result of irritation following growth anomalies of the epidermis. However, future work should be conducted to search for other potential casual agents, including viruses. © 2014 Smith et al.
Resumo:
Introduction and Aims: Previous studies have shown that the lungs of Cystic Fibrosis (CF) and bronchiectasis (BE, not caused by CF) patients are colonised by a range of aerobic and anaerobic bacteria. As bacteria are also implicated in the pathogenesis and progression of chronic obstructive pulmonary disease (COPD), this study aimed to determine the culture microbiome of the COPD airways.
Methods: Samples were collected from 13 stable COPD patients during routine bronchoscopy. Bronchial washings were taken at a single location in the right middle lobe by flushing and removing 30 ml of sterile saline. Samples were cultured under strict anaerobic conditions with bacteria detected by plating on both selective and non-selective agar media and quantified by total viable count (TVC). Identification of the cultured bacteria was performed by amplification and subsequent sequencing of the 16sRNA gene.
Results: Mean FEV1 was 1.36 (range 0.84–2.26, mean per cent predicted FEV1, 54%), and the mean ratio (FEV1/FVC) was 51%. Bacteria were detected in 12/13 samples (92%) with bacteria from the genera Streptococcus [12/13 samples, 92%; mean (range) TVC 9.62×105 cfu/ml (1.50×103–1.42×107)] and Haemophilus [4/13 samples, 31%; mean (range) 6.40×104 cfu/ml (2.20×103–1.60×105)] most frequently detected. Anaerobic bacteria primarily from the genera Prevotella [8/13 samples, 62%; mean (range) TVC 1.12×104 cfu/ml (1.30×103–4.20×104)] and Veillonella [5/13 samples, 38%; mean (range) TVC 1.29×105 cfu/ml (4.20×103–3.60×105)] were also detected. Pseudomonas and Moraxella were not detected in any samples.
Conclusions: Our results show that bacteria from the genera Streptococcus, Haemophilus, Prevotella and Veillonella are frequently present the airways of patients suffering from COPD. Taking account of the dilutional effect of the bronchial wash procedure and extrapolating to allow comparison with sputum data in our laboratory for CF and BE, the relative load of bacteria from the genera Streptococcus, Prevotella and Veillonella is similar in these three airway diseases. The potential role of these bacteria in the progression and pathogenesis of COPD requires further investigation.
Resumo:
The fabrication and operation of an ammonia chemoresistor is described. The sensor responds to changes in the resistance (impedance) of a thin layer of conductive polymer is due to changes in ammonia concentration. The polyaniline film was deposited by electroless plating (dipping) method on interdigitated array made by photolithographic technique. The PANI film was characterized by UV/VIS and IR Spectroscopy and respectively, Atomic Force Microscopy. Impedance Spectroscopy was used for sensor characterization
Resumo:
The development of metal deposition processes based on electroless nickel, alloy and composite coatings on various surfaces has witnessed a surge in interest among researchers, with many recent applications made possible from many excellent properties. In recent years, these coatings have shown promising corrosion and wear resistance properties and large number of newer developments became most important from macro to nano level applications. After a brief review of the fundamental aspects underlying the coating processes, this paper discusses in detail about different electroless nickel alloy, composite, nano plating, bath techniques, preparation, characterization, new depositing mechanism and their recent applications, including brief notes on difficult substrate and waste treatment for green environment. Emphasis will be onto their recent progress, which will be discussed in detail and critically reviewed.
Resumo:
This study rigorously evaluated a previously developed immunobead array method to simultaneously detect three important foodborne pathogens, Campylobacter jejuni, Listeria monocytogenes, and Salmonella spp., for its actual application in routine food testing. Due to the limitation of the detection limit of the developed method, an enrichment step was included in this study by using Campylobacter Enrichment Broth for C. jejuni and Universal Pre-enrichment Broth for L. monocytogenes and Salmonella spp.. The findings show that the immunobead array method was capable of detecting as low as 1 CFU of the pathogens spiked in the culture media after being cultured for 24 hours for all three pathogens. The immunobead array method was further evaluated for its pathogen detection capabilities in ready-to-eat (RTE) and ready-to-cook (RTC) chicken samples and proven to be able to detect as low as 1 CFU of the pathogens spiked in the food samples after being cultured for 24 hours in the case of Salmonella spp., and L. monocytogenes and 48 hours in the case of C. jejuni. The method was subsequently validated with three types of chicken products (RTE, n=30; RTC, n=20; raw chicken, n=20) and was found to give the same results as the conventional plating method. Our findings demonstrated that the previously developed immunobead array method could be used for actual food testing with minimal enrichment period of only 52 hours, whereas the conventional ISO protocols for the same pathogens take 90-144 hours. The immunobead array was therefore an inexpensive, rapid and simple method for the food testing.
Resumo:
A valorização de diferentes resíduos industriais provenientes dosector de tratamento/revestimento de superfícies metálicas pode ser obtida utilizando-os como matérias-primas na formulação de pigmentos cerâmicos, sintetizados pelo método cerâmico convencional. Neste trabalho avaliou-se a viabilidade de incorporar lamas geradas pelos processos de (i) anodização, ricas em alumínio, (ii) de niquelagem e cromagem de torneiras, usadas como fonte de níquel e crómio, e (iii) da decapagem química de aços de uma trefilaria, ricas em ferro, utilizadas por si só, ou em conjunto com matérias-primas comerciais, para a obtenção depigmentos cerâmicos que coram, de forma estável, diversas matrizes cerâmicas e vítreas. Esta solução assegura ainda a inertização de potenciaisespécies perigosas presentes nos resíduos, resultando produtos inócuospara a saúde pública. Procedeu-se à caracterização de cada resíduo, em termos de composição química e mineralógica, comportamento térmico, grau de toxicidade, distribuição granulométrica, teor de humidade, etc. Verificou-se a constância das características das lamas, recorrendo à análise de lotes recolhidos em momentos distintos. Os resíduos são essencialmente constituídos por hidróxidos metálicos e foram utilizados após secagem e desagregação. No entanto, a lama de anodização de alumínio sofreu um tratamento térmico suplementar a 1400ºC. O método de síntese dos pigmentos englobou as seguintes etapas: (i) doseamento; (ii) homogeneização; (iii) calcinação; (iv) lavagem e moagem.Procedeu-se à caracterização dos pigmentos, avaliando a cor por espectroscopia de reflectância difusae pelo método CIELAB e determinando as características físico-químicas relevantes. Posteriormente, testou-se o seu desempenho em produtos cerâmicos distintos (corpos e vidrados), aferindo o desempenho cromático e a estabilidade. Numa primeira fase, desenvolveram-se e caracterizaram-se tipos distintos de pigmentos: (i) com base na estrutura do corundo (ii) verde Victória deuvarovite (iii) violeta de cassiterite com crómio (iv) pigmento carmim de malaiaíte; (v)pretos e castanhos com base na estrutura da espinela. Aprofundaram-se depois os estudos do pigmento carmim de malaiaítee do pigmento preto com base na estrutura da espinela. O pigmento carmim de malaiaíte, CaSnSiO5:Cr2O3, é formulado coma lama gerada no processo de niquelagem e cromagem. Avaliou-se a influência do teor de lama na temperatura de síntese e na qualidade cromática, em comparação com um pigmento formulado com reagentes puros. O pigmento preto com estrutura de espinela de níquel, crómio e ferro, foii formulado exclusivamente a partir das lamas geradas nos processos de cromagem/niquelagem e de decapagem química do aço. Avaliaram-se as características cromáticas e o grau de inertização dos elementos tóxicospresentes, em função da estequiometria e do tratamento térmico. Estudou-se ainda um novo sistema com base na estrutura da hibonite(CaAl12O19), que permite a obtenção de pigmentos azuis e que utiliza a lama de cromagem e niquelagem. As espécies cromóforas (Ni2+ ou Co2+) assumem coordenação tetraédrica quando substituem os iões Al3+ que ocupam as posições M5 da rede da hibonite. A formação simultânea de anortite permite reduzir a temperatura de síntese.Para além do carácter inovador deste pigmento de dissolução sólida, a qualidade cromática e a sua estabilidade são interessantes. Além disso, os teores de cobalto ou níquel são reduzidosrelativamente aos utilizados em formulações comerciais de pigmentos azuis, o que se traduz em importantes vantagens económicas e ambientais.
Resumo:
Cationic porphyrins have been widely used as photosensitizers (PSs) in the inactivation of microorganisms, both in biofilms and in planktonic forms. However, the application of curcumin, a natural PS, in the inactivation of biofilms, is poorly studied. The objectives of this study were (1) to evaluate and compare the efficiency of a cationic porphyrin tetra (Tetra-Py+-Me) and curcumin in the photodynamic inactivation of biofilms of Pseudomonas spp and the corresponding planktonic form; (2) to evaluate the effect of these PSs in cell adhesion and biofilm maturation. In eradication assays, biofilms of Pseudomonas spp adherent to silicone tubes were subjected to irradiation with white light (180 J cm-2) in presence of different concentrations (5 and 10 μM) of PS. In colonization experiments, solid supports were immersed in cell suspensions, PS was added and the mixture experimental setup was irradiated (864 J cm-2) during the adhesion phase. After transference solid supports to new PS-containing medium, irradiation (2592 J cm-2) was resumed during biofilm maturation. The assays of inactivation of planktonic cells were conducted in cell suspensions added of PS concentrations equivalent to those used in experiments with biofilms. The inactivation of planktonic cells and biofilms (eradication and colonization assays) was assessed by quantification of viable cells after plating in solid medium, at the beginning and at the end of the experiments. The results show that porphyrin Tetra-Py+-Me effectively inactivated planktonic cells (3.7 and 3.0 log) and biofilms of Pseudomonas spp (3.2 and 3.6 log). In colonization assays, the adhesion of cells was attenuated in 2.2 log, and during the maturation phase, a 5.2 log reduction in the concentration of viable cells was observed. Curcumin failed to cause significant inactivation in planktonic cells (0.7 and 0.9 log) and for that reason it was not tested in biofilm eradication assays. In colonization assays, curcumin did not affect the adhesion of cells to the solid support and caused a very modest reduction (1.0 log) in the concentration of viable cells during the maturation phase. The results confirm that the photodynamic inactivation is a promising strategy to control installed biofilms and in preventing colonization. Curcumin, however, does not represent an advantageous alternative to porphyrins in the case of biofilms of Pseudomonas spp.
Resumo:
L’adiponectine, une adipokine aux niveaux plasmatiques inversement associés aux composantes du syndrome métabolique, protège contre l’athérosclérose et réduit les risques d’infarctus du myocarde. Les cellules progénitrices endothéliales (EPCs) jouent un rôle dans la réparation vasculaire et leur nombre est réduit chez les patients atteints de maladies cardiovasculaires. Nous croyons que les effets de l’adiponectine peuvent s’expliquer entre autres via ses interactions avec les EPCs. Trois sous-population d’EPCs, isolées du sang de donneurs sains, ont été caractérisées par immunophénotypage par cytométrie en flux. L’expression des récepteurs de l’adiponectine, AdipoR1, AdipoR2 et H-cadherin par les EPCs et les cellules endothéliales a été évaluée par qPCR. Les effets de l’adiponectine sur la migration et l’apoptose des EPCs et sur l’apoptose des HUVECs ont été étudiés. L’expression de l’élastase des neutrophiles par les EPCs et son activité ont été testées. Les résultats de qPCR montrent que l’AdipoR1 est plus fortement exprimé que l’AdipoR2 alors qu’H-cadhérine n’est pas détectable dans les EPCs. Les EPCs précoces expriment aussi l’élastase. L’expression d’AdipoR1 a été confirmée par immunobuvardage. L’adiponectine augmente de façon significative la survie de deux sous-populations d’EPCs, mais pas celle des HUVECs, en condition de privation de sérum. L’activité de l’élastase a été confirmée dans le milieu conditionné par les EPCs. Les EPCs expriment les récepteurs de l’adiponectine et l’élastase. L’adiponectine protège les EPCs contre l’apoptose et pourrait augmenter leur capacité de réparation vasculaire. L’activité élastase des EPCs pourrait moduler localement l’activité de l’adiponectine par la génération de sa forme globulaire.
Resumo:
Traditionnellement associée à la reproduction féminine, l'ocytocine (OT), une hormone peptidique synthétisée par les noyaux paraventriculaire et supraoptique de l'hypothalamus et sécrétée par l'hypophyse postérieure (neurohypophyse), a été récemment revue et a été démontrée avoir plusieurs nouveaux rôles dans le système cardio-vasculaire. En effet, notre laboratoire a montré que l’OT peut induire la différenciation des cellules souches embryonnaires (CSE) en cardiomyocytes (CM) fonctionnels. À l’aide du modèle cellulaire embryonnaire carcinomateux de souris P19, il a été démontré que ce processus survenait suite à la libération de la guanosine monophosphate cyclique (GMPc) dépendante du monoxyde d’azote. De même, il est connu que le peptide natriurétique auriculaire (ANP), un peptide produit, stocké et sécrété par les myocytes cardiaques, peut aussi induire la production du GMPc. De nombreuses études ont démontré que le cœur ayant subi un infarctus pouvait être régénéré à partir d’une population isolée de cellules souches et progénitrices transplantées. Une de ces populations de cellules, fréquemment isolées à partir d'organes provenant d'animaux aux stades de développement embryonnaire et adulte, appelée « Side Population » (SP), sont identifiées par cytométrie en flux (FACS) comme une population de cellules non marquées par le colorant fluorescent Hoechst 33342 (Ho). Les cellules SP expriment des protéines de transport spécifiques, de la famille ATP-binding cassette, qui ont pour rôle de transporter activement le colorant fluorescent Ho de leur cytoplasme. La sous-population de cellules SP isolée du cœur affiche un potentiel de différenciation cardiaque amélioré en réponse à un traitement avec l’OT. Récemment, l'hétérogénéité phénotypique et fonctionnelle des CSE a été mise en évidence, et cela a été corrélé avec la présence de sous-populations cellulaires ressemblant beaucoup aux cellules SP issues du cœur. Puisque l’ANP peut induire la production du GMPc et qu’il a été démontré que la différenciation cardiaque était médiée par la production du GMPc, alors nous émettons l'hypothèse selon laquelle l’ANP pourrait induire la différenciation cardiaque. Étant donné que les CSE sont composés d’un mélange de différents types cellulaires alors nous émettons aussi l’hypothèse selon laquelle l’utilisation d’une sous-population de CSE plus homogène renforcerait le potentiel de différenciation de l'ANP. Méthodes : Les SP ont été isolées des cellules P19 par FACS en utilisant la méthode d’exclusion du colorant fluorescent Ho. Puis, leur phénotype a été caractérisé par immunofluorescence (IF) pour les marqueurs de l’état indifférencié, d’auto-renouvellement et de pluripotence octamer-binding transcription factor 4 (OCT4) et stage-specific embryonic antigen-1 (SSEA1). Ensuite, la dose pharmacologique optimale d’ANP a été déterminée via des tests de cytotoxicité sur des cellules P19 (MTT assay). Pour induire la différenciation en cardiomyocytes, des cellules à l’état de sphéroïdes ont été formées à l’aide de la technique du « Hanging-Drop » sous la stimulation de l’ANP pendant 5 jours. Puis, des cryosections ont été faites dans les sphéroïdes afin de mettre en évidence la présence de marqueurs de cellules cardiaques progénitrices tels que GATA4, Nkx2.5 et un marqueur mitochondrial spécifique Tom22. Ensuite, les cellules SP P19 ont été stimulées dans les sphéroïdes cellulaires par le traitement avec de l'ANP (10-7 M) ou de l’OT (10-7 M), de l’antagoniste spécifique du guanylate cyclase particulé (GCp) A71915 (10-6 M), ainsi que la combinaison des inducteurs OT+ANP, OT+A71915, ANP+A71915. Après la mise en culture, la différenciation en cardiomyocytes a été identifié par l’apparition de colonies de cellules battantes caractéristiques des cellules cardiaques, par la détermination du phénotype cellulaire par IF, et enfin par l’extraction d'ARN et de protéines qui ont été utilisés pour le dosage du GMPc par RIA, l’expression des ARNm par RT-PCR et l’expression des protéines par immunobuvardage de type western. Résultats : Les sphéroïdes obtenus à l’aide de la technique du « Hanging-Drop » ont montré une hausse modeste de l’expression des ARNm suivants : OTR, ANP et GATA4 comparativement aux cellules cultivées en monocouches. Les sphéroïdes induits par l’ANP ont présenté une augmentation significative des facteurs de transcription cardiaque GATA4 et Nkx2.5 ainsi qu’un plus grand nombre de mitochondries caractérisé par une plus grande présence de Tom22. De plus, L’ANP a induit l’apparition de colonies de cellules battantes du jour 7 (stade précoce) au jour 14 (stade mature) de façon presque similaire à l’OT. Cependant, la combinaison de l’ANP avec l’OT n’a pas induit de colonies de cellules battantes suggérant un effet opposé à celui de l’OT. Par IF, nous avons quantifié (nombre de cellules positives) et caractérisé, du jour 6 au jour 14 de différenciation, le phénotype cardiaque de nos cellules en utilisant les marqueurs suivants : Troponine T Cardiaque, ANP, Connexines 40 et 43, l’isoforme ventriculaire de la chaîne légère de myosine (MLC-2v), OTR. Les SP différenciées sous la stimulation de l’ANP ont montré une augmentation significative du GMPc intracellulaire comparé aux cellules non différenciées. À notre grande surprise, l’antagoniste A71915 a induit une plus grande apparition de colonies de cellules battantes comparativement à l’OT et l’ANP à un jour précoce de différenciation cardiaque et l’ajout de l’OT ou de l’ANP a potentialisé ses effets, augmentant encore plus la proportion de colonies de cellules battantes. De plus, la taille des colonies de cellules battantes était encore plus importante que sous la simple stimulation de l’OT ou de l’ANP. Les analyses radioimmunologiques dans les cellules SP P19 stimulés avec l’ANP, A71915 et la combinaison des deux pendant 15min, 30min et 60min a montré que l’ANP stimule significativement la production du GMPc, cependant A71915 n’abolit pas les effets de l’ANP et celui-ci au contraire stimule la production du GMPc via des effets agonistes partiels. Conclusion : Nos résultats démontrent d’une part que l’ANP induit la différenciation des cellules SP P19 en CM fonctionnels. D’autre part, il semblerait que la voie de signalisation NPRA-B/GCp/GMPc soit impliquée dans le mécanisme de différenciation cardiaque puisque l’abolition du GMPc médiée par le GCp potentialise la différenciation cardiaque et il semblerait que cette voie de signalisation soit additive de la voie de signalisation induite par l’OT, NO/GCs/GMPc, puisque l’ajout de l’OT à l’antagoniste A71915 stimule plus fortement la différenciation cardiaque que l’OT ou l’A71915 seuls. Cela suggère que l’effet thérapeutique des peptides natriurétiques observé dans la défaillance cardiaque ainsi que les propriétés vasodilatatrices de certains antagonistes des récepteurs peptidiques natriurétiques inclus la stimulation de la différenciation des cellules souches en cardiomyocytes. Cela laisse donc à penser que les peptides natriurétiques ou les antagonistes des récepteurs peptidiques natriurétiques pourraient être une alternative très intéressante dans la thérapie cellulaire visant à induire la régénération cardiovasculaire.
Resumo:
Warships are generally sleek, slender with V shaped sections and block coefficient below 0.5, compared to fuller forms and higher values for commercial ships. They normally operate in the higher Froude number regime, and the hydrodynamic design is primarily aimed at achieving higher speeds with the minimum power. Therefore the structural design and analysis methods are different from those for commercial ships. Certain design guidelines have been given in documents like Naval Engineering Standards and one of the new developments in this regard is the introduction of classification society rules for the design of warships.The marine environment imposes subjective and objective uncertainties on ship structure. The uncertainties in loads, material properties etc.,. make reliable predictions of ship structural response a difficult task. Strength, stiffness and durability criteria for warship structures can be established by investigations on elastic analysis, ultimate strength analysis and reliability analysis. For analysis of complicated warship structures, special means and valid approximations are required.Preliminary structural design of a frigate size ship has been carried out . A finite element model of the hold model, representative of the complexities in the geometric configuration has been created using the finite element software NISA. Two other models representing the geometry to a limited extent also have been created —- one with two transverse frames and the attached plating alongwith the longitudinal members and the other representing the plating and longitudinal stiffeners between two transverse frames. Linear static analysis of the three models have been carried out and each one with three different boundary conditions. The structural responses have been checked for deflections and stresses against the permissible values. The structure has been found adequate in all the cases. The stresses and deflections predicted by the frame model are comparable with those of the hold model. But no such comparison has been realized for the interstiffener plating model with the other two models.Progressive collapse analyses of the models have been conducted for the three boundary conditions, considering geometric nonlinearity and then combined geometric and material nonlinearity for the hold and the frame models. von Mises — lllyushin yield criteria with elastic-perfectly plastic stress-strain curve has been chosen. ln each case, P-Delta curves have been generated and the ultimate load causing failure (ultimate load factor) has been identified as a multiple of the design load specified by NES.Reliability analysis of the hull module under combined geometric and material nonlinearities have been conducted. The Young's Modulus and the shell thickness have been chosen as the variables. Randomly generated values have been used in the analysis. First Order Second Moment has been used to predict the reliability index and thereafter, the probability of failure. The values have been compared against standard values published in literature.
Resumo:
This thesis entitled Physicochemical and molecular characterization of bacteriophages ΦSP-1and ΦSP-3, specific for pathogenic Salmonella and evaluation of their potential as biocontrol agent . Salmonella were screened using standard methodologies from various environmental samples including chicken caecum. Salmonella strains, which were previously isolated and stocked in the lab, were also included in this study as host, for screening Salmonella specific lytic phages. The Salmonella strain in this study designated as S49 which helped in phage propagation by acting as host bacteria was identified as Salmonella enterica subsp. enterica by 16S rRNA gene analysis and serotyping . A total of three Salmonella specific phage named as ΦSP-1, ΦSP-2 and ΦSP-3 were isolated from chicken intestine samples via an enrichment protocol employing the double agar overlay method. ΦSP-1 and ΦSP-3 showing consistent lytic nature were selected for further study and were purified by repeated plating after picking of single isolated plaques from the lawns of Salmonella S49 plates. Both the phages produced small, clear plaques indicating their lytic nature. ΦSP-1 and ΦSP-3 were concentrated employing PEG-NaCl precipitation method before further characterization. The focus of present study was to isolate, characterize and verify the efficacy of lytic bacteriophages against the robust pathogen Salmonella, capable of surviving under various hostile conditions. Two phages, ΦSP-1 and ΦSP-3, belonging to two families, Podovoridae and Siphoviridae were isolated.