Determining shoal membership: A comparison between momentary and trajectory-based methods

Miller and Gerlai proposed two methods for determining shoal membership in Danio rerio, one based on momentary mean inter-individual distances and the other on post hoc analysis of the trajectories of nearest-neighbor distances. We propose a method based on momentary nearest-neighbor distances and compare the three methods using simulation. In general, our method yielded results that were more similar to their second method than their first one, and is computationally simpler.

Trajectory and predictors of quality of life in first episode psychotic mania.

BACKGROUND: Little is known about the trajectory of quality of life (QoL) following a first episode of psychotic mania in bipolar disorder (BD). This 18-month longitudinal study investigated the trajectory of QoL, and the influence of premorbid adjustment and symptoms on 18-month QoL in a cohort of young people experiencing a first episode of psychotic mania. METHODS: As part of an overarching clinical trial, at baseline, sixty participants presenting with a first episode of psychotic mania (BD Type 1 - DSM-IV) completed symptomatic and functional assessments in addition to the Premorbid Adjustment Scale - General Subscale. Symptom measures were repeated at 18-month follow up. QoL was rated using the Quality of Life Scale (QLS) at designated time points. RESULTS: Mean QLS scores at initial measurement (8 weeks) were 61% of the maximum possible score, increasing significantly to 70% at 12 months, and 71.2% at 18-month follow-up. Premorbid adjustment and 18-month depressive symptoms were significantly associated with QoL at 18-month follow-up. LIMITATIONS: Study limitations include the small sample size, inclusion of participants with psychotic mania only, use of measures originally designed for use with schizophrenia spectrum disorders, and lack of premorbid or baseline measurement of QoL. CONCLUSIONS: Results suggest that QoL can be maintained early in BD, and reinforce the importance of assertively treating depressive symptoms throughout the course of this disorder. The emergence of a link between premorbid adjustment and poorer QoL in this cohort highlights the importance of assessing facets of adjustment when planning psychological interventions.

Image guided critical screw placement precision in the cervical spine : important or incidental? : results of a series of 91 consecutive cases using OVEM

Study design: A retrospective study of image guided cervical implant placement precision. Objective: To describe a simple and precise classification of cervical critical screw placement. Summary of Background Data: "Critical" screw placement is defined as implant insertion into a bone corridor which is surrounded circumferentially by neurovascular structures. While the use of image guidance has improved accuracy, there is currently no classification which provides sufficient precision to assess the navigation success of critical cervical screw placement. Methods: Based on postoperative clinical evaluation and CT imaging, the orthogonal view evaluation method (OVEM) is used to classify screw accuracy into grade I (no cortical breach), grade la (screw thread cortical breach), grade II (internal diameter cortical breach) and grade III (major cortical breach causing neural or vascular injury). Grades II and III are considered to be navigation failures, after accounting for bone corridor / screw mismatch (minimal diameter of targeted bone corridor being smaller than an outer screw diameter). Results: A total of 276 screws from 91 patients were classified into grade I (64.9%), grade la (18.1%), and grade II (17.0%). No grade III screw was observed. The overall rate of navigation failure was 13%. Multiple logistic regression indicated that navigational failure was significantly associated with the level of instrumentation and the navigation system used. Navigational failure was rare (1.6%) when the margin around the screw in the bone corridor was larger than 1.5 mm. Conclusions: OVEM evaluation appears to be a useful tool to assess the precision of critical screw placement in the cervical spine. The OVEM validity and reliability need to be addressed. Further correlation with clinical outcomes will be addressed in future studies.

Estimation des coûts engendrés par l'occupation inappropriée des lits de soins aigus du CHUV par des patients en attente de placement

[Table des matières] 1. Pourquoi s'intéresser à l'occupation inappropriée des lits de soins aigus au CHUV ?. - 1.1. Etat des lieux. - 1.1.1. Les chiffres du CHUV. - 1.1.2. La cellule de gestion des flux de patients. - 1.1.3. L'unité de patients en attente de placement. - 1.1.4. La pénurie de lits dans les EMS vaudois. - 1.1.5. Le vieillissement de la population vaudoise. - 1.2. Evidences nationales et internationales. - - 2. Estimation des coûts. - 2.1. Coûts chiffrables. - 2.1.1. Perte financière directe. - 2.1.2. Coûts des transferts pour engorgement. - 2.1.3. Coût d'opportunité. - 2.2. Coûts non chiffrables. - 2.2.1. Patients. - 2.2.2. Personnel médical. - 2.2.3. CHUV. - - 3. Propositions. - 3.1. Prises en charge alternatives. - 3.1.1. Les réseaux intégrés de services aux personnes âgées. - 3.1.2. Les courts séjours gériatriques. - 3.1.3. Autres solutions. - 3.2. Prévention. - 3.2.1. Prévention des chutes. - 3.2.2. La prévention par l'information aux personnes âgées. - 3.2.3. La prévention par l'information à l'ensemble de la population

Product placement on personal blogs: a multiple case study from companies’ perspective

As traditional advertising is losing its value in corporations’ marketing, new and growing social media marketing channels are increasing their importance. The growing interest in the media and the lack of research on the subject create a clear need for this study. The objectives are to increase understanding about product placement in personal blogs and examine the benefits as well as the downsides created by this marketing channel and present the requirements for success. The study also takes a stand on what kind of things a successful product placement strategy in personal blogs includes and what points should be considered when creating a strategy. The study’s empirical part consists of seven thematic interviews with case companies’ representatives and one agent. The study’s personal blogs were delimited to consist only lifestyle and fashion blogs. The results show that product placement on personal lifestyle and fashion blogs is a strongly growing marketing channel and it is best suited to reach young women. It is also a very good channel to change and improve brand image. Via personal blogs it is possible to reach a large number of consumers with a very cost-efficient manner. Thus utilizing the channel is suitable for all companies regardless of the size of the marketing budget. Of course, companies have to consider the suitability of their product to the themes of blogs. Executing a successful campaign in this media requires good relationship management skills and understanding of this particular media as the final content is not in advertiser’s hands. As a marketing channel, personal blogs differ highly from traditional marketing channels because of their constantly changing nature and multidirectional quality where several parties are in interaction.

Dynamic optimization for the trajectory planning of robot manipulators in the presence of obstacles

This paper presents an approach to the solution of moving a robot manipulator with minimum cost along a specified geometric path in the presence of obstacles. The main idea is to express obstacle avoidance in terms of the distances between potentially colliding parts. The optimal traveling time and the minimum mechanical energy of the actuators are considered together to build a multiobjective function. A simple numerical example involving a Cartesian manipulator arm with two-degree-of-freedom is described.

Stiffness based trajectory planning and feedforward based vibration suppression control of parallel robot machines

The dissertation proposes two control strategies, which include the trajectory planning and vibration suppression, for a kinematic redundant serial-parallel robot machine, with the aim of attaining the satisfactory machining performance. For a given prescribed trajectory of the robot's end-effector in the Cartesian space, a set of trajectories in the robot's joint space are generated based on the best stiffness performance of the robot along the prescribed trajectory. To construct the required system-wide analytical stiffness model for the serial-parallel robot machine, a variant of the virtual joint method (VJM) is proposed in the dissertation. The modified method is an evolution of Gosselin's lumped model that can account for the deformations of a flexible link in more directions. The effectiveness of this VJM variant is validated by comparing the computed stiffness results of a flexible link with the those of a matrix structural analysis (MSA) method. The comparison shows that the numerical results from both methods on an individual flexible beam are almost identical, which, in some sense, provides mutual validation. The most prominent advantage of the presented VJM variant compared with the MSA method is that it can be applied in a flexible structure system with complicated kinematics formed in terms of flexible serial links and joints. Moreover, by combining the VJM variant and the virtual work principle, a systemwide analytical stiffness model can be easily obtained for mechanisms with both serial kinematics and parallel kinematics. In the dissertation, a system-wide stiffness model of a kinematic redundant serial-parallel robot machine is constructed based on integration of the VJM variant and the virtual work principle. Numerical results of its stiffness performance are reported. For a kinematic redundant robot, to generate a set of feasible joints' trajectories for a prescribed trajectory of its end-effector, its system-wide stiffness performance is taken as the constraint in the joints trajectory planning in the dissertation. For a prescribed location of the end-effector, the robot permits an infinite number of inverse solutions, which consequently yields infinite kinds of stiffness performance. Therefore, a differential evolution (DE) algorithm in which the positions of redundant joints in the kinematics are taken as input variables was employed to search for the best stiffness performance of the robot. Numerical results of the generated joint trajectories are given for a kinematic redundant serial-parallel robot machine, IWR (Intersector Welding/Cutting Robot), when a particular trajectory of its end-effector has been prescribed. The numerical results show that the joint trajectories generated based on the stiffness optimization are feasible for realization in the control system since they are acceptably smooth. The results imply that the stiffness performance of the robot machine deviates smoothly with respect to the kinematic configuration in the adjacent domain of its best stiffness performance. To suppress the vibration of the robot machine due to varying cutting force during the machining process, this dissertation proposed a feedforward control strategy, which is constructed based on the derived inverse dynamics model of target system. The effectiveness of applying such a feedforward control in the vibration suppression has been validated in a parallel manipulator in the software environment. The experimental study of such a feedforward control has also been included in the dissertation. The difficulties of modelling the actual system due to the unknown components in its dynamics is noticed. As a solution, a back propagation (BP) neural network is proposed for identification of the unknown components of the dynamics model of the target system. To train such a BP neural network, a modified Levenberg-Marquardt algorithm that can utilize an experimental input-output data set of the entire dynamic system is introduced in the dissertation. Validation of the BP neural network and the modified Levenberg- Marquardt algorithm is done, respectively, by a sinusoidal output approximation, a second order system parameters estimation, and a friction model estimation of a parallel manipulator, which represent three different application aspects of this method.

Exploring Teacher Candidates’ Perception of Practicum Placement Within Concurrent Teacher Education in Two Ontario Universities

In this study, teacher candidates’ perception of their concurrent education program at two Ontario universities were examined, with specific emphasis on how the programs utilized practicum placements, to determine the effectiveness in preparing teacher candidates to teach. This research also strived to uncover the best ways to optimize concurrent teacher education through practicum placements. A questionnaire and interviews were used to uncover teacher candidates’ perceptions at one teacher education program that used full integration of practicum and one that used minimal integration of practicum. The findings revealed that teacher candidates were generally more satisfied with the overall program when there was full integration of practicum. There were statistically significant differences found between the two concurrent programs with regard to practicum time and preparedness and context of the practicum and a highly significant difference found for theory-practice divide. There was also a statistically significant difference (p < .05) observed between the teacher candidates at each university in terms of their beliefs about the need for improvement of their program. Some of the improvements that participants believed could be made to their respective programs included having (a) exceptional mentor teachers and teacher educators, (b) longer placements with a balance of observation and practicum teaching, (c) clear expectations and evaluations of practicum placement, and (d) more distinct connections between theory and practice made within the programs.

Assessing waiting times in the clinical trajectory of patients with lung cancer

Le cancer du poumon a une incidence et une létalité parmi les plus hautes de tous les cancers diagnostiqués au Canada. En considérant la gravité du pronostic et des symptômes de la maladie, l’accès au traitement dans les plus brefs de délais est essentiel. Malgré l’engagement du gouvernement fédéral et les gouvernements provinciaux de réduire les délais de temps d’attente, des balises pour les temps d’attente pour le traitement d’un cancer ne sont toujours pas établis. En outre, le compte-rendu des indicateurs des temps d’attente n’est pas uniforme à travers les provinces. Une des solutions proposées pour la réduction des temps d’attente pour le traitement du cancer est les équipes interdisciplinaires. J’ai complété un audit du programme interdisciplinaire traitant le cancer du poumon à l’Hôpital général juif (l’HGJ) de 2004 à 2007. Les objectifs primaires de l’étude étaient : (1) de faire un audit de la performance de l’équipe interdisciplinaire à l’HGJ en ce qui concerne les temps d’attente pour les intervalles critiques et les sous-groupes de patients ; (2) de comparer les temps d’attente dans la trajectoire clinique des patients traités à l’HGJ avec les balises qui existent ; (3) de déterminer les facteurs associés aux délais plus longs dans cette population. Un objectif secondaire de l’étude était de suggérer des mesures visant à réduire les temps d’attente. Le service clinique à l’HGJ a été évalué selon les balises proposées par le British Thoracic Society, Cancer Care Ontario, et la balise pan-canadienne pour la radiothérapie. Les patients de l’HGJ ont subi un délai médian de 9 jours pour l’intervalle «Ready to treat to first treatment», et un délai médian de 30 jours pour l’intervalle entre le premier contact avec l’hôpital et le premier traitement. Les patients âgés de plus de 65 ans, les patients avec une capacité physique diminuée, et les patients avec un stade de tumeur limité étaient plus à risque d’échouer les balises pour les temps d’attente.

Src family kinases are required for limb trajectory selection by spinal motor axons

Signal relay by guidance receptors at the axonal growth cone is a process essential for the assembly of a functional nervous system. We investigated the in vivo function of Src family kinases (SFKs) as growth cone guidance signaling intermediates in the context of spinal lateral motor column (LMC) motor axon projection toward the ventral or dorsal limb mesenchyme. Using in situ mRNA detection we determined that Src and Fyn are expressed in LMC motor neurons of chick and mouse embryos at the time of limb trajectory selection. Inhibition of SFK activity by C-terminal Src kinase (Csk) overexpression in chickLMCaxons using in ovo electroporation resulted inLMC axons selecting the inappropriate dorsoventral trajectory within the limb mesenchyme, with medial LMC axon projecting into the dorsal and ventral limb nerve with apparently random incidence. We also detected LMC axon trajectory choice errors in Src mutant mice demonstrating a nonredundant role for Src in motor axon guidance in agreement with gain and loss of Src function in chickLMCneurons which led to the redirection ofLMCaxons. Finally, Csk-mediated SFK inhibition attenuated the retargeting ofLMCaxons caused by EphA or EphB over-expression, implying the participation of SFKs in Eph-mediated LMC motor axon guidance. In summary, our findings demonstrate that SFKs are essential for motor axon guidance and suggest that they play an important role in relaying ephrin:Eph signals that mediate the selection of motor axon trajectory in the limb.