Microarray-based detection of 90 antibiotic resistance genes of gram-positive bacteria

A disposable microarray was developed for detection of up to 90 antibiotic resistance genes in gram-positive bacteria by hybridization. Each antibiotic resistance gene is represented by two specific oligonucleotides chosen from consensus sequences of gene families, except for nine genes for which only one specific oligonucleotide could be developed. A total of 137 oligonucleotides (26 to 33 nucleotides in length with similar physicochemical parameters) were spotted onto the microarray. The microarrays (ArrayTubes) were hybridized with 36 strains carrying specific antibiotic resistance genes that allowed testing of the sensitivity and specificity of 125 oligonucleotides. Among these were well-characterized multidrug-resistant strains of Enterococcus faecalis, Enterococcus faecium, and Lactococcus lactis and an avirulent strain of Bacillus anthracis harboring the broad-host-range resistance plasmid pRE25. Analysis of two multidrug-resistant field strains allowed the detection of 12 different antibiotic resistance genes in a Staphylococcus haemolyticus strain isolated from mastitis milk and 6 resistance genes in a Clostridium perfringens strain isolated from a calf. In both cases, the microarray genotyping corresponded to the phenotype of the strains. The ArrayTube platform presents the advantage of rapidly screening bacteria for the presence of antibiotic resistance genes known in gram-positive bacteria. This technology has a large potential for applications in basic research, food safety, and surveillance programs for antimicrobial resistance.

Effect of indomethacin on bile acid-phospholipid interactions: implication for small intestinal injury induced by nonsteroidal anti-inflammatory drugs.

The injurious effect of nonsteroidal anti-inflammatory drugs (NSAIDs) in the small intestine was not appreciated until the widespread use of capsule endoscopy. Animal studies found that NSAID-induced small intestinal injury depends on the ability of these drugs to be secreted into the bile. Because the individual toxicity of amphiphilic bile acids and NSAIDs directly correlates with their interactions with phospholipid membranes, we propose that the presence of both NSAIDs and bile acids alters their individual physicochemical properties and enhances the disruptive effect on cell membranes and overall cytotoxicity. We utilized in vitro gastric AGS and intestinal IEC-6 cells and found that combinations of bile acid, deoxycholic acid (DC), taurodeoxycholic acid, glycodeoxycholic acid, and the NSAID indomethacin (Indo) significantly increased cell plasma membrane permeability and became more cytotoxic than these agents alone. We confirmed this finding by measuring liposome permeability and intramembrane packing in synthetic model membranes exposed to DC, Indo, or combinations of both agents. By measuring physicochemical parameters, such as fluorescence resonance energy transfer and membrane surface charge, we found that Indo associated with phosphatidylcholine and promoted the molecular aggregation of DC and potential formation of larger and isolated bile acid complexes within either biomembranes or bile acid-lipid mixed micelles, which leads to membrane disruption. In this study, we demonstrated increased cytotoxicity of combinations of bile acid and NSAID and provided a molecular mechanism for the observed toxicity. This mechanism potentially contributes to the NSAID-induced injury in the small bowel.

Investigation of young water inflow in karst aquifers using SF6–CFC–3H/He–85Kr–39Ar and stable isotope components

Karst aquifers are known for their wide distribution of water transfer velocities. From this observation, a multiple geochemical tracer approach seems to be particularly well suited to provide a significant assessment of groundwater flows, but the choice of adapted tracers is essential. In this study, several common tracers in karst aquifers such as physicochemical parameters, major ions, stable isotopes, and d13C to more specific tracers such as dating tracers – 14C, 3H, 3H–3He, CFC-12, SF6 and 85Kr, and 39Ar – were used, in a fractured karstic carbonated aquifer located in Burgundy (France). The information carried by each tracer and the best sampling strategy are compared on the basis of geochemical monitoring done during several recharge events and over longer time periods (months to years). This study’s results demonstrate that at the seasonal and recharge event time scale, the variability of concentrations is low for most tracers due to the broad spectrum of groundwater mixings. The tracers used traditionally for the study of karst aquifers, i.e., physicochemical parameters and major ions, efficiently describe hydrological processes such as the direct and differed recharge, but require being monitored at short time steps during recharge events to be maximized. From stable isotopes, tritium, and Cl� contents, the proportion of the fast direct recharge by the largest porosity was estimated using a binary mixing model. The use of tracers such as CFC-12, SF6, and 85Kr in karst aquifers provides additional information, notably an estimation of apparent age, but they require good preliminary knowledge of the karst system to interpret the results suitably. The CFC-12 and SF6 methods efficiently determine the apparent age of baseflow, but it is preferable to sample the groundwater during the recharge event. Furthermore, these methods are based on different assumptions such as regional enrichment in atmospheric SF6, excess air, and flow models among others. 85Kr and 39Ar concentrations can potentially provide a more direct estimation of groundwater residence time. Conversely, the 3H–3He method is inefficient in the karst aquifer for dating due to 3He degassing.

MECHANISMS OF SPECIES DIFFERENCES IN BRAIN ACETYLCHOLINESTERASE SENSITIVITY TO ORGANOPHOSPHATE INHIBITION

In vitro incubation of acetylcholinesterase from brain tissue of several species with organophosphate compounds indicated that the concentrations required to inhibit 50% of acetylcholinesterase activity (IC(,50)) differed from species to species for the same compound (Murphy, et al., 1968; Andersen, et al., 1972, 1977 and 1978).^ The hypothesis that non-specific binding proteins (Lauwerys and Murphy, 1969a,b) exerts a protective effect on acetylcholinesterase, and thus cause the differences observed in IC(,50) studies was tested by a ('3)H-DFP binding experiment. It was found that differences in the amount of non-specific binding protein cannot explain the observed differences observed in IC(,50) studies.^ An alternative hypothesis, that acetylcholinesterase from different species have different affinities for binding and/or different rates of phosphorylation by organophosphate insecticides was tested by determining the apparent affinity constant (k(,a)) and apparent rate of phosphorylation (k(,p)). Kinetic studies indicated that acetylcholinesterases from different species have different sensitivities to inhibition by organophosphate insecticides, and the differences are due to different affinities for binding and/or different rates of phosphorylation by the same organophosphate compound.^ Studies of the spontaneous reactivation of acetylcholinesterase after inhibition by organophosphate insecticides also indicated that acetylcholinesterases from different species have different rates and extents of spontaneous reactivation. This further substantiates the hypothesis that acetylcholinesterases from different species have different kinetic characteristics with respect to organophosphate insecticides inhibition.^ Eleven paraoxon analogs were synthesized for a quantitative structure-activity relationship study. It was found that the electron-withdrawing power ((sigma)) and hydrophobicity ((PARAGR)) of the substituent are important in determining the anti-cholinesterase activity of paraoxon analogs. Thus, predictions of species differences in acetylcholinesterase sensitivities to paraoxon analogs can be made if the physicochemical parameters ((sigma) and (PARAGR)) of the substituents are known.^ In another approach, i.e. enzyme modeling, the sensitivity of rat brain acetylcholinesterase to organophosphate insecticides was used as the independent variable to predict the sensitivities of acetylcholinesterases from other species to the same compound. Regression equations were derived for each species based on nineteen organophosphate insecticides studied. It was found, that in addition to paraoxon analogs, this method is also applicable to other organophosphate compounds with wide variations in structure. Thus, the sensitivities of acetylcholinesterases from other species can also be predicted from the sensitivity of rat brain acetylcholinesterase. ^

Performance enhancement of large industrial wastewater stabilization ponds

A 6-month-long, bench-scale simulation of an industrial wastewater stabilization pond (WSP) system was conducted to evaluate responses to several potential performance-enhancing treatments. The industrial WSP system consists of an anaerobic primary (1ry) WSP treating high-strength wastewater, followed by facultative secondary (2ry) and aerobic tertiary (3ry) WSPs in series treating lower-strength wastewater. The 1ry WSP was simulated with four glass aquaria which were fed with wastewater from the actual WSP system. The treatments examined were phosphorus supplementation (PHOS), phosphorus supplementation with pH control (PHOS+ALK), and phosphorus supplementation with pH control and effluent recycle (PHOS+ALK+RCY). The supplementary phosphorus treatment alone did not yield any significant change versus the CONTROL 1ry model pond. The average carbon to phosphorus ratio of the feed wastewater received from the WSP system was already 100:0.019 (i.e., 2,100 mg/l: 0.4 mg/l). The pH-control treatments (PHOS+ALK and PHOS+ALK+RCY) produced significant results, with 9 to 12 percent more total organic carbon (TOC) removal, 43 percent more volatile organic acid (VOA) generation, 78 percent more 2-ethoxyethanol and 14 percent more bis(2-chloroethyl)ether removal, and from 100- to 10,000-fold increases in bacterial enzyme activity and heterotrophic bacterial numbers. Recycling a 10-percent portion of the effluent yielded less variability for certain physicochemical parameters in the PHOS+ALK+RCY 1ry model pond, but overall there was no statistically-detectable improvement in performance versus no recycle. The 2ry and 3ry WSPs were also simulated in the laboratory to monitor the effect and fate of increased phosphorus loadings, as might occur if supplemental phosphorus were added to the 1ry WSP. Noticeable increases in algal growth were observed at feed phosphorus concentrations of 0.5 mg/l; however, there were no significant changes in the monitored physicochemical parameters. The effluent phosphorus concentrations from both the 2ry and 3ry model ponds did increase notably when feed phosphorus concentrations were increased from 0.5 to 1.0 mg/l. ^

Chemical composition of clinopyroxenes and melt inclusions in clinopyroxenes from rocks of the Malaita Island, Ontong Java Plateau (Pacific Ocean)

The paper is based on new results of melt inclusion studies in minerals. Physicochemical and geochemical parameters of plateau basalt magmatic systems of the Siberian Platform and Ontong Java Plateau (Pacific Ocean) have been established. The studied melts are enriched in Fe. That differs them from magmatic melts of mid-ocean ridges (MOR). A comparative analysis of data on inclusions has shown a similarity of continental and oceanic plateau basalt magmatic systems. They considerably differ from those of MOR and intraplate oceanic islands. Crystallization of oceanic plateau basalts took place at lower temperatures and pressures as compared with similar rocks of the Siberian Platform. The data on inclusions evidence that the melts of the Siberian Platform and the Malaita Island underwent a serious evolution in contrast to magmas of the Nauru Basin that have more stable geochemical parameters. The most fractionated low-temperature high-Fe magmas with elevated contents of trace and rare-earth elements occur in the Malaita Island (Ontong Java Plateau) magmatic system.

Chemical composition of rocks and minerals from the Karymsky volcanic center, Eastern Kamchatka

The powerful eruption in the Akademii Nauk caldera on January 2, 1996 marked a new activity phase of the Karymsky volcano and became a noticeable event in the history of modern volcanism in Kamchatka. The paper reports data obtained by studying more than 200 glassy melt inclusions in phenocrysts of olivine (Fo82-72), plagioclase (An92-73), and clinopyroxene (Mg# 83-70) in basalts of the 1996 eruption. The data were used to estimate composition of the parental melt and physicochemical parameters of the magma evolution. According to our data, the parental melt corresponded to low magnesium, high aluminum basalt (SiO2 = 50.2%, MgO = 5.6%, Al2O3 = 17%) of the mildly potassium type (K2O = 0.56%) and contained much dissolved volatile components (H2O = 2.8%, S = 0.17%, and Cl = 0.11%). Melt inclusions in the minerals are similar in chemical composition, a fact testifying that the minerals crystallized simultaneously with one another. Their crystallization started at pressure ~1.5 kbar, proceeded within a narrow temperature range of 1040+/-20°C, and continued until near-surface pressure ~100 bar was reached. Degree of crystallization of the parental melt during its eruption was close to 55%. Massive crystallization was triggered by H2O degassing under pressure <1 kbar. Magma degassing in an open system resulted in escape of 82% H2O, 93% S, and 24% Cl (of their initial contents in the parental melt) to the fluid phase. Release of volatile compounds to the atmosphere during the eruption that lasted for 18 h was estimated as 1.7x10**6 t H2O, 1.4x10**5 t S, and 1.5x10**4 t Cl. Concentrations of most incompatible trace elements in the melt inclusions are close to those in the rocks and to the expected fractional differentiation trend. Melt inclusions in plagioclase were found to be selectively enriched in Li. The Li-enriched plagioclase with melt inclusions thought to originate from cumulate layers in the feeding system beneath Karymsky volcano, in which plagioclase interacted with Li-rich melts/brines and was subsequently entrapped and entrained by the magma during the 1996 eruption.

Metabolic responses to temperature stress under elevated pCO2 in Crepidula fornicata

In the current context of environmental change, ocean acidification is predicted to affect the cellular processes, physiology and behaviour of all marine organisms, impacting survival, growth and reproduction. In relation to thermal tolerance limits, the effects of elevated pCO2 could be expected to be more pronounced at the upper limits of the thermal tolerance window. Our study focused on Crepidula fornicata, an invasive gastropod which colonized shallow waters around European coasts during the 20th century. We investigated the effects of 10 weeks' exposure to current (380 µatm) and elevated (550, 750, 1,000 µatm) pCO2 on this engineer species using an acute temperature increase (1 °C/12 h) as the test. Respiration rates were measured on both males (small individuals) and females (large individuals). Mortality increased suddenly from 34 °C, particularly in females. Respiration rate in C. fornicata increased linearly with temperature between 18 and 34 °C, but no differences were detected between the different pCO2 conditions either in the regressions between respiration rate and temperature or in Q10 values. In the same way, condition indices were similar in all the pCO2 treatments at the end of the experiment, but decreased from the beginning of the experiment. This species was highly resistant to acute exposure to high temperature regardless of pCO2 levels, even though food was limited during the experiment. Crepidula fornicata appears to have either developed resistance mechanisms or a strong phenotypic plasticity to deal with fluctuations of physicochemical parameters in its habitat. This suggests that invasive species may be more resistant to future environmental changes than its native competitors.

Obtención de clones de alcornoque (Quercus suber L.) mediante embriogénesis somática: aplicación de medios líquidos y biorreactores en la sincronización de los procesos de desarrollo y maduración de los embriones

El alcornoque tiene un gran valor ambiental, como integrante de los ecosistemas forestales mediterráneos, e interés comercial por el valor de la bellota (alimentación del cerdo ibérico), el carbón, la madera y sobre todo por las aplicaciones industriales del corcho. Las posibilidades de mejora genética del alcornoque, como las de otras especies forestales, están limitadas por sus largos ciclos reproductivos y porque su propagación vegetativa mediante estaquillado solo es posible en estados muy juveniles. Por ello este sistema de propagación tiene muy poca, o ninguna, utilidad práctica en la mejora genética. La embriogénesis somática es la vía más apropiada para la clonación de muchas especies forestales y ha hecho posible el desarrollo a gran escala de plantaciones multivarietales de coníferas. En alcornoque es posible la regeneración completa de árboles adultos mediante embriogénesis somática. Con los protocolos actuales (en medio semisólido), los embriones se generan formando acúmulos y en la fase de multiplicación conviven embriones en distintos estados de desarrollo. Es un sistema asincrónico, con baja eficacia para la propagación en masa, que no elimina completamente las dificultades para el desarrollo de programas de mejora genética del alcornoque. En otras especies la utilización de medios líquidos ha mejorado: la sincronización, productividad de los cultivos, el manejo y reducido los costes de producción. Por ello el desarrollo de suspensiones embriogénicas de alcornoque se plantea como una vía para aumentar la eficacia de la propagación clonal a gran escala. En la presente tesis se desarrollan cultivos embriogénicos de alcornoque en medio líquido. El capítulo 3 aborda el establecimiento y mantenimiento de suspensiones, el capítulo 4 el desarrollo de una fase de proliferación en medio líquido y el capítulo 5 la utilización de sistemas de cultivo en medio líquido, estacionarios y de inmersión temporal, como vía para favorecer la maduración de los embriones somáticos. Para iniciar los cultivos en medio líquido se emplearon agregados de embriones tomados de la fase de proliferación en medio semisólido. Cuando estos agregados se inocularon directamente en medio líquido no se logró el establecimiento de las suspensiones. El establecimiento se consiguió empleando como inóculo las células y Resumen pequeños agregados embriogénicos, de tamaño comprendido entre 41 y 800 μm, desprendidas por agitación breve de los agregados de embriones. El mantenimiento se logró inoculando en baja densidad masas embriogénicas compactas de tamaño comprendido entre 0,8 y 1,2 mm. Estas suspensiones, muy heterogéneas, mantuvieron su capacidad de proliferación y de regeneración de embriones al menos durante diez subcultivos consecutivos. El protocolo de iniciación y mantenimiento, desarrollado inicialmente con un solo genotipo, fue eficaz cuando se probó sobre otros 11 genotipos de alcornoque. En la fase de proliferación se ensayaron tres tipos de envase y tres velocidades de agitación. La combinación envase × velocidad determinó el intercambio gaseoso, la disponibilidad de oxígeno y el estrés hidrodinámico. Los agregados embriogénicos de alcornoque crecieron incluso en condiciones de hipoxia no siendo la disponibilidad de oxígeno un factor limitante del crecimiento para tasas de trasferencia de oxígeno comprendidas entre 0,11 h-1 y 1,47 h-1. Por otra parte la producción de biomasa creció con el estrés hidrodinámico para valores de índice de cizalladura inferiores a 5 x 10-3 cm min-1. La mayor producción de biomasa se obtuvo con matraces Erlenmeyer de 100 ml y alta velocidad de agitación (160 rpm) mientras que la diferenciación de embriones se vio favorecida por bajas velocidades de agitación (60 rpm) asociadas con bajas disponibilidades de oxígeno. La posibilidad de madurar embriones de alcornoque en medio líquido se estudió utilizando sistemas de inmersión permanente y sistemas de inmersión temporal. En inmersión permanente no se diferenciaron embriones cotiledonares (posiblemente por hiperhidricidad). Los sistemas de inmersión temporal permitieron obtener embriones maduros en estado cotiledonar y capaces de regenerar plantas in vitro. Concentraciones de sacarosa superiores a 60 g l-1 y frecuencias de inmersión iguales o inferiores a una diaria, tuvieron efectos negativos para el desarrollo de los embriones somáticos. En los sistemas de inmersión temporal los parámetros físico-químicos del medio de cultivo se mantuvieron estables y no se observó ninguna limitación de nutrientes. No obstante, estos sistemas se vieron afectados por la evaporación que generó el flujo de aire necesario para desplazar el líquido en cada periodo de inmersión. Abstract ABSTRACT Cork oak is one of the most important tree species of the Mediterranean ecosystem. Besides its high environmental value has a great economic interest due to the sustainable production of acorns (to feed the Iberian pig) charcoal, timber and cork, which is a renewable natural product with various technological applications. As happens with other forest species, cork oak genetic improvement programs are limited by their long life cycles and because vegetative propagation by cuttings it´s only possible in very juvenile plants. Hence this propagation system is useless or has little practical use for breeding cork oak. Plant regeneration by somatic embryogenesis is the most suitable way for cloning many forest species, and it is the enabling technology which has allowed the establishment of large-scale conifer multi-varietal plantations. Clonal plant regeneration of mature cork oak trees can be achieved through somatic embryogenesis. Somatic embryos at different stages of development and forming clusters are produced during the multiplication phase with current protocols (using semisolid medium). This is an asynchronous low-efficient process not suitable for mass propagation, and therefore it does not solve the difficulties presented by cork oak breeding programs. Culture in liquid medium has been used with other species to improve: synchronization, yield, handling, and to reduce production costs. Thus the development of cork oak embryogenic suspension cultures is envisaged as a way to increase the efficiency of large scale clonal propagation. The thesis herein develops cork oak embryogenic cultures in liquid medium. In chapter 3 establishment and maintenance of suspension cultures are developed, chapter 4 studies proliferation phase in liquid medium and chapter 5 considers the use of different systems of culture in liquid medium, both stationary and temporary immersion, as a way to promote somatic embryos maturation. Clusters of embryos taken from proliferating cultures on semisolid medium were used to initiate the cultures in liquid medium. When these clusters were inoculated directly in liquid medium establishment of suspension cultures was not executed. However using, as initial inoculum, cells and cell aggregates with a size between 41 and 800 μm detached from these clusters of embryos, subjected to a brief shaking, suspension cultures could be established. Suspension maintenance was achieved by inoculating compact embryogenic Abstract clumps with a size between 0.8 and 1.2 mm at low density. The suspension cultures, very heterogeneous, retained both their proliferation and embryo regeneration capacity for at least ten consecutive subcultures. The initiation and maintenance protocol, initially developed with a single genotype, was effective when tested on 11 additional genotypes of cork oak. In proliferation phase three types of vessels and three different levels of agitation were assayed. The combination vessel × orbiting speed determined gas exchange, oxygen availability and hydrodynamic stress. Cork oak embryogenic aggregates grew even under hypoxia conditions; oxygen availability at transfer rates between 0.11 and 1.47 h-1 was not a limiting factor for growth. Furthermore the biomass production was increased with hydrodynamic stress when shear rate values were of less than 5 x 10-3 cm min-1. The highest biomass production was obtained with 100 ml Erlenmeyer flask and high stirring speed (160 rpm) while the differentiation of embryos was favored by low agitation speeds (60 rpm) associated with low oxygen availability. The possibility to mature cork oak somatic embryos in liquid medium was studied using both permanent immersion systems and temporary immersion systems. Cotyledonary embryos did not differentiate in permanent immersion conditions (probably due to hyperhydricity). Temporary immersion systems allowed obtaining mature cotyledonary embryos, which were able to regenerate plants in vitro. Sucrose concentrations above 60 g l-1 and immersion frequencies equal to or lower than one each 24 h had negative effects on somatic embryo development. Physicochemical parameters of the culture medium in temporary immersion systems were stable and showed no limitation of nutrients. However, these systems were affected by the evaporation generated by the airflow necessary to relocate the medium at each immersion period.

Composition, potential emissions and agricultural value of pig slurry from Spanish commercial farms

Pig slurry is a valuable fertilizer for crop production but at the same time its management may pose environmental risks. Slurry samples were collected from 77 commercial farms of four animal categories (gestating and lactating sows, nursery piglets and growing pigs) and analyzed for macronutrients, micronutrients, heavy metals and volatile fatty acids. Emissions of ammonia (NH3) and biochemical methane potential (BMP) were quantified. Slurry electrical conductivity, pH, dry matter content and ash content were also determined. Data analysis included an analysis of correlations among variables, the development of prediction models for gaseous emissions and the analysis of nutritional content of slurries for crop production. Descriptive information is provided in this work and shows a wide range of variability in all studied variables. Animal category affected some physicochemical parameters, probably as a consequence of different slurry management and use of cleaning water. Slurries from gestating sows and growing pigs tended to be more concentrated in nutrients, whereas the slurry from lactating sows and nursery piglets tended to be more diluted. Relevant relationships were found among slurry characteristics expressed in fresh basis and gas emissions. Predictive models using on-farm measurable parameters were obtained for NH3 (R2 = 0.51) and CH4

Effect of vesicle size on tissue localization and immunogenicity of liposomal DNA vaccines

The formulation of plasmid DNA (pDNA) in cationic liposomes is a promising strategy to improve the potency of DNA vaccines. In this respect, physicochemical parameters such as liposome size may be important for their efficacy. The aim of the current study was to investigate the effect of vesicle size on the in vivo performance of liposomal pDNA vaccines after subcutaneous vaccination in mice. The tissue distribution of cationic liposomes of two sizes, 500 nm (PDI 0.6) and 140 nm (PDI 0.15), composed of egg PC, DOPE and DOTAP, with encapsulated OVA-encoding pDNA, was studied by using dual radiolabeled pDNA-liposomes. Their potency to elicit cellular and humoral immune responses was investigated upon application in a homologous and heterologous vaccination schedule with 3 week intervals. It was shown that encapsulation of pDNA into cationic lipsomes resulted in deposition at the site of injection, and strongest retention was observed at large vesicle size. The vaccination studies demonstrated a more robust induction of OVA-specific, functional CD8+ T-cells and higher antibody levels upon vaccination with small monodisperse pDNA-liposomes, as compared to large heterodisperse liposomes or naked pDNA. The introduction of a PEG-coating on the small cationic liposomes resulted in enhanced lymphatic drainage, but immune responses were not improved when compared to non-PEGylated liposomes. In conclusion, it was shown that the physicochemical properties of the liposomes are of crucial importance for their performance as pDNA vaccine carrier, and cationic charge and small size are favorable properties for subcutaneous DNA vaccination.

Uptake and transport of orally-deliverable drugs across caco-2 cell monolayers:the effect of lipid formulations

The aim of this thesis is to investigate the physicochemical parameters which can influence drug loading within liposomes and to characterise the effect such formulations have on drug uptake and transport across in vitro epithelial barrier models. Liposomes composed of phosphatidylcholine (PC) or distearoyl phosphatidylcholine (DSPC) and cholesterol (0, 4, 8, 16 µM) were prepared and optimised in terms of drug loading using the hand-shaking method (Bangham et al., 1965). Subsequently, liposomes composed of 16 µM PC or DSPC and cholesterol (4 µM) were used to monitor hydroxybenzoate release and transport from Iiposomes. The MIT (3[4,5-Dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide) and crystal violet assays were employed to determine toxicity of the Iiposome. formulations towards the Caco-2 cell line, employed to model the epithelial barrier in vitro. Uptake and transport of mannitol, propranolol, glutamine and digoxin was measured in the presence and absence of Iiposome formulations to establish changes in absorption resulting from the presence of lipid formulations. Incorporation of the four hydroxybenzoates was shown to be influenced by a number of factors, including liposome composition and drug conformation. Methyl hydroxybenzo.ate (MP) was incorporated into the bilayer most effectively with percentage incorporation of 68% compared to 45% for butyl hydroxybenzoate (BP), despite its increased Iipophilicity. This was attributed to the decreased packing ability of BP within the hydrocarbon core of the lipid bilayer compared to MP. Release studies also suggested that the smaller MP was more strongly incorporated within the lipid bilayer with only 8% of the incorporated solute being released after 48-hours compared to 17% in the case of BP. Model transport studies were seen to reflect drug release profiles from the liposome bilayers with significantly (p < 0.01) higher amounts of BP partitioning from the liposome compared to MP, Caco-2 cell viability was maintained above 86% in the presence of all Iiposome formulations tested indicating the liposome formulations are non-toxic towards Caco-2 cells. Paracellular (apical-to-basolateral) transport of mannitol was significantly increased in the presence of DSPC, PC / DSPC:Cholesterol (16:4 µM; 1000 µg). Glutamine uptake and transport via the carrier-mediated route was Significantly (p < 0.01) increased in the presence of PC I DSPC:Cholesterol (16:0; 16:4 µM). Digoxin apical-to-basolateral transport was significantly increased (p < 0,01) in the presence of PC / DSPC:Cholesterol (16:0; 16:4 µM); thus reducing digoxin efflux via P-glycoprotein. In contrast, PC:ChoJesterol (16:0; 16:4 µM) significantly (p < 0.01) decreased propranolol uptake via the passive transcellular route. Bi-directional transport of propranolol was significantly (p < 0,01) decreased in the presence of PC/DSPC:Cholesterol (16:0; 16:4 µM). The structure of a solute is an important determinant for the incorporation and release of a solute from liposome formulations. PC, DSPC and cholesterol liposome formulations are nontoxic towards Caco-2 cell monolayers and improved uptake and transport of mannitol, glutamine. and digoxin across Caco-2 cell monolayers; thus providing a potential alternative delivery vehicle.