964 resultados para Phase content
Resumo:
The primary objective of this investigation was that of providing a comprehensive tissue-by-tissue assessment of water-electrolyte status in thermally-acclimated rainbow trout, Salmo gairdneri. To this end levels of water and the major ions, sodium, chloride and potassium were evaluated in the plasma, at three skeletal muscle sites, and in cardiac muscle, liver, spleen, gut and brain of animals acclimated to 2°, 10° and 18°C. The occurrence of possible seasonal variations in water-electrolyte balance was evaluated by sampling sununer and late fall-early winter populations of trout. On the basis of values for water and electrolyte content, estimates of extracellular and cellular phase volumes, cellular electrolyte concentrations and Nernst equilibrium potentials were made. Since accurate assessment of the extracellular phase volume is critical in the estimation of cellular electrolyte concentrations and parameters based on assumed cellular ion levels, [14 C]-polyethylene glycol-4000, which is assumed to be confined to the extracellular space, was employed to provide comparisons with various ion-defined spaces (H20~~s, H20~~/K and H20~~s). Subsequently, the ion-defined space yielding the most realistic estimate of extracellular phase volume for each tissue was used in cellular electrolyte calculations. Water and electrolyte content and distribution varied with temperature. Tissues, such as liver, spleen and brain appeared to be the most thermosensitive, whereas skeletal and cardiac muscle and gut tissue were less influenced. 'Summer' series trout appeared to be more capable of maintaining their water- electrolyte balance than the ~fall-winter' series animals. i The data are discussed in terms of their possible effect on maintenance of appropriate cellular metabolic and electrophysiological functions.
Resumo:
Résumé Cette recherche a débuté avec l’idée que l’Internet est en train de changer la manière dont nous créons des connaissances et du contenu culturel. Notre point de départ était d’utiliser l’Internet afin de rassembler et amplifier plusieurs points de vue dans un processus de design. Une approche complexe a exposé l’Internet comme un système et conséquemment comme une plateforme pour l’innovation. La structure ouverte de l’Internet a soutenu le mouvement participatif des usagers qui ont choisi de partager leurs besoins, leurs désirs et leurs solutions. Notre recherche a pour but d’étudier ce contenu généré par les usagers en ligne et comprendre sa valeur pour les designers. Les usagers créatifs veulent s’exprimer et participer activement dans le processus de design. Notre recherche tente de démontrer que les designers ont beaucoup à apprendre du contenu généré par les usagers car ceux-ci soumettent des éléments qui ont attrait à toutes les étapes du processus de design et révèlent des relations présentes dans la situation de design à l’étude. Pour en apprendre plus sur ce contenu nous nous demandons : Quel type d’information offre le contenu généré par les usagers pour la phase de recherche dans le processus de design. Afin de centrer la portée de l’étude, nous nous sommes aussi questionné si cette information est plus pertinente au design de produits, au design de services ou au design de système de produits et de services. Aspirant aux idéaux du design participatif, notre méthodologie fut développée afin d’apprendre comment le contenu généré par les usagers pourrait influencer le processus de design. Pour ce faire, nous avons choisi de chercher sur l’Internet pour du contenu qui concerne la mobilité via l’usage d’une automobile. Les trois différents types de média considérés étaient les vidéos sur YouTube, les images sur Flickr et les textes sur Blogger. Afin de répondre à notre première question de recherche, nous nous sommes penchés sur deux éléments lorsque l’on recherche pour le design : les espaces de design et les relations de design. Premièrement, nous avons catégorisé le contenu récolté selon l’espace problème, créatif et solution. Deuxièmement, nous avons catégorisé le contenu dépendant de laquelle des relations de design elle démontrait soit une combinaison d’usagers, objets et contextes. Dans le but de répondre à la deuxième question de cette recherche, nous avons examiné trois types V de produits de design : les automobiles privées comme produit, le partage de voiture comme système de produit et de service, et le taxi comme service. Chaque élément pertinent généré par les usagés trouvé dans cette recherche fut catégorisé jusqu’à ce que l’on récolte 50 échantillons pour chaque combinaison de ces variables. Nous en sommes arrivés avec une matrice de 50 éléments de chaque produit de design, pour chacun des médias, puis catégorisé selon les espaces de design et les relations dans le design. Cette recherche démontre que l’Internet, comme médium, produit les conditions avantageuses pour que les usagers partagent de grandes quantités de contenu original et diversifié qui est pertinent aux situations de design. À partir de nos données de recherche, nous avons identifié des tendances dans le contenu généré par les usagers. Notamment, nous sommes en mesure d’affirmer que le contenu généré par les usagers offre de l’information pertinente à la recherche pour le design, et ce dans tous les espaces de design et toutes les relations de design. Il en fut de même pour les différentes issues du design car du contenu sur les produits, les systèmes de produits et de services et les services était présent et pertinent. Bref, nous avons démontré que l’Internet supporte la créativité et conséquemment il y abonde de contenu créatif produit par les usagers. Suivant dans les traces dessinées par d’autres chercheurs en design participatif, cette étude devrait être considérée comme un nouvel exemple des moyens qu’ont les designers pour percevoir les besoins tacites des usagers en leur permettant d’exprimer leurs idées. Alors que ceux-ci créent librement et intuitivement ainsi exposant leurs besoins, solutions et idées, les designers peuvent porter un regard de tierce partie sur les résultats. Jumelant des techniques comme le crowdsourcing et le brainstorming, nous avons créé une nouvelle activité et le néologisme : brainsourcing. En demeurant dans une forme de pratique réflexive, les designers peuvent réfléchir et ajouter au contenu généré par les usagers qui lui n’est pas biaisé par une éducation ou une culture du design. Ce processus est similaire au design participatif professionnel où le brainsourcing est une activité parallèle lorsque le designer fait des recherches pour le design. C’est cette perspective sur la somme des idées des participants qui peut contribuer à comprendre la complexité de la situation de design. VI Cette recherche a aussi soulevé des questions par rapport à l’effet de démocratisation de l’Internet. Bien que les usagers n’ont pas l’éducation, ni les habiletés des designers, ils aspirent à démocratiser le processus du design en voulant participer activement et en exposant leurs besoins, idées et solutions. Nous avons pu déterminer que les usagers n’étaient pas qualifiés pour entreprendre le processus complet du design comme les designers professionnels, mais nous avons observé directement la capacité des usagers à mettre de l’avant leur créativité. À propos de la relation entre les usagers créatifs et les designers, nous avons étudié des langages communs tels les scénarios et les prototypes. Tous deux sont présents dans le contenu généré par les usagers que nous avons récolté dans nos recherches sur Internet. Ceci nous a mené vers une nouvelle perspective sur l’activité du design où des opportunités créatives ressortent d’une conversation avec les usagers. Cette recherche a dévoilé de grandes tendances dans la manière dont les usagers communiquent naturellement dans un processus de design. Nous espérons avoir offert un aperçu de comment les designers peuvent prendre avantage de tous les types de contenu généré par les usagers en ligne. Dans le futur, nous souhaitons que les designers aient la possibilité d’interagir avec les participants en prenant le rôle de facilitateur de la conversation. La responsabilité du résultat ne tombe pas sur les épaules du designer car son mandat est d’assurer le bon fonctionnement du processus. Les designers rejoignent les usagers en ne demandant plus comment les choses peuvent être créées, mais pourquoi elles devraient exister. En tant que designers, nous aspirons à générer plus à partir de nouvelles connaissances, nous aspirons à créer plus de sens. Mots clés: Recherche en design, complexité, design participatif, contenu généré par les usagers, démocratisation, Internet, créativité, crowdsourcing, brainstorming, brainsourcing, réflexion-en-action.
Resumo:
Les liposomes sont des nanovecteurs polyvalents et prometteurs quant à leur utilisation dans plusieurs domaines. Il y a une décennie, un nouveau type de liposome constitué d’amphiphiles monoalkylés et de stérols est né fortuitement dans notre groupe. Ils sont nommés Stérosomes puisqu’ils contiennent une grande proportion de stérols, entre 50 et 70 mol %. Les objectifs de cette thèse sont de développer de nouvelles formulations de Stérosomes ayant des caractéristiques spécifiques et d’acquérir une compréhension plus profonde des règles physicochimiques qui dictent leur comportement de phase. Nous avons spécifiquement examiné le rôle de motifs moléculaires des stérols, de la charge interfaciale et de la capacité à former des liaisons H dans les interactions intermoléculaires menant à l’autoassemblage. Le comportement de phase a été caractérisé par calorimétrie différentielle à balayage (DSC), par spectroscopie infrarouge (IR) et par spectroscopie de résonance magnétique nucléaire du deutérium (²H NMR). Premièrement, nous avons établi certaines corrélations entre la structure des stérols, leur tendance à former des bicouches fluides en présence d'amphiphile monoalkylé et la perméabilité des grandes vésicules unilamellaires (LUV) formées. La nature des stérols module les propriétés de mélange avec de l’acide palmitique (PA). Les stérols portant une chaîne volumineuse en position C17 sont moins aptes à induire des bicouches fluides que ceux qui ont une chaîne plus simple, comme celle du cholestérol. Un grand ordre de la chaîne alkyle de PA est un effet commun à tous les stérols investigués. Il a été démontré que la perméabilité des LUV peut être contrôlée en utilisant des stérols différents. Cependant, ces stérols n’ont aucun impact significatif sur la sensibilité des Stérosomes au pH. Afin de créer des liposomes qui sont sensibles au pH et qui ont une charge positive à la surface, des Stérosomes composés de stéarylamine et de cholestérol (Chol) ont été conçus et caractérisés. Il a été conclu que l’état de protonation de l’amine, dans ce travail, ou du groupe carboxylique, dans un travail précédent, confère une sensibilité au pH et détermine la charge à la surface du liposome. Les premiers Stérosomes complètement neutres ont été fabriqués en utilisant un réseau de fortes liaisons H intermoléculaires. Le groupe sulfoxyde est capable de former de fortes liaisons H avec le cholestérol et les molécules d’eau. Une bicouche fluide métastable a été obtenue, à la température de la pièce, à partir d'un mélange équimolaire d’octadécyl méthyl sulfoxyde (OMSO) et de Chol. Ce comportement distinct a permis d’extruder le mélange pour former des LUV à la température de la pièce. Après 30 h, le temps de vie de la phase métastable, des Stérosomes stables et imperméables existaient toujours sous une forme solide. Un diagramme de température-composition a été proposé afin de résumer le comportement de phase des mélanges d’OMSO/Chol. Finalement, nous avons élaboré des Stérosomes furtifs en incorporant du polyéthylène glycol (PEG) avec une ancre de cholestérol (PEG-Chol) à l’interface de Stérosomes de PA/Chol. Jusqu’à 20 mol % de PEG-Chol peut être introduit sans perturber la structure de la bicouche. La présence du PEG-Chol n’a aucun impact significatif sur la perméabilité de la LUV. L'encapsulation active de la doxorubicine, un médicament contre le cancer, a été réalisée malgré la faible perméabilité de ces LUV et la présence du PEG à l’interface. L’inclusion de PEG a modifié considérablement les propriétés de l’interface et a diminué la libération induite par la variation de pH observée avec des LUV nues de PA/Chol. Cette formulation inédite est potentiellement utile pour l’administration intraveineuse de médicaments.
Resumo:
En Amérique du Nord, les pratiques actuelles de conception de l’industrie de la construction suscitent de nombreux et importants problèmes, tant au niveau environnemental, que social et économique. Certaines tendances conceptuelles, telles que l’industrialisation de la construction, le bâtiment vert, l’approche diachronique et la rationalisation spatiale proposent des moyens afin de répondre à cette problématique. La conception synchronique, qui ne se base encore que sur des besoins immédiats, produit des bâtiments statiques qui ne peuvent accommoder l’évolution des besoins. En plus de la phase d’usage qui se révèle la plus coûteuse en termes de consommation d’énergie, d’eau, de matériaux et de génération de déchets, le bâtiment statique est amené à subir de nombreuses rénovations, profondément délétères pour l’environnement et la situation économique des ménages. Dans une perspective d’opérationnalisation du développement durable, la problématique de recherche concerne la considération de la phase d’usage dans le processus conceptuel de l’habitation. Dans l’optique de favoriser une conception plutôt diachronique, 55 projets de rénovation résidentiels ont été analysés et comparés afin de décrire la nature et l’intensité des interventions effectuées. L’examen des plans avant/après rénovation a permis de quantifier le niveau d’intensité des interventions et ainsi, mettre en relief certaines tendances et récurrences des pratiques actuelles. Dans le but de valider si le bâtiment vert est en mesure de répondre aux enjeux environnementaux contemporains de l’habitation, les contenus de trois programmes de certification utilisés en Amérique du Nord, à savoir BOMA-BESt®, LEED®, et Living Building ChallengeTM, sont analysés. Une classification des stratégies proposées montre la répartition des préoccupations envers le bâtiment, les systèmes et l’usager. Une analyse permet de mettre en relief que les considérations semblent, de façon générale, cohérentes avec les impacts associés à l’habitation. Un examen plus ciblé sur la teneur et les objectifs des stratégies considérant l’usager permet l’émergence de deux ensembles thématiques : les cinq sources potentielles d’impacts (énergie, eau, matériaux, déchets et environnement intérieur), ainsi que les quatre thèmes reliés aux objectifs et aux finalités des stratégies (entretien et surveillance; sensibilisation et formation; modélisation et mesurage; comportement et habitude). La discussion a permis d’émettre des pistes d’écoconception pour permettre à l’habitation d’accommoder l’évolution des besoins des occupants, à savoir la « démontabilité », l’aptitude à l’évolution et l’accessibilité. Des recommandations, telles que la nécessité de mieux prendre en compte l’usager comme facteur d’influence des impacts occasionnés par la phase d’usage, sont ensuite proposées. D’autres suggestions appellent à une concrétisation de la performance en suscitant l’implication, l’engagement, la responsabilisation et l’autonomisation des occupants. Enfin, il semble que certaines modifications des programmes de certification et de la législation en vigueur pourraient favoriser l’émergence d’une vision nouvelle concernant la nécessaire réduction de la superficie habitable. Toutes ces opportunités d’amélioration ont le potentiel de mener ce secteur vers une démarche plus globale et systémique, tout en bonifiant de façon majeure les implications environnementales, économiques et sociales de l’habitation.
Resumo:
Vanadia/ceria catalysts (2–10 wt% of V2O5) were prepared by wet impregnation of ammonium metavanadate in oxalic acid solution. Structural characterization was done with energy dispersive X-ray analysis (EDX), powder X-ray diffraction (XRD), BET surface area measurements, FT-IR spectroscopy and nuclear magnetic spectral analysis (51V MASNMR). XRD and 51V MASNMR results show highly dispersed vanadia species at lower loadings and the formation of CeVO4 phase at higher V2O5 loading. The catalytic activity of catalysts was conducted in liquid phase oxidation of ethylbenzene with H2O2 as oxidant. The oxidation activity is increased with loading up to 8 wt% V2O5 and then decreased with further increase in V2O5 content to 10 wt%. Different vanadia species evidenced by various techniques were found to be selective towards ethylbenzene oxidation. The CeVO4 formation associated with increased concentration of vanadia on ceria results the production of acetophenone along with 2-hydroxyacetophenone.
Resumo:
In the previous Comment, Forker and co-workers claim that perturbed angular correlation (PAC) data leave no alternative to the conclusion that the spontaneous magnetization of PrCo2 and NdCo2 undergoes a discontinuous, first-order phase transition at TC. We show here that their claim is in clear contradiction with a wealth of experimental evidence, including our own. Finally, we propose a possible origin for the disagreement between their interpretation of the PAC results and the literature on this subject.
Resumo:
The span of writer identification extends to broad domes like digital rights administration, forensic expert decisionmaking systems, and document analysis systems and so on. As the success rate of a writer identification scheme is highly dependent on the features extracted from the documents, the phase of feature extraction and therefore selection is highly significant for writer identification schemes. In this paper, the writer identification in Malayalam language is sought for by utilizing feature extraction technique such as Scale Invariant Features Transform (SIFT).The schemes are tested on a test bed of 280 writers and performance evaluated
Resumo:
Abstract 1: Social Networks such as Twitter are often used for disseminating and collecting information during natural disasters. The potential for its use in Disaster Management has been acknowledged. However, more nuanced understanding of the communications that take place on social networks are required to more effectively integrate this information into the processes within disaster management. The type and value of information shared should be assessed, determining the benefits and issues, with credibility and reliability as known concerns. Mapping the tweets in relation to the modelled stages of a disaster can be a useful evaluation for determining the benefits/drawbacks of using data from social networks, such as Twitter, in disaster management.A thematic analysis of tweets’ content, language and tone during the UK Storms and Floods 2013/14 was conducted. Manual scripting was used to determine the official sequence of events, and classify the stages of the disaster into the phases of the Disaster Management Lifecycle, to produce a timeline. Twenty- five topics discussed on Twitter emerged, and three key types of tweets, based on the language and tone, were identified. The timeline represents the events of the disaster, according to the Met Office reports, classed into B. Faulkner’s Disaster Management Lifecycle framework. Context is provided when observing the analysed tweets against the timeline. This illustrates a potential basis and benefit for mapping tweets into the Disaster Management Lifecycle phases. Comparing the number of tweets submitted in each month with the timeline, suggests users tweet more as an event heightens and persists. Furthermore, users generally express greater emotion and urgency in their tweets.This paper concludes that the thematic analysis of content on social networks, such as Twitter, can be useful in gaining additional perspectives for disaster management. It demonstrates that mapping tweets into the phases of a Disaster Management Lifecycle model can have benefits in the recovery phase, not just in the response phase, to potentially improve future policies and activities. Abstract2: The current execution of privacy policies, as a mode of communicating information to users, is unsatisfactory. Social networking sites (SNS) exemplify this issue, attracting growing concerns regarding their use of personal data and its effect on user privacy. This demonstrates the need for more informative policies. However, SNS lack the incentives required to improve policies, which is exacerbated by the difficulties of creating a policy that is both concise and compliant. Standardization addresses many of these issues, providing benefits for users and SNS, although it is only possible if policies share attributes which can be standardized. This investigation used thematic analysis and cross- document structure theory, to assess the similarity of attributes between the privacy policies (as available in August 2014), of the six most frequently visited SNS globally. Using the Jaccard similarity coefficient, two types of attribute were measured; the clauses used by SNS and the coverage of forty recommendations made by the UK Information Commissioner’s Office. Analysis showed that whilst similarity in the clauses used was low, similarity in the recommendations covered was high, indicating that SNS use different clauses, but to convey similar information. The analysis also showed that low similarity in the clauses was largely due to differences in semantics, elaboration and functionality between SNS. Therefore, this paper proposes that the policies of SNS already share attributes, indicating the feasibility of standardization and five recommendations are made to begin facilitating this, based on the findings of the investigation.
Resumo:
Ice clouds are an important yet largely unvalidated component of weather forecasting and climate models, but radar offers the potential to provide the necessary data to evaluate them. First in this paper, coordinated aircraft in situ measurements and scans by a 3-GHz radar are presented, demonstrating that, for stratiform midlatitude ice clouds, radar reflectivity in the Rayleigh-scattering regime may be reliably calculated from aircraft size spectra if the "Brown and Francis" mass-size relationship is used. The comparisons spanned radar reflectivity values from -15 to +20 dBZ, ice water contents (IWCs) from 0.01 to 0.4 g m(-3), and median volumetric diameters between 0.2 and 3 mm. In mixed-phase conditions the agreement is much poorer because of the higher-density ice particles present. A large midlatitude aircraft dataset is then used to derive expressions that relate radar reflectivity and temperature to ice water content and visible extinction coefficient. The analysis is an advance over previous work in several ways: the retrievals vary smoothly with both input parameters, different relationships are derived for the common radar frequencies of 3, 35, and 94 GHz, and the problem of retrieving the long-term mean and the horizontal variance of ice cloud parameters is considered separately. It is shown that the dependence on temperature arises because of the temperature dependence of the number concentration "intercept parameter" rather than mean particle size. A comparison is presented of ice water content derived from scanning 3-GHz radar with the values held in the Met Office mesoscale forecast model, for eight precipitating cases spanning 39 h over Southern England. It is found that the model predicted mean I WC to within 10% of the observations at temperatures between -30 degrees and - 10 degrees C but tended to underestimate it by around a factor of 2 at colder temperatures.
Resumo:
A model was devised to describe simultaneously the grain masses of water and dry matter against thermal time during grain filling and maturation of winter wheat. The model accounted for a linear increase in water mass of duration anthesis-m(1) (end of rapid water assimilation phase) and rate a, followed by a more stable water mass until in,, after which water mass declined rapidly at rate e. Grain dry matter was described as a linear increase of rate bgf until a maximum size (maxgf) was attained at m(2).The model was fitted to plot data from weekly samples of grains taken from replicated field experiments investigating effects of grain position (apical or medial), fungicide (five contrasting treatments), sowing date (early or late), cultivar (Malacca or Shamrock) and season (2001/2002 and 2002/2003) on grain filling. The model accounted for between 83 and 99% of the variation ( 2) when fitted to data from individual plots, and between 97 and 99% when fitted to treatment means. Endosperm cell number of grains from early-sown plots in the first season were also counted. Differences in maxgf between grain positions and also between cultivars were mostly the result of effects on bgf and were empirically associated with water mass at nil. Fungicide application controlled S. tritici and powdery mildew infection, delayed flag leaf senescence, increased water mass at m(1) (wm(1)), and also increased m(2), bgf and maxgf. Fungicide effects on water mass were detected before fungicide effects on dry matter, but comparison of the effects of individual fungicide treatments showed no evidence that effects on wm(1), nor on endosperm cell numbers at about m(1), were required for fungicide effects on maxgf, (c) 2005 Elsevier B.V. All rights reserved.
Resumo:
Campylobacter jejuni NCTC 11168 does not exhibit the general increase in cellular stress resistance on entry into stationary phase that is seen in most other bacteria. This is consistent with the lack of global stationary phase regulatory elements in this organism. deduced from an analysis of its genome sequence. We now show that C. jejuni NCTC 11168 does undergo certain changes in stationary phase, of a pattern not previously described. As cells entered stationary phase there was a change in membrane fatty acid composition, principally a decrease in the proportion of unsaturated fatty acids and an increase in the content of cyclopropane and short-chain fatty acids. These changes in membrane composition were accompanied by an increase in the resilience of the cell membrane towards loss of integrity caused by pressure and an increase in cellular pressure resistance. By contrast. there were no major changes in resistance to acid or heat treatment. A similar pattern of changes in stress resistance on entry, into stationary phase was seen in C. jejuni NCTC 11351, the type strain. These changes appear to represent a restricted Physiological response to the conditions existing in stationary phase cultures, in an organism having limited capacity for genetic regulation and adaptation to environment. © 2004 Elsevier B.V. All rights reserved.
Resumo:
Automatic indexing and retrieval of digital data poses major challenges. The main problem arises from the ever increasing mass of digital media and the lack of efficient methods for indexing and retrieval of such data based on the semantic content rather than keywords. To enable intelligent web interactions, or even web filtering, we need to be capable of interpreting the information base in an intelligent manner. For a number of years research has been ongoing in the field of ontological engineering with the aim of using ontologies to add such (meta) knowledge to information. In this paper, we describe the architecture of a system (Dynamic REtrieval Analysis and semantic metadata Management (DREAM)) designed to automatically and intelligently index huge repositories of special effects video clips, based on their semantic content, using a network of scalable ontologies to enable intelligent retrieval. The DREAM Demonstrator has been evaluated as deployed in the film post-production phase to support the process of storage, indexing and retrieval of large data sets of special effects video clips as an exemplar application domain. This paper provides its performance and usability results and highlights the scope for future enhancements of the DREAM architecture which has proven successful in its first and possibly most challenging proving ground, namely film production, where it is already in routine use within our test bed Partners' creative processes. (C) 2009 Published by Elsevier B.V.
Resumo:
Cell cycle regulatory molecules are implicated in cardiomyocyte hypertrophy. We have investigated protein expression of cyclins A, D1–3, and E and cyclin-dependent kinases (CDKs) 2, 4, 5, and 6 in left ventricular (LV) tissues during the development of LV hypertrophy in rats following aortic constriction (AC). Compared with their expression in sham-operated controls (SH), expression of cyclins D2 and D3 and of CDK4 and CDK6 increased significantly fromday 3 to day 21 after AC concomitant with increased LV mass. However, no significant difference was observed for CDK2 or CDK5. Cyclins A, D1, and E were undetectable. In vitro kinase activities of CDK4 and CDK6 increased ∼70% from day 7 to day 14 in AC myocytes compared with SH myocytes (P< 0.03). Fluorescence-activated cell sorter analysis revealed a G0/G1to G2/M phase progression in AC myocyte nuclei (22.0 ± 1.1% in G2/M) by day 7 postoperation compared with progression in SH myocyte nuclei (14.0 ± 0.8% in G2/M;P < 0.01). Thus an upregulation of certain cell cycle regulators is associated with cardiomyocyte hypertrophy.
Resumo:
The phase diagram for an AB diblock copolymer melt with polydisperse A blocks and monodisperse B blocks is evaluated using lattice-based Monte Carlo simulations. Experiments on this system have shown that the A-block polydispersity shifts the order-order transitions (OOTs) towards higher A-monomer content, while the order-disorder transition (ODT) moves towards higher temperatures when the A blocks form the minority domains and lower temperatures when the A blocks form the matrix. Although self-consistent field theory (SCFT) correctly accounts for the change in the OOTs, it incorrectly predicts the ODT to shift towards higher temperatures at all diblock copolymer compositions. In contrast, our simulations predict the correct shifts for both the OOTs and the ODT. This implies that polydispersity amplifies the fluctuation-induced correction to the mean-field ODT, which we attribute to a reduction in packing frustration. Consistent with this explanation, polydispersity is found to enhance the stability of the perforated-lamellar phase.
Resumo:
The African Technology Policy Studies Network (ATPS) is a multidisciplinary network of researchers, private sector actors, policymakers and civil society. ATPS has the vision to become the leading international centre of excellence and reference in science, technology and innovation (STI) systems research, training and capacity building, communication and sensitization, knowledge brokerage, policy advocacy and outreach in Africa. It has a Regional Secretariat in Nairobi Kenya, and operates through national chapters in 29 countries (including 27 in Africa and two Chapters in the United Kingdom and USA for Africans in the Diaspora) with an expansion plan to cover the entire continent by 2015. The ATPS Phase VI Strategic Plan aims to improve the understanding and functioning of STI processes and systems to strengthen the learning capacity, social responses, and governance of STI for addressing Africa's development challenges, with a specific focus on the Millennium Development Goals (MDGs). A team of external evaluators carried out a midterm review to assess the effectiveness and efficiency of the implementation of the Strategic Plan for the period January 1, 2009 to December 31, 2010. The evaluation methodology involved multiple quantitative and qualitative methods to assess the qualitative and quantitative inputs (human resources, financial resources, time, etc.) into ATPS activities (both thematic and facilitative) and their tangible and intangible outputs, outcomes and impacts. Methods included a questionnaire survey of ATPS members and stakeholders, key informant interviews, and focus group discussions (FGDs) with members in six countries. Effectiveness of Programmes Under all six strategic goals, very good progress has been made towards planned outputs and outcomes. This is evidenced by key performance indicators (KPIs) generated from desk review, ratings from the survey respondents, and the themes that run through the FGDs. Institutional and Programme Cost Effectiveness Institutional Effectiveness: assessment of institutional effectiveness suggests that adequate management frameworks are in place and are being used effectively and transparently. Also technical and financial accounting mechanisms are being followed in accordance with grant agreements and with global good practice. This is evidenced by KPIs generated from desk review. Programme Cost Effectiveness: assessment of cost-effectiveness of execution of programmes shows that organisational structure is efficient, delivering high quality, relevant research at relatively low cost by international standards. The evidence includes KPIs from desk review: administrative costs to programme cost ratio has fallen steadily, to around 10%; average size of research grants is modest, without compromising quality. There is high level of pro bono input by ATPS members. ATPS Programmes Strategic Evaluation ATPS research and STI related activities are indeed unique and well aligned with STI issues and needs facing Africa and globally. The multi-disciplinary and trans-boundary nature of the research activities are creating a unique group of research scientists. The ATPS approach to research and STI issues is paving the way for the so called Third Generation University (3GU). Understanding this unique positioning, an increasing number of international multilateral agencies are seeking partnership with ATPS. ATPS is seeing an increasing level of funding commitments by Donor Partners. Recommendations for ATPS Continued Growth and Effectiveness On-going reform of ATPS administrative structure to continue The on-going reforms that have taken place within the Board, Regional Secretariat, and at the National Chapter coordination levels are welcomed. Such reform should continue until fully functional corporate governance policy and practices are fully established and implemented across the ATPS governance structures. This will further strengthen ATPS to achieve the vision of being the leading STI policy brokerage organization in Africa. Although training in corporate governance has been carried out for all sectors of ATPS leadership structure in recent time, there is some evidence that these systems have not yet been fully implemented effectively within all the governance structures of the organization, especially at the Board and National chapter levels. Future training should emphasize practical application with exercises relevant to ATPS leadership structure from the Board to the National Chapter levels. Training on Transformational Leadership - Leading a Change Though a subject of intense debate amongst economists and social scientists, it is generally agreed that cultural mindsets and attitudes could enhance and/or hinder organizational progress. ATPS’s vision demands transformational leadership skills amongst its leaders from the Board members to the National Chapter Coordinators. To lead such a change, ATPS leaders must understand and avoid personal and cultural mindsets and value systems that hinder change, while embracing those that enhance it. It requires deliberate assessment of cultural, behavioural patterns that could hinder progress and the willingness to be recast into cultural and personal habits that make for progress. Improvement of relationship amongst the Board, Secretariat, and National Chapters A large number of ATPS members and stakeholders feel they do not have effective communications and/or access to Board, National Chapter Coordinators and Regional Secretariat activities. Effort should be made to improve the implementation of ATPS communication strategy to improve on information flows amongst the ATPS management and the members. The results of the survey and the FGDs suggest that progress has been made during the past two years in this direction, but more could be done to ensure effective flow of pertinent information to members following ATPS communications channels. Strategies for Increased Funding for National Chapters There is a big gap between the fundraising skills of the Regional Secretariat and those of the National Coordinators. In some cases, funds successfully raised by the Secretariat and disbursed to national chapters were not followed up with timely progress and financial reports by some national chapters. Adequate training in relevant skills required for effective interactions with STI key policy players should be conducted regularly for National Chapter coordinators and ATPS members. The ongoing training in grant writing should continue and be made continent-wide if funding permits. Funding of National Chapters should be strategic such that capacity in a specific area of research is built which, with time, will not only lead to a strong research capacity in that area, but also strengthen academic programmes. For example, a strong climate change programme is emerging at University of Nigeria Nsukka (UNN), with strong collaborations with Universities from neighbouring States. Strategies to Increase National Government buy-in and support for STI Translating STI research outcomes into policies requires a great deal of emotional intelligence, skills which are often lacking in the first and second generation universities. In the epoch of the science-based or 2GUs, governments were content with universities carrying out scientific research and providing scientific education. Now they desire to see universities as incubators of new science- or technology-based commercial activities, whether by existing firms or start-ups. Hence, governments demand that universities take an active and leading role in the exploitation of their knowledge and they are willing to make funds available to support such activities. Thus, for universities to gain the attention of national leadership they must become centres of excellence and explicit instruments of economic development in the knowledge-based economy. The universities must do this while working collaboratively with government departments, parastatals, and institutions and dedicated research establishments. ATPS should anticipate these shifting changes and devise programmes to assist both government and universities to relate effectively. New administrative structures in member organizations to sustain and manage the emerging STI multidisciplinary teams Second Generation universities (2GUs) tend to focus on pure science and often do not regard the application of their know-how as their task. In contrast, Third Generation Universities (3GUs) objectively stimulate techno-starters – students or academics – to pursue the exploitation or commercialisation of the knowledge they generate. They view this as being equal in importance to the objectives of scientific research and education. Administratively, research in the 2GU era was mainly monodisciplinary and departments were structured along disciplines. The emerging interdisciplinary scientific teams with focus on specific research areas functionally work against the current mono-disciplinary faculty-based, administrative structure of 2GUs. For interdisciplinary teams, the current faculty system is an obstacle. There is a need for new organisational forms for university management that can create responsibilities for the task of know-how exploitation. ATPS must anticipate this and begin to strategize solutions for their member institutions to transition to 3Gus administrative structure, otherwise ATPS growth will plateau, and progress achieved so far may be stunted.