Exploring the use of pharmaceutical patient assistance programs as an option to improve access to and affordability of prescription drugs

Background. Pharmaceutical-sponsored patient assistance programs (PAPs) are charity programs that provide free or reduced-priced medications to eligible patients. PAPs have the potential to improve prescription drug accessibility for patients but currently there is limited information about their use and effectiveness. ^ Objectives and methods. This dissertation described the use of PAPs in the U.S. through the conduct of two studies: (1) a systematic review of primary studies of PAPs from commercially-published and “grey” literature sources; and (2) a retrospective, cross-sectional study of cancer patients' use of PAPs at a tertiary care cancer outpatient center. ^ Results. (1) The systematic review identified 33 studies: 15 evaluated the impact of PAP enrollment assistance programs on patient healthcare outcomes; 7 assessed institutional costs of providing enrollment assistance; 7 surveyed stakeholders; 4 examined other aspects. Standardized mean differences calculated for disease indicator outcomes (most of which were single group, pre-posttest designs) showed significant decreases in glycemic and lipid control, and inconsistent results for blood pressure. Grey literature abstracts reported insufficient statistics for calculations. Study heterogeneity made weighted summary estimates inappropriate. Economic analyses indicated positive financial benefits to institutions providing enrollment assistance (cost) compared to the wholesale value of the medications provided (benefit); analyses did not value health outcomes. Mean quality of reporting scores were higher for observational studies in commercially-published articles versus full text, grey literature reports. (2) The cross-sectional study found that PAP outpatients were significantly more likely to be uninsured, indigent, and < 65 years old than non-PAP patients. Nearly all non-PAP and PAP prescriptions were for non-cancer conditions, either for co-morbidities (e.g., hypertension) or the management of treatment side effects (e.g., pain). Oral chemotherapies from PAPs were significantly more likely to be for breast versus other cancers, and be a newer, targeted versus traditional chemotherapy.^ Conclusions. In outpatient settings, PAP enrollment assistance plus additional medication services (e.g., counseling, reminders, and free samples) is associated with improved disease indicators for patients. Healthcare institutions, including cancer centers, can offset financial losses from uncompensated drug costs and recoup costs invested in enrollment assistance programs by procuring free PAP medications. Cancer patients who are indigent and uninsured may be able to access more outpatient medications for their supportive care needs through PAPs, than for cancer treatment options like oral chemotherapies. Because of the selective availability of drugs through PAPs, there may be more options for newer, oral, targeted chemotherapies for the treatment breast cancer versus other for other cancers.^

Future pandemic influenza control (FPIC) related strategic management plan based on the 2009 H1N1 pandemic influenza review of health policy decisions, their practice and implications

This cross-sectional study is based on the qualitative and quantitative research design to review health policy decisions, their practice and implications during 2009 H1N1 influenza pandemic in the United States and globally. The “Future Pandemic Influenza Control (FPIC) related Strategic Management Plan” was developed based on the incorporation of the “National Strategy for Pandemic Influenza (2005)” for the United States from the U.S. Homeland Security Council and “The Canadian Pandemic Influenza Plan for the Health Sector (2006)” from the Canadian Pandemic Influenza Committee for use by the public health agencies in the United States as well as globally. The “global influenza experts’ survey” was primarily designed and administered via email through the “Survey Monkey” system to the 2009 H1N1 influenza pandemic experts as the study respondents. The effectiveness of this plan was confirmed and the approach of the study questionnaire was validated to be convenient and the excellent quality of the questions provided an efficient opportunity to the study respondents to evaluate the effectiveness of predefined strategies/interventions for future pandemic influenza control.^ The quantitative analysis of the responses to the Likert-scale based questions in the survey about predefined strategies/interventions, addressing five strategic issues to control future pandemic influenza. The effectiveness of strategies defined as pertinent interventions in this plan was evaluated by targeting five strategic issues regarding pandemic influenza control. For the first strategic issue pertaining influenza prevention and pre pandemic planning; the confirmed effectiveness (agreement) for strategy (1a) 87.5%, strategy (1b) 91.7% and strategy (1c) 83.3%. The assessment of the priority level for strategies to address the strategic issue no. (1); (1b (High Priority) > 1a (Medium Priority) > 1c (Low Priority) based on the available resources of the developing and developed countries. For the second Strategic Issue encompassing the preparedness and communication regarding pandemic influenza control; the confirmed effectiveness (agreement) for the strategy (2a) 95.6%, strategy (2b) 82.6%, strategy (2c) 91.3% and Strategy (2d) 87.0%. The assessment of the priority level for these strategies to address the strategic issue no. (2); (2a (highest priority) > 2c (high priority) >2d (medium priority) > 2b (low priority). For the third strategic issue encompassing the surveillance and detection of pandemic influenza; the confirmed effectiveness (agreement) for the strategy (3a) 90.9% and strategy (3b) 77.3%. The assessment of the priority level for theses strategies to address the strategic Issue No. (3) (3a (high priority) > 3b (medium/low priority). For the fourth strategic issue pertaining the response and containment of pandemic influenza; the confirmed effectiveness (agreement) for the strategy (4a) 63.6%, strategy (4b) 81.8%, strategy (4c) 86.3%, and strategy (4d) 86.4%. The assessment of the priority level for these strategies to address the strategic issue no. (4); (4d (highest priority) > 4c (high priority) > 4b (medium priority) > 4a (low priority). The fifth strategic issue about recovery from influenza and post pandemic planning; the confirmed effectiveness (agreement) for the strategy (5a) 68.2%, strategy (5b) 36.3% and strategy (5c) 40.9%. The assessment of the priority level for strategies to address the strategic issue no. (5); (5a (high priority) > 5c (medium priority) > 5b (low priority).^ The qualitative analysis of responses to the open-ended questions in the study questionnaire was performed by means of thematic content analysis. The following recurrent or common “themes” were determined for the future implementation of various predefined strategies to address five strategic issues from the “FPIC related Strategic Management Plan” to control future influenza pandemics. (1) Pre Pandemic Influenza Prevention, (2) Seasonal Influenza Control, (3) Cost Effectiveness of Non Pharmaceutical Interventions (NPI), (4) Raising Global Public Awareness, (5) Global Influenza Vaccination Campaigns, (6)Priority for High Risk Population, (7) Prompt Accessibility and Distribution of Influenza Vaccines and Antiviral Drugs, (8) The Vital Role of Private Sector, (9) School Based Influenza Containment, (10) Efficient Global Risk Communication, (11) Global Research Collaboration, (12) The Critical Role of Global Public Health Organizations, (13) Global Syndromic Surveillance and Surge Capacity and (14) Post Pandemic Recovery and Lessons Learned. The future implementation of these strategies with confirmed effectiveness to primarily “reduce the overall response time’ in the process of ‘early detection’, ‘strategies (interventions) formulation’ and their ‘implementation’ to eventually ensure the following health outcomes: (a) reduced influenza transmission, (b) prompt and effective influenza treatment and control, (c) reduced influenza related morbidity and mortality.^

Pharmaceutical industry : hazardous waste generation, treatment, and disposal.

Final report (SW-508) describing work performed for the Federal Solid waste management program under Contract no. 68-01-2684.

Does pharmacogenomics provide an ethical challenge to the utilisation of cost-effectiveness analysis by public health systems?

Pharmacogenomics promotes an understanding of the genetic basis for differences in efficacy or toxicity of drugs in different individuals. Implementation of the outcomes of pharmacogenomic research into clinical practice presents a number of difficulties for healthcare. This paper aims to highlight one of the Unique ethical challenges which pharmacogenomics presents for the utilisation of cost-effectiveness analysis by public health systems. This paper contends that pharmacogenomics provides a challenge to fundamental principles which underlie most systems for deciding which drugs should be publicly subsidised. Pharmacogenomics brings into focus the conflict between equality and utility in the context of using cost-effectiveness analysis to aid distribution of a limited national drug budget.

Molecular architecture influences on material properties of pharmaceutical compounds

Salt formation has extensively been studied as a strategy to improve drug solubility but it has not been explored as a strategy to improve mechanical properties. A better understanding of which factors of the solid state can have an influence in the mechanical properties of pharmaceutical powders can help to optimise and reduce cost of tablet manufacturing. The aim of this study was to form different series of amine salts of flurbiprofen, gemfibrozil and diclofenac and to establish predictive relationships between architectural characteristics and physicochemical and mechanical properties of the salts. For this purpose, three different carboxylic acid drugs were selected: flurbiprofen, gemfibrozil and diclofenac, similar in size but varying in flexibility and shape and three different series of counterions were also chosen: one with increasing bulk and no hydroxyl groups to limit the hydrogen bonding potential; a second one with increasing number of hydroxyl groups and finally a third series, related to the latter in number of hydroxyl groups but with different molecular shape and flexibility. Physico-chemical characterization was performed (DSC, TGA, solubility, intrinsic dissolution rate, particle size, true density) and mechanical properties measured using a compaction replicator. Strained molecular conformations produce weaker compacts as they have higher energy than preferred conformations that usually lie close to energy minimums and oppose plastic deformation. It was observed that slip planes, which correspond to regions of weakest interaction between the planes, were associated with improved plasticity and stronger compacts. Apart from hydrogen bonds, profuse van der Waals forces can result in ineffective slip planes. Salts displaying two-dimensional densely hydrogen bonded layers produced stronger compacts than salts showing one-dimensional networks of non-bonded columns, probably by reducing the attachment energy between layers. When hydrogen bonds are created intramolecularly, it is possible that the mechanical properties are compromised as they do not contribute so much to create twodimensional densely bonded layers and they can force molecules into strained conformations. Some types of hydrogen bonding network may be associated with improved mechanical properties, such as type II, or R (10) 3 4 using graph-set notation, versus type III, or R (12) 4 8 , columns. This work clearly demonstrates the potential of investigating crystal structure-mechanical property relationship in pharmaceutical materials.

Pharmaceutical process optimisation of bulk lyophilisates:implications of powder handling

Lyophilisation or freeze drying is the preferred dehydrating method for pharmaceuticals liable to thermal degradation. Most biologics are unstable in aqueous solution and may use freeze drying to prolong their shelf life. Lyophilisation is however expensive and has seen lots of work aimed at reducing cost. This thesis is motivated by the potential cost savings foreseen with the adoption of a cost efficient bulk drying approach for large and small molecules. Initial studies identified ideal formulations that adapted well to bulk drying and further powder handling requirements downstream in production. Low cost techniques were used to disrupt large dried cakes into powder while the effects of carrier agent concentration were investigated for powder flowability using standard pharmacopoeia methods. This revealed superiority of crystalline mannitol over amorphous sucrose matrices and established that the cohesive and very poor flow nature of freeze dried powders were potential barriers to success. Studies from powder characterisation showed increased powder densification was mainly responsible for significant improvements in flow behaviour and an initial bulking agent concentration of 10-15 %w/v was recommended. Further optimisation studies evaluated the effects of freezing rates and thermal treatment on powder flow behaviour. Slow cooling (0.2 °C/min) with a -25°C annealing hold (2hrs) provided adequate mechanical strength and densification at 0.5-1 M mannitol concentrations. Stable bulk powders require powder transfer into either final vials or intermediate storage closures. The targeted dosing of powder formulations using volumetric and gravimetric powder dispensing systems where evaluated using Immunoglobulin G (IgG), Lactate Dehydrogenase (LDH) and Beta Galactosidase models. Final protein content uniformity in dosed vials was assessed using activity and protein recovery assays to draw conclusions from deviations and pharmacopeia acceptance values. A correlation between very poor flowability (p<0.05), solute concentration, dosing time and accuracy was revealed. LDH and IgG lyophilised in 0.5 M and 1 M mannitol passed Pharmacopeia acceptance values criteria with 0.1-4 while formulations with micro collapse showed the best dose accuracy (0.32-0.4% deviation). Bulk mannitol content above 0.5 M provided no additional benefits to dosing accuracy or content uniformity of dosed units. This study identified considerations which included the type of protein, annealing, cake disruption process, physical form of the phases present, humidity control and recommended gravimetric transfer as optimal for dispensing powder. Dosing lyophilised powders from bulk was demonstrated as practical, time efficient, economical and met regulatory requirements in cases. Finally the use of a new non-destructive technique, X-ray microcomputer tomography (MCT), was explored for cake and particle characterisation. Studies demonstrated good correlation with traditional gas porosimetry (R2 = 0.93) and morphology studies using microscopy. Flow characterisation from sample sizes of less than 1 mL was demonstrated using three dimensional X-ray quantitative image analyses. A platinum-mannitol dispersion model used revealed a relationship between freezing rate, ice nucleation sites and variations in homogeneity within the top to bottom segments of a formulation.

Short cycle times for cost-efficient processing in lyophilized formulations

Pharmaceutical scientists who bulk freeze dry need to foremost identify what quality factors are of a priority during cycle development since the economics of freeze-drying do not allow for both the cost-efficient production and the ability to obtain the highest quality score across all quality factors. Consider; morphology, activity, dissolution, long-term storage, packaging and cost.

Essays on Competition in the Pharmaceutical Industry

Chapter 1: Patents and Entry Competition in the Pharmaceutical Industry: The Role of Marketing Exclusivity Effective patent length for innovation drugs is severely curtailed because of extensive efficacy and safety tests required for FDA approval, raising concern over adequacy of incentives for new drug development. The Hatch-Waxman Act extends patent length for new drugs by five years, but also promotes generic entry by simplifying approval procedures and granting 180-day marketing exclusivity to a first generic entrant before the patent expires. In this paper we present a dynamic model to examine the effect of marketing exclusivity. We find that marketing exclusivity may be redundant and its removal may increase generic firms' profits and social welfare. Chapter 2: Why Authorized Generics?: Theoretical and Empirical Investigations Facing generic competition, the brand-name companies some-times launch generic versions themselves called authorized generics. This practice is puzzling. If it is cannibalization, it cannot be profitable. If it is divisionalization, it should be practiced always instead of sometimes. I explain this phenomenon in terms of switching costs in a model in which the incumbent first develops a customer base to ready itself against generic competition later. I show that only sufficiently low switching costs or large market size justifies launch of AGs. I then use prescription drug data to test those results and find support. Chapter 3: The Merger Paradox and R&D Oligopoly theory says that merger is unprofitable, unless a majority of firms in industry merge. Here, we introduce R&D opportunities to resolve this so-called merger paradox. We have three results. First, when there is one R&D firm, that firm can profitably merge with any number of non-R&D firms. Second, with multiple R&D firms and multiple non-R&D firms, all R&D firms can profitably merge. Third, with two R&D firms and two non-R&D firms, each R&D firms prefer to merge with a non-R&D firm. With three or more than non-R&D firms, however, the R&D firms prefer to merge with each other.

Innovation in the pharmaceutical industry: New estimates of R&D costs.

The research and development costs of 106 randomly selected new drugs were obtained from a survey of 10 pharmaceutical firms. These data were used to estimate the average pre-tax cost of new drug and biologics development. The costs of compounds abandoned during testing were linked to the costs of compounds that obtained marketing approval. The estimated average out-of-pocket cost per approved new compound is $1395 million (2013 dollars). Capitalizing out-of-pocket costs to the point of marketing approval at a real discount rate of 10.5% yields a total pre-approval cost estimate of $2558 million (2013 dollars). When compared to the results of the previous study in this series, total capitalized costs were shown to have increased at an annual rate of 8.5% above general price inflation. Adding an estimate of post-approval R&D costs increases the cost estimate to $2870 million (2013 dollars).

Moderating effects of contextual factors on relationship between pharmaceutical marketing strategies and physician prescription decision: A review

Decision–making by physicians on patients’ treatment has received increased research attention. Research on the effect of marketing strategies on prescription behaviour has tended to generate controversial results. While some researchers reported a strong influence, some found only moderate effects, while others find no influence at all. The main objective of this paper is to review the influence of the marketing strategies by pharmaceutical firms and contextual factors on physician attitude to drug prescription. The paper presents comprehensive information on pharmaceutical marketing efforts through exhaustive review of relevant literature, and identifies the moderating effects of contextual factors on physician prescribing decisions. It also presents a crucial conceptual model for explaining the theoretical linkages between marketing strategies of pharmaceutical firms, contextual factors and the decision of the physician regarding drug prescription.

Computer vision in aseptic pharmaceutical manufacturing: a deep learning-based approach to vial inspection and pack formation during a lyophilizer loading cycle

Vision systems are powerful tools playing an increasingly important role in modern industry, to detect errors and maintain product standards. With the enlarged availability of affordable industrial cameras, computer vision algorithms have been increasingly applied in industrial manufacturing processes monitoring. Until a few years ago, industrial computer vision applications relied only on ad-hoc algorithms designed for the specific object and acquisition setup being monitored, with a strong focus on co-designing the acquisition and processing pipeline. Deep learning has overcome these limits providing greater flexibility and faster re-configuration. In this work, the process to be inspected consists in vials’ pack formation entering a freeze-dryer, which is a common scenario in pharmaceutical active ingredient packaging lines. To ensure that the machine produces proper packs, a vision system is installed at the entrance of the freeze-dryer to detect eventual anomalies with execution times compatible with the production specifications. Other constraints come from sterility and safety standards required in pharmaceutical manufacturing. This work presents an overview about the production line, with particular focus on the vision system designed, and about all trials conducted to obtain the final performance. Transfer learning, alleviating the requirement for a large number of training data, combined with data augmentation methods, consisting in the generation of synthetic images, were used to effectively increase the performances while reducing the cost of data acquisition and annotation. The proposed vision algorithm is composed by two main subtasks, designed respectively to vials counting and discrepancy detection. The first one was trained on more than 23k vials (about 300 images) and tested on 5k more (about 75 images), whereas 60 training images and 52 testing images were used for the second one.

A Highly Improved Method For Sensitive Determination Of Amitriptyline In Pharmaceutical Formulations Using An Unmodified Carbon Nanotube Electrode In The Presence Of Sulfuric Acid.

The present paper describes a novel, simple and reliable differential pulse voltammetric method for determining amitriptyline (AMT) in pharmaceutical formulations. It has been described for many authors that this antidepressant is electrochemically inactive at carbon electrodes. However, the procedure proposed herein consisted in electrochemically oxidizing AMT at an unmodified carbon nanotube paste electrode in the presence of 0.1 mol L(-1) sulfuric acid used as electrolyte. At such concentration, the acid facilitated the AMT electroxidation through one-electron transfer at 1.33 V vs. Ag/AgCl, as observed by the augmentation of peak current. Concerning optimized conditions (modulation time 5 ms, scan rate 90 mV s(-1), and pulse amplitude 120 mV) a linear calibration curve was constructed in the range of 0.0-30.0 μmol L(-1), with a correlation coefficient of 0.9991 and a limit of detection of 1.61 μmol L(-1). The procedure was successfully validated for intra- and inter-day precision and accuracy. Moreover, its feasibility was assessed through analysis of commercial pharmaceutical formulations and it has been compared to the UV-vis spectrophotometric method used as standard analytical technique recommended by the Brazilian Pharmacopoeia.

Use Of Experimental Design To Optimize A Triple-potential Waveform To Develop A Method For The Determination Of Streptomycin And Dihydrostreptomycin In Pharmaceutical Veterinary Dosage Forms By Hplc-pad.

An HPLC-PAD method using a gold working electrode and a triple-potential waveform was developed for the simultaneous determination of streptomycin and dihydrostreptomycin in veterinary drugs. Glucose was used as the internal standard, and the triple-potential waveform was optimized using a factorial and a central composite design. The optimum potentials were as follows: amperometric detection, E1=-0.15V; cleaning potential, E2=+0.85V; and reactivation of the electrode surface, E3=-0.65V. For the separation of the aminoglycosides and the internal standard of glucose, a CarboPac™ PA1 anion exchange column was used together with a mobile phase consisting of a 0.070 mol L(-1) sodium hydroxide solution in the isocratic elution mode with a flow rate of 0.8 mL min(-1). The method was validated and applied to the determination of streptomycin and dihydrostreptomycin in veterinary formulations (injection, suspension and ointment) without any previous sample pretreatment, except for the ointments, for which a liquid-liquid extraction was required before HPLC-PAD analysis. The method showed adequate selectivity, with an accuracy of 98-107% and a precision of less than 3.9%.

Molecularly Imprinted Solid Phase Extraction Of Fluconazole From Pharmaceutical Formulations.

This work encompasses a direct and coherent strategy to synthesise a molecularly imprinted polymer (MIP) capable of extracting fluconazole from its sample. The MIP was successfully prepared from methacrylic acid (functional monomer), ethyleneglycoldimethacrylate (crosslinker) and acetonitrile (porogenic solvent) in the presence of fluconazole as the template molecule through a non-covalent approach. The non-imprinted polymer (NIP) was prepared following the same synthetic scheme, but in the absence of the template. The data obtained from scanning electronic microscopy, infrared spectroscopy, thermogravimetric and nitrogen Brunauer-Emmett-Teller plot helped to elucidate the structural as well as the morphological characteristics of the MIP and NIP. The application of MIP as a sorbent was demonstrated by packing it in solid phase extraction cartridges to extract fluconazole from commercial capsule samples through an offline analytical procedure. The quantification of fluconazole was accomplished through UPLC-MS, which resulted in LOD≤1.63×10(-10) mM. Furthermore, a high percentage recovery of 91±10% (n=9) was obtained. The ability of the MIP for selective recognition of fluconazole was evaluated by comparison with the structural analogues, miconazole, tioconazole and secnidazole, resulting in percentage recoveries of 51, 35 and 32%, respectively.