Dentine caries inhibition through CO(2) laser (10.6 mu m) irradiation and fluoride application, in vitro

Objective: The purpose of the study was to investigate whether dentine irradiation with a pulsed CO(2) laser (10.6 mu m) emitting pulses of 10 ms is capable of reducing dentine calcium and phosphorus losses in an artificial caries model. Design: The 90 dentine slabs obtained from bovine teeth were randomly divided into six groups (n = 15): negative control group (GC); positive control group, treated with fluoride 1.23% (GF); and laser groups irradiated with 8 J/cm(2) (L8); irradiated as in L8 + fluoride 1.23% (L8F); irradiated with 11j/cm(2) (L11); irradiated as in L11 + fluoride 1.23% (L11F). After laser irradiation the samples were submitted to a pH-cycling model for 9 days. The calcium and phosphorous contents in the de- and remineralization solutions were measured by means of inductively coupled plasma optical emission spectrometer - ICP-OES. Additionally intra-pulpal temperature measurements were performed. The obtained data were analysed by means of ANOVA and Tukey`s test (alpha = 0.05). Results: In the demineralization solutions the groups L11F and GF presented significantly lower means of calcium and phosphorous losses than the control group; and in L11F means were significantly lower than in the fluoride group. Both irradiation parameters tested caused intrapulpal temperature increase below 2 degrees C. Conclusion: It can be concluded that under the conditions of this study, CO(2) laser irradiation (10.6 mu m) with 11J/cm(2) (540 mJ and 10 Hz) of fluoride treated dentine surfaces decreases the loss of calcium and phosphorous in the demineralization process and does not cause excessive temperature increase inside the pulp chamber. (C) 2010 Elsevier Ltd. All rights reserved.

Effect of supplementation of soft drinks with green tea extract on their erosive potential against dentine

Background: Matrix metalloproteinase (MMP) inhibitors reduce dentine erosion. This in vitro study evaluated the effect of the supplementation of soft drinks with green tea extract, a natural inhibitor of MMPs, on their erosive potential against dentine. Methods: For each drink tested (Coca-Cola (TM), Kuat (TM) guarana, Sprite (TM) and light Coca-Cola (TM)), 40 dentine specimens were divided into two subgroups differing with respect to supplementation with green tea extract at 1.2% (OM24 (R), 100% Camellia sinensis leaf extract, containing 30 +/- 3% of catechin; Omnimedica, Switzerland) or not (control). Specimens were subjected to four pH cycles, alternating de-and remineralization in one day. For each cycle, samples were immersed in pure or supplemented drink (10 minutes, 30 mL per block) and in artificial saliva (60 minutes, 30 mL per block) at 37 degrees C, under agitation. Dentine alterations were determined by profilometry (mu m). Data were analysed by two-way ANOVA and Bonferroni`s test (p < 0.05). Results: A significant difference was observed among the drinks tested with Sprite (TM) leading to the highest surface loss and light Coca-Cola (TM) to the lowest. Supplementation with green tea extract reduced the surface loss by 15% to 40% but the difference was significant for Coca-Cola (TM) only. Conclusions: Supplementation of soft drinks with green tea extract might be a viable alternative to reduce their erosive potential against dentine.

Understanding the impact of divalent cation substitution on hydroxyapatite: An in vitro multiparametric study on biocompatibility

Hydroxyapatite (HA), a stable and biocompatible material for bone tissue therapy, may present a variable stoichiometry and accept a large number of cationic substitutions. Such substitutions may modify the chemical activity of HA surface, with possible impact on biocompatibility. In this work, we assessed the effects of calcium substitution with diverse divalent cations (Pb(2+), Sr(2+), Co(2+), Zn(2+), Fe(2+), Cu(2+), or Mg(2+)) on the biological behavior of HA. Physicochemical analyses revealed that apatite characteristics related to crystallinity and calcium dissolution/uptake rates are very sensitive to the nature of cationic substitution. Cytocompatibility was evaluated by mitochondrial activity, membrane integrity, cell density, proapoptotic potential, and adhesion tests. With the exception of Zn-HA, all the substituted HAs induced some level of apoptosis. The highest apoptosis levels were observed for Mg-HA and Co-HA. Cu-HA was the only material to impair simultaneously mitochondrial activity, membrane integrity, and cell density. The highest relative cell densities after exposure to the modified HAs were observed for Mg-HA and Zn-HA, while Co-HA significantly improved cell adhesion onto HA surface. These results show that changes on surface dissolution caused by cationic substitution, as well as the increase of metal species released to biological media, were the main responsible factors related to alterations on HA biocompatibility. (C) 2011 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 98A: 351-358, 2011.

Bone repair and augmentation using block of sintered bovine-derived anorganic bone graft in cranial bone defect model

To histomorphometrically investigate the repair of critical size defects (CSDs) and bone augmentation in cranial walls using block of sintered bovine-derived anorganic bone (sBDAB) graft. Forty guinea-pigs were divided into test (n=20) and CSD control (n=20) groups. In each animal, a full-thickness bone defect with 9.5 mm diameter was made in the frontal bone. The defects were filled with an sBDAB block soaked in blood in the test group and with blood clot in the CSD control group. The skulls were collected at 0 h (n=2) and 30, 90 and 180 days (n=6/group and period) postoperatively. The volume density and total volume of newly formed bone, sBDAB, blood vessels and connective tissue, vertical thickness of removed bone plug, sBDAB block and graft area were evaluated. The vertical thickness of the adapted sBDAB block was 3.8 times higher than that of the removed bone plug and did not show significant difference between periods, filling in average 29.8% of the total graft region. The sBDAB block exhibited complete osseointegration with the borders of the defect at 90 days. At 90 and 180 days, the vertical thickness of the graft was 279% in the average, and the total volume of bone augmentation was, respectively, 78.8% and 148.5% higher compared with the removed bone plug. The defects of the CDS control group showed limited osteogenesis and filling by connective tissue plus tegument. The sBDAB block can be used to promote repair of CSDs and bone augmentation in the craniomaxillofacial region, due to its good osteoconductive and slow resorptive properties. To cite this article:Cestari TM, Granjeiro JM, de Assis GF, Garlet GP, Taga R. Bone repair and augmentation using block of sintered bovine-derived anorganic bone graft in cranial bone defect model.Clin. Oral Impl. Res. 20, 2009; 340-350.doi: 10.1111/j.1600-0501.2008.01659.x.

In vivo Acid Etching Effect on Bacteria within Caries-Affected Dentin

Acid etching procedures may disrupt residual bacteria and contribute to the success of incomplete caries removal followed by adhesive restoration. This study evaluated the in vivo effect of acid etching on cariogenic bacterial activity within affected dentin after minimally invasive treatment of caries lesions. Twenty-eight carious permanent teeth received standardized selective caries removal and random acid etch treatment (E) or not (NE) prior to adhesive restoration. Baseline and 3-month dentin biopsies were collected. The number of bacteria and activity of total bacterial cells and Streptococcus mutans were determined by quantitative PCR and RT-PCR. No statistically significant differences were observed in total bacterial number and activity between E and NE treatments (p > 0.3008). For NE, however, the residual S. mutans bacterial cells were reduced (p = 0.0027), while the activity per cell was significantly increased (p = 0.0010) after reentry at 3 months after restoration. This effect was not observed in group E. Although no significant differences were found between groups, this study suggests that acid etching of affected dentin prior to adhesive restoration may directly or indirectly have an inhibitive effect on the activity of residual cariogenic bacteria. Further research is required to investigate this potential effect. Copyright (C) 2010 S. Karger AG, Basel

A comparative study of physicochemical properties of AH Plus, Epiphany, and Epiphany SE root canal sealers

P>Aim To assess the physicochemical properties and the surface morphology of AH Plus, Epiphany, and Epiphany SE root canal sealers. Methodology Five samples of each material were employed for each test according to ANSI/ADA specification 57. The samples were assigned to four groups: (i) AH Plus; (ii) Epiphany; (iii) Epiphany + Thinning Resin; (iv) Epiphany SE. The distilled water used during the solubility test was submitted to spectrometry to verify the release of calcium ions. The morphologies of the external surface and the cross-section of the samples were analysed by means of a scanning electron microscope (SEM). Statistical analysis was performed by using One-Way anova and post hoc Tukey-Kramer tests with the null hypothesis set as 5%. Results Setting time, flow and radiopacity results were in accordance with ANSI/ADA requirements whereas the dimensional change of all sealers and solubility of Epiphany did not fulfil ANSI/ADA protocols. AH Plus and Epiphany SE were similar in terms of flow, radiopacity, solubility and dimensional change. The spectrometry test revealed significant calcium ion release from Epiphany with and without the thinning resin. SEM analysis revealed essentially a homogeneous surface with compact layer and some rough areas. Conclusions Setting time, flow, and radiopacity tests conformed to ANSI/ADA standardization. The dimensional change in all groups and the solubility of Epiphany were greater than values considered acceptable, with higher amounts of calcium ion release. Epiphany SE revealed more organized, compacted, and homogeneous polymers in a reduced resin matrix when compared with the other groups.

Comparisons between bone and cementum compositions and the possible basis for their layered appearances

In humans, age estimation from the adult skeleton represents an attempt to determine chronological age based on growth and maturational events. In teeth, such events can be characterized by appositional growth layers in midroot cementum. The purpose of this study was to determine the underlying cause of the layered microstructure of human midroot cementum. Whether cementum growth layers are caused by changes in relative mineralization, collagen packing and/or orientation, or by variations in organic matrix apposition was investigated by subjecting midroot sections of human canine teeth to analysis using polarized light and scanning electron microscopy (SEM). Polarized light was used to examine transverse midroot sections in both mineralized and demineralized states. Mineralized sections were also reexamined following subsequent decollagenization. Polarized light was additionally used in the examination of mineralized sections taken transversely, longitudinally, and obliquely from the same tooth root. From the birefringence patterns it was concluded that collagen orientation does not change with varying section plane. Instead, the mineral phase was most responsible for the birefringence of the cementum. SEM studies suggested that neither collagen packing nor collagen orientation change across the width of the cementum, confirming and validating the results of the polarized light examination. Also, SEM analysis using electron backscatter and the electron probe suggested no changes in the mean atomic number density, calcium, phosphate, and sulfur levels across the width of the cementum. Therefore, we conclude that crystalline orientation and/or size is responsible for the layered appearance of cementum. (Bone 30:386-392; 2002) (C) 2002 by Elsevier Science Inc. All rights reserved.

Application of quantitative analytical electron microscopy to the mineral content of insect cuticle

Quantification of calcium in the cuticle of the fly larva Exeretonevra angustifrons was undertaken at the micron scale using wavelength dispersive X-ray microanalysis, analytical standards, and a full matrix correction. Calcium and phosphorus were found to be present in the exoskeleton in a ratio that indicates amorphous calcium phosphate. This was confirmed through electron diffraction of the calcium-containing tissue. Due to the pragmatic difficulties of measuring light elements, it is not uncommon in the field of entomology to neglect the use of matrix corrections when performing microanalysis of bulk insect specimens. To determine, firstly, whether such a strategy affects the outcome and secondly, which matrix correction is preferable, phi-rho (z) and ZAF matrix corrections were contrasted with each other and without matrix correction. The best estimate of the mineral phase was found to be given by using the phi-rho (z) correction. When no correction was made, the ratio of Ca to P fell outside the range for amorphous calcium phosphate, possibly leading to flawed interpretation of the mineral form when used on its own.

Mineral uptake in tobacco leaf discs during different developmental stages of shoot organogenesis

Relationships between mineral uptake and tobacco shoot organogenesis were investigated during three morphogenic phases: phase 1, days 0-10, pre-meristem formation; phase 2, days 10-20, meristem initiation and formation; and phase 3, days 20-35, growth and differentiation of induced meristems into leafy shoots. The mineral content of both shoot-forming (SF) and non-shoot-forming (NSF) media was examined over the 35-day culture period. Both SF and NSF explants rapidly consumed iron during phase 1. Nitrate uptake in SF explants was high and independent of explant growth during phases 1 and 2, but greatest and strongly correlated with growth during phase 3. Phosphorus uptake was highest in SF explants during phases 2 and 3, and correlated with explant growth. Uptake of potassium, calcium and sulphur was strongly associated with explant growth during phase 3 whereas magnesium uptake was only poorly correlated with growth. Results from this study indicate that particular minerals may have an important role in regulating development as well as generally supporting growth.

A regulação endócrina dos balanços de cálcio

RESUMO: As concentrações circulantes de cálcio são notavelmente constantes a despeito das variações diárias na absorção intestinal e na eliminação renal deste elemento. A regulação da calcémia é um sistema complexo que compreende vários factores controladores (a calcémia, a fosforémia, as concentrações circulantes de paratormona (PTH) e calcitriol além de muitos outros factores como hormonas esteróides em geral, outros iões como o magnésio e outros factores hormonais) e vários órgãos alvo (glândulas paratiroideias, osso, rim e intestino). As respostas dos órgãos alvo também são muito variadas. No caso mais simples, a cristalização de sais de cálcio corresponde a uma mudança de fase em que participam moléculas orgânicas que a iniciam, aceleram ou inibem. Em geral a combinação de um factor controlador com o respectivo receptor de membrana (para polipeptídeos ou iões) ou intracelular (hormonas esteróides) é apenas o primeiro passo de uma cadeia bioquímica que introduz uma enorme amplificação na resposta. A esta variedade de mecanismos de resposta correspondem grandes diferenças nos tempos de resposta que podem ser de minutos a semanas. É hoje possível “observar” (medir) com apreciável rigor nos líquidos biológicos (sangue, urina, fezes, etc.) os factores mais importantes do sistema de regulação da calcémia (cálcio, fósforo, paratormona e calcitriol) assim como administrar estes factores em experiências agudas. Esta possibilidade reflecte – se na literatura neste campo que tem vindo a crescer. O advento das técnicas da biologia molecular tem permitido a caracterização molecular de algumas das disfunções da homeostase do cálcio e é de esperar um diagnóstico fisiopatológico cada vez mais rigoroso dessas disfunções. Com o avanço dos conhecimentos nesta área que não cessa de aumentar temos cada vez maiores capacidades para fazer diagnósticos e é cada vez mais difícil interpretar com rigor os correspondentes quadros metabólicos. A análise ou síntese de sistemas complexos é a actividade mais nobre dos engenheiros que lhes permite desenhar pontes, diques, barcos, aviões ou automóveis. Com o aparecimento de computadores de médio ou grande porte foi – lhes possível utilizar descrições matemáticas não só para desenhar sistemas como ainda para interpretar eventuais falhas na sua operação. Essas descrições matemáticas consistem numa sequência de operações realizadas num computador segundo um “programa informático” que receberam a designação genérica de modelos, por analogia com as famosas leis (equações) da física que foram deduzidas a partir de um certo número de postulados e que permitem representar matematicamente processos físicos. As famosas leis de Newton são talvez os exemplos mais famosos de “modelos” de sistemas físicos. A introdução de modelos matemáticos em biologia e particularmente em medicina só se deu recentemente.MÉTODOS No trabalho que aqui se apresenta construiu - se um modelo simplificado da homeostase do cálcio destinado ao cálculo de variáveis observáveis (concentrações de cálcio, fósforo, PTH e calcitriol) de modo a poderem comparar-se valores calculados com valores observados. A escolha dos componentes do modelo foi determinada pela nossa experiência clínica e pela informação fisiopatológica e clínica publicada. Houve a preocupação de construir o modelo de forma modular de modo a ser possível a sua expansão sem grandes transformações na descrição matemática (e informática) já existente. Na sua fase actual o modelo não pode ser usado como instrumento de diagnóstico. É antes uma ferramenta destinada a esclarecer “em princípio” mecanismos fisiopatológicos. Usou – se o modelo para simular um certo número de observações publicadas e para exemplificar a sua eventual aplicação clínica na simulação de situações hipotéticas e na análise de possíveis mecanismos fisiopatológicos responsáveis por situações de hipo ou hipercalcémias. Simultaneamente fez – se uma análise dos dados acumulados relativos a doentes vistos no Serviço de Endocrinologia do Instituto Português de Oncologia de Francisco Gentil – Centro Regional Oncológico de Lisboa, S.A. CONCLUSÕES Numa população de 894 doentes com patologias variadas do Instituto Português de Oncologia de Lisboa os valores da calcémia tiveram uma distribuição normal unimodal com uma média de 9.56 mg/dl, e um erro padrão de 0.41 mg/dl. Estas observações sugerem que a calcémia está sujeita a regulação. A partir dos resultados publicados em que o metabolismo do cálcio foi perturbado por infusões de cálcio, calcitriol ou PTH, de estudos bioquímicos e fisiológicos sobre os mecanismos de acção de factores controladores da calcémia e do estudo do comportamento de órgãos alvo (paratiroideias, intestino, osso e rim) foi possível construir um modelo matemático de parâmetros concentrados do sistema de regulação da calcémia. As expressões analíticas usadas foram baseadas na cinética enzimática de modo a que os seus parâmetros tivessem um significado físico ou fisiológico simples. O modelo revelou apreciável robustez e flexibilidade. É estável quando não perturbado e transita entre estados estacionários quando perturbado. Na sua forma actual gera simulações que reproduzem satisfatoriamente um número apreciável de dados experimentais colhidos em doentes. Isto não significa que possa ser usado como instrumento de diagnóstico aplicável a doentes individuais. O desenho do modelo comporta a adição posterior de novas relações quando surgirem situações para as quais se revele insuficiente. A utilização exaustiva do modelo permitiu explicitar aspectos do metabolismo do cálcio que ou não estão contidas na sua formulação actual – o aparecimento de hipertrofia ou de adenomas das paratiroideias e as alterações na estrutura óssea , a participação de outros factores controladores – magnésio, ou estão insuficientemente descritas – alterações do metabolismo do fósforo nos hipoparatiroidismos. A análise dos dados relativos aos doentes do Serviço de Endocrinologia do IPO permitiu o início da caracterização dos tipos de patologia que representam e de possíveis mecanismos fisiopatológicos subjacentes. Estas observações são o ponto de partida para análises futuras. São exemplos das relações encontradas: a distribuição dos doentes por dois grandes grupos conforme a calcémia é determinada pelas concentrações circulantes de PTH ou estas são determinadas pela calcémia; a distribuição sazonal das concentrações de Vit. D25. no sangue; a correlação negativa entre estas e as concentrações de PTH no sangue. Também foi possível extrair a cinética do controlo da PTH sobre a síntese de calcitriol. O estudo dos níveis circulantes de PTH no pós-operatório imediato de doentes paratiroidectomizados permitiu determinar as suas taxas de degradação metabólica. O modelo permitiu simular as relações Ca/PTH no sangue, Ca/Fracção excretada da carga tubular, Ca/P no sangue para valores normais ou altos de Ca. Foram feitas simulações de situações fisiopatológicas (em “doentes virtuais”): infusões crónicas de cálcio, PTH e calcitriol; alterações no comportamento de receptores. Estas simulações correspondem a experiências que não podem ser realizadas em humanos. São exemplos da utilização do modelo na exploração de possíveis mecanismos fisiopatológicos através da observação de resultados quantitativos inacessíveis à intuição. O modelo foi útil em duas fases do trabalho: Primeiro, durante a sua síntese implicou uma escolha criticamente selectiva de informação, sua análise quantitativa e processamento, uma explicitação rigorosa (analítica) das relações funcionais entre os controladores e as variáveis e da sua integração numa estrutura global; Segundo, a simulação de situações experimentais ou clínicas (dados do Serviço de Endocrinologia do IPO) em doentes obrigou a explicitar raciocínios fisiopatológicos habitualmente formulados em bases puramente intuitivas. Esta prática revelou comportamentos óbvios após as simulações – acção reduzida das infusões PTH (simulação de hiperparatiroidismos primários) enquanto não há inibição total da respectiva secreção, necessidade de aumento da massa secretora da paratiroideia nas insuficiências renais avançadas, etc. A síntese e utilização do modelo não implicaram uma preparação matemática avançada e foram possíveis mercê da disponibilidade de “software” interactivo especificamente desenhado para a simulação de sistemas dinâmicos em que os programas se escrevem em inglês usando a simbologia simples da álgebra elementar. A função nobre de modelos desta natureza é semelhante à dos modelos usados pelos físicos desde o século XVII: permitir explicações de carácter geral funcionando como uma ferramenta intelectual para manipulação de conceitos e para a realização de “experiências pensadas” (“thought experiments”) respeitando certos princípios físicos (princípios de conservação) que estabelecem as fronteiras da realidade. -------ABSTRACT: Calcium blood levels are remarkably constant despite great variations in calcium daily intake, intestinal absorption and renal excretion. The regulation of the calcium concentration in the blood is achieved by a complex system that includes several controller factors (mainly the serum levels of calcium, phosphorus, parathyroid hormone (PTH) and calcitriol but also of steroid hormones, ions such as magnesium and other hormonal factors) and several target organs (parathyroid glands, bone, kidney and intestine). The functional response to the controlling factors obeys a variety of kinetics. The precipitation of calcium salts is a simple phase transition in which organic molecules may provide nucleation centres or inhibit the process. The combination of a controller factor with its receptor located in the cell membrane (for peptides or ions) or in the nucleus (for steroid hormones) is only the first step of a biochemical chain that introduces a huge amplification in the response. To this great variability of response we have to add the times of response that vary from minutes to weeks. It is possible to “observe” (measure) with great accuracy in biological fluids (blood, urine, faeces, etc.) the most important factors intervening in the calcium regulation (calcium, phosphorus, PTH and calcitriol). The response of the system to acute infusions of the controlling factors has also been studied. Using molecular biology techniques it has been possible to characterize some calcium homeostasis dysfunctions and better physiopathological diagnosis are expected. With the increasingly new knowledge in this area we have better capacity to diagnose but it is harder to explain correctly the underlying metabolic mechanisms. The analysis or synthesis of complex systems is the noble activity of engineers that enables them to draw bridges, dams, boats, airplanes or cars. With the availability of medium-large frame computers it was possible to use mathematical descriptions not only to draw systems but also to explain flaws in its operations. These mathematical descriptions are generally known as models by analogy with the laws (equations) of physics that allow the mathematical description of physical processes. In practice it is not possible to find general solutions for the mathematical descriptions of complex systems but (numeric) computations for specific situations can be obtained with digital computers. The introduction of mathematical models in biology and particularly in medicine is a recent event. METHODS In this thesis a simplified model of calcium homeostasis was built that enables the computation of observable variables (concentrations of calcium, phosphorus, PTH and calcitriol) and allows the comparison between the simulation values and observed values. The choice of the model’s components was made according to our clinical experience and to the published clinical and physiopathological data. The model has a modular design that allows future expansions with minor alterations in its structure. In its present form the model cannot be used for diagnosis. It is a tool designed to enlighten physiopathological processes. To exemplify its possible clinical application in the simulation of hypothetical situations and in the analysis of possible mechanisms responsible for hypo or hypercalcemias the model was used to simulate a certain number of published observations. An analysis of clinical and laboratory data from the Endocrinology Department of the Portuguese Cancer Institute (I.P.O.F.G.-C.R.O.L.,S.A.) is also presented. CONCLUSIONS In a population of 188 patients without an identifiable disease of the calcium metabolism at the Portuguese Cancer Institute the calcemia levels had a unimodal distribution with an average of 9.56 mg/dL and a S.E.M of 0.41 mg/dL. This observation confirms that serum calcium is regulated. Using published data; in which calcium metabolism was disrupted by calcium, PTH or calcitriol infusions; from biochemical and physiological studies of the action of controller factors on the calcemia; in which the response of target organs (parathyroid glands, intestine, bone, kidney) was studied it was possible to build a mathematical model of concentrated parameters of the calcium homeostasis. Analytical expressions used were based on enzymatic kinetics. The model is flexible and robust. It is stable when not disturbed and changes between steady states when disturbed. In its present form it provides simulations that reproduce closely a number of experimental clinical data. This does not mean that it can be used as a diagnostic tool for individual patients. The exhaustive utilisation of the model revealed the need of future expansions to include aspects of the calcium metabolism not included in its present form –hypertrophy or adenomas of the parathyroid glands, bone structure changes, participation of other controller factors such as magnesium – or insufficiently described – phosphate metabolism in hypoparathyroidism. The analysis of the data collected from the I.P.O.’s Endocrinology Department allowed the initial characterization of the different pathologies represented and of their possible physiopathological mechanisms. These observations are a starting point for future analysis. As examples of the relations found were: the distribution of patients in two groups according to the dependency of calcium by PTH levels or PTH levels by calcium concentration; the seasonal distribution of the serum concentrations of D25; its negative correlation with PTH concentration. It was also possible to extract the kinetics of the control of the synthesis of calcitriol by PTH. The analysis of immediate post-surgical levels of PTH in parathyroidectomized patients allowed the determination of its metabolic clearance. The model also allowed the simulation of the relations between Ca/PTH in blood, serum Ca/Fraction of tubular load excreted and Ca/P in blood for normal and high values of calcium. Simulations were made of pathological situations (in “virtual patients”): chronic infusions of calcium, PTH and calcitriol; changes in the characteristics of receptors. These simulations are not possible in real persons. They are an example of the use of this model in exploring possible mechanisms of disease through the observation of quantitative results not accessible to simple intuition. This model was useful in two phases: Firstly, its construction required a careful choice of data, its quantitative analysis and processing, an analytical description of the relations between controller factors and variables and their integration in a global structure. Secondly, the simulation of experimental or clinical (I.P.O.’s Endocrinology Department) data implied testing physiopathological explanations that previously were based on intuition. The construction and utilisation of the model didn’t demand an advanced mathematical preparation since user-friendly interactive software was used. This software was specifically designed for the simulation of dynamic systems. The programs are written in English using elementary algebra symbols. The essential function of this type of models is identical to that of those used by physicists since the XVII century which describe quantitatively natural processes and are an intellectual tool for the manipulation of concepts and the performance of “thought experiments” based in certain physical principles (conservation principles) that are the frontiers of reality.------------------RESUMÉE: Les concentrations circulantes de calcium sont constantes même pendant des variations de l’absorption intestinale et de l’élimination rénale de cet élément. La régulation de la calcémie est un système complexe qui comprend plusieurs éléments contrôleurs (la calcémie, la phosphorémie, les concentrations circulantes de l’hormone parathyroïdienne (PTH) e du calcitriol et d’autres comme les hormones stéroïdes ou des ions comme le magnésium) et plusieurs organes (glandes parathyroïdiennes, l’os, le rein et l’intestin). Les réponses de ces organes sont variées. Dans le cas plus simple, la cristallisation des sels de calcium correspond à un changement de phase dans lequel y participent des molécules organiques que la débutent, l’accélèrent ou l’inhibent. Généralement la combinaison d’un élément contrôleur avec leur récepteur de membrane (pour les peptides ou les ions) ou intracellulaire (pour les hormones stéroïdes) n’est que le premier pas d’une chaîne biochimique qu’introduit une grande amplification de la réponse. A cette variété de réponses correspondent des grandes différences des temps de réponses qu’y vont des minuits a semaines. Il est possible « observer » (mesurer) dans les fluides biologiques (sang, urine, fèces, etc.) les éléments plus importants du système de régulation de la calcémie (calcium, phosphate, PTH et le calcitriol) et les administrer en expérimentes aigus. Cette possibilité est visible dans la littérature publiée dans ce domaine qui est en croissance permanente. L’avenir des techniques de biologie moléculaire a permis caractériser des nombreuses dysfonctions de la régulation de la calcémie et on attend un diagnostique physiopathologique de ces dysfonctions chaque fois plus rigoureuses. Les connaissances dans ce domaine s’agrandissent et on a de plus de capacités pour faire des diagnostiques et il est chaque fois plus difficile les interpréter. L’analyse ou synthèse de systèmes complexes est l’activité plus noble des ingénieurs qui les permit dessiner des ponts, bateaux, avions ou automobiles. Avec des ordinateurs de médium ou grand port il les est possible utiliser descriptions mathématiques pour dessiner les systèmes et interpréter des éventuelles fautes d’opération. Ces descriptions mathématiques sont une séquence d’opérations réalisées dans un ordinateur selon « un programme informatique » qui ont reçu la désignation générique de modèles, pour analogie avec les équations de la physique qui ont été déduits d’un nombre de postulées et qu’ont permit représenter des processus physiques en équations mathématiques. Les fameuses équations de Newton sont peut-être les exemples plus connus des systèmes physiques. L’introduction des modèles mathématiques en biologie et en particulier en médecine est un évènement récent. Dans ce travaille, on a construit un modèle simplifié de l’homéostasie du calcium pour calculer les variables observables (concentrations de calcium, phosphate, PTH et calcitriol) pour les comparer. Les choix des components a été déterminés par notre expérience clinique et par l’information physiopathologique et clinique publiée. Le modèle a été construit de façon modulaire ce que permit leur postérieur expansion sans des grandes altérations dans la description mathématique et informatique déjà existante. Dans cette forme le modèle ne peut être utilisé comme un instrument de diagnostique. Il est un outil pour éclairer la physiopathologie. Le modèle a été utilisé pour simuler un certain nombre d’observations publiées et pour exemplifier leur possible utilisation clinique dans la simulation des hypothèses et de la physiopathologie des situations d’hypo ou hypercalcémie. On a fait une analyse des éléments des procès cliniques des malades observées dans le Service d’Endocrinologie de l’IPOFG-CROL, SA. Dans une population de 894 malades avec des différentes pathologies les valeurs de calcémie on une distribution uni modale avec une Médie de 9.56 mg/dL et une erreur standard de 0.41 mg/dL. Ces observations suggèrent que la calcémie soit sujette de régulation. En utilisant des résultats de travaux publiés dans lesquels le métabolisme du calcium a été changé par des infusions de calcium, calcitriol ou PTH, des études biochimiques et physiologiques sur des mécanismes d’action des éléments contrôleurs de la calcémie et de l’étude du comportement des organes cible (parathyroïdes, intestin, rein, os), il a été possible de construire un modèle mathématique de paramètres concentrés du système de régulation de la calcémie. Les expressions analytiques utilisées ont été basées sur la cinétique enzymatique de façon à que les paramètres aient eu une signification physique ou biologique. Le modèle est stable quand il n’est pas perturbé et transit entre états stationnaires quand il est sujet a des perturbations. A ce moment il fait des simulations qui reproduisent de façon satisfaisant un nombre d’observations expérimentales. La construction du modèle permit l’addiction de nouvelles relations dans les cas ou il est insuffisant. L’utilisation exhaustive du modèle a permit expliciter des aspects du métabolisme du calcium qui y ne sont pas compris – l’hyperplasie ou la formation des adénomes des parathyroïdes, les altérations de la structure des os, la participation d’outres éléments régulateurs (magnésium), ou sont insuffisamment décrites – les altérations du métabolisme des phosphates dans l’hypoparathyroidism. L’analyse de l’information des malades du Service d’Endocrinologie a permit caractériser les pathologies représentées et leurs possibles mécanismes physiopathologiques. Ces observations sont le point de départ pour les analyses futures. Sont des exemples des relations trouvées: la distribution des malades par deux groupes: ceux dans lequel la calcémie est déterminée par la PTH ou ceux dans lesquels la PTH est déterminée par la calcémie; la distribution sazonale de la concentration de la vitamine D; la corrélation négative entre la vitamine D et la PTH. On a eu la possibilité de déduire la cinétique de control de la PTH sur la synthèse du calcitriol. L’étude des niveaux circulants de PTH sur des sujets parathyroidectomisées a permit déduire leur taux de dégradation métabolique. Le modèle a permit simuler les relations Ca/PTH dans le sang, Ca/fraction éliminée par le rein, Ca/P dans le sang pour des valeurs normales ou hautes de calcium. On a fait des simulations de situations physiopathologiques (dans “malades virtuelles”): Infusions chroniques de calcium, PTH ou calcitriol; altérations des récepteurs. Ces simulations ne peuvent pas être réalisées dans les humains. Sont des exemples d’utilisation du modèle dans l’exploration des possibles mécanismes de la physiopathologie en observant des résultats quantitatifs inaccessibles à l’intuition. Le modèle a été utile pendant deux étapes des travaux: La première, dans sa construction on a choisi l’information disponible, son analyse quantitative, l’explicitation rigoureuse (analytique) des relations fonctionnelles entre les contrôleurs et les variables et sa intégration dans une structure globale. La deuxième, la simulation de situations expérimentales ou cliniques (du Service d’Endocrinologie) a obligé d’expliciter des raisonnements physiopathologiques généralement formulés utilisant l’intuition. Cette pratique a montré des comportements – action réduite des infusions de PTH (jusqu’à l’inhibition totale de leur respective sécrétion), nécessité d’augmenter la masse sécréteuse de la parathyroïde dans les insuffisants rénales, etc. La synthèse et utilisation du modèle n’ont pas besoin d’une formation avancée en mathématique et sont possibles grâce à un programme interactif qui a été conçu pour la simulation des systèmes dynamiques dans lesquels le programme se construit en anglais en utilisant la symbolique élémentaire de l’algèbre. La fonction noble de ces modèles est semblable à celles des physiques du XVII siècle: Permettre établir explications générales en fonctionnant comme un outil intellectuel pour manipuler des concepts et pour la réalisation d’expérimentes pensées en respectant certains principes de la physique (principe de la conservation) qu’établissent les frontières de la réalité.

Evaluation of Bone Remodeling in Hemodialysis Patients: Serum Biochemistry, Circulating Cytokines and Bone Histomorphometry

BACKGROUND: To optimize the noninvasive evaluation of bone remodeling, we evaluated, besides routine serum markers, serum levels of several cytokines involved in bone turnover. METHODS: A transiliac bone biopsy was performed in 47 hemodialysis patients. Serum levels of intact parathyroid hormone (iPTH; 1-84), total alkaline phosphatases (tAP), calcium, phosphate and aluminum (Al) were measured. Circulating levels of interleukin-6 (IL-6), IL-1 receptor antagonist (IL-1Ra) and soluble IL-6 receptor (sIL-6r) were determined using ELISA. Circulating IL-1beta, IL-6, IL-8, IL-10, IL-12p70 and tumor necrosis factor-alpha (TNF-alpha) were simultaneously quantified by flow cytometric immunoassay. RESULTS: Patients with low/normal bone formation rate (L/N-BFR) had significantly lower serum iPTH (p<0.001) and tAP (p<0.008) and significantly higher Al (p<0.025) than patients with high BFR. Serum calcium and phosphorus, however, did not differ (p=NS). An iPTH >300 pg/mL in association with tAP >120 U/L showed low sensitivity (58.8%) and low negative predictive value (44.0%) for the diagnosis of high BFR disease. An iPTH <300 pg/mL in association with normal or low tAP, <120 U/L, was associated with low sensitivity (66.7%) but high specificity (97.1%) for the diagnosis of L/N-BFR. Serum IL-1, IL-6, IL-12p70 and TNF-alpha were positively correlated with BFR, serum IL1-Ra and IL-10 with bone area, and by multiple regression analysis, tAP and IL-6 were independently predictive of BFR. CONCLUSIONS: Significant associations were found between several circulating cytokines and bone histomorphometry in dialysis patients. The usefulness of these determinations in the noninvasive evaluation of bone remodeling needs to be confirmed in larger dialysis populations.

Time-of-flight secondary ion mass spectrometry: new application for urinary stones analysis

Dissertação para obtenção do Grau de Doutor em Engenharia Física

Bioactive nanocomposite spheres with proved shape memory capability in bone defects

Bioactive glass nanoparticles (BGNPs) promote an apatite surface layer in physiologic conditions that lead to a good interfacial bonding with bone.1 A strategy to induce bioactivity in non-bioactive polymeric biomaterials is to incorporate BGNPs in the polymer matrix. This combination creates a nanocomposite material with increased osteoconductive properties. Chitosan (CHT) is a polymer obtained by deacetylation of chitin and is biodegradable, non-toxic and biocompatible. The combination of CHT and the BGNPs aims at designing biocompatible spheres promoting the formation of a calcium phosphate layer at the nanocomposite surface, thus enhancing the osteoconductivity behaviour of the biomaterial. Shape memory polymers (SMP) are stimuli-responsive materials that offer mechanical and geometrical action triggered by an external stimulus.2 They can be deformed and fixed into a temporary shape which remains stable unless exposed to a proper stimulus that triggers recovery of their original shape. This advanced functionality makes such SMPs suitable to be implanted using minimally invasive surgery procedures. Regarding that, the inclusion of therapeutic molecules becomes attractive.  We propose the synthesis of shape memory bioactive nanocomposite spheres with drug release capability.3   1.  L. L. Hench, Am. Ceram. Soc. Bull., 1993, 72, 93-98. 2.  A. Lendlein and S. Kelch, Angew Chem Int Edit, 2002, 41, 2034-2057. 3.  Ã . J. Leite, S. G. Caridade and J. F. Mano, Journal of Non-Crystalline Solids (in Press)

Diversity and capacity to promote maize growth of bacteria isolated from the Amazon region

ABSTRACT Maize plants can establish beneficial associations with plant growth-promoting bacteria. However, few studies have been conducted on the characterization and inoculation of these bacteria in the Amazon region. This study aimed to characterize endophytic bacteria isolated from maize in the Amazon region and to assess their capacity to promote plant growth. Fifty-five bacterial isolates were obtained from maize grown in two types of ecosystems, i.e., a cerrado (savanna) and a forest area. The isolates were characterized by the presence of the nifH gene, their ability to synthesize indole-3-acetic acid (IAA) and solubilize calcium phosphate (CaHPO4), and 16S rRNA partial gene sequencing. Twenty-four bacteria contained the nifH gene, of which seven were isolated from maize plants cultivated in a cerrado area and seventeen from a forest area. Fourteen samples showed the capacity to synthesize IAA and only four solubilized calcium phosphate. The following genera were found among these isolates: Pseudomonas; Acinetobacter; Enterobacter; Pantoea; Burkholderia and Bacillus. In addition, eight isolates with plant growth-promoting capacity were selected for a glasshouse experiment involving the inoculation of two maize genotypes (a hybrid and a variety) grown in pots containing soil. Inoculation promoted the development of the maize plants but no significant interaction between maize cultivar and bacterial inoculation was found. A high diversity of endophytic bacteria is present in the Amazon region and these bacteria have potential to promote the development of maize plants.

Flow cytometry analyses of calcification propensity

Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Engenharia Clínica)