The American Recovery and Reinvestment Act of 2009

President Obama signed the $787 billion economic stimulus package into law on February 17, 2009. What will this mean to individuals or to tax law for 2009? Withholding brackets will be adjusted so individuals should receive an extra $400 through their paychecks over the course of the year, this will encourage spending, since it will be a smaller amount returned each week. The Alternative Minimum Tax will be "patched." Some post-secondary education plans will be implemented and Hope Credits will be expanded. A first time home buyer credit that went into effect in 2007 has been changed, increasing the dollar limit and waiving the payback requirement unless the home is sold within 36 months of purchase.

LITTER DEVOLUTION AND DECOMPOSITION IN A PERIODICALLY FLOODED FOREST IN RESTINGA DA MARAMBAIA, RIO DE JANEIRO

Restinga (sandbank) areas are fragile environments, which have been subjected to anthropogenic pressures since the country colonization. So that mitigate actions can be taken, it must be developed studies to better understand the ecological processes in these environments. Thus, this study aims to quantify litter and nutrients devolution and litter decomposition in a periodically flooded forest in 'Restinga da Marambaia', Rio de Janeiro. In the study area 10 conic collectors and 30 litter bags were installed. The annual litter devolution was 7.64 Mg.ha(-1), and September was the highest contribution month. Nitrogen was the element returned to the soil to a higher amount (71.9 kg ha(-1) yr(-1)), followed by potassium (41.1 kg ha(-1) yr(-1)). Litter decomposition rate 0.0015 g g(-1) day(-1) and the half-life were 462 days. Potassium was the element that showed the highest losses in comparison to the others. Cellulose appeared as a major participant in the structure of leaf litter, followed by lignin, the latter being associated with the leathery texture of the leaves in this formation.

Distribution patterns of a marsh vegetation metacommunity in relation to habitat configuration

The identification of the factors behind the distribution of plant communities in patched habitats may prove useful towards better understanding how ecosystems function. Plant assemblages are especially important for wetland productivity and provide food and habitat to animals. The present study analyses the distribution of a metacommunity of helophytes and phreatophytes in a wetland complex in oder to identify the effects of habitat configuration on the colonisation process. Ponds with wide vegetated shores and a short distance to a big (> 10 ha) wetland, had higher species richness. The average percentage of surface covered by each species in all the wetlands correlated positively with the number of patches occupied by that species. Moreover, the community presented a nested pattern (species-poor patches were subsets of species-rich patches), and this pattern came about by selective extinction and colonisation processes. We also detected the presence of some idiosyncratic species that did not follow nestedness. Conservation managers should attempt to maximise the vegetated shore width and to reduce the degree of isolation to enhance species richness. Furthermore, a single large and poorly isolated reserve may have the highest level of biodiversity in emergent vegetation species in this wetland complex, however, the particular ecological requirements of idiosyncratic species should also be taken into account when managing this type of community.

Isolation and identification of molecular partners of the proteins encoded by the Drosophila tumor suppressor gene lethal(2)tumorous imaginal discs

Ziel dieser Arbeit war es, die funktionelle Bedeutung des Drosophila melanogaster tumor suppressor Gens lethal(2)tumorous imaginal discs (l(2)tid) durch die Identifikation von molekularen Partnern der vom Gen kodierten Proteine zu etablieren. Mit dem Screening einer Expressionsbibliothek mittels des Hefe-Di-Hybrid-Systems wurde das Protein Patched (Ptc) als ein neues Tid-bindendes Protein identifiziert. Ptc ist ein Zentralregulator der Hedhehog-Signalkette. Diese ist in der Entwicklung konserviert und in manchen humanen Krebsarten verwickelt. Die Tid/Ptc-Interaktion wurde mittels unabhängigen biochemischen Methoden wie dem GST-pulldown-Test oder der Immunopräzipitation überprüft. Außerdem ergaben funktionelle Studien in tumorosen Imaginalscheiben einen möglichen inhibitorischen Effekt von Tid über die Hh Signaltransduktion.Im letzten Teil dieser Arbeit wurde die Interaktion zwischen Tid und dem E-APC-Protein (Adenomatous polyposis coli) bewiesen. Polakis und seine Gruppe zeigten durch Studien mit dem Hefe-Di-Hybrid-System und in vitro, dass das hTid mit dem APC-Protein interagiert. Um dies auch auf Drosophila-Ebene zu überprüfen, wurden Immunopräzipitation-Studien mit den Drosophila-Gegenstücken durchgeführt. Diese Studien zeigen zum ersten Mal eine direkte Interaktion beider Proteine in vivo.

Topologically correct intersection curves of tori and natural quadrics

This thesis provides efficient and robust algorithms for the computation of the intersection curve between a torus and a simple surface (e.g. a plane, a natural quadric or another torus), based on algebraic and numeric methods. The algebraic part includes the classification of the topological type of the intersection curve and the detection of degenerate situations like embedded conic sections and singularities. Moreover, reference points for each connected intersection curve component are determined. The required computations are realised efficiently by solving quartic polynomials at most and exactly by using exact arithmetic. The numeric part includes algorithms for the tracing of each intersection curve component, starting from the previously computed reference points. Using interval arithmetic, accidental incorrectness like jumping between branches or the skipping of parts are prevented. Furthermore, the environments of singularities are correctly treated. Our algorithms are complete in the sense that any kind of input can be handled including degenerate and singular configurations. They are verified, since the results are topologically correct and approximate the real intersection curve up to any arbitrary given error bound. The algorithms are robust, since no human intervention is required and they are efficient in the way that the treatment of algebraic equations of high degree is avoided.

Plasma membrane repair and cellular damage control: the annexin survival kit

Plasmalemmal injury is a frequent event in the life of a cell. Physical disruption of the plasma membrane is common in cells that operate under conditions of mechanical stress. The permeability barrier can also be breached by chemical means: pathogens gain access to host cells by secreting pore-forming toxins and phospholipases, and the host's own immune system employs pore-forming proteins to eliminate both pathogens and the pathogen-invaded cells. In all cases, the influx of extracellular Ca(2+) is being sensed and interpreted as an "immediate danger" signal. Various Ca(2+)-dependent mechanisms are employed to enable plasma membrane repair. Extensively damaged regions of the plasma membrane can be patched with internal membranes delivered to the cell surface by exocytosis. Nucleated cells are capable of resealing their injured plasmalemma by endocytosis of the permeabilized site. Likewise, the shedding of membrane microparticles is thought to be involved in the physical elimination of pores. Membrane blebbing is a further damage-control mechanism, which is triggered after initial attempts at plasmalemmal resealing have failed. The members of the annexin protein family are ubiquitously expressed and function as intracellular Ca(2+) sensors. Most cells contain multiple annexins, which interact with distinct plasma membrane regions promoting membrane segregation, membrane fusion and--in combination with their individual Ca(2+)-sensitivity--allow spatially confined, graded responses to membrane injury.

Monte Carlo based beam model using a photon MLC for modulated electron radiotherapy

PURPOSE Modulated electron radiotherapy (MERT) promises sparing of organs at risk for certain tumor sites. Any implementation of MERT treatment planning requires an accurate beam model. The aim of this work is the development of a beam model which reconstructs electron fields shaped using the Millennium photon multileaf collimator (MLC) (Varian Medical Systems, Inc., Palo Alto, CA) for a Varian linear accelerator (linac). METHODS This beam model is divided into an analytical part (two photon and two electron sources) and a Monte Carlo (MC) transport through the MLC. For dose calculation purposes the beam model has been coupled with a macro MC dose calculation algorithm. The commissioning process requires a set of measurements and precalculated MC input. The beam model has been commissioned at a source to surface distance of 70 cm for a Clinac 23EX (Varian Medical Systems, Inc., Palo Alto, CA) and a TrueBeam linac (Varian Medical Systems, Inc., Palo Alto, CA). For validation purposes, measured and calculated depth dose curves and dose profiles are compared for four different MLC shaped electron fields and all available energies. Furthermore, a measured two-dimensional dose distribution for patched segments consisting of three 18 MeV segments, three 12 MeV segments, and a 9 MeV segment is compared with corresponding dose calculations. Finally, measured and calculated two-dimensional dose distributions are compared for a circular segment encompassed with a C-shaped segment. RESULTS For 15 × 34, 5 × 5, and 2 × 2 cm(2) fields differences between water phantom measurements and calculations using the beam model coupled with the macro MC dose calculation algorithm are generally within 2% of the maximal dose value or 2 mm distance to agreement (DTA) for all electron beam energies. For a more complex MLC pattern, differences between measurements and calculations are generally within 3% of the maximal dose value or 3 mm DTA for all electron beam energies. For the two-dimensional dose comparisons, the differences between calculations and measurements are generally within 2% of the maximal dose value or 2 mm DTA. CONCLUSIONS The results of the dose comparisons suggest that the developed beam model is suitable to accurately reconstruct photon MLC shaped electron beams for a Clinac 23EX and a TrueBeam linac. Hence, in future work the beam model will be utilized to investigate the possibilities of MERT using the photon MLC to shape electron beams.

The sonic hedgehog signaling pathway and the development of pharyngeal arch Derivatives in Haplochromis piceatus, a Lake Victoria cichlid

Objectives Pharyngeal arches develop in the head and neck regions, and give rise to teeth, oral jaws, the hyoid bone, operculum, gills, and pharyngeal jaws in teleosts. In this study, the expression patterns of genes in the sonic hedgehog (shh), wnt, ectodysplasin A (eda), and bone morphogenetic protein (bmp) pathways were investigated in the pharyngeal arches of Haplochromis piceatus, one of the Lake Victoria cichlids. Furthermore, the role of the shh pathway in pharyngeal arch development in H. piceatus larvae was investigated. Methods The expression patterns of lymphocyte enhancer binding factor 1 (lef1), ectodysplasin A receptor (edar), shh, patched 1 (ptch1), bmp4, sp5 transcription factor (sp5), sclerostin domain containing 1a (sostdc1a), and dickkopf 1 (dkk1) were investigated in H. piceatus larvae by in situ hybridization. The role of the shh pathway was investigated through morphological phenotypic characterization after its inhibition. Results We found that lef1, edar, shh, ptch1, bmp4, dkk1, sostdc1a, and sp5 were expressed not only in the teeth, but also in the operculum and gill filaments of H piceatus larvae. After blocking the shh pathway using cyclopamine, we observed ectopic shh expression and the disappearance of ptch1 expression. After six weeks of cyclopamine treatment, an absence of teeth in the oral upper jaws and a poor outgrowth of premaxilla, operculum, and gill filaments in juvenile H. piceatus were observed. Conclusions These results suggest that the shh pathway is important for the development of pharyngeal arch derivatives such as teeth, premaxilla, operculum, and gill filaments in H. piceatus.

Geometric characteristics of conics in Bézier form

Synthetic derivation of closed formulae of the geometric characteristic of a conic given in Bézier form in terms of its control polygon, (P; Q; R) and weights, (1; w; 1g)

Overal reaction rate and stoichiometry for thermal decomposition of hydrazine

An asymptotic analysîs of the Eberstein-Glassman kinetic mechanlsm for the thermal décomposition of hydrazine is carried out. It is shown that at températures near 800°K and near 1000°K,and for hydrazine molar fractions of the order of unity, 10-2 the entire kinetics reduces to a single, overall reaction. Characteristic times for the chemical relaxation of ail active, intermediate species produced in the décomposition, and for the overall reaction, are obtained. Explicit expressions for the overall reaction rate and stoichiometry are given as functions of température, total molar concentration (or pressure)and hydrazine molar fraction. Approximate, patched expressions can then be obtained for values of température and hydrazine molar fraction between 750 and 1000°K, and 1 and 10-3 respectively.

Optimization of Pumping System in Solar Pumped Laser.

The coupling between solar light radiation and laser rod medium in a solar pumped laser affects the efficiency of the laser. To optimize the pumping system, simulation of the two-stage pumping system with a Fresnel lens and conic pumping cavity is carried out with Tracepro software. According to the power density distribution along the axis at focal place of the Fresnel lens, the diameter and position of the pumping cavity window and the distance of the window from the Fresnel lens are optimized. The power density distributions along the laser rod axis of different cavity lengths and different cavity tapers are also analyzed. The optimal structure of taper cavity is obtained. The mirror relecting cavity and ceramic cavity are introduced in detail.

A Schwarz lemma for Kahler affine metrics and the canonical potential of a proper convex cone

This is an account of some aspects of the geometry of Kahler affine metrics based on considering them as smooth metric measure spaces and applying the comparison geometry of Bakry-Emery Ricci tensors. Such techniques yield a version for Kahler affine metrics of Yau s Schwarz lemma for volume forms. By a theorem of Cheng and Yau, there is a canonical Kahler affine Einstein metric on a proper convex domain, and the Schwarz lemma gives a direct proof of its uniqueness up to homothety. The potential for this metric is a function canonically associated to the cone, characterized by the property that its level sets are hyperbolic affine spheres foliating the cone. It is shown that for an n -dimensional cone, a rescaling of the canonical potential is an n -normal barrier function in the sense of interior point methods for conic programming. It is explained also how to construct from the canonical potential Monge-Ampère metrics of both Riemannian and Lorentzian signatures, and a mean curvature zero conical Lagrangian submanifold of the flat para-Kahler space.

Desarrollo de aprendizajes activos en primeros cursos universitarios: Workshop cónica.

Como ya es conocido, los profesores de Matemáticas utilizamos los ejemplos como recursos de aprendizaje para enseñar algún contenido matemático concreto, de modo que las generalizaciones y abstracciones sean más fácilmente entendidas por los alumnos, pasando de lo concreto a lo abstracto, como otra forma de enseñar y practicar en Matemáticas. Esta metodología de trabajo se ve potenciada por el uso de dispositivos móviles llamados mobile-learning (m-learning) o educación móvil (educación-m), en español. Siguiendo esta línea de trabajo, se ha realizado el workshop de cónicas que se presenta en este artículo, empleando estas nuevas tecnologías (TIC) y con el objetivo de desarrollar aprendizajes activos en Geometría a través de la resolución de problemas en los primeros cursos de Grado en las ingenierías. ABSTRACT: As it is already known, math teachers, use examples as learning resources, to teach some specific math contents, so that generalizations and abstractions are more easily understood by students, from concrete to abstract, as another way of Mathematics teaching and training. This methodology is enhanced by the use of mobile devices, called mobile-learning (m-learning) o “educación móvil” (educación-m), in Spanish. Following this strategy, the workshop of conic sections shown in this paper has been carried out, using these new technologies (ICT) and in order to develop active learning in Geometry through problem-solving at the first years of engineering degrees.

El Problema de Lambert en el Contexto de Optimización de Trayectorias Espaciales

Esta tesis se basa en el estudio de la trayectoria que pasa por dos puntos en el problema de los dos cuerpos, inicialmente desarrollado por Lambert, del que toma su nombre. En el pasado, el Problema de Lambert se ha utilizado para la determinación de órbitas a partir de observaciones astronómicas de los cuerpos celestes. Actualmente, se utiliza continuamente en determinación de órbitas, misiones planetaria e interplanetarias, encuentro espacial e interceptación, o incluso en corrección de orbitas. Dada su gran importancia, se decide investigar especialmente sobre su solución y las aplicaciones en las misiones espaciales actuales. El campo de investigación abierto, es muy amplio, así que, es necesario determinar unos objetivos específicos realistas, en el contexto de ejecución de una Tesis, pero que sirvan para mostrar con suficiente claridad el potencial de los resultados aportados en este trabajo, e incluso poder extenderlos a otros campos de aplicación. Como resultado de este análisis, el objetivo principal de la Tesis se enfoca en el desarrollo de algoritmos para resolver el Problema de Lambert, que puedan ser aplicados de forma muy eficiente en las misiones reales donde aparece. En todos los desarrollos, se ha considerado especialmente la eficiencia del cálculo computacional necesario en comparación con los métodos existentes en la actualidad, destacando la forma de evitar la pérdida de precisión inherente a este tipo de algoritmos y la posibilidad de aplicar cualquier método iterativo que implique el uso de derivadas de cualquier orden. En busca de estos objetivos, se desarrollan varias soluciones para resolver el Problema de Lambert, todas ellas basadas en la resolución de ecuaciones transcendentes, con las cuales, se alcanzan las siguientes aportaciones principales de este trabajo: • Una forma genérica completamente diferente de obtener las diversas ecuaciones para resolver el Problema de Lambert, mediante desarrollo analítico, desde cero, a partir de las ecuaciones elementales conocidas de las cónicas (geométricas y temporal), proporcionando en todas ellas fórmulas para el cálculo de derivadas de cualquier orden. • Proporcionar una visión unificada de las ecuaciones más relevantes existentes, mostrando la equivalencia con variantes de las ecuaciones aquí desarrolladas. • Deducción de una nueva variante de ecuación, el mayor logro de esta Tesis, que destaca en eficiencia sobre todas las demás (tanto en coste como en precisión). • Estudio de la sensibilidad de la solución ante variación de los datos iniciales, y como aplicar los resultados a casos reales de optimización de trayectorias. • También, a partir de los resultados, es posible deducir muchas propiedades utilizadas en la literatura para simplificar el problema, en particular la propiedad de invariancia, que conduce al Problema Transformado Simplificado. ABSTRACT This thesis is based on the study of the two-body, two-point boundary-value problem, initially developed by Lambert, from who it takes its name. Since the past, Lambert's Problem has been used for orbit determination from astronomical observations of celestial bodies. Currently, it is continuously used in orbit determinations, for planetary and interplanetary missions, space rendezvous, and interception, or even in orbit corrections. Given its great importance, it is decided to investigate their solution and applications in the current space missions. The open research field is very wide, it is necessary to determine specific and realistic objectives in the execution context of a Thesis, but that these serve to show clearly enough the potential of the results provided in this work, and even to extended them to other areas of application. As a result of this analysis, the main aim of the thesis focuses on the development of algorithms to solve the Lambert’s Problem which can be applied very efficiently in real missions where it appears. In all these developments, it has been specially considered the efficiency of the required computational calculation compared to currently existing methods, highlighting how to avoid the loss of precision inherent in such algorithms and the possibility to apply any iterative method involving the use of derivatives of any order. Looking to meet these objectives, a number of solutions to solve the Lambert’s Problem are developed, all based on the resolution of transcendental equations, with which the following main contributions of this work are reached: • A completely different generic way to get the various equations to solve the Lambert’s Problem by analytical development, from scratch, from the known elementary conic equations (geometrics and temporal), by providing, in all cases, the calculation of derivatives of any order. • Provide a unified view of most existing relevant equations, showing the equivalence with variants of the equations developed here. • Deduction of a new variant of equation, the goal of this Thesis, which emphasizes efficiency (both computational cost and accuracy) over all other. • Estudio de la sensibilidad de la solución ante la variación de las condiciones iniciales, mostrando cómo aprovechar los resultados a casos reales de optimización de trayectorias. • Study of the sensitivity of the solution to the variation of the initial data, and how to use the results to real cases of trajectories’ optimization. • Additionally, from results, it is possible to deduce many properties used in literature to simplify the problem, in particular the invariance property, which leads to a simplified transformed problem.

O PREGADOR SILENCIOSO: Ecumenismo no jornal Expositor Cristão (1886-1982)

O jornal Expositor Cristão, órgão oficial da Igreja Metodista no Brasil, nasceu em 1886, com uma proposta que se poderia chamar de ecumênica: seu primeiro nome, Methodista Catholico, revela o desejo de universalidade, confirmado pelo editorial de estréia. Seu criador, o missionário norte-americano John James Ransom, pretendia um veículo de orientação doutrinária que não fosse sectário, em consonância com a tradição wesleyana. Mas o Metodista Católico teve vida curta: em pouco mais de um ano passou a se chamar Expositor Cristão. O campo religioso brasileiro vivia, então, o período da controvérsia apologética, com a inserção do protestantismo de missão, de origem anglo-saxã, em contraposição ao catolicismo romano. O nome do recém-nascido jornal foi mais uma vítima dos embates. Este trabalho se dispôs a avaliar como o jornal tratou a questão do ecumenismo desde esse período até a entrada da Igreja Metodista no CONIC, Conselho Nacional de Igrejas Cristãs, no início da década de 1980. A pesquisa constatou que o anticatolicismo arraigado no metodismo brasileiro em seus primórdios jamais desapareceu por completo. Notou também que o metodismo não esteve imune aos conflitos interdenominacionais existentes no próprio meio evangélico. Em que pese o reconhecido pioneirismo da Igreja Metodista na criação de organismos ecumênicos brasileiros, o ecumenismo sempre enfrentou barreiras internas, mais ou menos explícitas. E o jornal Expositor Cristão, criado para ser um veículo de informação e formação doutrinária, nem sempre comunicou com a necessária clareza qual o significado que a Igreja Metodista confere à palavra ecumenismo e como ela o pratica. Em alguns momentos, a coexistência entre ecumenismo e antiecumenismo no interior do campo metodista não foi trazida à luz dos debates pelo jornal, mas permaneceu oculta por omissões e ambivalências. É o que este trabalho pôde constatar a partir de uma avaliação qualitativa do conteúdo do jornal.(AU)