Electronic scraps - Recovering of valuable materials from parallel wire cables

Every year, the number of discarded electro-electronic products is increasing. For this reason recycling is needed, to avoid wasting non-renewable natural resources. The objective of this work is to study the recycling of materials from parallel wire cable through Unit operations of mineral processing. Parallel wire cables are basically composed of polymer and copper. The following unit operations were tested: grinding, size classification, dense medium separation, electrostatic separation, scrubbing, panning, and elutriation. It was observed that the operations used obtained copper and PVC concentrates with a low degree of cross contamination. It was Concluded that total liberation of the materials was accomplished after grinding to less than 3 mm, using a cage mill. Separation using panning and elutriation presented the best results in terms of recovery and cross contamination. (C) 2007 Elsevier Ltd. All rights reserved.

Denitrification, leaching and immobilisation of N-15-labelled nitrate in winter under windrowed harvesting residues in hoop pine plantations of 1-3 years old in subtropical Australia

A field study was carried out to investigate the impacts of windrowed harvesting residues on denitrification, immobilisation and leaching of N-15-labelled nitrate applied at 20 kg N ha(-1) to microplots in second-rotation hoop pine (Araucaria cunninghamii) plantations of 1-3 years old in southeast Queensland, Australia. The PVC microplots were 235 mm in diameter and 150 mm. long, and driven into the 100 mm soil. There were three replications of such microplots for each of the six treatments which were areas just under and between 1-, 2- and 3-year-old windrows of harvesting residues. Based on gaseous N losses estimated by the difference between the recoveries of bromide (Br) applied at 100 kg Br ha(-1) and N-15-labelled nitrate, denitrification was highest (23% based on N-15 loss) in the areas just under the 1-year-old windrows 25 days after a simulated 75 mm rainfall and following several natural rainfall events. There was no significant difference in N-15 losses (14-17%) among the other treatments. The N-15 immobilisation rate was highest for microplots in the areas between the 1-year-old windrows and generally higher for microplots in the areas just under the windrows (30-39%) than that (26-30%) between the windrows. Direct measurement of N-15 gas emissions (N-15(2) + (N2O)-N-15) confirmed that the highest denitrification rate occurred in the microplots under the 1-year-old windrows although the gaseous N-15 loss calculated by gas emission was only about one-quarter that estimated by the N-15 mass balance method. A significant, positive linear relationship (P < 0.05) existed between the gaseous N-15 losses measured by the two methods used. The research indicates that considerable mineral N could be lost via denitrification during the critical inter-rotation period and early phase of the second rotation. However, the impacts of windrowed harvesting residues on N losses via denitrification might only last for a period of about 2 years. Published by Elsevier Science B.V.

Lot-fed goats - the advantages of using an enriched environment

By reducing the stress associated with high stocking density in a feedlot it is likely that goats will utilise their feed more efficiently and suffer fewer health problems. One possible method of reducing stress is to enrich the feedlot environment. In a feedlot of 160 castrated goats (average weight 24.6 +/- 2.6 kg), 2 types of feedlot structures were compared; a typical feedlot and an 'environmentally enriched' feedlot, and goats stocked at 2 densities; a high stocking density (1667 goats/ha) and a relatively low stocking density (897 goats/ha). Over a 42-day period, environmental enrichment (old car/truck tyres and wooden railway sleepers to climb on and PVC piping to mouth and butt) increased weight gain by 83% (P = 0.04) and reduced the occurrence of inanition by 36%. Aggressive behaviour at the feed trough was reduced by 30% (P = 0.03) in pens of lower density when compared with pens of higher density. We conclude that lot feeding goats in environmentally enriched surroundings will increase feed conversion and reduce the number of non-eaters when compared with typically bare pen structures. Doubling in liveweight gain of goats within enriched feedlot surroundings when compared with typical structures shows promise as a cost effective, animal-welfare-orientated practice.

The essential work of fracture through the wall of uPVC pipe

The specific essential work of fracture, w(e), has been measured for a relatively thick walled uPVC pipe as a function of position through the wall of the pipe. w(e) was highest at the surface of the pipe and decreased significantly at the centre of the pipe wall. The variation in w(e) through the wall of the pipe correlated with the processing level of the uPVC material as measured by the critical temperature, T-c. The variability in the measured values of w(e) was substantially higher in the centre of the pipe where the processing levels were lower. This was likely to be a result of the variability in the microstructure of the material where poor processing had introduced regions of poor fusion of primary PVC particles. (C) 2002 Kluwer Academic Publishers.

Polarised infrared and differential scanning calorimetry studies on oriented vinyl pipe materials

The molecular orientation in a conventionally extruded PVC pipe, a uniaxially oriented PVC pipe and a biaxially oriented PVC pipe has been studied via Infrared dichroism. The degree of order or crystallinity has also been studied by Differential Scanning Calorimetry and also via Infrared Spectroscopy. The fundamental structural difference between the conventional and oriented pipes was that polymer chains were preferentially aligning in the hoop direction for oriented pipes whereas they were fairly isotropic in the conventional pipe with a slight preferential alignment in the axial direction. Analysis of the C-Cl stretching mode indicated that the uniaxially oriented pipe had much higher alignment of the C-Cl bond in the axial direction than the biaxial pipe, which correlates with higher fracture toughness for circumferential cracking in the biaxial pipe. Both DSC and Infrared spectroscopy detected little change in the crystallinity or order in the oriented pipes compared to the conventionally extruded pipes. (C) 2002 Kluwer Academic Publishers.

Fate of N-15-labelled nitrate in a wet summer under different residue management regimes in young hoop pine plantations

A field study was conducted to investigate the fate of N-15-labelled nitrate applied at 20 kg N ha(-1) in a wet summer to microplots installed in areas under different residue management regimes in second-rotation hoop pine (Araucaria cunninghamii) plantations aged 1-3 years in south-east Queensland, Australia. PVC microplots of 235 mm diameter and 300 mm long were driven into 250 mm soil. There were three replications of each of eight treatments. These were areas just under and between 1-year-old windrows (ca. 2-3 m in width) of harvesting residues spaced 15 m apart, and with and without incorporated foliage residues (20 t DM ha(-1)); the areas just under and between 2- or 3-year-old windrows spaced 10 m apart. Only 7-29% of the added N-15 was recovered from the top 750 mm of the soil profile with the leaching loss estimated to be 70-86% over the 34-day period. The N-15 loss via denitrification was 3.7-6.3% by directly measuring the N-15 gases emitted. The microplots with the incorporated residues at the 1-year-old site had the highest N-15 loss (6.3%) as compared with the other treatments. The N-15 mass balance method together with the use of bromide (Br) tracer applied at 100 kg Br ha(-1) failed to obtain a reliable estimate of the denitrification loss. The microplots at the 1-year-old site had higher N-15 immobilisation rate (7.5-24.7%) compared with those at 2- and 3-year-old sites (2.1-3.6%). Incorporating the residues resulted in an increase in N-15 immobilisation rate (24.5-24.7%) compared with the control without the incorporated residues (8.4-14.3%). These findings suggest that climatic conditions played important roles in controlling the N-15 transformations in the wet summer season and that the residue management regimes could also significantly influence the N-15 transformations. Most of the N-15 loss occurred through leaching, but a considerable amount of the N-15 was lost through denitrification. Bromide proved to be an unsuitable tracer for monitoring the N-15 leaching and movement under the wet summer conditions. (C) 2002 Elsevier Science B.V. All rights reserved.

Ação transovariana de lufenuron (50 g/l) sobre adultos de Spodoptera Frugiperda (j. e. smith) (Lepidoptera: Noctuidae) e seu efeito sobre o parasitóide de ovos Trichogramma pretiosum Riley (Hymenoptera: Trichogrammatidae)

Avaliaram-se a ação transovariana do lufenuron em Spodoptera frugiperda e sua seletividade ao parasitóide de ovos Trichogramma pretiosum. Casais da praga foram isolados em gaiolas de PVC e alimentados com solução de mel a 10% na testemunha, e nos outros tratamentos, foi adicionado à solução de mel o regulador de crescimento de insetos Match® CE nas proporções de 12,5; 15,0 e 17,5 g i.a/l. Para verificação da ação transovariana, diariamente foram coletadas as posturas, contado o número de ovos e, posteriormente, o número de larvas eclodidas. Quarenta ovos provenientes de cada tratamento foram colados em cartelas de papel (cartolina) e expostos ao parasitismo, dentro de tubos de vidro de 1,0 x 3,5 cm, contendo uma fêmea de T. pretiosum no seu interior. Cartelas contendo 40 ovos de S. frugiperda foram imersas em soluções de lufenuron com a mesma concentração dos tratamentos anteriores e, posteriormente, expostas ao parasitismo por T. pretiosum. O lufenuron afetou consideravelmente a viabilidade dos ovos de S. frugiperda. Pelos resultados obtidos nos ensaios, relativos ao parasitóide, demonstram-se a seletividade do regulador de crescimento lufenuron e a possibilidade de sua utilização em programas de Manejo Integrado, juntamente com o parasitóide de ovos T. pretiosum.

Influence of the use of acids and films in post-harvest lychee conservation

Lychee (Litchi chinensis Sonn.) has a high commercial value; however, it has a short shelf-life because of its rapid pericarp browning. The objective of this study was to evaluate the shelf-life of 'Bengal' lychee fruits stored after treatment with hydrochloric acid and citric acid, associated with cassava starch and plastic packaging. Uniformly red pericarp fruits were submitted to treatments: 1-(immersion in citric acid 100 mM for 5 minutes + cassava starch 30 g L-1 for 5 minutes), 2-(immersion in hydrochloric acid 1 M for 2 minutes + starch cassava 30 g L-1 for 5 minutes), 3-(immersion in citric acid 100 mM for 5 minutes + polyvinyl chloride film (PVC, 14 µm thick)) and 4-(immersion in hydrochloric acid 1 M for 2 minutes + PVC film). During 20 days, the fruits were evaluated for mass loss, pericarp color, pH, soluble solids and titratable acidity, vitamin C of the pulp and pericarp and activities of polyphenol oxidase and peroxidase of the pericarp. The treatment with hydrochloric acid associated with PVC was the most effective in maintaining the red color of the pericarp for a period of 20 days and best preservation of the fruit. The cassava starch associated with citric acid, and hydrochloric acid did not reduce the mass loss and did not prevent the browning of lychee fruit pericarp.

Conservação de pinha com uso de atmosfera modificada e refrigeração

Os frutos da pinheira possuem limitações para sua distribuição a mercados distantes, por causa do rápido amadurecimento, que os torna muito macios, de difícil manuseio sem a ocorrência de danos e de conservação extremamente reduzida. O objetivo deste trabalho foi avaliar a influência do filme de policloreto de vinila (PVC), associado às temperaturas de refrigeração, na conservação pós-colheita da pinha. Os frutos foram selecionados, lavados, sanitizados e acondicionados em bandejas de isopor, com, ou sem, envolvimento de película de policloreto de vinila, e conservados a 12 e 25 ºC. Foram avaliados: cor da casca, firmeza, perda de matéria fresca, sólidos solúveis, acidez titulável, açúcares totais e amido. Os frutos conservados a 12 ºC, com policloreto de vinila, mantiveram a coloração verde da casca até o 18º dia, apresentaram menor perda de massa de matéria fresca e firmeza da casca e menor teor de sólidos solúveis e acidez titulável, em relação aos frutos armazenados a 25 ºC. A utilização da embalagem, associada à temperatura de 12 ºC, permite um período seguro de 18 dias de conservação, com adequada manutenção dos atributos físicos e químicos. Os frutos armazenados a 25 ºC conservaram-se por seis dias. A película de PVC, associada ao armazenamento de 12 ºC, pode ser utilizada para atrasar o amadurecimento dos frutos por 18 dias, mantendo sua qualidade. Os frutos que permaneceram armazenados, por seis dias, a 25 ºC com, ou sem, PVC, não apresentaram características físicas e químicas desejáveis.

Relação entre os caracteres determinantes das eficiências no uso de nitrogênio e fósforo em milho

O melhoramento genético das eficiências no uso de N (EUN) e P (EUP) é um dos meios para se obterem produtividades de grãos satisfatórias, com menores custos e de modo sustentável. Todavia, pouco se sabe a respeito da relação entre os caracteres determinantes dessas eficiências, o que tem dificultado o uso da seleção precoce e indireta. Portanto, objetivou-se, com este trabalho, identificar a relação entre os caracteres determinantes das eficiências no uso de nitrogênio e fósforo, em milho. Para isso, avaliaram-se 14 linhagens e 39 híbridos simples, em dois experimentos, em baixa e alta disponibilidade de N e P, em delineamento inteiramente ao acaso, com duas repetições, em esquema fatorial simples. Os experimentos foram conduzidos em telado. Foram utilizados tubos cilíndricos de PVC, com 4 dm³ de capacidade, preenchidos com dois tipos de substrato, de acordo com o experimento. As soluções nutritivas foram fornecidas a partir do sétimo dia após o transplantio, aplicando-se 250 ml tubo-1, a cada dois dias. As plantas foram colhidas em estádio de seis folhas completamente expandidas (V6) e os caracteres avaliados foram: massa da parte aérea seca (MPS), área de raiz específica (ARE), comprimento de raízes laterais (CRLat) e axiais (CRAxi) e os dois componentes da EUN e EUP, as eficiências de utilização (EUt) e a de absorção (EAb). Foram realizadas análises de variância e de trilha dos dados coletados. Os caracteres de raiz não apresentaram efeitos significativos sobre as EUN e EUP. A MPS é o principal determinante das EUN e EUP, independentemente da disponibilidade nutricional.

Absorption of primary macronutrients and soybean growth at different compactation densities and moisture levels in a silt loam soil

ABSTRACT Soybean cultivation is increasing rapidly in the region of Alto Vale do Itajaí, State of Santa Catarina, where there is a predominance of silt soils. The objective of this work was to evaluate the content of primary macronutrients in shoots and shoot and root vegetative growth of soybean (Glicine max L. Merrill) grown in a silt-loam soil under different compactation densities and moisture levels. A randomized block design in a 4x4 factorial arrangement was used, with four compactation densities: 1.00; 1.20; 1.40 and 1.60 Mg m-3, and four soil moisture levels: 0.130; 0.160; 0.190 and 0.220 kg kg-1 and four replications. Each pot consisted of the overlapping of three 150-mm PVC rings, where soil was maintained in the higher and lower part of the pot with a density of 1.00 Mg m-3 and in the intermediate ring, the compactation densities were increased. Values of soil density higher than 120 Mg m-3 negatively affected N, P and K uptake by soybean plants, as well as the plant mass of the shoots and roots. The higher levels of soil moisture reduced the compaction effect and promoted better absorption of P and K.

A new approach for measuring corporate reputation

This study describes the concept of corporate reputation and reviews some of the major points that exist when it comes to measuring it. It thus suggests a new index for measurement and its advantages and disadvantages are pointed out. The consistency of the seven key variables for the collecting indicator is described by the results of a factor analysis and correlations. Finally, the indicator is put to test by gathering the perception of corporate reputation of 1500 individuals for 69 companies belonging to 15 different industrial sectors, in Peru. The results indicate that the proposed index variables are not necessarily of greatest interest to the study sample in which companies have a better performance. Also greater memorial companies aren't necessarily those that enjoy a greater corporate reputation. Managerial implications for the organizations in the process of managing and monitoring the dimensions involved of this key asset are also referenced.

Avaliação das condições de estocagem de vacinas vivas, atenuadas contra o sarampo, em postos de vacinação credenciados e em centros de saúde do Estado de São Paulo (Brasil)

Para avaliar as condições de estocagem de vacinas vivas, atenuadas contra o sarampo, da rede de vacinação do Estado de São Paulo (Brasil), foram visitados 71 Postos de Vacinação Credenciados particulares (PVC), assim como 117 Centros de Saúde oficiais (CS), sobre os quais interessava saber a respeito da qualidade da estocagem a frio. Os parâmetros adotados foram: a) temperatura das geladeiras de uso (+2 a +8°C) e de estoque (+ 8°C); b) validade do produto; c) título das vacinas conservadas nestas geladeiras, avaliado pela inoculação de diluições das amostras de vacinas em células Vero; d) proteção à luz. Dos CS pesquisados, 85,33% apresentaram geladeiras com temperatura de acordo com a recomendada e 100% das vacinas neles estocadas com título e validade satisfatórios. Nos PVC foram encontrados, com maior freqüência, lotes de vacina fora do prazo de validade (14,49%), com títulos abaixo do mínimo requerido (3,53%) e geladeiras de uso e de estoque com temperaturas inadequadas (33,80%). Necessário se faz que as condições de estocagem das vacinas contra o sarampo (temperatura e proteção à luz), prevalentes no momento, sejam melhoradas e que as bulas passem a acompanhar o produto a eles entregue, para que os responsáveis pela vacinação obedeçam as recomendações do laboratório produtor com relação às condições de estocagem, validade e administração do imunobiológico, uma vez que a pesquisa revelou que estas não são observadas com o rigor necessário.

Development of membranes for purification of liquid effluents from stainless steel pickling

Este trabalho foi desenvolvido no âmbito de um projecto europeu intitulado: “Operational demonstration of innovative and sustainable nitrate elimination in stainless steel pickling by higher power biological denitrification technique” Projecto RESP-CT-2007-00047, tendo em vista o desenvolvimento de membranas para o tratamento de efluente resultante da decapagem do aço inox. Numa fase inicial foram desenvolvidas membranas compostas assimétricas pelo método de polimerização interfacial. Estas membranas foram produzidas utilizando uma membrana comercial de suporte em polietersulfona e os filmes selectivos de poliamiada foram formados por reacção entre 1,3,5-tri(clorocarboni)benzeno (TMC) e várias dinaminas: piperazina (PIP), N-(2-aminoetil)-piperazina (EAP), 1,4-bis(3-aminopropil)-piperazina (DAPP), 6-metil-1,3,5 triazina-2,4 diamina (MTC), Isoforodiamina (IPD) e Dietilenetriamina (DET). A elaboração de membranas de TFC (thin film composite) tinha como objectivo a retenção de sais do efluente resultante da decapagem do aço inox. No entanto, chegou-se a conclusão de que o principal problema do efluente não era a retenção dos sais, mas sim a retenção da matéria orgânica. Assim, já não era necessa´ria a produção de membranas compostas, mas apenas uma membrana suporte simples de microfiltração. Numa segunda fase procedeu-se a preparação da membrana suporte pelo método da inversão de fase, tendo-se testado vários tipos de polímeros: PVC (polyvinyl chloride), PEI (Polyetherimide) e um polímero termoplástico geral. A membrana seleccionada foi a de PEI, com base na sua permeabilidade à água destilada e ao efluente resultante das águas residuais da decapagem do aço inox. Todas as membranas elaboradas durante a realização deste trabalho foram testadas na célula de Berghof a uma pressão de 4bar e com agitação. O principal prâmetro estudado foi a permeabilidade da membrana.

Estudo de esmalte estufa aquoso definitivo

Mestrado em Engenharia Química