Comparison of aggregation behaviors between branched and linear block polyethers: MesoDyn simulation study

The comparison of aggregation behaviors between the branched block polyether T1107 (polyether A) and linear polyether (EO)(60)(PO)(40)(EO)(60) (polyether B) in aqueous solution are investigated by the MesoDyn simulation. Polyether A forms micelles at lower concentration and has a smaller aggregation number than B. Both the polyethers show the time-dependent micellar growth behaviors. The spherical micelles appear and then change to rod-like micelles with time evolution in the 10 vol% solution of polyether A. The micellar cluster appears and changes to pseudo-spherical micelles with time evolution in the 20 vol% solution of polyether A. However, the spherical micelles appear and change to micellar cluster with time evolution in the 20 vol% polyether B solution. The shear can induce the micellar transition of both block polyethers. When the shear rate is 1x10(5) s(-1), the shear can induce the sphere-to-rod transition of both polyethers at the concentration of 10 and 20 vol%. When the shear rate is lower than 1x10(5) s(-1), the huge micelles and micellar clusters can be formed in the 10 and 20 vol% polyether A systems under the shear, while the huge micelles are formed and then disaggregated with the time evolution in the 20 vol% polyether B system.

吸水链霉菌、放线菌Sp.253和金色毛壳菌的次生代谢产物研究

链霉菌是十分重要的一类放线菌，绝大多数的抗生素都由该类细菌产生。毛壳属真菌是一类重要的丝状真菌，从中也发现有很多结构新颖、活性独特的活性物质。因此本论文对两株链霉菌的活性成分及一株金毛壳菌的次生代谢产物进行了研究。 1．从吸水链霉菌（Streptomyces hygroscopicus 1.358）液态发酵产物（乙酸乙酯提取物）中分离得到3个化合物，通过波谱方法鉴定为RK955A (1)、Nigericin（2）、Elaiophylin（3）。以青霉素耐药-金黄色葡萄球菌作为指示菌的抗菌活性测定表明，三者均具有较强抗菌活性。 2．通过抗肿瘤体外活性筛选模型筛选得到得到一株链霉属土壤放线菌，从中分离得到六个化合物：苯乙酰胺（4）、苯丙酰胺（5）、肉桂酰胺（6）、3-（N-（甲酰胺基）乙酰基）吲哚（7）、鸟苷磷酸（8）、鸟苷（9）。 3．从金色毛壳菌（Chaetomium aureus）的固态培养物中分离得到13个化合物，利用波谱方法将其鉴定为：金毛壳菌素A（10）、金毛壳菌素B（11）、Eugenetin（12）、Eugenitol（13）、Chaetoquadrin A（14）、Chaetoquadrin B（15）、Chaetoquadrin G（16）、Chaetoquadrin H（17）、Chaetochromin A（18）、Sterigmatocystin（19）、O-methylsterigmatocystin（20）、3β-羟基-麦角甾-5，7，22-三烯（21）和过氧麦角甾醇（22）。 4．综述了聚醚类抗生素的结构、生物合成、生物活性及作用机理。 The genus Streptomyces (Actinomycetes) is an important group of microbe. Most antibiotics known nowdays are discovered from species of Streptomyces. The fungi of the genus Chaetomium have attracted much attention because various kinds of secondary metabolites with diverse bioactivities have been found from them. Thus, the bioactive compounds from two strains of Streptomyces and the secondary metabolites of Chaetomium aureus were investigated. 1. Three compounds were isolated from the ethyl acetate extract of the fermentation broth of Streptomyces hygroscopicus. They are identified to be elaiophylin (1), nigericin (2), and antibiotic RK955A (3) on the basis of their spectroscopic data. Compounds 1-3 possess antibacterial activities against Staphyloccocus aureus. 2. It was found that the extract of the fermented broth of a strain of Actinomycetes could inhibit some tumor cel lines. Separation of the bioactive fraction led to the isolation of six compounds. They were characterized to be phenylacetamide (4), phenylpropylamide (5), trans-cinnamamide (6), 3- (N- (formylmethyl) acetamide) indole (7), guanylicacid (8), and guanosine (9). 3. From the fermented broth of Chaetomium aureus, 13 compounds were isolated for the first time. They were determined to be chaetomiumycin A (10), chaetomiumycin B (11), eugenetin (12), eugenitol (13), chaetoquadrin A (14), chaetoquadrin B (15), chaetoquadrin G (16), chaetoquadrin H (17), chaetochromin A (18), sterigmatocystin (19), O-methylsterigmatocystin (20), 3β-hydroxyergosta-5, 7, 22-triene (21) and peroxy-ergosterol (22). Compounds 10 and 11 are new ones. 4. Structure, biosynthesis, biological activity, and mechanisms of polyether antibiotics were reviewed.

Preparation and characteristics of nonflammable polyimide materials

The thermal and flame-retardant properties of homo- and copolyimides were evaluated. Those containing sulfone linkages in the backbone were found to be more flame retardant. Both properties were dependent on the composition. A polyimide/silica nanocomposite was obtained through sol-gel processing. The effects of the addition of silica an the dispersion, interfacial adhesion, fire resistance, mechanical properties, and thermal stability of the composites were investigated. SEM analysis showed a good dispersion of silica with a diameter of 50-300 nm in the organic matrices. The addition of silica increased the fire retardancy and mechanical properties of the composites. (C) 2000 John Wiley & Sons, Inc.

Synthesis and properties of sulfonated poly[bis(benzimidazobenzisoquinolinones)] as hydrolytically and thermooxidatively stable proton conducting ionomers

Novel sulfonated poly [bis(benzimidazobenzisoquinolinones)] as hydrolytically and thermooxidatively stable electrolyte for high -temperature fuel cell applications are reported. A series of sulfonated polymers (SPBIBI-x, x refers to molar percentage of sulfonated dianhydride monomer) were synthesized from 6,6'-disulfonic-4,4'-binaphthyl-1,1',8,8'-tetracarboxylic dianhydride (SBTDA), 4,4-binaphthyl-1,1,8,8-tetracarboxylic dianhydride (BTDA), and 3,3'-diaminobenzidine. The chemical structures of those polymers as well as model compounds synthesized from SBTDA and o-phenylenediamine were confirmed by nuclear magnetic resonance (NMR) and Fourier transform infrared (FTIR).

Novel hydrophilic-hydrophobic multiblock copolyimides as proton exchange membranes: Enhancing the proton conductivity

A series of novel multiblock copolymers based on sulfonated copolyimides were developed and evaluated for use as proton exchange membranes (PEMs). In these multiblock copolyimides, the hydrophilic blocks were composed of the sulfonated dianhydride and the sulfonated diamine, with sulfonic acid groups on every aromatic ring (i.e., fully sulfonated). This molecular design was implemented to effectively enhance the proton conductivity. The properties of the multiblock copolyimides with varying IEC values or block lengths were investigated to obtain a better understanding of the relationship between molecular structure and properties of proton exchange membranes. The water uptake and proton conductivity were found to be highly dependent upon their structure. The block copolymers displayed significantly higher proton conductivities, especially at low relative humidity than the random copolymers with a similar IEC.

Synthesis and characterization of rigid-rod sulfonated polyimides bearing sulfobenzoyl side groups as proton exchange membranes

A novel wholly aromatic diamine, 2,2 '-bis(3-sulfobenzoyl)benzidine (2,2 '-BSBB), was successfully prepared by the reaction of 2,2 '-dibenzoylbenzidine (2,2 '-DBB) with fuming sulfuric acid. Copolymerization of 1,4,5,8-naphathlenetetracarboxylic dianhydride with 2,2 '-BSBB and 2,2 '-DBB generated a series of rigid-rod sulfonated polyimides. The synthesized copolymers with the -SO3H group on the side chain of polymers possessed high molecular weights revealed by their high viscosity and the formation of tough and flexible membranes. The copolymer membranes exhibited excellent oxidative stability and mechanical properties due to their fully aromatic structure extending through the backbone and pendent groups. They displayed clear anisotropic membrane swelling in water with negligibly small dimensional changes in the plane direction of the membrane. The proton conductivities of copolymer membranes increased with increasing IEC and temperature, reaching value above 1.25 x 10(-1) S/cm at 20 degrees C, which is higher than that of Nafion (R) 117 at the same measurement condition. They displayed reasonably high proton conductivity due to the higher acidity of benzoyl sulfonic acid group, the larger interchain spacing, which is available for water to occupy, taking their lower water uptake (WU) into account. Consequently, these materials proved to be promising as proton exchange membrane.

Sulfonated polyimides bearing benzimidazole groups for proton exchange membranes

A series of sulfonated polymides containing benzimidazole groups were synthesized using 4,4'-binaphthyl-1,1',8,8'-tetracarboxylic dianhydride (BTDA), 4,4'-diaminodiphenyl ether-2,2'-disulfonic acid (ODADS) as the sulfonated diamine, and 2-(3',5-diaminophenyl)benzimidazole (a) or 6,4'-diamino-2-phenylbenzimidazole (b) as the nonsulfortated diamine. The electrolyte properties of the synthesized polyimides Ia-x, Ib-x, x refers to molar percentage of the sulfonated diamine) were investigated and compared with those of polyimides (Ic-x) from BTDA, ODADS, and m-phenylenediamine (c). All synthesized polyimides possessed high molecular weights revealed by their high viscosity, and formation of tough and flexible membranes. Polyintides with benzimidazole groups exhibited much better swelling capacity than those without benzimiclazole groups. This was attributed to the strong interchain interaction through basic benzimidazole functions and sulfonic acid groups. The sulfortated polyimides that are incorporated with 1, 1',8,8'-binaphthalimide exhibited better hydrolytic stability than that with 1,4,5,8-naphthalimide. Polyimide membranes with good water stability as well as high proton conductivity were developed. Polyimide membrane (Ia - 90), for example, did not lose mechanical properties after being soaked in boiling water for tOOO h, while its proton conductivity was still at a high level (compared to that of Nafion 117).

Thermal and dynamic mechanical properties of PES/PPS blends

Blends of poly(ether-sulfone) (PES) and poly(phenylene sulfide) (PPS) with various compositions were prepared using an internal mixer at 290degreesC and 50 rpm for 10 min. The thermal and dynamic mechanical properties of PES/PPS blends have been investigated by means of DSC and DMA. The blends showed two glass transition temperatures corresponding to PPS-rich and PES-rich phases. Both of them decreased obviously for the blends with PES matrix. On the other hand, T-g of PPS and PES phase decreased a little when PPS is the continuous phase. In the blends quenched from molten state the cold crystallization temperature of PPS was detected in the blends of PES/PPS with mass ratio 50/50 and 60/40. The melting point, crystallization temperature and the crystallinity of blended PPS were nearly unaffected when the mass ratio of PES was less than 60%, however, when the amount of PES is over 60% in the blends, the crystallization of PPS chains was hindered. The thermal and the dynamic mechanical properties of the PPS/PES blends were mainly controlled by the continued phase.