Finishing of flat parts led by lapping kinematics on abrasive disc dressed in agreement with overlap factors

This paper discusses the investigation of an abrasive process for finishing flat workpieces, based on the combination of important grinding and lapping characteristics. Instead of loose abrasive grains between the workpiece and the lapping plate, a resinoid grinding wheel of hot-pressed silicon carbide is placed on the plate of a device resembling a lapping machine. The resin bond grinding wheel is dressed with a single-point diamond. In addition to keeping the plate flat, dressing also plays the role of interfering in the behavior of the process by varying the overlap factor (Ud). It was found that the studied process simplify the set-up and can be controlled more easily than in lapping, whose is a painstaking process. The surface roughness and flatness deviation proved comparable to those of lapping, or even finer than it, with the additional advantage of a less contaminated workpiece surface with a shiny appearance. The process was also monitored by acoustic emission (AE), which indicates to be a promissing and suitable technique for use in this process. Copyright © 2008 by ASME.

Fuzzy logic to predict thermal damages of ground parts

One of the critical problems in implementing an intelligent grinding process is the automatic detection of workpiece surface burn. This work uses fuzzy logic as a tool to classify and predict burn levels in the grinding process. Based on acoustic emission signals, cutting power, and the mean-value deviance (MVD), linguistic rules were established for the various burn situations (slight, intermediate, severe) by applying fuzzy logic using the Matlab Toolbox. Three practical fuzzy system models were developed. The first model with two inputs resulted only in a simple analysis process. The second and third models have an additional MVD statistic input, associating information and precision. These two models differ from each other in terms of the rule base developed. The three developed models presented valid responses, proving effective, accurate, reliable and easy to use for the determination of ground workpiece burn. In this analysis, fuzzy logic translates the operator's human experience associated with powerful computational methods.

A case study of concurrent engineering application on the development of parts for the white goods industry in Brazil

This classical way to manage product development processes for massive production seems to be changing: high pressure for cost reduction, higher quality standards, markets reaching for innovation lead to the necessity of new tools for development control. Into this, and learning from the automotive and aerospace industries factories from other segments are starting to understand and apply manufacturing and assembly oriented projects to ease the task of generate goods and from this obtain at least a part of the expected results. This paper is intended to demonstrate the applicability of the concepts of Concurrent Engineering and DFM/DFA (Design for Manufacturing and Assembly) in the development of products and parts for the White Goods industry in Brazil (major appliances as refrigerators, cookers and washing machines), showing one case concerning the development and releasing of a component. Finally is demonstrated in a short term how was reached a solution that could provide cost savings and reduction on the time to delivery using those techniques.

Analysis of inventory management in small business auto parts

The objective of this study was to analyze the production process and supply control in order to identify possible gaps and develop a method for managing supplies. The relevance of this research is on the benefits that can obtain by identifying the problems of supply control. The research method used was the case study, which was grounded on tripod semi-structured interviews, on-site observation, and document analysis. This methodology was very suitable because it can be analyzed and cross checked. The possibility of implementation of the proposal obtained from the theoretical framework, that together with the complementary actions suggested here, offers the opportunity to make the process more productive and profitable. This work allowed one to observe the weaknesses in managing the supply chain and at what points to work should be improved. It allowed to use some scientific models in the company object of study in order to improve supply management. © 2011 IEEE.

Influence of optimized lubrication-cooling and minimum quantity lubrication on the cutting forces, on the geometric quality of the surfaces and on the micro-structural integrity of hardened steel parts

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Antioxidant and cytotoxic effects of crude extract, fractions and 4-nerolidylcathecol from aerial parts of pothomorphe umbellata L. (Piperaceae)

The crude ethanolic extract from aerial parts of Pothomorphe umbellata L. (Piperaceae) and fractions obtained by partitions sequentially among water-methanol, methylene chloride, and ethyl acetate, as well as the major constituent, 4-nerolidylcatechol, were, respectively, evaluated and evidenced for antioxidant and cytotoxic effects through fluorometric microplate and microculture tetrazolium assays in HL-60 cells. The crude ethanolic extract demonstrated the preeminent antioxidant activity (IC50 = 1.2 μg/mL) against exogenous cytoplasmic reactive oxygen species, followed by the water-methanolic (IC50 = 4.5 μg/mL), methylene chloride (IC 50 = 5.9 g/mL), ethyl acetate (IC50 = 8.0 g/mL), 4-nerolidylcatechol (IC50 = 8.6 g/mL), and the sterol fractions (IC50 > 12.5 μg/mL). Vitamin C, the positive control used in this assay, presented IC50 value equivalent to 1.7 μg/mL. 4-Nerolidylcatechol (IC50 = 0.4 μg/mL) and methylene chloride fraction (IC50 = 2.3 μg/mL) presented considerable cytotoxicity probably because of the presence of an o-quinone, an auto-oxidation by product of the catechol. Polar compounds, present in the ethanol extract, appear to increase the solubility and stability of the major active constituent, acting synergistically with 4-nerolidylcatechol, improving its pharmacokinetic parameters and increasing significantly its antioxidant activity which, in turn, suggests that the aqueous-ethanolic extract, used in folklore medicine, is safe and effective. © 2013 Andrey P. Lopes et al.

Chemical characterization and acaricide potential of essential oil from aerial parts of Tagetes patula L. (Asteraceae) against engorged adult females of Rhipicephalus sanguineus (Latreille, 1806)

Rhipicephalus sanguineus, commonly known as the brown dog tick, is one of the most widely distributed species of tick. In dogs, it can cause anemia and provide the transmission of pathogenic microorganisms such as Babesia canis, Ehrlichia canis, Hepatozoon canis, Anaplasma platys, and Mycoplasma haemocanis. To man, it can transmit the intracellular parasites Rickettsia rickettsii and Rickettsia conorii, the causative agents of the Rocky Mountain spotted fever in the Americas and Mediterranean and spotted fever in Europe and North Africa. Its control is performed by applying synthetic formulations composed of pyrethroids; however, continued use of these products results in environmental damage and acquisition of resistance. Alternatively, studies with botanical insecticides have been increasingly recurrent. Therefore, this study aimed to test the efficacy of essential oil of Tagetes patula, a ruderal species widely described in the literature for its insecticidal properties, in engorged females of R. sanguineus by the adults immersion test (AIT) and impregnated paper disk test (IPDT). The essential oil used, through gas chromatography coupled to mass spectrometry, revealed the presence of 55 compounds, being the 4-vinyl guaiacol and gamma terpinene the majority ones. The AIT compared to the IPDT was more efficient in inhibiting oviposition of tick; however, the eggs laid by the females submitted to saturated atmosphere with essential oil, from IPDT, not hatched, interrupted their development cycle. Besides being a pioneer work, the results presented here contributes to new researches, aiming the incorporation of essential oil in an acaricide for use in the environment. © 2013 Springer-Verlag Berlin Heidelberg.

Phenolic composition of the berry parts of hybrid grape cultivar BRS Violeta (BRS Rubea×IAC 1398-21) using HPLC-DAD-ESI-MS/MS

The grape is considered a major source of phenolic compounds when compared to other fruits and vegetables, however, there are many cultivars with distinct characteristics directly linked to phenolic profile. Thus, the present study aimed to identify and quantify, for the first time and in detail, the phenolic compounds present in the skin, flesh and seeds of BRS Violeta grape berry using combination of SPE methodologies and analytical HPLC-DAD-ESI-MS/MS. The study was extended to the different berry parts and the most important grape and wine phenolic families, and has revealed interesting features. Violeta grape has a very thick skin (46% of grape weight) that accumulated the most of grape phenolic compounds: great amount of anthocyanins (3930. mg/kg, as malvidin 3,5-diglucoside), together with also important amounts of flavonols (150. mg/kg, as quercetin 3-glucoside), hydroxycinnamic acid derivatives (HCAD; 120. mg/kg, as caftaric acid), and proanthocyanidins (670. mg/kg, as (+)-catechin); in contrast, it seems to be a low resveratrol producer. Violeta grape seeds accounted for similar proportions of low molecular weight flavan-3-ols (mainly monomers; 345. mg/kg, as (+)-catechin) and proanthocyanidins (480. mg/kg, as (+)-catechin). Violeta grape is a teinturier cultivar, but it only contained traces of anthocyanins and low amounts of all the other phenolic types in its red-colored flesh. The anthocyanin composition of Violeta grape was dominated by anthocyanidin 3,5-diglucosides (90%). Within flavonols, myricetin-type predominated and kaempferol-type was missing. In addition to expected hydroxycinnamoyl-tartaric acids, several isomeric esters of caffeic and p-coumaric acids with hexoses were tentatively identified, accounting for relevant proportions within the pool of HCAD. Although pending of further confirmation over successive vintages, the aforementioned results suggest that BRS Violeta grape cultivar could be considered an interesting candidate for the elaboration of highly colored and antioxidant-rich grape juices and wines. © 2013 Elsevier Ltd.

Case study on the manufacture of pistons and other motor-vehicle parts in Mexico

Information Paper, No 15

Case study on the interchange of automotive parts between Chile, Argentina and Venezuela

Information Paper, No 16

The economies of scale in the manufacture of selected automotive parts

Information Paper, No 23

Intraspecific variability of Holostylis reniformis: concentration of lignans, as determined by maceration and supercritical fluid extraction (SFE-CO2), as a function of plant provenance and plant parts

Maceration and supercritical fluid extraction were used to prepare extracts from parts of plants (Holostylis reniformis) collected in two different regions of Brazil. ¹H NMR, HPLC-DAD-ESI/MS, HPLC-DAD, GC-MS, and chemometric techniques were used to analyse lignans in the extracts and showed that yields of SFE-CO2 were less than or equal to those of hexane maceration extracts. These analyses, in conjunction with the concentrations of aliphatic hydrocarbons, fatty acids and their methyl and ethyl derivatives in the extracts, also allowed the chemical composition of parts and provenance of the plant to be differentiated.

Inorganic phosphates in juices from different parts of sugarcane stalks (cultivars ctc 9, ctc 15 and ctc 16)

This study aimed to quantify, the inorganic phosphates in sugarcane juice from nodes and internodes of three sugarcane cultivars. The experimental design was a randomized block in factorial scheme 3x2. The main treatments were three sugarcane cultivars and two parts of the stalk (nodes and internodes). The inorganic phosphates contents were determined for each treatment. The results were subjected to variance analysis by the F test; when statistically significant, means were compared by the Tukey test at 5% probability. It is concluded that the three cultivars (CTC 9, CTC 16 and CTC 15) showed similar values regarding the content of inorganic phosphates present in the juice, and these values are considered adequate for a good performance in juice clarification. For the different parts of the stem, differences were observed in the levels of the nutrient studied, which showed a higher concentration in the node than in the internode.

Evaluation of the acidity in the juice from different parts of the stem of sugarcane, cycle 2010/2011

The acidity levels present in the juice of sugarcane can cause problems in its processing. This study aimed to compare the values of total, volatile and fixed acidity in the juice of the stem nodes and internodes of sugarcane. The experimental design was a completely randomized, 3x2 factorial arrangement with four replications, using three varieties of sugarcane (IAC91-1099; ISC95 and CTC7-5000) divided into node and internode. The stems were collected and separated in node and internode. After extraction of juice from each part, total, volatile and fix acidities were determined. The results were subjected to variance analysis the by F test and compared by the Tukey test at 5% probability. The cultivar CTC7 had the lowest levels of total and fixed acidity. Cultivar IAC91-1099 showed high levels of fixed acidity on both parts of the stem, and high volatile acidity at the node. In the stem, the values of volatile acidity showed no definite pattern between cultivars. The node has, in general, a higher fixed acidity, but some cultivars have shown opposite results.

Action of ethanolic extract from aerial parts of Tagetes patula L. (Asteraceae) on hatchability and embryogenesis of Rhipicephalus sanguineus eggs (Acari: Ixodidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)