Worldwide outdoor round robin study of organic photovoltaic devices and modules

Accurate characterization and reporting of organic photovoltaic (OPV) device performance remains one of the important challenges in the field. The large spread among the efficiencies of devices with the same structure reported by different groups is significantly caused by different procedures and equipment used during testing. The presented article addresses this issue by offering a new method of device testing using “suitcase sample” approach combined with outdoor testing that limits the diversity of the equipment, and a strict measurement protocol. A round robin outdoor characterization of roll-to-roll coated OPV cells and modules conducted among 46 laboratories worldwide is presented, where the samples and the testing equipment were integrated in a compact suitcase that served both as a sample transportation tool and as a holder and test equipment during testing. In addition, an internet based coordination was used via plasticphotovoltaics.org that allowed fast and efficient communication among participants and provided a controlled reporting format for the results that eased the analysis of the data. The reported deviations among the laboratories were limited to 5% when compared to the Si reference device integrated in the suitcase and were up to 8% when calculated using the local irradiance data. Therefore, this method offers a fast, cheap and efficient tool for sample sharing and testing that allows conducting outdoor measurements of OPV devices in a reproducible manner.

Long-term Accelerated Multistress Aging of Composite Outdoor Polymeric Insulators

Polymeric outdoor insulators are being increasingly used for electrical power transmission and distribution in the recent years. One of the current topics of interest for the power transmission community is the aging of such outdoor polymeric insulators. A few research groups are carrying out aging studies at room temperature with wet period as an integral part of multistress aging cycle as specified by IEC standards. However, aging effect due to dry conditions alone at elevated temperatures and electric stress in the presence of radiation environment has probably not been explored. It is interesting to study and understand the insulator performance under dry conditions where wet periods are either rare or absent and to estimate the extent of aging caused by multiple stresses. This paper deals with the long-term accelerated multistress aging on full-scale 11 kV distribution class composite silicone rubber insulators. In order to assess the long-term synergistic effect of electric stress, temperature and UV radiation on insulators, they are subjected to accelerated aging in a specially designed multistress-aging chamber for 3800 hours. All the stresses are applied at an accelerated level. Using a data acquisition system developed for the work, leakage current has been monitored in LabVIEW environment. Chemical changes due to degradations have been studied using Energy Dispersive X-Ray analysis, Scanning Electron Microscope and Fourier transform Infrared Spectroscopy. Periodically different parameters like low molecular weight (LMW) molecular content, hydrophobicity, leakage current and surface morphology were monitored. The aging study is under progress and only intermediate results are presented in this paper.

Long-term Accelerated Weathering of Outdoor Silicone Rubber Insulators

Multistress aging/weathering of outdoor composite polymeric insulators has been a topic of interest for power transmission research community in the last few decades. This paper deals with the long-term accelerated weathering of full-scale distribution class silicone rubber composite insulators. To evaluate the long-term synergistic effect of electric stress, temperature and UV radiation on insulators, they were subjected to accelerated weathering in a specially designed multistress-aging chamber for 30,000 h. All the insulators were subjected to the same level of electrical and thermal stresses but different UV radiation levels. Chemical, physical and electrical changes due to degradation have been assessed using various techniques. It was found that there was a monotonous reduction of the content of low molecular weight (LMW) molecules with the duration of the weathering. Further, due to oxidation and weathering there is an appreciable increase in surface roughness and atomic percentage of oxygen. There is no change in the leakage current of new and aged insulators under both wet and dry conditions at the end of the aging. The results also indicate that there is no influence of UV radiation on the silicone rubber for the durations and conditions under which the studies were made.

Lipid composition in microalgal community under laboratory and outdoor conditions

Microalgae are the most sought after sources for biofuel production due to their capacity to utilize carbon and synthesize it into high density liquid. Current energy crisis have put microalgae under scanner for economical production of biodiesel. Modifications like physiological stress and genetic variation is done to increase the lipid yield of the microalgae. A study was conducted using a microalgal consortium for a period of 15 days to evaluate the feasibility of algal biomass from laboratory as well as outdoor culture conditions. Native algal strains were isolated from a tropical freshwater lake. Preliminary growth studies indicated the relationship between the nitrates and phosphates to the community structure through the days. The lipid profile done using Gas chromatography – Mass spectrometry, revealed the profile of the algal community. Resource competition led to isolation of algae, aided in the lipid profile of a single alga. However, further studies on the application of the mixed population are required to make this consortium approach economically viable for producing algae biofuels.

Commercial production of Clarias fry and fingerlings in indoor and outdoor concrete tank systems

Induced breeding technique by hypophysation is being applied at the Kainji Lake Research Institute Fisheries Division Hatchery complex in New Bussa, Nigeria, for the production of Clarias fry and fingerlings in indoor and outdoor concrete tank systems. The hatchlings are fed on livefood (zooplankton) and artificial feed. Source of zooplankton is from cultured stock which is maintained throughout the breeding season by fertilization. Production values show that an average of over 4,000 hatchlings (larvae) can be produced by a female breeder (over-700g wt) and percentage survival after two months ranges between 70 to 75%. With the proposed modification and expansion project, an estimated production of over 0.5 million fingerlings per breeding season is projected

The variation of water quality in the outdoor concrete tank and earthen pond

The paper reports on the study carried out at the Federal College of Freshwater Fisheries and Technology (Nigeria) and the Hatchery Complex in 1997. The physico-chemical parameters of an earthen fish pond and concrete tank were analysed. The abundance and distribution of phytoplankton and zooplankton were recorded. A total of eight species of phytoplankton were observed. These species can be classified as Chlorophyceae (green algae), Bacillariophyceae (diatom algae) and Cyanophyta (blue-green algae). Eight zooplankton species were observed in the pond and 6 in the tank. Moina was observed and recorded as the most abundant cladoceran species in the tank

Effect of different feeding levels on the production of Heterobranchus bidorsalis in outdoor concrete tanks

Fry of Heterobranchus bidorsalis (mean weight, 0.03g) were fed at 10, 20, 30, 40 or 50% of their body weight (bw)/day in outdoor concrete tanks in New Bussa, Nigeria. The fry attained the highest average weight of 6.66g in 10 weeks when fed at 40% bw/day. Feed conversion ratio ranged from 2.13 to 9.65, the protein efficiency ratio from 1.33 to 5.93. Results indicated that H. bidorsalis are efficient feed converters. Feed intake was significantly different (p<0.05) between the treatments, specific growth rate (SGR), daily growth rate (DGR), production and average weight gain indicated that 40% of fish biomass was the optimum feeding level

An investigation of the effect of replacing fish meal with soyabean meal, groundnut cake and blood meal at varied proportion on growth and food utilization of the Clarias anguillaris fingerlings fed in outdoor hapas

Fingerlings of Clarias anguillaris obtained from a homogenous source through induce breeding and each with a mean weight of 2.8g were stocked in ten hapas each measuring 1.0x1.0m in outdoor concrete tank and were fed for eight (8) weeks. Results shows that the best growth rate was recorded among fingerlings fed fish meal as the only protein source (TD5) while DT2 containing soya bean, groundnut cake (40%), blood meal as the protein sources came next. The growth rate of fingerlings fed DT2 (40 % groundnut cake, 10% soyabean meal and 10% blood meal) was higher than those fed DT4 containing 10% fish meal but lower than those fed DT5 which has fish meal as its sole source of protein (53.0%). Analysis of various growth parameters like SGR, FCR and PER. shows that DT5 was the overall best diet but there was no significant statistical difference in weight gained by fish fed the five diets (P <0.05)

Comparative growth and survival of fry of Clarias gariepinus (B), Clarias anguillaris (L), Heterobranchus bidorsalis (G), Heteroclarias, Clariabranchus and Clarias hybrids under outdoor nursery management system

Hybrids of Clariid catfishes; C. gariepinus (Netherlands), C. anguillaris, H. bidorsalis and their parental species were monitored for 8 weeks in 2 x 2 x 1m outdoor concrete tanks. The fry were fed NIFFR diet (40% crude protein) twice daily, 7 days of the week. Growth and survival records were taken weekly. The male HEB X female CLG hybrid showed an overall highest performance in growth rate while the lowest was recorded in male CLA X female CLG hybrid. The male HEB X female CLG hybrid grew at a faster rate than its reciprocal hybrid. In view or their growth rate, it is possible that the growth and survival rates or H. bidorsalis especially at the fry to fingerling stage could be improved through hybridization. The hybrid have potential as commercial food fish

Growth response, feed conversion rate and cost benefits of hybrid catfish fed maggot meal based diets in outdoor tanks

The growth response, feed conversion ratio and cost benefits of hybrid catfish, Heterobranchus longifilis x Clarias gariepinus fed five maggot meal based diets were evaluated for 56 days in outdoor concrete tanks. Twenty-five fingerlings of the hybrid fish were stocked in ten outdoor concrete tanks of dimension 1.2mx0.13mx0.18m and code MM sub(1)-MM sub(5) in relation to their diet name. Five isonitrogenous and isocaloric maggot meal based diets namely MM sub(1)-0% maggot meal, MM sub(2)-25% maggot meal, MM sub(3)-50% maggot meal, MM sub(4-)75% maggot meal and MM sub(5-) 100% maggot meal were used for the experiment. The higher the proportion of maggot in the meal, the higher the ether extract and crude fiber. No significance difference P>0.05 exists between ash content of the experimental diets. Diet MM sub(2) had the best growth performance and highest MGR with a significant difference P<0.05 with other diets fed fish. No significance differences P>0.05 exists between the growth parameters for diets MM sub(1), MM sub(3), and MM sub(4). A positive correlation (r=1.0) exists (P<0.05, 0.25) between the growth parameters for the different experimental diets. Highest correlation r super(2)=0.9981 exists P<0.05 between MGR within the treatments. However, there no significant (P>0.05) difference in expenditure but there is between the profit indices and incidence of cost between the trials. MM sub(2) has the best yield cost and net profit. Without any reservation, inclusion of maggot based meal diet is recommended as feed of hybrid catfish to 75% inclusion for growth and profit incidence

Modelización de la propagación radioeléctrica en entornos indoor y outdoor aplicada a los sistemas de comunicaciones móviles

[ES]En este documento se tratará de recopilar toda la información y documentación que se ha buscado y desarrollado para la elaboración del proyecto que se está llevando a cabo. El objetivo final del mismo consiste en el análisis y estudio de los canales de propagación en entornos indoor y outdoor y su posterior comercialización en el mercado de las telecomunicaciones. Este documento recoge los aspectos necesarios para finalizar el proyecto con éxito, tales como planificación, alcance, beneficios del proyecto,presupuesto...

Outdoor robot mugikor baten eraikuntza eta kontrola Arduino bitartez

Proiektu honetan robot mugikor bat eraiki eta arduino bitartez kontrolatu da. Robota edozein smartphone erabiliz kontrolatu daiteke Bluetooth RC Car aplikazioa erabiliz. Ultrasoinu sentsorea du talkak ekiditeko eta GPSaren bidez uneko posizioaren berri ematen du. Honetaz gain, wifi bidez mezuak ere bidal ditzake proiektuan bertan garatu den echo zerbitzarira.