Development of Mini Space Bioreactor System

微重力对空间细胞培养的影响规律一直是国际空间生物学的重点研究领域。而空间细胞培养技术和方法作为空间细胞生物学研究的基础，其概念性和原理性设计是正确区分重力对细胞的直接作用和间接作用的前提。另外，空间实验成本高昂，空间细胞培养装置的体积、重量、功耗是首要的制约因素。为保证充分物质交换，满足细胞代谢需求，同时尽可能降低由细胞供液形式产生的力学环境对细胞的影响，区分重力对细胞的直接作用和间接作用，我们研制了逆流片层式微型细胞培养装置。实验表明为使培养液流动对细胞生长影响最小，流动剪切应变率应小于1s-1。通过理论计算分析的逆流片层式微型细胞培养装培养室内流场及流动剪切范围表明，该装置可以满足要求。通过实验检测细胞培养时的氧耗、糖耗等，可以确定不同种类细胞的培养液流量范围。培养室内采用经表面改性的聚合物网架作为细胞载体，使得培养空间得到充分利用，并利于操作。从而为空间细胞培养研究提供了一种新的技术手段。

Complete agent based simulation of mini-grids

EuroPES 2009

Procedures to prevent the occurrence of potentially dangerous situations during the operation of the Mackereth 1-metre mini or short sediment corer

During the 1950s and 1960s, F.J.H. Mackereth developed and published plans for a series of pneumatic samplers for lake sediments. Unfortunately, as the equipment was continually evolving during ensuing research, no user manuals, beyond the original publication, had been produced. Over the last few years there have been a few potentially very serious accidents with the 1-metre corer, which has prompted the authors to carry out a risk assessment. This highlighted two weaknesses in the design and its later developments. They can be corrected simply by checking for screw threads that may have been added to the exhaust port on the mini-corer, and by changing the operating procedure. An A4 nine-page user manual is now available from the authors. A small charge ( pound sterling 10 in 1998) will be made to cover handling costs and postage.

Microelectrode Implants for Spinal Cord Stimulation in Rats

Paralysis is a debilitating condition afflicting millions of people across the globe, and is particularly deleterious to quality of life when motor function of the legs is severely impaired or completely absent. Fortunately, spinal cord stimulation has shown great potential for improving motor function after spinal cord injury and other pathological conditions. Many animal studies have shown stimulation of the neural networks in the spinal cord can improve motor ability so dramatically that the animals can even stand and step after a complete spinal cord transaction.

This thesis presents work to successfully provide a chronically implantable device for rats that greatly enhances the ability to control the site of spinal cord stimulation. This is achieved through the use of a parylene-C based microelectrode array, which enables a density of stimulation sites unattainable with conventional wire electrodes. While many microelectrode devices have been proposed in the past, the spinal cord is a particularly challenging environment due to the bending and movement it undergoes in a live animal. The developed microelectrode array is the first to have been implanted in vivo while retaining functionality for over a month. In doing so, different neural pathways can be selectively activated to facilitate standing and stepping in spinalized rats using various electrode combinations, and important differences in responses are observed.

An engineering challenge for the usability of any high density electrode array is connecting the numerous electrodes to a stimulation source. This thesis develops several technologies to address this challenge, beginning with a fully passive implant that uses one wire per electrode to connect to an external stimulation source. The number of wires passing through the body and the skin proved to be a hazard for the health of the animal, so a multiplexed implant was devised in which active electronics reduce the number of wires. Finally, a fully wireless implant was developed. As these implants are tested in vivo, encapsulation is of critical importance to retain functionality in a chronic experiment, especially for the active implants, and it was achieved without the use of costly ceramic or metallic hermetic packaging. Active implants were built that retained functionality 8 weeks after implantation, and achieved stepping in spinalized rats after just 8-10 days, which is far sooner than wire-based electrical stimulation has achieved in prior work.

Condições de saúde bucal em atletas dos XV Jogos Pan-Americanos e III Jogos Parapan-Americanos, Rio de Janeiro, Brasil, 2007

O estudo epidemiológico transversal randomizado objetivou avaliar condições de saúde bucal nos competidores dos XV Jogos Pan-Americanos (JPA) e III Jogos Parapan-Americanos (JPPA), 2007. Foram enviados convites para 5.662 atletas (JPA) e 1.300 (JPPA). Radiografias panorâmicas digitais (RPD) foram utilizadas para o exame de triagem nos 2 eventos, e nos JPPA, os atletas também foram submetidos à avaliação do sangramento gengival interdental (SI) através de uma versão modificada do Índice de Sangramento Interdental de Eastman (EIBI). Foram obtidas RPDs de 410 atletas dos JPA, média de idade 24,38 (dp5,35), 55% homens; e de 118 dos atletas dos JPPA, média de idade de 32,3 (dp9,53), 77,97% homens. 121 competidores (JPPA) foram avaliados para SI: 78,51% homens, média de idade 32,6(dp9,6), e foram separados em grupos (G), conforme sua deficiência física: GI c/ deficiência visual (DV), com 2 subgrupos: GI-a: DV tardia e GI-c-: DV congênita/precoce; GII- deficiência de membro superior; com 1 subgrupo: GII-t: deficiência/ausência bilateral; GIII- deficiência de membro inferior (grupo controle). As RPDs foram examinadas por 1 examinador com o Kodak Dental Imaging(v6.7). A frequência e a distribuição do SI foram calculadas, e os grupos foram comparados. Resultados da triagem com RPDs, representados por número de observações(média por atleta) JPA//número de observações(média por atleta JPPA: Dentes erupcionados/ hígidos: 9097(22,19)//2451(20,77); Ausentes: 803(1,96 //405(3,43); Não erupcionados ou impactados: 330(0,80)//52(0,44); Parcialmente erupcionados e/ou hígidos: 109(0,27)//20(0,17); Cárie extensa: 261(0,64)//62(0,53); Cárie extensa e lesão periapical: 96(0,23)//50(0,42); Tratamento endodôntico e lesão periapical: 24(0,06)//13(0,11); Restaurados: 2298(5,60)//670(5,68); Imagens radiolúcidas patológicas circunscritas: 23(0,06)//0; Raízes-residuais: 27(0,07)//22(0,19); Implantes:6(0,01)//5(0,04); Dentes anteriores fraturados: 13 (0,03)//3(0,03); Molares bandados: 26(0,06)//11(0,09); Dentes anômalos: 7(0,02)//12(0,10). Resultados para SI: G-I>G-III (p=0.0002);GI-c>GI-a (p=0,042). Homens exibiram > freqüência de SI (3,6%+1,7) que mulheres (0,8%+0,5), p<0,01. Conclusões: Os dados das 2 populações de atletas mostraram que há uma grande variação na saúde bucal entre os indivíduos avaliados. Diversas condições com potencial de influenciar o desempenho esportivo dos atletas foram detectadas através de radiografias panorâmicas digitais, sugerindo que um programa de saúde bucal deve ser incluído como parte da preparação destes indivíduos.A avaliação da frequência e distribuição de sangramento gengival interdental em uma população de atletas que competiu nos III Jogos Parapan-Americanos, revelou que o tipo de deficiência ou limitação física dos competidores é um fator que influencia na saúde gengival desses indivíduos. O planejamento de um programa de saúde bucal para esta população deve ser adaptado às diferentes limitações de cada atleta.

Development of osteoinductive Si-based coatings to improve dental implants' performance

290 p.

ANNEALING BEHAVIOUR OF HIGH DOSE As** plus IMPLANTS.

The annealing behaviour of doses up to 4. 10**1**6 ions/cm**2 implanted at ion currents up to 10ma is described. Differences between rapid isothermal and furnace annealing in the measured sheet resistances are due to different amounts of diffusion and to loss of dopant by evaporation. Implantation at high currents (10ma) does not appear to affect the quality of the regrown material provided the temperature rise during implantation is small.

COMPARISON OF MILLISECOND ANNEALING OF B IMPLANTS AND ISOTHERMAL ANNEALING FOR TIMES OF A FEW SECONDS.

The annealing behaviour of B implants in the millisecond time regime using a combination of swept line beam and background heating is compared with isothermal annealing with heating cycles of a few seconds. Carrier concentration profiles show that under annealing conditions which restrict diffusion, millisecond processing gives higher activation of B implants than isothermal heating. Transmission electron microscopy shows that millisecond annealing also results in a lower defect density.

The role for low carbon electrification technologies in poverty reduction and climate change strategies: A focus on renewable energy mini-grids with case studies in Nepal, Peru and Kenya

As a potential poverty reduction and climate change strategy, this paper considers the advantages and disadvantages of using renewable energy technologies for rural electrification in developing countries. Although each case must be considered independently, given a reliable fuel source, renewable energy mini-grids powered by biomass gasifiers or micro-hydro plants appear to be the favoured option due to their lower levelised costs, provision of AC power, potential to provide a 24. h service and ability to host larger capacity systems that can power a wide range of electricity uses. Sustainability indicators are applied to three case studies in order to explore the extent to which sustainable welfare benefits can be created by renewable energy mini-grids. Policy work should focus on raising awareness about renewable energy mini-grids, improving institutional, technical and regulatory frameworks and developing innovative financing mechanisms to encourage private sector investments. Establishing joint technology and community engagement training centres should also be encouraged. © 2011 Elsevier Ltd.

In vitro osteoblast response to ferritic stainless steel fiber networks for magneto-active layers on implants

The use of a porous coating on prosthetic components to encourage bone ingrowth is an important way of improving uncemented implant fixation. Enhanced fixation may be achieved by the use of porous magneto-active layers on the surface of prosthetic implants, which would deform elastically on application of a magnetic field, generating internal stresses within the in-growing bone. This approach requires a ferromagnetic material able to support osteoblast attachment, proliferation, differentiation, and mineralization. In this study, the human osteoblast responses to ferromagnetic 444 stainless steel networks were considered alongside those to nonmagnetic 316L (medical grade) stainless steel networks. While both networks had similar porosities, 444 networks were made from coarser fibers, resulting in larger inter-fiber spaces. The networks were analyzed for cell morphology, distribution, proliferation, and differentiation, extracellular matrix production and the formation of mineralized nodules. Cell culture was performed in both the presence of osteogenic supplements, to encourage cell differentiation, and in their absence. It was found that fiber size affected osteoblast morphology, cytoskeleton organization and proliferation at the early stages of culture. The larger inter-fiber spaces in the 444 networks resulted in better spatial distribution of the extracellular matrix. The addition of osteogenic supplements enhanced cell differentiation and reduced cell proliferation thereby preventing the differences in proliferation observed in the absence of osteogenic supplements. The results demonstrated that 444 networks elicited favorable responses from human osteoblasts, and thus show potential for use as magnetically active porous coatings for advanced bone implant applications. © 2012 Wiley Periodicals, Inc.