Chemical and isotopic composition of rocks and minerals at ODP Site 209-1275

This paper reports results of an investigation of a representative collection of samples recovered by deep-sea drilling from the oceanic basement 10 miles west of the rift valley axis in the crest zone of the Mid- Atlantic Ridge at 15°44'N (Sites 1275B and 1275D). Drilling operations were carried out during Leg 209 of the Drilling Vessel JOIDES Resolution within the framework of the Ocean Drilling Program (ODP). The oceanic crust was penetrated to depth of 108.7 m at Site 1275B and 209 m at Site 1275D. We reconstructed the following sequence of magmatic and metamorphic events resulting in the formation of a typical oceanic core complex of slow-spreading ridges: (1) formation of strongly fractionated (enriched in iron and titanium) tholeiitic magmatic melt parental to gabbroids under investigation in a large magma chamber located in a shallow mantle and operating for a long time under steady-state conditions; (2) transfer of the parental magmatic melt of the gabbroids to the base of the oceanic crust, its interaction with host mantle peridotites, and formation of troctolites and plagioclase peridotites; (3) intrusion of enriched trondhjemite melts as veins and dikes in the early formed plutonic complex, contact recrystallization of the gabbro, and development in the peridotite-gabbro complex of enriched geochemical signatures owing to influence of trondhjemite injections; (4) emplacement of dolerite dikes (transformed to diabases); (5) metamorphism of upper epidoteamphibolite facies with participation of marine fluids; and (6) rapid exhumation of the plutonic complex to the seafloor accompanied by greenschist-facies metamorphism. Distribution patterns of Sr and Nd isotopes and strongly incompatible elements in the rocks suggest contributions from two melt sources to the magmatic evolution of the MAR crest at 15°44'N: a depleted reservoir responsible for formation of the gabbros and diabases and an enriched reservoir, from which trondhjemites (granophyres) were derived.

Dive depth profile and immobilisation data of adult male and female Weddell seals at Drescher Inlet from expedition DRE1998

Adult male and female Weddell seals (Leptonychotes weddellii) were fitted with Time-depth recorders (TDR) at Drescher Inlet (Riiser Larsen Ice Shelf), eastern Weddell Sea coast, in February 1998. Eight of 15 data sets were selected for analyses to investigate the seals' foraging behaviour (doi:10.1594/PANGAEA.511465, doi:10.1594/PANGAEA.511454, doi:10.1594/PANGAEA.511456, doi:10.1594/PANGAEA.511457, doi:10.1594/PANGAEA.511459, doi:10.1594/PANGAEA.511462, doi:10.1594/PANGAEA.511466, doi:10.1594/PANGAEA.511467). These data sets provided simultaneous dive records of eight seals over eight days. The seals primarily foraged within two depth layers, these being from the sea surface to 160 m where temperature and salinity varied considerably, and from 340 to 450 m near the bottom where temperature was lowest and salinity highest, with little variation. While pelagic and benthic diving occurred during daylight, the seals foraged almost exclusively in the upper water column at night. Trawling during daytime confirmed that Pleuragramma antarcticum were by far the most abundant fish both in the pelagial and close to the bottom. Pelagic night-hauls at 110-170 m depth showed highly variable biomass of P. antarcticum with a peak at around midnight. The temporal changes in the local abundance of P. antarcticum, particularly in the pelagial, may explain the trends in the seals' pelagic and benthic foraging activities. This is the first study which describes the jaw movements of a hunting seal which are presumably indicative of feeding events. Trophic links from the Weddell seal to fish, zooplankton and krill, Euphausia superba, are discussed. Another seven data sets did not overlap substantially with the selected time frame (doi:10.1594/PANGAEA.511458, doi:10.1594/PANGAEA.511460, doi:10.1594/PANGAEA.511464, doi:10.1594/PANGAEA.511468, doi:10.1594/PANGAEA.511469, doi:10.1594/PANGAEA.511453, doi:10.1594/PANGAEA.511463). A total of 25 Weddell seals were immobilised during the study period using a combination of ketamine, xylazine, and diazepam. Seven seals were drugged once, 15 seals two times, and three were drugged three times, coming to a total of 46 immobilisation procedures. Narcoses were terminated with yohimbine (doi:10.1594/PANGAEA.438933).

MBIS: Multivariate Bayesian Image Segmentation Tool

We present MBIS (Multivariate Bayesian Image Segmentation tool), a clustering tool based on the mixture of multivariate normal distributions model. MBIS supports multi-channel bias field correction based on a B-spline model. A second methodological novelty is the inclusion of graph-cuts optimization for the stationary anisotropic hidden Markov random field model. Along with MBIS, we release an evaluation framework that contains three different experiments on multi-site data. We first validate the accuracy of segmentation and the estimated bias field for each channel. MBIS outperforms a widely used segmentation tool in a cross-comparison evaluation. The second experiment demonstrates the robustness of results on atlas-free segmentation of two image sets from scan-rescan protocols on 21 healthy subjects. Multivariate segmentation is more replicable than the monospectral counterpart on T1-weighted images. Finally, we provide a third experiment to illustrate how MBIS can be used in a large-scale study of tissue volume change with increasing age in 584 healthy subjects. This last result is meaningful as multivariate segmentation performs robustly without the need for prior knowledge.

E-CRM e a influência da digital analytics.

O mercado consumidor passou por diversas transformações ao longo do tempo devido principalmente à evolução tecnológica. A evolução tecnológica proporcionou ao consumidor a possibilidade de escolher por produtos e marcas, e permite a oportunidade de colaborar e influenciar a opinião de outros consumidores através do compartilhamento de experiências, principalmente através da utilização de plataformas digitais. O CRM (gerenciamento do relacionamento com o consumidor) é a forma utilizada pelas empresas para conhecerem o consumidor e criar um relacionamento satisfatório entre empresa e consumidor. Esse relacionamento tem o intuito de satisfazer e fidelizar o consumidor, evitando que ele deixe de consumir a marca e evitando que ele influencie negativamente outros consumidores. O e-CRM é o gerenciamento eletrônico do relacionamento com o consumidor, que possui todas as tradicionais características do CRM, porém com o incremento do ambiente digital. O ambiente digital diminuiu a distância entre pessoas e empresas e se tornou um meio colaborativo de baixo custo de interação com o consumidor. Por outro lado, este é um meio onde o consumidor deixa de ser passivo e se torna ativo, o que o torna capaz de influenciar não só um pequeno grupo de amigos, mas toda uma rede de consumidores. A digital analytics é a medição, coleta, análise e elaboração de relatórios de dados digitais para os propósitos de entendimento e otimização da performance em negócios. A utilização de dados digitais auxilia no desenvolvimento do e-CRM através da compreensão do comportamento do consumidor em um ambiente onde o consumidor é ativo. O ambiente digital permite um conhecimento mais detalhado dos consumidores, baseado não somente nos hábitos de compra, mas também nos interesses e interações. Este estudo tem como objetivo principal compreender como as empresas aplicam os conceitos do e-CRM em suas estratégias de negócios, compreendendo de que forma a digital analytics contribui para o desenvolvimento do e-CRM, e compreendendo como os fatores críticos de sucesso (humano, tecnológico e estratégico) impactam na implantação e desenvolvimento do e-CRM. Quatro empresas de diferentes segmentos foram estudadas através da aplicação de estudo de caso. As empresas buscam cada vez mais explorar as estratégias de e-CRM no ambiente digital, porém existem limitações identificadas devido à captação, armazenamento e análise de informações multicanais, principalmente considerando os canais digitais. Outros fatores como o apoio da alta direção e a compreensão de funcionários para lidar com estratégias focadas no consumidor único também foram identificados neste estudo. O estudo foi capaz de identificar as informações mais relevantes para a geração de estratégias de gerenciamento eletrônico do relacionamento com o consumidor e identificou os aspectos mais relevantes dos fatores críticos de sucesso.

Seizure detection algorithm for neonates based on wave-sequence analysis

Objective: The description and evaluation of the performance of a new real-time seizure detection algorithm in the newborn infant. Methods: The algorithm includes parallel fragmentation of EEG signal into waves; wave-feature extraction and averaging; elementary, preliminary and final detection. The algorithm detects EEG waves with heightened regularity, using wave intervals, amplitudes and shapes. The performance of the algorithm was assessed with the use of event-based and liberal and conservative time-based approaches and compared with the performance of Gotman's and Liu's algorithms. Results: The algorithm was assessed on multi-channel EEG records of 55 neonates including 17 with seizures. The algorithm showed sensitivities ranging 83-95% with positive predictive values (PPV) 48-77%. There were 2.0 false positive detections per hour. In comparison, Gotman's algorithm (with 30 s gap-closing procedure) displayed sensitivities of 45-88% and PPV 29-56%; with 7.4 false positives per hour and Liu's algorithm displayed sensitivities of 96-99%, and PPV 10-25%; with 15.7 false positives per hour. Conclusions: The wave-sequence analysis based algorithm displayed higher sensitivity, higher PPV and a substantially lower level of false positives than two previously published algorithms. Significance: The proposed algorithm provides a basis for major improvements in neonatal seizure detection and monitoring. Published by Elsevier Ireland Ltd. on behalf of International Federation of Clinical Neurophysiology.

Interactions at the head-tape interface of a linear tape system

Many of the recent improvements in the capacity of data cartridge systems have been achieved through the use of narrower tracks, higher linear densities and continuous servo tracking with multi-channel heads. These changes have produced new tribological problems at the head/tape interface. It is crucial that the tribology of such systems is understood and this will continue since increasing storage capacities and faster transfer rates are constantly being sought. Chemical changes in the surface of single and dual layer MP tape have been correlated to signal performance. An accelerated tape tester, consisting of a custom made cycler ("loop tester"), was used to ascertain if results could be produced that were representative of a real tape drive system. A second set of experiments used a modified tape drive (Georgens cycler), which allowed the effects of the tape transport system on the tape surface to be studied. To isolate any effects on the tape surface due to the head/tape interface, read/write heads were not fitted to the cycler. Two further sets of experiments were conducted which included a head in the tape path. This allowed the effects of the head/tape interface on the physical and chemical properties of the head and tape surfaces to be investigated. It was during the final set of experiments that the effect on the head/tape interface, of an energised MR element, was investigated. The effect of operating each cycler at extreme relative humidity and temperature was investigated through the use of an environmental chamber. Extensive use was made of surface specific analytical techniques such as XPS, AFM, AES, and SEM to study the physical and chemical changes that occur at the head/tape interface. Results showed that cycling improved the signal performance of all the tapes tested. The data cartridge drive belt had an effect on the chemical properties of the tape surface on which it was in contact. Also binder degradation occurred for each tape and appeared to be greater at higher humidity. Lubricant was generally seen to migrate to the tape surface with cycling. Any surface changes likely to affect signal output occurred at the head surface rather than the tape.

A novel detection method for determining a surgeon's fatigue and hand tremor

The thesis presents new methodology and algorithms that can be used to analyse and measure the hand tremor and fatigue of surgeons while performing surgery. This will assist them in deriving useful information about their fatigue levels, and make them aware of the changes in their tool point accuracies. This thesis proposes that muscular changes of surgeons, which occur through a day of operating, can be monitored using Electromyography (EMG) signals. The multi-channel EMG signals are measured at different muscles in the upper arm of surgeons. The dependence of EMG signals has been examined to test the hypothesis that EMG signals are coupled with and dependent on each other. The results demonstrated that EMG signals collected from different channels while mimicking an operating posture are independent. Consequently, single channel fatigue analysis has been performed. In measuring hand tremor, a new method for determining the maximum tremor amplitude using Principal Component Analysis (PCA) and a new technique to detrend acceleration signals using Empirical Mode Decomposition algorithm were introduced. This tremor determination method is more representative for surgeons and it is suggested as an alternative fatigue measure. This was combined with the complexity analysis method, and applied to surgically captured data to determine if operating has an effect on a surgeon’s fatigue and tremor levels. It was found that surgical tremor and fatigue are developed throughout a day of operating and that this could be determined based solely on their initial values. Finally, several Nonlinear AutoRegressive with eXogenous inputs (NARX) neural networks were evaluated. The results suggest that it is possible to monitor surgeon tremor variations during surgery from their EMG fatigue measurements.

Functional localisation of human sensory-motor cortex using magnetoencephalography

The 19 channel Neuromagnetometer system in the Clinical Neurophysiology Unit at Aston University is a multi-channel system, unique in the United Kingdom. A bite bar head localisation and MRI co-registration strategy which enabled accurate and reproducible localisation of MEG data into cortical space was developed. This afforded the opportunity to study magnetic fields of the human cortex generated by stimulation of peripheral nerve, by stimulation of visceral sensory receptors and by those evoked through voluntary finger movement. Initially, a study of sensory-motor evoked data was performed in a healthy control population. The techniques developed were then applied to patients who were to undergo neurosurgical intervention for the treatment of epilepsy and I or space occupying lesions. This enabled both validation of the effective accuracy of source localisation using MEG as well as to determine the clinical value of MEG in presurgical assessment of functional localisation in human cortex. The studies in this thesis have demonstrated that MEG can repeatedly and reliably locate sources contained within a single gyrus and thus potentially differentiate between disparate gyral activation. This ability is critical in the clinical application of any functional imaging technique; which is yet to be fully validated by any other 'non-invasive' functional imaging methodology. The technique was also applied to the study of visceral sensory representation in the cortex which yielded important data about the multiple cortical representation of visceral sensory function.

Complementary methods to investigate the development of clogging within a horizontal sub-surface flow tertiary treatment wetland

A combination of experimental methods was applied at a clogged, horizontal subsurface flow (HSSF) municipal wastewater tertiary treatment wetland (TW) in the UK, to quantify the extent of surface and subsurface clogging which had resulted in undesirable surface flow. The three dimensional hydraulic conductivity profile was determined, using a purpose made device which recreates the constant head permeameter test in-situ. The hydrodynamic pathways were investigated by performing dye tracing tests with Rhodamine WT and a novel multi-channel, data-logging, flow through Fluorimeter which allows synchronous measurements to be taken from a matrix of sampling points. Hydraulic conductivity varied in all planes, with the lowest measurement of 0.1 md1 corresponding to the surface layer at the inlet, and the maximum measurement of 1550 md1 located at a 0.4m depth at the outlet. According to dye tracing results, the region where the overland flow ceased received five times the average flow, which then vertically short-circuited below the rhizosphere. The tracer break-through curve obtained from the outlet showed that this preferential flow-path accounted for approximately 80% of the flow overall and arrived 8 h before a distinctly separate secondary flow-path. The overall volumetric efficiencyof the clogged system was 71% and the hydrology was simulated using a dual-path, dead-zone storage model. It is concluded that uneven inlet distribution, continuous surface loading and high rhizosphere resistance is responsible for the clog formation observed in this system. The average inlet hydraulic conductivity was 2 md1, suggesting that current European design guidelines, which predict that the system will reach an equilibrium hydraulic conductivity of 86 md1, do not adequately describe the hydrology of mature systems.

A technique for mitigating the effect of the writing-beam profile on fibre Bragg grating fabrication

We propose and demonstrate a pre-compensation mechanism to account for the writing-beam profile which when applied to the design of advanced fibre Bragg gratings helps to achieve a desired design spectral response. We use the example of a complex multi-channel grating as an example to demonstrate the improvement achievable using the pre- compensation and find good agreement between experimental results and numerical calculations.