Effects of lunar cycle and fishing operations on longline-caught pelagic fish: fishing performance, capture time, and survival of fish

Commercial longline fishing data were analyzed and experiments were conducted with gear equipped with hook timers and timedepth recorders in the Réunion Island fishery (21°5ʹS lat., 53°28ʹE long.) to elucidate direct and indirect effects of the lunar cycle and other operational factors that affect catch rates, catch composition, fish behavior, capture time, and fish survival. Logbook data from 1998 through 2000, comprising 2009 sets, indicated that swordfish (Xiphias gladius) catch-per unit of effort (CPUE) increased during the first and last quarter of the lunar phase, whereas albacore (Thunnus alalunga) CPUE was highest during the full moon. Swordfish were caught rapidly after the longline was set and, like bigeye tuna (Thunnus obesus), they were caught during days characterized by a weak lunar illumination—mainly during low tide. We found a significant but very low influence of chemical lightsticks on CPUE and catch composition. At the time the longline was retrieved, six of the 11 species in the study had >40% survival. Hook timers indicated that only 8.4% of the swordfish were alive after 8 hours of capture, and two shark species (blue shark [Prionace glauca] and oceanic whitetip shark [Carcharhinus longimanus]) showed a greater resilience to capture: 29.3% and 23.5% were alive after 8 hours, respectively. Our results have implications for current fishing practices and we comment on the possibilities of modifying fishing strategies in order to reduce operational costs, bycatch, loss of target fish at sea, and detrimental impacts on the environment.

Waste minimisation in fishing operations

Sources of wastes in fishing operations mainly include bycatch discards; processing wastes where catch is processed onboard; plastic wastes due to abandoned, lost and discarded fishing gear; bilges and other wastes from the vessel operations. Fishing systems in general have an associated catch of nontargeted organisms known as bycatch. Non-selective fishing gear that is not modified or equipped to exclude non-targeted organisms, may take a significant quantity of bycatch of non-targeted finfish, juvenile fish, benthic animals, marine mammals, marine birds and vulnerable or endangered species that are often discarded. Average annual global discards, has been estimated to be 7.3 million t, based on a weighted discard rate of 8%, during 1992-2001 period. Trawl fisheries for shrimp and demersal finfish account for over 50% of the total estimated global discards. Plastic materials are extensively used in fisheries, owing to their durability and other desirable properties, contributing to the efficiency and catchability of the fishing gear. However, plastics biodegrade at an extremely slow rate compared to other organic materials. Abandoned, lost or otherwise discarded fishing gear (ALDFG) and related marine debris have been recognized as a critical problem in the marine environment and for living marine resources. Prevention of excess fishing capacity by appropriate management measures could lead to enormous savings in terms of fuel consumption, emissions and bycatch discards from the excess fishing fleet, capital and operational investments and labour deployment in capture fisheries, with significant economic gains. In this paper, wastes originating from fishing operations are reviewed, along with their environmental impacts and possible mitigation measures

Energy analysis of the ring seine operations, off Cochin, Kerala

Ring seines are lightly constructed purse seines adapted for operation in the traditional sector. Fish production and energy requirement in the ring seine operations, off Cochin, Kerala, India are discussed in this paper, based on data collected during 1997- 1998. The results reflect the Gross Energy Requirement (GER) situation that existed during 1997-1998. Mean catch per ring seiner per year worked out to be 211.9 t of which sardines (Sardinella spp.) constituted 44.3%, followed by Indian mackerel (Rastrelliger kanagurta) 29.7%, carangids 11.4%, penaeid prawns 2.2%, pomfrets 1.1% and miscellaneous fish 11.3%. Total energy inputs into the ring seine operations were estimated to be 1300.8 GJ. Output by way of fish production was determined to be 931.85 GJ. GER is the sum of all non-renewable energy resources consumed in making available a product or service and is a measure of intensity of non-renewable resource use. GER per tonne of fish landed by ring seiners was estimated to be 6.14. Among the operational inputs, kerosene constituted 73.4% of the GER, followed by petrol (12.7%), diesel (6.7%) and lubricating oil (2.4%). Fishing gear contributed 3.8%, engine 0.8% and fishing craft 0.3% of the GER. Energy ratio for ring seining was 0.72 and energy intensity 1.40.

Trawling Operations and South African (Cape) Fur Seals, Arctocephalus pusillus pusillus

South African (Cape) fur seals, Arctocephalus pusillus pusillus, interact with the South African trawl fisheries-offshore demersal, inshore demersal, and midwater fisheries. These interactions take thef ollowing forms: Seals take or damage netted fish, on particular vessels they become caught in the propeller, seals drown in the nets, live seals come aboard and may be killed. Except in specific cases of seals damaging particular trawler propellers, interactions result in little cost to the offshore and midwater trawl fisheries. For the inshore fishery, seals damage fish in the net at an estimated cost in excess of R69, 728 (US$18,827) per year, but this is negligible (0.3%) in terms ofthe value of the fishery. Seal mortality is mainly caused by drowning in trawl nets and ranges from 2,524 to 3,636 seals of both sexes per year. Between 312 and 567 seals are deliberately killed annually, but this most likely takes place only when caught and they enter the area below deck, where they are difficult to remove, and pose a potential threat to crew safety. Overall, seal mortality during trawling operations is negligible (0.4-0.6%) in terms of the feeding population of seals in South Africa.

Gestão de resíduos de poda: estudo de caso da Fundação Parques e Jardins do Município do Rio de Janeiro.

A partir do consenso já existente, de que o desenvolvimento urbano é responsável, em parte, pelo desequilíbrio ambiental predominante nas cidades mais populosas, nas quais a administração dos resíduos gerados torna-se um grande desafio, este estudo foi realizado com a finalidade de desenvolver um modelo de gerenciamento para os resíduos de poda de árvores de espaços públicos, visando a utilização do material podado, considerado de boa qualidade, o que minimizaria a disposição de resíduos em aterros sanitários. Para tanto, foi desenvolvido um modelo diferenciado do ponto de vista de legal, gerencial, tecnológico e econômico, que pudesse servir de base à pesquisa e gerar estratégias para beneficiar o meio ambiente. A Unidade de Conservação, que pertence à Fundação Parques e Jardins da Prefeitura da Cidade do Rio de Janeiro, localizada na Taquara, foi analisada no Estudo de Caso. As espécies arbóreas que produzem maior volume de poda nessa seção foram selecionadas de modo que fosse possível o seu aproveitamento econômico-ecológico. Concluiu-se que há uma inviabilidade para segregação dos resíduos de poda por parte da Fundação Parques e Jardins e que os mesmos poderiam ser transferidos diretamente para o aterro receptor, em fase de encerramento de atividades, sem custos excedentes. Foi feita uma apreciação especial do Centro de Tratamento de Resíduos Sólidos de Gericinó, por ser grande receptor dos resíduos produzidos nas operações de manejo da área em evidência. Foi elaborada a proposta de criação de uma Usina Verde nas áreas já desativadas do aterro, como forma complementar ao processo de revitalização da área aterrada após o término de suas atividades. Esta ação contemplaria a região com um bosque, onde seriam absorvidos todos os produtos dos resíduos de poda. Haveria, também, a probabilidade de utilização operacional dos catadores nas etapas de obtenção de compostos orgânicos, cobertura morta e equipamentos paisagísticos entre outros.

Gross energy requirement in fishing operations

Energy is a key input into the fish harvesting process. Efficient use of energy helps in reducing operational costs and environmental impact, while increasing profits. Energy optimisation is an important aspect of responsible fishing as enunciated in the Code of Conduct for Responsible Fisheries. Gross Energy Requirement (GER) is the sum of all non-renewable energy resources consumed in making available a product or service and is expressed in energy units per physical unit of product or service delivered. GER is a measure of intensity of non-renewable resource use and it reflects the amount of depletion of earth’s inherited store of non-renewable energy in order to create and make available a product or service. In this study, GER in fish harvesting up to the point of landing is estimated in selected fish harvesting systems in the small-mechanised sectors of Indian fisheries and compared with reported results from selected non mechanised and motorised fishing systems to reflect the situation during 1997-1998. Among the fish harvesting systems studied, GER t fish-1 ranged from 5.54 and 5.91 GJ, respectively, for wooden and steel purse seiners powered by 156 hp engines; 6.40 GJ for wooden purse seiner with 235 hp engine; 25.18 GJ for mechanised gillnet/line fishing vessel with 89 hp engines; to 31.40 and 36.97 GJ, respectively, for wooden and steel trawlers powered by 99-106 hp engines.

Assessing the responsiveness of existing production operations

Production responsiveness refers to the ability of a production system to achieve its operational goals in the presence of supplier, internal and customer disturbances, where disturbances are those sources of change which occur independently of the system's intentions. A set of audit tools for assessing the responsiveness of production operations is being prepared as part of an EPSRC funded investigation. These tools are based on the idea that the ability to respond is linked to: the nature of the disturbances or changes requiring a response; their impact on production goals; and the inherent response capabilities of the operation. These response capabilities include information gathering and processing (to detect disturbances and production conditions), decision processes (which initiate system responses to disturbances) and various types of process flexibilities and buffers (which provide the physical means of dealing with disturbances). The paper discusses concepts and issues associated with production responsiveness, describes the audit tools that have been developed and illustrates their use in the context of a steel manufacturing plant.