Redesign av facktidskriften Ingenjören

This degree project contains a theoretical and a practical part about magazine design. Literature aboutthe subject’s typography and magazine design has been studied and put into practice on the professionaljournal Ingenjören. Besides of that a study about the history of magazine typography for the lastfifty years has been done.Typography and other design factors are important for the magazine to be readable and gives at thesame time the magazine an identity of its own, which has become more and more important throughoutthe last decades.The result of this degree project is a new design for Ingenjören, a design that agrees more with howthe journal want to be considered. A new template, a dummy and a manual have been produced. A decisionof a board meeting of Ingenjörsförbundet in September is now what remains for the new design tobecome a reality.

Kartläggning av plastkorkar och förslag till förbättringar för den australiensiska marknaden

The project Design analysis and proposals of plastic screw caps in Australia was performed at Högskolan Dalarna incooperation with University of Western Sydney, Australia. The Swedish company Tetra Pak, in Lund, were assigner forthe project that was performed 2006-2007. The commission was to do a survey about the packages for non-carbonateddrinks in Australia. The bottles had to be plastic, able to open in one step and with focus on the caps.The project has result in design analysis and a new proposal of a plastic screw cap for the Australian market. Sixbottles were choosen and they were all testet on 20 consumers each with a Likert-scale test. The result from the test andthe survey underlied the work with a proposal of a new design. The most important qualities for a optimal opening is:a tamper that is easy to break and also guarantee that is not been opened before, wide and soft grip, ergonomics, easyto close and that is good looking.

Redesign av Vagabonds guideboksserieThe travelguides of Vagabond - Redesign

Todays travel trends go towards independence and self planning. If you need advice or help when performing your trip, there are several different series of guidebooks on the market and one of these series comes from the travel magazine Vagabond. This degree project concerns the redesigning of the travelguides of Vagabond, or to be precise: their cityguide over Istanbul. The purpose of the new design is to assure the resemblance between the guidebook and the magazine, as wanted by the Art Director of Vagabond Angelica Zander.Prior to the redesigning process preliminary studies that make up the fundamental ideas were made. Three other big titles of guidebooks on the market were analyzed, and in addition a great deal of focus – considering the final purpose – was put on the concept of magazine design. Some color psychology has also been studied to make out what a difference color makes in printed media and what power color can contribute with, when delivering the message. Finally redesign as a concept has been investigated to clarify why the way of expression should be renewed from time to time.The result is presented as spread examples from the cityguide over Istanbul. The new design is applied on the existing content and the result is supposed to appear as a miniature magazine.

Grafisk profilering som en del avvarumärkesarbetet

A strong brand can help a company to be easier to recognize and be remembered by their customers. Part of branding is to create a visual appearance which is called a graphic profile and contains information on for instance a logo, colours or typography.The objective of this thesis was to create a graphic profile for Stjørdal Tannhelsesenter that could serve as a base for a brand work in the future. It was important to analyze how the clinic wants to be perceived and how it is perceived today. The methods used to carry out this study were questionnaires, researches and a focus group.The work resulted in the generation of a graphic profile that included a new logo, colours, decorative elements, fonts, templates for stationery, business card / badge, imagery, and examples of some publications.According to the test which was made to examine the results of the project showed that I was successful and that the new design meets all the requests from the previous questionnaires.

Seven stories: location based story-delivery system

Location aware content-based experiences have a substantial tradition in HCI, several projects over the last two decades have explored the association of digital media to specific locations or objects. However, a large portion of the literature has little focus on the creative side of designing of the experience and on the iterative process of user evaluations. In this thesis we present two iterations in the design and evaluation of a location based story delivery system (LBSDS), inspired by local folklore and oral storytelling in Madeira. We started by testing an already existing location based story platform, PlaceWear, with short multimedia clips that recounted local traditions and folktales, to this experience we called iLand. An initial evaluation of iLand, was conducted; we shadowed users during the experience and then they responded to a questionnaire. By analyzing the evaluation results we uncovered several issues that informed the redesign of the system itself as well as part of the story content. The outcome of this re design was the 7Stories experience. In the new experience we performed the integration of visual markers in the interface and the framing of the fragmented story content through the literary technique of the narrator. This was done aiming to improving the connection of the audience to the physical context where the experience is delivered. The 7Stories experience was evaluated following a similar methodology to the iLand evaluation but the user’s experience resulted considerably different; because of the same setting for the experience in both versions and the constancy of the most of the content across the two versions we were able to assess the specific effect of the new design and discuss its strengths and shortcomings. Although we did not run a formal and strict comparative test between the two evaluations, it is evident from the collected data how the specific design changes to our LBSDS influenced the user experience.

Are cutout handles used when available in real occupational settings? Description of grips and upper extremities movements during industrial box handling

In order to achieve better postures and decrease musculoskeletal risks adequate design of hand/box couplings for manual materials handling (MMH) are still needed. No studies evaluating upper limb movement thorough direct measurements during box handling in workplace were identified in the literature. In this study we describe the types of grip and movements adopted by ten workers when handling redesigned boxes with cutout handles between different heights on industrial pallets. The new handles were used by 90% of the workers through different types of grip. Electrogoniometric measurements showed relatively safe forearm and wrist movements, although elbow inadequate range of movement was recorded. Despite the good acceptance of the cutout by workers, the new design requires extra internal space in the boxes reducing applications for this alternative of box.

Aperfeiçoamento no projeto de um protótipo de misturador-decantador à inversão de fases visando aplicação na indústria do petróleo

In the oil industry the mixture oil/water occurs in the operations of production, transportation and refining, as well as during the use of its derivatives. The amount of water produced associated with the oil varies and can reach values of 90% in volume in the case of mature phase of the production fields. The present work deals with the development of new design of the Mixer Settler based on Phase Inversion (MDIF) in a laboratory scale. We envisage this application in industrial scale so the phases of project, construction and operation are considered. The modifications most significant, in comparison with the original prototype, include the materials of construction and the substitution of the equipment used in the mixing stage of the process. It was tested the viability of substitution of the original system of mechanical mixing by a static mixer. A statistical treatment by means of an experimental design of composed central type was used in order to evaluate the behavior of the main variables of the separation process as function of the efficiency of separation for the new device. This procedure is useful to delimit an optimal region of operation with the equipment. The variables of process considered on the experimental design were: oil concentration in the feeding water (mg/L); Total volumetric flow rate (L/h); Ratio organic/water on volumetric basis (O/A). The separation efficiency is calculated by comparison of the content of oil and greases in the inlet and outlet of the equipment. For determination of TOG (Total Oil and Grease), the method used was based in the absorption of radiation in the infra-red region. The equipment used for these determinations was InfraCal® TOG/TPH Model HATR-T2 of the Wilks Enterprise, Incorporation. It´s important to stand out that this method of measure has being used by PETROBRAS S.A. Results of global efficiency of separation oil/water varied from 75.3 to 97.7% for contaminated waters containing up to 1664,1 mg/L of oil. By means of tests carried out with a real sample of contaminated water supplied by PETROBRAS we have got an effluent specified in terms of the legal standards required for discharging. Thus, the new design of equipment constitutes a real alternative for the conventional systems of treatment of produced water in the oil industry

Estudo da hidrodinâmica de um novo separador líquido-líquido: aplicação ao sistema óleo-bruto/água produzida

This work aims to use a different hydrodynamic condition applied to a new design of mixer-settler on treating wastewater produced by petroleum industry, called MDIF (Misturador-Decantador à Inversão de Fases/ Mixer-Settler based on Phase Inversion MSPI). The use of this different hydrodynamic behaviour is possible due to vertical disposition of the device and the principle of Phase Inversion that controls the MDIF, providing the generation (creation) of a cascade of drops, into an organic layer, that works as micro-decanters, thus making possible the formation of a bed of non-coalesced drops, called Bed Formation . The use of this new hydrodynamics condition allows to increase the residence time of the oil carrier drops, into an organic layer, and the device can treat a greater volume of wastewater. In view of to get this condition it is necessary to operate at high throughput (58,6 m3.m-2.h-1). By results, the condition of Bed Formation is the best one to be used when MSPI operates with throughput up to 58,6 m3.m-2.h-1. The results using the condition of Bed Formation show that increasing the height of the bed of non-coalesced drops and/or decreasing the volumetric ratio (O/A) an increase of the separation efficiency is detected

Projeto e Operação em Escala Semi-Industrial de um Equipamento para Tratamento de Águas Produzidas na Indústria do Petróleo Utilizando Nova Tecnologia: misturador-decantador à inversão de fases - MDIF

The aim of this work is to use a new technology in the treatment of produced wastewaters from oil industry. An unit for treat produced waters called UTMDIF, was designed, installed and operated in an industrial plant for treatment of effluents from oil industry. This unit operates by means of the method of separation of phase inversion and can become a promising alternative to solve the problem of oil/water separation. This method constitutes the basis of the working of a new design of mixersettler of vertical configuration which occupies small surface area. The last characteristic becomes specially important when there is limitation on the lay-out of the plant, for example, over maritime platforms to explore oil. This equipment in a semi-industrial scale treats produced wastewaters contaminated with oil at low concentrations (ranging from 30 to 150 mg/L) and throughputs of 320 m3/d (47,4 m3 m-2 h-1). Good results were obtained in oil/water separation which leads to the necessary specification to discharge those wastewaters. Besides, the non dependence of the efficiency of separation in spite of the salinity of the medium becomes the equipment an attractive new technology to treat wastewaters containing oil at low concentrations

Comparação entre planejamento estatístico experimental e análise dimensional em operações de mistura e separação para sistema óleo-água

This work aims to determine a better methodology to help predicting some operational parameters to a new design of mixer-settler on treating wastewater produced by petroleum industry, called MDIF (Misturador-Decantador à Inversão de Fases/ Mixer-Settler based on Phase Inversion MSPI). The data from this research were obtained from the wastewater treatment unit, called MSPI-TU, installed on a wastewater treatment plant (WTP) of PETROBRAS/UO-RNCE. The importance in determining the better methodology to predict the results of separation and extraction efficiency of the equipment, contributes significantly to determine the optimum operating variables for the control of the unit. The study was based on a comparison among the experimental efficiency (E) obtained by operating MSPI-TU, the efficiency obtained by experimental design equation (Eplan) from the software Statistica Experimental Design® (version 7.0), and the other obtained from a modeling equation based on a dimensional analysis (Ecalc). The results shows that the experimental design equation gives a good prediction of the unit efficiencies with better data reliability, regarding to the condition before a run operation. The average deviation between the proposed by statistic planning model equation and experimental data was 0.13%. On the other hand, the efficiency calculated by the equation which represents the dimensional analysis, may result on important relative deviations (up 70%). Thus, the experimental design is confirmed as a reliable tool, with regard the experimental data processing of the MSPI-TU

Development of an instrumentation system embedded on FPGA for real time measurement of mechanical vibrations in rotating machinery

The real-time monitoring of events in an industrial plant is vital, to monitor the actual conditions of operation of the machinery responsible for the manufacturing process. A predictive maintenance program includes condition monitoring of the rotating machinery, to anticipate possible conditions of failure. To increase the operational reliability it is thus necessary an efficient tool to analyze and monitor the equipments, in real-time, and enabling the detection of e.g. incipient faults in bearings. To fulfill these requirements some innovations have become frequent, namely the inclusion of vibration sensors or stator current sensors. These innovations enable the development of new design methodologies that take into account the ease of future modifications, upgrades, and replacement of the monitored machine, as well as expansion of the monitoring system. This paper presents the development, implementation and testing of an instrument for vibration monitoring, as a possible solution to embed in industrial environment. The digital control system is based on an FPGA, and its configuration with an open hardware design tool is described. Special focus is given to the area of fault detection in rolling bearings. © 2012 IEEE.

Evaluation of reusable cardboard box designs: Biomechanical and perceptual aspects

Reusable cardboard boxes can be ergonomically designed for internal transportation of dry products in industrial settings. In this study we compared the effects of handling a regular commercial box and two cardboard prototypes on upper limb postures through the evaluation of movements, myoelectrical activity, perceived grip acceptability and capacity for reuse. The ergonomic designs provided a more acceptable grip, safer wrist and elbow movements and lower wrist extensors and biceps activity. Biomechanical disadvantages were observed only for one of the prototypes when handling to high surface. The prototypes were durable and suitable for extensive reuse (more than 2000 handlings) in internal industrial transportation. Despite being slightly more expensive than regular cardboard, the prototypes showed good cost-benefit considering their high durability. Relevance to industry: Cardboard boxes can be efficiently redesigned for allowing safer upper limb movements and lower muscle workload in manual materials handling. New designs can also be extensively reused for internal industrial transportation with good cost-benefit. © 2012 Elsevier B.V.

Experimental results and thermodynamic analysis of a natural gas small scale cogeneration plant for power and refrigeration purposes

In this work, experimental results are reported for a small scale cogeneration plant for power and refrigeration purposes. The plant includes a natural gas microturbine and an ammonia/water absorption chiller fired by steam. The system was tested under different turbine loads, steam pressures and chiller outlet temperatures. An evaluation based on the 1st and 2nd Laws of Thermodynamics was also performed. For the ambient temperature around 24°C and microturbine at full load, the plant is able to provide 19 kW of saturated steam at 5.3 bar (161 °C), corresponding to 9.2 kW of refrigeration at -5 °C (COP = 0.44). From a 2nd law point-of-view, it was found that there is an optimal chiller outlet temperature that maximizes the chiller exergetic efficiency. As expected, the microturbine presented the highest irreversibilities, followed by the absorption chiller and the HRSG. In order to reduce the plant exergy destruction, it is recommended a new design for the HRSG and a new insulation for the exhaust pipe. © 2013 Elsevier Ltd. All rights reserved.

Controle automático com estrutura variável utilizando sistemas ERP e LMI

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modelagem e controle de sistemas fuzzy Takagi-Sugeno

Pós-graduação em Engenharia Elétrica - FEIS