Micronutrientes em Pinus caribaea morelet I. Efeitos da omissão sobre o desenvolvimento e sintomas de carência

Com o objetivo de determinar os sintomas visuais de carência e os efeitos da omissão de micronutrientes na produção de materia seca e crescimento em altura de mudas de Pinus caribaea var. hondurensis, Pinus caribaea var. bahamensis e Pinus caribea var. cavibaea realizou-se um experimente com vasos, em casa de vegetação, em Piracicaba,SP. Foram empregados os-tratamentos: completo, com omissão de boro, com omissão de ferro, com omissão de manganês. e com omissão de zinco. Usou-se silica lavada como substrato, irrigando-se as plantas duas vezes ao dia com as soluções correspondentes. Após o estabelecimento dos sintomas de carência as plantas foram colhidas e separadas em acículas, ramos e raízes, secas a 75°C e pesadas. Descreveram-se os sintomas de carência, sendo bastante característicos os de Fe e B para as três variedades e os de cobre para P. caribaea var. hondurensis e P. caribaea var. bahamensis. A deficiência de cobre reduziu severamente a produção de matéria seca de P. caribaea var. bahamensis e P. caribaea var. caribaea. A deficiência de boro reduziu a produção de matéria seca de Pinus caribaea var. caribaea e a de ferro a de P. caribaea var. hondurensis. A deficiência de boro limitou preponderantemente o crescimento em altura de P. caribaea var. hondurensis.

Biopsia hepática em cães: relação entre qualidade da amostra e grau de conclusão do diagnóstico

O presente estudo objetivou analisar a qualidade do diagnóstico de biopsias colhidas com agulhas tipo aspirativa e cortante, comparando-as ao exame histológico post-mortem do fígado de cães portadores de afecções hepáticas. Foram utilizados 60 cães, sem distinção de sexo, raça ou idade. As biopsias foram procedidas com agulhas tipo MenghiniÒ (de natureza aspirativa) e agulhas tipo Tru-CutÒ (de natureza cortante). As biopsias foram colhidas utilizando-se a técnica percutânea transabdominal. O diagnóstico referente à agulha tipo Tru-CutÒ não diferiu do diagnóstico referente à agulha tipo MenghiniÒ. O referente à agulha tipo Tru-CutÒ foi o que apresentou maior índice de concordância, 88,3% de acertos. A agulha tipo Tru-CutÒ apresentou excelentes resultados independente da natureza das lesões, enquanto que a agulha tipo MenghiniÒ falhou nos casos de fibrose.

Physicochemical properties and morphology of spongolite from Mato Grosso do Sul (Brazil)

The physicochemical properties and morphology of spongolite, a fibrous hollow material from Mato Grosso do Sul State (Brazil) have been studied. The results of thermal analysis, scanning electron microscopy (SEM), X-ray diffraction and NMR spectroscopy indicated that external and internal surfaces of silica spicules are covered by silica gel layers. The water evolved in the range 120-350degreesC is the result of silanol groups condensation to siloxane bonds. Total homogenization of the needles is achieved by heating spongolite over 900degreesC. This mineral may be considered as a natural composite material containing surface-immobilized reactive species. The presence of active silica gel layers opens the possibilities of attaching functional groups to spongolite surface. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Phosphate functionalization of spongiolite surface

Spongiolite from Mato Grosso do Sul (Brazil), natural inorganic composite constituted of silica needles, was treated with concentrated phosphoric acid at high temperatures. Superficial coating of the needles was proved to be constituted of silicon diphosphate, a compound offering six-coordinated silicon sites. Owing to the affinity of three charged ions to phosphate groups, this coating acts as specific adsorbent for the rare earth elements which prefer octahedral coordination (starting from samarium, yttrium included). The uptake of lanthanum and neodymium are significantly lower due to different coordination tendencies. Lanthanide fixation upon silica with PO4 groups anchored on its surface may be useful in the manufacturing of special phosphate-silicate glasses. (C) 2003 Elsevier B.V. All rights reserved.

BIOSENSORS FOR GLUCOSE NEEDLE-SHAPED FOR IN-VIVO MONITORING

Different procedures for obtaining a needle biosensor for the determination of glucose to be inserted subcutaneously in vivo, have been compared. Platinum wires with a diameter of 75 mum, teflon-coated were inserted in hypodermic needles and fixed with a two-component epoxy resin. Using a dip-coating procedure, several layers were deposited on electrodes. The first coating was cellulose acetate, the second was immobilized glucose oxidase (GOD) mixed with bovine serum albumin (BSA) and glutaraldheyde, the third coating was a polyurethane coating obtained with commercially available products. A large number of electrodes have been tried and statistically evaluated but they seem to be affected by poor reproducibility evidenced by a large spreading in successive calibration curves. Then, the polyurethane coating has been replaced by a thin polycarbonate membrane salinized and fixed on the tip of the needle. Reproducible results were achieved and first results of in vivo measurements on rabbits are reported.

Highly swollen liquid crystals as new reactors for the synthesis of nanomaterials

Synthesis and self-assembly of nanomaterials can be controlled by the properties of soft matter. on one hand, dedicated nanoreactors such as reverse microemulsions or miniemulsions can be designed. on the other hand, direct shape control can be provided by the topology of liquid crystals that confine the reacting medium within a specific geometry. In the first case, the preparation of micro- or miniemulsions generally requires energetic mechanical stirring. The second approach uses thermodynamically stable systems, but it remains usually limited to binary (water + surfactant) systems. We report the preparation of different families of materials in highly ordered quaternary mediums that exhibit a liquid crystal structure with a high cell parameter. They were prepared with the proper ratios of salted water, nonpolar solvent, surfactant. and cosurfactants that form spontaneously swollen hexagonal phases. These swollen liquid crystals can be prepared from all classes of surfactants (cationic, anionic, and nonionic). They contain a regular network of parallel cylinders, whose diameters can be swollen with a nonpolar solvent, that are regularly spaced in a continuous aqueous salt solution. We demonstrate in the present report that both aqueous and organic phases can be used as nanoreactors for the preparation of materials. This property is illustrated by various examples such as the synthesis of platinum nanorods prepared in the aqueous phase or zirconia needles or the photo- or gamma-ray-induced polymerization of polydiacetylene in the organic phase. In all cases, materials can be easily extracted and their final shapes are directed by the structure-directing effect imposed by the liquid crystal.

Application of impedance spectroscopy to evaluate the effect of different setting accelerators on the developed microstructures of calcium phosphate cements

The main goal of the present study was to evaluate the effect of different setting accelerator agents on the developed microstructures of calcium phosphate cements (CPCs) by employing the impedance spectroscopy (IS) technique. Six compositions of CPCs were prepared from mixtures of commercial dicalcium phosphate anhydrous (DCPA) and synthesized tetracalcium phosphate (TTCP) as the solid phases. Two TTCP/DCPA molar ratios (1/1 and 1/2) and three liquid phases (aqueous solutions of Na(2)HPO(4), tartaric acid (TA) and oxalic acid (OA), 5% volume fraction) were employed. Initial (I) and final (F) setting times of the cement pastes were determined with Gillmore needles (ASTM standard C266-99). The hardened samples were characterized by X-ray powder diffraction (XRD), Fourier transformed infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and apparent density measurements. The IS technique was employed as a non-destructive tool to obtain information related to porosity, tortuosity and homogeneity of the cement microstructures. The formulation prepared from a TTCP/DCPA equimolar mixture and OA as the liquid phase presented the shortest I and F (12 and 20 min, respectively) in comparison to the other studied systems. XRD analyses revealed the formation of low-crystallinity hydroxyapatite (HA) (as the main phase) as well as the presence of little amounts of unreacted DCPA and TTCP after 24 h hardening in 100% relative humidity. This was related to the proposed mechanisms of dissolution of the reactants. The bands observed by FTIR allowed identifying the presence of calcium tartrate and calcium oxalate in the samples prepared from TA and OA, in addition to the characteristic bands of HA. High degree of entanglement of the formed crystals was observed by SEM in samples containing OA. SEM images were also correlated to the apparent densities of the hardened cements. Changes in porosity, tortuosity and microstructural homogeneity were determined in all samples, from IS results, when the TTCP/DCPA ratio was changed from 1/1 to 1/2. The cement formulated from an equimolar mixture of TTCP/DCPA and OA as the liquid phase presented setting times, degree of conversion to low-crystallinity HA and microstructural features suitable to be used as potential bone cement in clinical applications. The IS technique was shown to be a very sensitive and non-destructive tool to relate the paste composition to the developed microstructures. This approach could be very useful to develop calcium phosphate bone cements for specific clinical demands.

the human hand. I. Movements of the index ANALYSE ELECTROMYOGRAPHIQUE DU PREMIER MUSCLE INTEROSSEUX DORSAL DE LA MAIN HUMAINE

An electromyographic study of the musculus interosseus dorsalis was performed on the right hand of 25 young adult male right-handed volunteers. The electrodes, simple coaxial needles, were implanted one at the ulnar head and the other at the radial head of the muscle. The muscles were analyzed during free movements of the index and against resistance. The same movements were done in four different positions of the fore-arm and hand, without variation in the results for each one of the movements. There was no significant difference between the activities of the ulnar head and radial head. During freely performed movements, muscle activity was recorded only during abduction. During movements against resistance, muscle activity was completely nil only during adduction; during the remaining movements, however, moderate (2+), strong (3+) and very strong activity (4+) was recorded.

Laryngeal electromyography: Technical features

Laryngeal Electromyography (LEMG) is an auxiliary diagnostic method used for the comprehension and diagnosis of different neurological diseases that compromise laryngeal function. The most common LEMG technique is the percutaneous insertion of needle electrodes guided by surface anatomical references. We describe techniques for inserting needle electrodes into the tireoaritenoideus (TA), cricotireoideus (CT), cricoaritenoideus lateralis (CAL) and cricoaritenoideus posterioris (CAP) muscles; these are used at UNICAMP laryngology ambulatory; we discuss difficulties found and their proposed solutions. All patients were submitted to otorhinolaryngological, phonoaudiological and laryngeal endoscopy before LEMG. The CAP approach, by digital rotation of the thyroid cartilage was found to be the most difficult, followed by the CAL approach. TA and CT approaches gave no major problems, except with some older and obese patients. A significant complication of the TA approach via thyroid cartilage was a hematoma in one patient which partially obstructed the laryngeal lumen.

Osteogenesis-inducing calcium phosphate nanoparticle precursors applied to titanium surfaces

This study investigated the effects of the morphology and physicochemical properties of calcium phosphate (CaP) nanoparticles on osteogenesis. Two types of CaP nanoparticles were compared, namely amorphous calcium phosphate (ACP) nano-spheres (diameter: 9-13 nm) and poorly crystalline apatite (PCA) nano-needles (30-50 nm x 2-4 nm) that closely resemble bone apatite. CaP particles were spin-coated onto titanium discs and implants; they were evaluated in cultured mouse calvarial osteoblasts, as well as after implantation in rabbit femurs. A significant dependence of CaP coatings was observed in osteoblast-related gene expression (Runx2, Col1a1 and Spp1). Specifically, the PCA group presented an up-regulation of the osteospecific genes, while the ACP group suppressed the Runx2 and Col1a1 expression when compared to blank titanium substrates. Both the ACP and PCA groups presented a more than three-fold increase of calcium deposition, as suggested by Alizarin red staining. The removal torque results implied a slight tendency in favour of the PCA group. Different forms of CaP nanostructures presented different biologic differences; the obtained information can be used to optimize surface coatings on biomaterials. © 2013 IOP Publishing Ltd.

Diagnóstico comparativo entre a histopatologia e citologia por capilaridade com agulha de insulina nas neoplasias mamárias caninas

Pós-graduação em Cirurgia Veterinária - FCAV

Perfil bacteriológico de biópsia pulmonar e lavado traqueobrônquico de equinos sadios mantidos em sistema extensivo e estabulado

Pós-graduação em Medicina Veterinária - FMVZ

Evidências clínico-patológicas de ovinos intoxicados experimentalmente com sementes de Crotalaria spectabilis (Leg.papilionoidea)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Técnica de biopsia renal de janela modificada com exteriorização do rim em gatos. Estudo das complicações clínicas, alterações laboratoriais e qualidade das amostras obtidas

Pós-graduação em Medicina Veterinária - FMVZ

Crescimento de fibras de zircônia preparadas pela rota sol-gel a partir de moldes de cristal líquido

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)