Estudo, desenvolvimento e caracterização de revestimentos do tipo super-rede de dureza

Nos últimos 10 anos, o desenvolvimento de técnicas de deposição e seus equipamentos permitiu o surgimento de novos tipos de filmes finos, principalmente voltados para aplicações mecânicas e tribológicas, que são multicamadas nanoestruturadas. Esses revestimentos apresentam propriedades que não são diretamente ligadas as propriedades das camadas individuais de cada material, geralmente apresentando valores de dureza extremamente elevados relacionados a um período de modulação crítico ΛC. Esses filmes demonstram um claro potencial para aplicações tribológicas mesmo com o seu comportamento de dureza ainda não completamente esclarecido. O objetivo deste trabalho é produzir multicamadas nanoestruturadas do tipo metal / nitreto pela técnica de magnetron sputtering usando Nb, Ta e TiN, visando obter uma estrutura com valores de dureza extremamente elevados, tipicamente observados em revestimentos do tipo super-redes. A estrutura periódica dos revestimentos com baixo valor de Λ (< 10 nm) foi caracterizada por XRR (Refletividade por Difração de Raios X) e por RBS (Espectrometria por Retroespalhamento Rutherford) para os valores altos de Λ. As propriedades mecânicas dos revestimentos foram avaliadas por testes instrumentados de dureza usando um equipamento Fischerscope HV100. Todas as multicamadas foram produzidas com sucesso e apresentaram uma periodicidade bem definida, o que foi confirmado pelos resultados de RBS e XRR. Os valores de dureza medidos apresentaram um comportamento tipicamente observado em superredes com um valor máximo maior que 50 GPa sempre relacionado a uma valor crítico de Λ. O valor ΛC foi 8 nm para as amostras de Nb/TiN e 4 nm para as amostras de Ta/TiN. A razão H/E indicou que o revestimento nanoestruturado mais adequado para aplicações tribológicas foram as multicamadas com maior valor de dureza. Esses resultados mostraram claramente a possibilidade de aplicação industrial destes revestimentos.

A Gagarinita e fases associadas no Granito Madeira (Pitinga, Amazonas)

O trabalho descreve a ocorrência de gagarinita-(Y) das porções mineralizadas de criolita da base do Depósito Criolítico Maciço associado à subfácies albita granito do Granito Madeira (1.8Ma) na jazida de Pitinga (Sn, Nb, Ta e criolita), onde o Y e ETR serão explorados como co-produtos. A gagarinita forma cristais anédricos de até 7mm, intersticiais ou inclusos na criolita, de cristalização anterior à criolita dos bolsões. Todos os cristais apresentam texturas típicas de exsolução, pela primeira vez descritas em fluoretos. Os padrões de exsolução são variados. Os cristais exsolvidos têm até 0,4mm, são incolores, as cores de interferência são de primeira ordem, com birrefringência 0,005-0,007, são U(-), com retardo de 150 a 210nm. A fase exsolvida distribui-se uniformemente em toda a extensão dos grãos da gagarinita-(Y), inclusive na borda; segue uma ou mais orientações preferenciais e tem dimensões semelhantes. Podem ocorrer coalescência de diferentes cristais exsolvidos, resultando em strings e stringlets. Mais raramente, a orientação é menos evidente e as dimensões dos cristais são mais variáveis No contato gagarinita/criolita, reconhece-se a formação da fase exsolvida como anterior à cristalização da criolita. A análise modal de uma população de grãos de gagarinita-(Y) com os diversos padrões texturais de exsolução fornece o valor médio de 25,8% (considerado estatisticamente representativo) de proporção de fase exsolvida em relação à fase hospedeira. Os parâmetros cristalinos da gagarinita-(Y) determinados a partir de análises por DRX são compatíveis com os da literatura. Análises por MSE, FRX e MEV da gagarinita-(Y) mostram uma composição bastante homogênea. A fórmula estrutural média calculada na base de 2(ETR+Y+Ca) é Na0,24Ca0,58Y1,01ETR0,39F5,81. O padrão de ETR normalizado ao condrito é caracterizado por enriquecimento em ETRP e anomalia negativa em Eu. A composição da fase exsolvida obtida por MSE, calculada para um total de cátions igual a 1, é Ce0,53-0,66 La0,09-0,26 Nd0,08-0,26 Sm0,01-0,04 Eu0,01Y0-0,03 F3,3-4,14. Esta fórmula é semelhante à da fluocerita, cujos picos característicos, entretanto, não ocorrem nos difratogramas. O padrão de ETR mostra um fracionamento contínuo dos ETR com empobrecimento em ETRP e discreta anomalia positiva em Eu. A composição da gagarinita inicial foi reconstituída considerando-se as proporções modais das fases hospedeira e exsolvida, obtendo-se Na0,19Ca0,48Y0,83ETR0,69F6,27. O padrão de ETR é plano com anomalia negativa em Eu menos acentuada que na gagarinita hospedeira Antes da exsolução, o sistema mineral comportava-se provavelmente como uma solução sólida com a substituição - + 2ETR3+<=> Na+ + Ca2+ + Y3+ . Formou-se, assim, uma gagarinita inicial excepcionalmente rica em ETRL (cátions relativamente grandes) cuja presença foi compensada por vacâncias, notadamente no sítio de coordenação VI. A diminuição da temperatura desestabilizou a estrutura mineral que exsolveu os cátions de ETR com raio iônico maior que o do Sm. A gagarinita hospedeira preservou os conteúdos de Y, ETRP (com exceção do Sm que se repartiu entre ela e a fase exsolvida) e Na (e Ca), constituindo uma estrutura estável, menos afetada por vacâncias e com um balanço de cargas bastante equilibrado. A fase exsolvida é um fluoreto com razão cátions/flúor= 1/3, correspondendo à composição da fluocerita. Sua estrutura não pôde ser determinada: picos da fluocerita não foram identificados e uma estrutura semelhante à da gagarinita (razão cátions/flúor= 1/2) parece pouco provável. Estudos subseqüentes poderão definir se trata-se de um novo mineral, polimorfo da fluocerita.

O grupo araxá na região sul-sudoeste do estado de goiás

In the S - SW region of Goiás State, Brazil, the Araxá Group is constituted of a metasedimentary sequence containing schistose and gneissic (garnet-biotite-quartz schists, feldspatic garnet-biotite-quartz schists, garnet-biotite-quartz paragneisses, with muscovite and locally amphibole, epidote, kyanite and staurolite. This sequence presents intercalations of metaul-tramafc rocks (serpentinite, actinolite schist, talc schist, chlorite schist), metamafc ones (amphibolite, amphibole schist containing or not garnet, garnet amphibolite) and associated granitic bodies. Chemically, the Araxá Group metasediments present peraluminous composition, showing enrichment in LILE, when compared with HFSE and REE, and displaying negative anomalies of Nb, Ta, Sr, P and Ti. Their chemical composition is that of greywake and the chemical characteristics of the sediments are generated in magmatic arcs. Isotopic data for Sm/Nd - model ages (TDM) between 1,04 - 1,51 and 1,76 - 2,26 Ga - and U/Pb (predominance of zircon with ages < 900 Ma) suggest that these metasediments have Neoproterozoic rocks as the source rocks. Chemical and isotopic characteristics of the studied metasediments suggest that their source are rocks originated in magmatic arcs and that they were deposited in a fore arc basin developed in the margins of Neoproterozoic island arcs.

Influência da dopagem com oxigênio nas propriedades anelásticas e biocompatibilidade de ligas Ti-5%pNb e Ti-10%pNb

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Intrusão Alcalina de Morro Preto (go): Geologia, Petrografia e Geoquímica

A intrusão alcalina de Morro Preto, localizada ao norte da cidade de Piranhas (GO), corresponde a um corpo irregular a subcircular com aproximados 3,34 km2 alojado em gnaisses atribuídos ao Arco Magmático de Goiás. É constituída principalmente por carbonatitos e lamprófiros com graus variados de laterização e silicificação, além de silexitos e, em menor expressão, por sienito ferruginizado e basalto alcalino. Quimicamente mostram baixas concentrações em Cs, K, Na, Rb e altas concentrações em elementos como TR, Nb, Ba, Th e U. Isto aparenta resultar de processos de laterização/silicificação e da formação de fases minerais raras (ou neoformação de fases minerais), como fosfatos com alta concentração de TR e Th, oxi-hidróxidos de Fe, Ba, Mn, e oxi e/ou silico-fosfatos de ETR, Nb, Ta, dentre outros, e a formação de barita. A presença de rochas carbonatíticas com alto P2O5 e o enriquecimento acentuado em TR sugere a possibilidade de mineralizações destes componentes, similar às observadas em outros complexos alcalinos de Goiás e de Minas Gerais, como Catalão e Araxá. A distribuição de elementos menores, traços e TR mostram que as rochas são produtos de alteração de rochas ígneas alcalinas como carbonatitos, lamprófiros e basaltos alcalinos, rochas já enriquecidas em elementos como Th, U, TR (principalmente em ETRL), Nb e Ta. Os teores anormalmente altos são resultado do processo de enriquecimento supérgeno (processos de intemperismo como silicificação e laterização) e/ou alteração hidrotermal com baixa temperatura.

In Vitro Cytotoxicity of a Ti-35Nb-7Zr-5Ta Alloy Doped with Different Oxygen Contents

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ortognaisses peraluminosos associados ao Grupo Araxá na região de Mairipotaba-Prof. Jamil Safady, Goiás

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Geoquímica e geocronologia U-Pb e ­Sm-Nd dos ortognaisses da região de Pontalina (GO), Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ortognaisses peraluminosos associados ao grupo Araxá na região de Rochedo, Goiás

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structure, microstructure, and selected mechanical properties of Ti-Zr-Mo alloys for biomedical applications

New titanium alloys for biomedical applications have been developed primarily with the addition of Nb, Ta, Mo, and Zr, because those elements stabilize the β phase and they don’t cause cytotoxicity in the organism. The objective of this paper is to analyze the effect of molybdenum on the structure, microstructure, and selected mechanical properties of Ti-15Zr-xMo (x = 5, 10, 15, and 20 wt%) alloys. The samples were produced in an arc-melting furnace with inert argon atmosphere, and they were hot-rolled and homogenized. The samples were characterized using chemical, structural, and microstructural analysis. The mechanical analysis was made using Vickers microhardness and Young’s modulus measurements. The compositions of the alloys were sensitive to the molybdenum concentration, indicating the presence of α’+α”+β phases in the Ti-15Zr-5Mo alloy, α”+β in the Ti-15Zr-10Mo alloy, and β phase in the Ti-15Zr-15Mo and Ti-15Zr-20Mo alloys. The mechanical properties showed favorable values for biomedical application in the alloys presenting high hardness and low Young’s modulus compared with CP-Ti.

Petrogenesis of Cenozoic volcanic rocks in the NW sector of the Gharyan volcanic field, Libya

The north-western sector of the Gharyan volcanic field (northern Libya) consists of trachytic-phonolitic domes emplaced between similar to 41 and 38 Ma, and small-volume mafic alkaline volcanic centres (basanites, tephrites. alkali basalts. hawaiites and rare benmoreites) of Middle Miocene-Pliocene age (similar to 12-2 Ma). Two types of trachytes and phonolites have been recognized on the basis of petrography, mineralogy and geochemistry. Type-1 trachytes and phonolites display a smooth spoon-shaped REE pattern without negative Europium anomalies. Type-2 trachytes and phonolites show a remarkable Eu negative anomaly, higher concentration in HFSE (Nb-Ta-Zr-Hf), REE and Ti than Type-1 rocks. The origin of Type-1 trachytes and phonolites is compatible with removal of clinopyroxene, plagioclase, alkali feldspar, amphibole. magnetite and titanite starting from benmoreitic magmas. found in the same outcrops. Type-2 trachytes and phonolites could be the result of extensive fractional crystallization starting from mafic alkaline magma, without removal of titanite. In primitive mantle-normalized diagrams, the mafic rocks (Mg#= 62-68, Cr up to 514 ppm, Ni up to 425 ppm) show peaks at Nb and Ta and troughs at K. These characteristics, coupled with low Sr-87/Sr-86(i) (0.7033-0.7038) and positive epsilon(Nd) (from +4.2 to + 5.3) features typical of the mafic anorogenic magmas of the northern African plate and of HIMU-OIB-like magma in general. The origin of the mafic rocks is compatible from a derivation from low degree partial melting (3-9%) shallow mantle sources in the spinel/gamet facies. placed just below the rigid plate in the uppermost low-velocity zone. The origin of the igneous activity is considered linked to passive lithospheric thinning related to the development of continental rifts like those of Sicily Channel (e.g.. Pantelleria and Linosa) and Sardinia (e.g., Campidano Graben) in the Central-Western Mediterranean Sea. (C) 2012 Elsevier B.V. All rights reserved.

The influence of petrogenetic processes on the composition of Ocean Island Basalts

Ocean Island Basalts (OIB) provide important information on the chemical and physical characteristics of their mantle sources. However, the geochemical composition of a generated magma is significantly affected by partial melting and/or subsequent fractional crystallization processes. In addition, the isotopic composition of an ascending magma may be modified during transport through the oceanic crust. The influence of these different processes on the chemical and isotopic composition of OIB from two different localities, Hawaii and Tubuai in the Pacific Ocean, are investigated here. In a first chapter, the Os-isotope variations in suites of lavas from Kohala Volcano, Hawaii, are examined to constrain the role of melt/crust interactions on the evolution of these lavas. As 187Os/188Os sensitivity to any radiogenic contaminant strongly depend on the Os content in the melt, Os and other PGE variations are investigated first. This study reveals that Os and other PGE behavior change during the Hawaiian magma differentiation. While PGE concentrations are relatively constant in lavas with relatively primitive compositions, all PGE contents strongly decrease in the melt as it evolved through ~ 8% MgO. This likely reflects the sulfur saturation of the Hawaiian magma and the onset of sulfide fractionation at around 8% MgO. Kohala tholeiites with more than 8% MgO and rich in Os have homogeneous 187Os/188Os values likely to represent the mantle signature of Kohala lavas. However, Os isotopic ratios become more radiogenic with decreasing MgO and Os contents in the lavas, which reflects assimilation of local crust material during fractional crystallization processes. Less than 8% upper oceanic crust assimilation could have produced the most radiogenic Os-isotope ratios recorded in the shield lavas. However, these small amounts of upper crust assimilation have only negligible effects on Sr and Nd isotopic ratios and therefore, are not responsible for the Sr and Nd isotopic heterogeneities observed in Kohala lavas. In a second chapter, fractional crystallization and partial melting processes are constrained using major and trace element variations in the same suites of lavas from Kohala Volcano, Hawaii. This inverse modeling approach allows the estimation of most of the trace element composition of the Hawaiian mantle source. The calculated initial trace element pattern shows slight depletion of the concentrations from LREE to the most incompatible elements, which indicates that the incompatible element enrichments described by the Hawaiian melt patterns are entirely produced by partial melting processes. The “Kea trend” signature of lavas from Kohala Volcano is also confirmed, with Kohala lavas having lower Sr/Nd and La/Th ratios than lavas from Mauna Loa Volcano. Finally, the magmatic evolution of Tubuai Island is investigated in a last chapter using the trace element and Sr, Nd, Hf isotopic variations in mafic lava suites. The Sr, Nd and Hf isotopic data are homogeneous and typical for the HIMU-type OIB and confirms the cogenetic nature of the different mafic lavas from Tubuai Island. The trace element patterns show progressive enrichment of incompatible trace elements with increasing alkali content in the lavas, which reflect progressive decrease in the degree of partial melting towards the later volcanic events. In addition, this enrichment of incompatible trace elements is associated with relative depletion of Rb, Ba, K, Nb, Ta and Ti in the lavas, which require the presence of small amount of residual phlogopite and of a Ti-bearing phase (ilmenite or rutile) during formation of the younger analcitic and nephelinitic magmas.

Synthese und Charakterisierung von Oxidchalkogeniden und Bronzen für die Nanostrukturierung

Ausgehend von der Entdeckung der reversiblen Strukturierung mittels Rastersondenmethoden im Phasensystem Na2O/V2O5/P2O5 wurden im Rahmen dieser Arbeit zwei Ansatzpunkte verfolgt. Einerseits sollten mittels der Schmelzflußelektrolyse einige bereits existierende niederdimensionale Molybdänbronzen mit bekannten elektronischen Übergängen in ausreichend großen Kristallen gezüchtet werden, um sie auf ihre Strukturierungseigenschaften hin zu untersuchen. Gleichzeitig sollte durch Variation versucht werden, neue, bisher unbekannte Bronzen oder reduzierte Oxide zu synthetisieren und charakterisieren. Der zweite Schwerpunkt dieser Arbeit lag in der Synthese und Charakterisierung von Oxidchalkogeniden, bestehend aus einem Seltenerdmetall und einem 3d-Metall von Titan bis hin zu den mittleren Übergangsmetallen. Diese Verbindungen können durch die Kombination der jeweiligen Eigenschaften der oxidischen und chalkogeniden Teilstrukturen völlig neue elektronische und/oder magnetische Eigenschaften aufweisen. Mögliche auftretende Phasenübergänge sind wiederum für Strukturierungsversuche interessant. Die zu den Oxidchalkogeniden durchgeführten Untersuchungen ergaben im Phasensystem Ln/Ti/S/O (Ln = Lanthanoide) insgesamt sechs Verbindungen. Zwei von ihnen, La8Ti9S24O4 und Nd20Ti11S44O6, besitzen als gemeinsames Strukturelement tetranukleare [Ti4(u4-S)2(u2-O)4]-Cluster, bestehend aus vier miteinander über gemeinsame Flächen kondensierte TiS4O2-Oktaeder. Die Titanpositionen innerhalb der Cluster sind mit Ti+3-Ionen besetzt. Beide Verbindungen weisen in einem Temperaturbereich zwischen 150 K und 250 K eine deutlich ausgeprägte Hysterese der magnetischen Suszeptibilität auf, die sich im Falle von La8Ti9S24O4 auf einen Jahn-Teller-Übergang zurückführen läßt. Daneben konnte erstmals eine Serie oxidisch/sulfidisch gemischter Ruddlesden-Popper-Verbindungen mit Ln2Ti2S2O5 (Ln = Pr, Nd, Sm) synthetisiert und charakterisiert werden. Titan liegt als vierwertiges Ion in aus TiSO5-Oktaedern gebildeten Perowskit-Doppelschichten vor. Die neunfach koordinierten Positionen sind mit den Seltenerdmetallionen gefüllt, die zwölffach koordinierten Lagen sind unbesetzt. Bei dem sechsten erhaltene Titanoxidsulfid, La4TiS6.5O1.5, handelt es sich um einen Halbleiter mit einer Bandlücke von etwa 2 eV. Weiterhin gelang es, die Serie Ln2M3S2O8 (Ln = La, Ce, Pr, Nd, Sm; M = Nb, Ta) zu synthetisieren und in ihren physikalischen Eigenschaften zu charakterisieren. Es handelt sich ausnahmslos um Halbleiter mit Bandlücken zwischen E=0.125 eV für La2Nb3S2O8 und E=0.222 eV für Pr2Ta3S2O8. Die Struktur der Oxidsulfide Ce2Ta3S2O8, Pr2Ta3S2O8, Nd2Nb3S2O8 sowie Sm2Ta3S2O8 weist im Gegensatz zu den anderen Verbindungen eine Fehlordnung eines der beiden kristallographisch unabhängigen Nb- bzw. Ta-Atome auf. Daraus resultiert eine Symmetrieerniedrigung von Pnma zu Pbam. Der Einsatz von Europium führte zu einer neuen Modifikation des bronzoiden Oxids EuTa2O6, in der das Europium als Eu+2 vorliegt, wie 151Eu-Mößbauer-Untersuchungen bestätigten. Vor der Durchführung der Kristallzüchtungen mittels der Schmelzflußelektrolysen mußten die benutzen Öfen und Elektrolysezellen geplant und angefertigt werden. Es konnten dann verschiedene blaue, rote und violette Moybdänbronzen (sowie La2Mo2O7) in Kristallen bis zu 25 mm Länge dargestellt werden. Ferner gelang die erste exakte Einkristalluntersuchung der roten Bronze Rb0.33MoO3. Sie verfügt über die höchste d-Elektronen-Lokalisierungsrate aller bekannten roten Bronzen. Die erhaltenen Bronzen wurden teilweise von der Arbeitsgruppe Fuchs, Physikalisches Institut der Westfälischen Wilhelms-Universität Münster, auf ihre Nanostrukturierbarkeit hin untersucht. Dabei ergaben sich zwei verschiedene Strukturierungsmechanismen. Sind es im Fall der blauen Alkalimetall-Molybdänbronzen ausschließlich Lochstrukturen, die entstehen, handelt es sich bei La2Mo2O7 um Hügelstrukturen. Mittels der Schmelzflußelektrolyse konnte auch das gemischtvalente Alkalimetall-Eisenmolybdat NaFe2(MoO4)3 synthetisiert werden. Daneben gelang die Synthese dreier weiterer Alkalimetall-Eisenmolybdate: Cs2Fe2(MoO4)3, NaFe4(MoO4)5 und CsFe5(MoO4)7. Bis auf Cs2Fe2(MoO4)3, welches in der bekannten Langbeinit-Struktur kristallisiert, handelt es sich bei den übrigen Alkalimetall-Eisenmolybdaten um völlig neuartige Käfigverbindungen, bzw. bei CsFe5(MoO4)7 um eine Tunnelverbindung. Die Kristallstrukturen beinhalten kondensierte FeO6-Oktaeder. Im Fall von NaFe2(MoO4)3 lassen sich [Fe2O10]-Einheiten, für NaFe4(MoO4)5 [Fe2O10]- sowie [Fe3O14]-Einheiten, und für CsFe5(MoO4)7 [Fe4O18]-Baueinheiten beobachten. Die Positionen der Fe+2- und Fe+3-Atome in NaFe4(MoO4)5 wurden mit Hilfe einer 57Fe-Mößbauer-Untersuchung bestimmt.

Tertiary Minette and Melanephelinite Dikes, Wasatch Plateau, Utah - Records of Mantle Heterogeneities and Changing Tectonics

A swarm of minette and melanephelinite dikes is exposed over 2500 km2 in and near the Wasatch Plateau, central Utah, along the western margin of the Colorado Plateaus in the transition zone with the Basin and Range province. To date, 110 vertical dikes in 25 dike sets have been recognized. Strikes shift from about N80-degrees-W for 24 Ma dikes, to about N60-degrees-W for 18 Ma, to due north for 8-7 m.y. These orientations are consistent with a shift from east-west Oligocene compression associated with subduction to east-west late Miocene crustal extension. Minettes are the most common rock type; mica-rich minette and mica-bearing melanephelinite occurs in 24 Ma dikes, whereas more ordinary minette is found in 8-7 Ma dikes. One melanephelinite dike is 18 Ma. These mafic alkaline rocks are transitional to one another in modal and major element composition but have distinctive trace element patterns and isotopic compositions; they appear to have crystallized from primitive magmas. Major, trace element, and Nd-Sr isotopic data indicate that melanephelinite, which has similarities to ocean island basalt, was derived from small degree melts of mantle with a chondritic Sm/Nd ratio probably located in the asthenosphere, but it is difficult to rule out a lithospheric source. In contrast, mica-bearing rocks (mica melanephelinite and both types of minette) are more potassic and have trace element patterns with strong Nb-Ta depletions and Sr-Nd isotopic compositions caused by involvement with a component from heterogeneously enriched lithospheric mantle with long-term enrichment of Rb or light rare earth elements (REE) (epsilon Nd as low as - 15 in minette). Light REE enrichment must have occurred anciently in the mid-Proterozoic when the lithosphere was formed and is not a result of Cenozoic subduction processes. After about 25 Ma, foundering of the subducting Farallon plate may have triggered upwelling of warm asthenospheric mantle to the base of the lithosphere. Melanephelinite magma may have separated from the asthenosphere and, while rising through the lithosphere, provided heat for lithospheric magma generation. Varying degrees of interaction between melanephelinite and small potassic melt fractions derived from the lithospheric mantle can explain the gradational character of the melanephelinite to minette suite.

Appendix A. Whole-rock major, trace and rare earth element analyses of the Ulubey volcanics, Appendix B. Analytical standards and detection limits for analyses

Collisional and post-collisional volcanic rocks in the Ulubey (Ordu) area at the western edge of the Eastern Pontide Tertiary Volcanic Province (EPTVP) in NE Turkey are divided into four suites; Middle Eocene (49.4-44.6 Ma) aged Andesite-Trachyandesite (AT), Trachyandesite-Trachydacite-Rhyolite (TTR), Trachydacite-Dacite (TD) suites, and Middle Miocene (15.1 Ma) aged Trachybasalt (TB) suite. Local stratigraphy in the Ulubey area starts with shallow marine environment sediments of the Paleocene-Eocene time and then continues extensively with sub-aerial andesitic to rhyolitic and rare basaltic volcanism during Eocene and Miocene time, respectively. Petrographically, the volcanic rocks are composed primarily of andesites/trachyandesites, with minor trachydacites/rhyolites, basalts/trachybasalts and pyroclastics, and show porphyric, hyalo-microlitic porphyric and rarely glomeroporphyric, intersertal, intergranular, fluidal and sieve textures. The Ulubey (Ordu) volcanic rocks indicate magma evolution from tholeiitic-alkaline to calc-alkaline with medium-K contents. Primitive mantle normalized trace element and chondrite normalized rare earth element (REE) patterns show that the volcanic rocks have moderate light rare earth element (LREE)/heavy rare earth element (HREE) ratios relative to E-Type MORB and depletion in Nb, Ta and Ti. High Th/Yb ratios indicate parental magma(s) derived from an enriched source formed by mixing of slab and asthenospheric melts previously modified by fluids and sediments from a subduction zone. All of the volcanic rocks share similar incompatible element ratios (e.g., La/Sm, Zr/Nb, La/Nb) and chondrite-normalized REE patterns, indicating that the basic to acidic rocks originated from the same source. The volcanic rocks were produced by the slab dehydration-induced melting of an existing metasomatized mantle source, and the fluids from the slab dehydration introduced significant large ion lithophile element (LILE) and LREE to the source, masking its inherent HFSE-enriched characteristics. The initial 87Sr/86Sr (0.7044-0.7050) and eNd (-0.3 to +3.4) ratios of the volcanics suggest that they originated from an enriched lithospheric mantle source with low Sm/Nd ratios. Integration of the geochemical, petrological and isotopical with regional and local geological data suggest that the Tertiary volcanic rocks from the Ulubey (Ordu) area were derived from an enriched mantle, which had been previously metasomatized by fluids derived from subducted slab during Eocene to Miocene in collisional and post-collisional extension-related geodynamic setting following Late Mesozoic continental collision between the Eurasian plate and the Tauride-Anatolide platform.