Análise da eficiência do cobre, alumínio e PVC como condutores hidráulicos em aquecedores solares

One of society concerns are preserving the environment and the growing energy demand. These two issues are in conflict since most of the energy used today in some way harms the environment. Then is essential to develop and implement ways to clean and renewable energy. In this way, solar energy stands out as a source of clean energy, renewable, abundant and acessible. Solar energy can be harnessed by photovoltaic cells or by solar collectors. The aim of this article is analysethe yield of the solar heather assembled with hydraulic conductive and plastic bottles using three different materials for hydraulic conductors, in order to compare these efficiences and analyze material which has the best cost-benefit in this type of application. The materials analyzed in this study were copper, aluminum and PVC. For this analysis were assembled three alike solar heaters using each one of these materials, and were done several series of measurements of the temperature water output to each heat with flow between 10 and 30 liters per hour. With these data we can analyze the yield and the performance of copper, aluminum and PVC in this application. So we can conclude that aluminum has a higher efficiency, followed by PVC, and the copper had the lowest efficiency. This behavior kept for all values of flow rates examined

Determinação de manganêsem águas no entorno de minerações de urânio

The studies of this work aimed to determine the labile fractions of manganese (Mn) in natural and drainage water samples collected around the Osamu Utsumi uranium mine, located in the municipality of Caldas, south-central region of Poços de Caldas- MG, using the technique of diffusion gradient in thin films (DGT). The DGT devices were mounted with Chelex-100 resin, polyacrylamide-agarose hydrogel (conventional porosity) and cellulose acetate membrane. The device were deployed up to 48 hours in six water samples collected from different areas around the uranium mine (075, 076, 022-E, 025-E, 014, and 041). The DGT devices immersed in each sample were gradually removed after 4, 8, 12, 24 and 48 hours. The pH of the samples ranged from 3.0 to 10.5, which influenced the lability and the sampling of the analyte by the Chelex-100 resin. The results showed a linear relationship between accumulated mass and sampling time (immersion curve) for samples 014 and 025-E (pH between 6 and 8) suggesting the ability of the DGT technique for sampling the analyte. The results obtained for samples 075 and 076 (pH<5) and samples 041 and 022-E (pH around 10) were characterized by nonlinear relationships. The values obtained by DGT were compared with Solid Phase Extraction (SPE) technique using Chelex-100. For samples 014 and 025-E, there was a good agreement between the results obtained by both techniques

Comparação de eficiências do uso de sistemas construídos de áreas alagadas (Constructed Wetland Systems - CWS), tipos ascendente e descendente, para tratamento de efluentes

Water is an essential element for life. The use of this element, to support the community, defines it as water resource. This feature is being misused and degraded by the dumping of highly contaminated effluents. The impoverishment of its quality poses a risk to human consumption. The necessity to manage this resource, treating the wastewater properly, requires the constant improvement of treatment systems. Another need is to adjust the cost of systems to the demands of communities with less financial clout. This study aimed to adapt and understand the systems of wetlands, improving its efficiency, in an attempt to collaborate with the enrichment of this technology. The practical evidence, with lab-scale prototypes, assembled in ETE Piracicamirim with urban sewage effluent contributed to highlight the problems and operating system design. The bibliographic review showed that several studies had effectiveness for treatment. But it was evident the need for better understanding of dimensioning definitions that better attempted to the answers into the project. Moreover, standardization of system conditions for the specific wastewater treatment is an interesting field, identified, for future studies yet contribute to environmental engineering and sanitation

Reabilitação estético-funcional sobre implantes agulhados e endósseos

This report shows the resolution of a case study whose aim was promote the aesthetic and functional rehabilitation of upper left hemi-arch over endosseous and needle implant prostheses. To improve the position of the needle implants, we performed the bucco-palatal bending of needles splinting them with composite resin; we removed the screwed implant prosthesis in the regions of the premolars (24 and 25) and molar (26). The mini-abutments of the last two implants were replaced, and in the first premolar and canine, we used cemented abutments due to implant angulation having planned soldering because of implant size and contact with one needle implant that could interfere with intimate contact bone/implant damaging biomechanics. Pick-up impressions were performed with an open tray, using a retractor cord in the needle implants and respective transfer copings. Therefore, models were related on semi-adjustable articulator after a face-bow recording and interocclusal indexes. After working cast fabrication and try-in of infra-structures, these were adjusted and related into the articulator again. Then, after ceramic build-up, adjustments, finishing, and torque, chemically-activated resin cement was applied on units 21 to 24. At the end of the case, we concluded that a good aesthetic and functional rehabilitation depends on thorough knowledge of techniques for each clinical situation.

Efeito de métodos de desgaste com pontas diamantadas e da ressinterização sobre o limite de fadiga flexural de uma zircônia parcialmente estabilizada por ítria

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diversidade e sazonalidade de ácaros (Acari) em seringal (Hevea brasiliensis, Muell. Arg.) no Noroeste do Estado de São Paulo

Brazilian southeastern region has soil and climate conditions suitable for the growing of rubber trees, and most part of national yield arises from São Paulo State. The aims proposed for this work were to determine the diversity, the richness and the seasonal occurrence of mites found in a rubber tree crop in a triennial survey with monthly samplings, as well as to estimate the populational density of the major phytophagous species. This study found 74,407 mites from 26 species belonging to 10 families. The phytophagous and predators represented 95.4% and 3.9% of the total abundance, respectively. Twelve species were rare, six accessories and eight constant. The families Phytoseiidae and Tydeidae had the greatest richness (five and four species, respectively). The most numerous species was Calacarus heveae Feres (50,573), with great abundance at the end of rainy season until the beginning of dry season. Among predators, the most abundant were Zetzellia quasagistemas Hernandes & Feres (1,345), Pronematus sp. (455), Zetzellia agistzellia Hernandes & Feres (409) and Euseius citrifolius Denmark & Muma (243). C. heveae had greatest densities on March and April 2003, and Lorryia formosa Cooreman and Tenuipalpus heveae Baker on March and May 2001, respectively. Many stigmaeids were observed in association with colonies of L. formosa preying their eggs and immatures.

Diversidade e sazonalidade de ácaros (Acari) em seringal (Hevea brasiliensis, Muell. Arg.) no Noroeste do Estado de São Paulo

A Região Sudeste do Brasil apresenta aspectos edafo-climáticos favoráveis para o plantio e desenvolvimento da seringueira, sendo o estado de São Paulo o maior produtor nacional de látex. Este trabalho teve como objetivos determinar, através de coletas mensais durante três anos de estudo, a diversidade, a riqueza de espécies e a sua sazonalidade, bem como realizar estimativas de densidade populacional das principais espécies de ácaros presentes nas folhas. Todos os ácaros foram montados em lâminas de microscopia, totalizando 74.407 indivíduos, de 26 espécies pertencentes a 10 famílias. Os fitófagos representaram 95,4% do total de indivíduos coletados e os predadores 3,9%. Doze espécies foram consideradas acidentais, seis foram acessórias e oito constantes. Apresentaram maior número de espécies as famílias Phytoseiidae (cinco) e Tydeidae (quatro). A espécie mais abundante foi Calacarus heveae Feres (50.573), com maior abundância nos meses correspondentes ao término da estação chuvosa e início da estação seca na região. Dentre os predadores, a mais abundante foi Zetzellia quasagistemas Hernandes & Feres (1.345), seguida por Pronematus sp. (455), Zetzellia agistzellia Hernandes & Feres (409) e Euseius citrifolius Denmark & Muma (243). C. heveae apresentou maior densidade populacional em março e abril de 2003, e Lorryia formosa Cooreman e Tenuipalpus heveae Baker em março e maio de 2001, respectivamente. Muitos estigmeídeos foram observados associados a agrupamentos de L. formosa predando seus ovos e estágios imaturos.

Molhabilidade de material reembasador: efeito dos agentes químicos de limpeza

Risk of mechanical injuries contraindicate brushing and elect chemical agents as appropriate for daily cleaning of dentures relined with resilient materials. It was evaluated the effect of denture cleansers on the wettability of denture relining material (Dentusoft, Dental Medrano). We used 20 discs of acrylic resin thermoactivated VipiCril ® with 30mm diameter and 4mm thick, covered by 2mm Dentusoft ®. Divided into 4grupos were stored in artificial saliva at 37 +1 º C for 30 days, immersed daily for 15minutes in distilled water (GI), Corega ® Tabs (GII), a solution of sodium bicarbonate (GIII) or solution of sodium hypochlorite (GIV) after which, on the soft liner were poured 2 ml of type IV gypsum (Durone IV, Dentsply). Reached the final setting of the gypsum specimens were sectioned vertically and medially, settled water with sandpaper No. 400 and mounted on suitable device for reading (in the right and left) of the contact angle Carl Zeiss microscope (precision, 001). The results were submitted to analysis, showed non-normal distribution, opting for non-parametric test. Kruskal Wallis test performed at 5% significance, there was statistical difference between the groups with lower average contact angle for GII. It was concluded that the chemical cleaning Corega Tabs ® allowed a better adaptation of relining the gypsum studied.

Compatibilidade entre alginato e gesso ortodônticos: capacidade de umedecimento sob influência da desinfecção do molde

The dental trade has offered dental impression and dental stone for orthodontic use ensuring accurate models. The compatibility between these materials is defined by the wetting of the model surfaces by the mixture water/stone poured over it and the influenced by the method of disinfection of model and disinfectant solution used. It was evaluated the influence of spray disinfection with sodium hypochlorite 1% on the wettability of two commercial alginate (Jeltrate ® - Dentsply and Orthoprint ® - Zhermack) at two commercial type III gypsum (Rio ® - ME and AOBussoli Orthogesso Orthogesso ®-SA). Twenty models were fabricated for each type of alginate, which were divided into two groups (water and sodium hypochlorite), receiving respectively water and sodium hypochlorite 1% spray. Each group of models was then further divided into two subgroups, and on their surface were poured 2 ml of type III gypsum (Gesso Rio® or Orthogesso®). Reached the final setting of the gypsum specimens were sectioned vertically and medially, settled water with sandpaper No. 400 and mounted on suitable device for reading (in the right and left) of the contact angle Carl Zeiss microscope (precision, 001). The results were submitted to ANOVA and founded statistical significance for solutions used. It was concluded that sodium hypochlorite spray improved wettability of alginates studied.

Efeito da desinfecção e do tempo de armazenagem na molhabilidade de moldes de alginato

The cares at the manipulation of the alginate (condensation, disinfection of the impression and the time elapsed until the leak of the plaster) deserve special attention considering the great amount of distortions occurring every time the impression is not fill of plaster in a brief space of time and appropriate storage conditions. Besides its adaptation to the plaster suffers influence of the events happened after the impression is removed of the mouth. The purpose of this research was to evaluate the wetting capacity of three brands of alginate (Jeltrate™,Hydrogum™ e Orthoprint™) by the plaster type III (Rio™) under the influence of disinfection by sodium hypochlorite 1% sprays and the time of storage of 15 minutes,30 minutes, 1 hour, 6, 12 and 24 hours. There were made 60 impressions of each brand of alginate divided in two groups (water and sodium hypochlorite 1%) rearranged after the application of the sodium hypochlorite spray according to the storage time (15 or 30 minutes and 1,6,12, or 24 hours). On the surface of the impressions 2ml of plaster were flowed, proportioned and condensed in agreement with manufacturer‘s instructions. After the final setting expansion the casts were sectioned vertically and medially, regularized at the cut surface (emery paper 400) and setted for reading the contact angle at the microscope Carl Zeiss. The obtained results, submitted to statistical treatment (ANOVA) revealed significant differences when compared the employed solutions (water and sodium hypochlorite 1%) and the time of storage. The sodium hypochlorite 1% exhibited the smallest contact angles and the times of storage of 15 minutes and 6 hours the smallest and larger angles, respectively. It can be concluded that the alginate impressions exhibited larger adaptation to the plaster when disinfected by hypochlorite of sodium 1% and stocked by 15 minutes.

Análise do transcriptoma de folhas de cana-de-açúcar submetidas à prolongada limitação hídrica usando RNA-Seq

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Determinação in situ de metilmercúrio e mercúrio (II) em sistemas aquáticos nas proximidades de refinarias de petróleo, utilizando a técnica difusão em filmes finos por gradiente de concentração (DGT)

Pós-graduação em Geociências e Meio Ambiente - IGCE

Ácaros de penas (Acari: Astigmata) em aves não passeriformes do Brasil

Pós-graduação em Ciências Biológicas (Zoologia) - IBRC

Desenvolvimento infantil: associação com estresse, ansiedade e depressão materna, da gestação ao primeiro ano de vida

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização e análise das comunidades e infracomunidades de parasitos metazoários de Plagioscion squamosissimus (Heckel, 1840) capturados no reservatório de Promissão, rio Tietê, estado de São Paulo

Pós-graduação em Medicina Veterinária - FCAV