Use of computational fluid dynamics in the design of bubble column reactors

Investigations into the modelling techniques that depict the transport of discrete phases (gas bubbles or solid particles) and model biochemical reactions in a bubble column reactor are discussed here. The mixture model was used to calculate gas-liquid, solid-liquid and gasliquid-solid interactions. Multiphase flow is a difficult phenomenon to capture, particularly in bubble columns where the major driving force is caused by the injection of gas bubbles. The gas bubbles cause a large density difference to occur that results in transient multi-dimensional fluid motion. Standard design procedures do not account for the transient motion, due to the simplifying assumptions of steady plug flow. Computational fluid dynamics (CFD) can assist in expanding the understanding of complex flows in bubble columns by characterising the flow phenomena for many geometrical configurations. Therefore, CFD has a role in the education of chemical and biochemical engineers, providing the examples of flow phenomena that many engineers may not experience, even through experimentation. The performance of the mixture model was investigated for three domains (plane, rectangular and cylindrical) and three flow models (laminar, k-e turbulence and the Reynolds stresses). mThis investigation raised many questions about how gas-liquid interactions are captured numerically. To answer some of these questions the analogy between thermal convection in a cavity and gas-liquid flow in bubble columns was invoked. This involved modelling the buoyant motion of air in a narrow cavity for a number of turbulence schemes. The difference in density was caused by a temperature gradient that acted across the width of the cavity. Multiple vortices were obtained when the Reynolds stresses were utilised with the addition of a basic flow profile after each time step. To implement the three-phase models an alternative mixture model was developed and compared against a commercially available mixture model for three turbulence schemes. The scheme where just the Reynolds stresses model was employed, predicted the transient motion of the fluids quite well for both mixture models. Solid-liquid and then alternative formulations of gas-liquid-solid model were compared against one another. The alternative form of the mixture model was found to perform particularly well for both gas and solid phase transport when calculating two and three-phase flow. The improvement in the solutions obtained was a result of the inclusion of the Reynolds stresses model and differences in the mixture models employed. The differences between the alternative mixture models were found in the volume fraction equation (flux and deviatoric stress tensor terms) and the viscosity formulation for the mixture phase.

Differences in market-oriented behaviour levels across firms' domestic and export marketing operations:a study of antecedents and consequences

Researchers are beginning to recognise that organisations often have different levels of market orientation across different aspects of their operations. Focusing on firms involved in export marketing, this study examines how market-oriented behaviour differs across firms' domestic and export marketing operations. In this respect, the study is the first of its kind since it investigates three main issues: (1) to what extent do differences exist in firms' levels of market-oriented behaviour in their domestic markets (i.e., their domestic market-oriented behaviour) and in their export markets (i.e., their export market-oriented behaviour), (2) what are the key drivers of such differences, and (3) what are the performance implications for firms of having different levels of domestic and export market-oriented behaviour. To shed light on these research questions, data were collected from 225 British exporting firms using a mail questionnaire. Structural equation modelling techniques were used to develop and purify measures of all construct of interest, and to test the theoretical models developed. The results indicate that many of businesses sampled have very different levels of market orientation in their domestic and exporting operations: typically, firms tend to be more market-oriented in their domestic markets relative to their export markets. Several key factors were identified as drivers of differences in market orientation levels across firms' domestic and export markets. In particular, it was found that differences were more pronounced when: (i) interfunctional interactions between domestic marketing and export marketing are rare, (ii) when domestic and export marketing follow asymmetric business strategies, (iii) when mutual dependence between the functions is low, (iv) when one or other of the functions dominates the firm's sales, and (v) when there are pronounced differences in the degree to which the domestic and the export markets are experiencing environmental turbulence. The consequences of differences in market-oriented behaviour across firms' domestic and export markets were also studied. The results indicate that overall sales performance of firms (as determined by the composite of firms' domestic sales and export sales performance) is positively related to levels of domestic market-oriented behaviour under high levels of environmental turbulence in firms' domestic markets. However, as domestic market turbulence decreases, so to does the strength of this positive relationship. On the other hand, export market-oriented behaviour provides a positive contribution to firms' overall sales success under conditions of relatively low export market turbulence. As the turbulence in export markets increases, this positive relationship becomes weaker. These findings indicate that there are numerous situations in which it is sub-optimal for firms to have identical levels of market-oriented behaviour in their domestic and exporting operations. The theoretical and practical implications of these findings are discussed.

Trend analysis in scientometrics

The thesis investigates the properties of two trends or time series which formed a:part of the Co-Citation bibliometric model "X~Ray Crystallography and Protein Determination in 1978, 1980 and 1982". This model was one of several created for the 1983 ABRC Science Policy Study which aimed to test the utility of bibliometric models in a national science policy context. The outcome of the validation part of that study proved to be especially favourable concerning the utility of trend data, which purport to model the development of speciality areas in science over time. This assessment could have important implications for the use of such data in policy formulation. However one possible problem with the Science Policy Study's conclusions was that insufficient time was available in the study for an in-depth analysis of the data. The thesis aims to continue the validation begun in the ABRC study by providing a detailed.examination of the characteristics of the data contained in the Trends numbered 11 and 44 in the model. A novel methodology for the analysis of the properties of the trends with respect to their literature content is presented. This is followed by an assessment based on questionnaire and interview data, of the ability of Trend 44 to realistically model the historical development of the field of mobile genetic elements research over time, with respect to its scientific content and the activities of its community of researchers. The results of these various analyses are then used to evaluate the strenghts and weaknesses of a trend or time series approach to the modelling of the activities of scientifiic fields. A critical evaluation of the origins of the discovered strengths and weaknesses.in the assumptions underlying the techniques used to generate trends from co-citation data is provided. Possible improvements. to the modelling techniques are discussed.

An investigation into the antecedents of prosocial service behaviours : a travel service context

Frontline employee (FLE) attitudes and behaviours during service encounters influence customers’ perceptions of service quality and customer satisfaction. The identification of variables that influence FLEs service behaviours is, therefore, important. Much remains unknown about the factors affecting prosocial service behaviours (PSBs). This thesis answers the following questions: What are the antecedents of PSBs in a travel service setting? It is argued that managerial strategies indirectly influence PSBs via their direct influence on job attitudes. This thesis represents an attempt towards an increased knowledge about the antecedents of PSBs by seeking answers to the question. A conceptual model was developed from the literature. Briefly stated, the hypothesised model proposed that job attitudes mediate the relationship between managerial strategies and the PSBs. In-depth interviews provided initial support for the conceptual model. Structural equation modelling techniques were then used to test these relationships on data from 179 travel service employees. Partial support for the mediational role of job attitudes was found. More specifically, the relationship between professional development and extra-role customer service is mediated by job satisfaction and organisational commitment, but not in-role customer service and cooperation. The managerial strategies influence PSBs directly. Internal communication influences extra- and in-role customer service behaviours positively. The relationship between professional development and the three PSBs constructs is negative. Empowerment influences in-role customer service and cooperative behaviours positively.

Development and formulation of wax-based transdermal drug delivery systems

Topical and transdermal formulations are promising platforms for the delivery of drugs. A unit dose topical or transdermal drug delivery system that optimises the solubility of drugs within the vehicle provides a novel dosage form for efficacious delivery that also offers a simple manufacture technique is desirable. This study used Witepsol® H15 wax as a abase for the delivery system. One aspect of this project involved determination of the solubility of ibuprofen, flurbiprofen and naproxen in the was using microscopy, Higuchi release kinetics, HyperDSC and mathematical modelling techniques. Correlations between the results obtained via these techniques were noted with additional merits such as provision of valuable information on drug release kinetics and possible interactions between the drug and excipients. A second aspect of this project involved the incorporation of additional excipients: Tween 20 (T), Carbopol®971 (C) and menthol (M) to the wax formulation. On in vitro permeation through porcine skin, the preferred formulations were: ibuprofen (5% w/w) within Witepsol®H15 + 1% w/w T; flurbiprofen (10% w/w) within Witepsol®H15 + 1% w/w T; naproxen (5% w/w) within Witepsol®H15 + 1% w/w T + 1% C and sodium diclofenac (10% w/w) within Witepsol®H15 + 1% w/w T + 1% w/w T + 1% w/w C + 5% w/w M. Unit dose transdermal tablets containing ibuprofen and diclofenac were produced with improved flux compared to marketed products; Voltarol Emugel® demonstrated flux of 1.68x10-3 cm/h compared to 123 x 10-3 cm/h for the optimised product as detailed above; Ibugel Forte® demonstrated a permeation coefficient value of 7.65 x 10-3 cm/h compared to 8.69 x 10-3 cm/h for the optimised product as described above.

Development of a sediment yield model for South East Ghana in the regions around Lake Volta

Soil erosion is one of the most pressing issues facing developing countries. The need for soil erosion assessment is paramount as a successful and productive agricultural base is necessary for economic growth and stability. In Ghana, a country with an expanding population and high potential for economic growth, agriculture is an important resource; however, most of the crop production is restricted to low technology shifting cultivation agriculture. The high intensity seasonal rainfall coincides with the early growing period of many of the crops meaning that plots are very susceptible to erosion, especially on steep sided valleys in the region south of Lake Volta. This research investigated the processes of soil erosion by rainfall with the aim of producing a sediment yield model for a small semi-agricultural catchment in rural Ghana. Various types of modelling techniques were considered to discover those most applicable to the sub-tropical environment of Southern Ghana. Once an appropriate model had been developed and calibrated, the aim was to look at how to enable the scaling up of the model using sub-catchments to calculate sedimentation rates of Lake Volta. An experimental catchment was located in Ghana, south west of Lake Volta, where data on rainstorms and the associated streamflow, sediment loads and soil data (moisture content, classification and particle size distribution) was collected to calibrate the model. Additional data was obtained from the Soil Research Institute in Ghana to explore calibration of the Universal Soil Loss Equation (USLE, Wischmeier and Smith, 1978) for Ghanaian soils and environment. It was shown that the USLE could be successfully converted to provide meaningful soil loss estimates in the Ghanaian environment. However, due to experimental difficulties, the proposed theory and methodology of the sediment yield model could only be tested in principle. Future work may include validation of the model and subsequent scaling up to estimate sedimentation rates in Lake Volta.

Synthesis and biological properties of 2-phenylbenzothiazole derivatives

2-Phenylbenzothiazoles have structural similarities to the antioestrogenic 2-phenylindole, zindoxifene and to the oestrogenic isoflavone, genistein which also inhibits tyrosine kinases. Hydroxylated 2-phenylbenzothiazole derivatives were therefore produced and tested for oestrogenic and tyrosine kinase inhibitory activity. Synthesis of methoxy substituted 2-phenylbenzothiazoles was via the Jacobson method, demethylation being effected by boron tribromide at -70oC. Three amino substituted 2-phenylbenzothiazoles were also synthesised and tested for activity. Data is presented for oestrogen receptor binding activity, aromatase inhibitory activity, epidermal growth factor receptor tyrosine kinase (EGFRTK) inhibitory activity and cytotoxicity to ANN-1, 3T3, MCF-7 and WIDR cells. Oestrogen receptor binding affinity (RBA) was shown by five of the nine compounds tested. 2-(4-hydroxy)-6-hydroxybenzo-thiazole was the most active of the benzothiazoles tested (RBA 0.7). This is low but comparable to that of genistein. EGFRTK inhibitory activity was shown by four of the six benzothiazole derivatives tested; activity was comparable to that of genistein. Cytotoxicity assays have shown no selective toxicity of 2-phenylbenzothiazoles to any of the cell lines tested. Toxicity to MCF-7 cells was similar to that for other cell lines despite some compounds showing oestrogen receptor binding capacity. Amino-substituted 2-phenylbenzothiazoles showed selective toxicity towards transformed ANN-1 cells compared to normal 3T3 cells but the mechanism of this selectivity has not been established. Molecular modelling techniques, including CHEM-X, QUANTA and MOPAC were used to compare known ATP-competitive tyrosine kinase inhibitors with a model of ATP built from the crystal structure of the ATP-phosphoglycerate kinase complex. Structural features thought to be important to kinase inhibition were found and used to suggest further 2-phenylbenzothiazole analogues which may have improved activity.

DNA methylation at cytosine position 5

DNA methylation appears to be involved in the regulation of gene expression. Transcriptionally inactive (silenced) genes normally contain a high proportion of 5-methyl-2'-deoxycytosine residues whereas transcriptionally active genes show much reduced levels. There appears good reason to believe that chemical agents capable of methylating 2'-deoxycytosine might affect gene expression and as a result of hypermethylating promoter regions of cytosine-guanine rich oncogenic sequences, cancer related genes may be silenced. This thesis describes the synthesis of a number of `electrophilic' S-methylsulphonium compounds and assesses their ability to act as molecules capable of methylating cytosine at position 5 and also considers their potential as cytotoxic agents. DNA is methylated in vivo by DNA methyltransferase utilising S-adenoxylmethionine as the methyl donor. This thesis addresses the theory that S-adenoxylmethionine may be replaced as the methyl donor for DNA methytransferase by other sulphonium compounds. S-[3H-methyl]methionine sulphonium iodide was synthesised and experiments to assess the ability of this compounds to transfer methyl groups to cytosine in the presence of DNA methyltransferase were unsuccessful. A proline residue adjacent to a cysteine residue has been identified to a highly conserved feature of the active site region of a large number of prokaryotic DNA methyltransferases. The thesis examines the possibility that short peptides containing the Pro-Cys fragment may be able to facilitate the alkylation of cytosine position 5 by sulphonium compounds. Peptides were synthesised up to 9 amino acids in length but none were shown to exhibit significant activity. Molecular modelling techniques, including Chem-X, Quanta, BIPED and protein structure prediction programs were used to assess any structural similarities that may exist between short peptides containing a Pro-Cys fragment and similar sequences present in proteins. A number of similar structural features were observed.

Relational diversity, social integration and individual effectiveness: a social self-regulation perspective

Relational demographers and dissimilarity researchers contend that group members who are dissimilar (vs. similar) to their peers in terms of a given diversity attribute (e.g. demographics, attitudes, values or traits) feel less attached to their work group, experience less satisfying and more conflicted relationships with their colleagues, and consequently are less effective. However, qualitative reviews suggest empirical findings tend to be weak and inconsistent (Chattopadhyay, Tluchowska and George, 2004; Riordan, 2000; Tsui and Gutek, 1999), and that it remains unclear when, how and to what extent such differences (i.e. relational diversity) affect group members social integration (i.e. attachment with their work group, satisfaction and conflicted relationships with their peers) and effectiveness (Riordan, 2000). This absence of meta-analytically derived effect size estimates and the lack of an integrative theoretical framework leave practitioners with inconclusive advice regarding whether the effects elicited by relational diversity are practically relevant, and if so how these should be managed. The current research develops an integrative theoretical framework, which it tests by using meta-analysis techniques and adding two further empirical studies to the literature. The first study reports a meta-analytic integration of the results of 129 tests of the relationship between relational diversity with social integration and individual effectiveness. Using meta-analytic and structural equation modelling techniques, it shows different effects of surface- and deep-level relational diversity on social integration Specifically, low levels of interdependence accentuated the negative effects of surface-level relational diversity on social integration, while high levels of interdependence accentuated the negative effects of deep-level relational diversity on social integration. The second study builds on a social self-regulation framework (Abrams, 1994) and suggests that under high levels of interdependence relational diversity is not one but two things: visibility and separation. Using ethnicity as a prominent example it was proposed that separation has a negative effect on group members effectiveness leading for those high in visibility and low in separation to overall positive additive effects, while to overall negative additive effects for those low in visibility and high in separation. These propositions were sustained in a sample of 621 business students working in 135 ethnically diverse work groups in a business simulation course over a period of 24 weeks. The third study suggests visibility has a positive effect on group members self-monitoring, while separation has a negative effect. The study proposed that high levels of visibility and low levels of separation lead to overall positive additive effects on self-monitoring but overall negative additive effects for those low in visibility and high in separation. Results from four waves of data on 261 business students working in 69 ethnically diverse work groups in a business simulation course held over a period of 24 weeks support these propositions.

Surface- and deep-level dissimilarity effects on social integration and individual effectiveness related outcomes in work groups:a meta-analytic integration

Prior research linking demographic (e.g., age, ethnicity/race, gender, and tenure) and underlying psychological (e.g., personality, attitudes, and values) dissimilarity variables to individual group member's work-related outcomes produced mixed and contradictory results. To account for these findings, this study develops a contingency framework and tests it using meta-analytic and structural equation modelling techniques. In line with this framework, results showed different effects of surface-level (i.e., demographic) dissimilarity and deep-level (i.e., underlying psychological) dissimilarity on social integration, and ultimately on individual effectiveness related outcomes (i.e., turnover, task, and contextual performance). Specifically, surface-level dissimilarity had a negative effect on social integration under low but not under high team interdependence. In return, social integration fully mediated the negative relationship between surface-level dissimilarity and individual effectiveness related outcomes under low interdependence. In contrast, deep-level dissimilarity had a negative effect on social integration, which was stronger under high and weaker under low team interdependence. Contrary to our predictions, social integration did not mediate the negative relationship between deep-level dissimilarity and individual effectiveness related outcomes but suppressed positive direct effects of deep-level dissimilarity on individual effectiveness related outcomes. Possible explanations for these counterintuitive findings are discussed. © 2011 The British Psychological Society.

Selection of simulation tools for improving supply chain performance

Simulation is an effective method for improving supply chain performance. However, there is limited advice available to assist practitioners in selecting the most appropriate method for a given problem. Much of the advice that does exist relies on custom and practice rather than a rigorous conceptual or empirical analysis. An analysis of the different modelling techniques applied in the supply chain domain was conducted, and the three main approaches to simulation used were identified; these are System Dynamics (SD), Discrete Event Simulation (DES) and Agent Based Modelling (ABM). This research has examined these approaches in two stages. Firstly, a first principles analysis was carried out in order to challenge the received wisdom about their strengths and weaknesses and a series of propositions were developed from this initial analysis. The second stage was to use the case study approach to test these propositions and to provide further empirical evidence to support their comparison. The contributions of this research are both in terms of knowledge and practice. In terms of knowledge, this research is the first holistic cross paradigm comparison of the three main approaches in the supply chain domain. Case studies have involved building ‘back to back’ models of the same supply chain problem using SD and a discrete approach (either DES or ABM). This has led to contributions concerning the limitations of applying SD to operational problem types. SD has also been found to have risks when applied to strategic and policy problems. Discrete methods have been found to have potential for exploring strategic problem types. It has been found that discrete simulation methods can model material and information feedback successfully. Further insights have been gained into the relationship between modelling purpose and modelling approach. In terms of practice, the findings have been summarised in the form of a framework linking modelling purpose, problem characteristics and simulation approach.

Enabling a simulation capability in the organisation

Enabling a Simulation Capability in the Organisation addresses the application of simulation modelling techniques in order to enable better informed decisions in business and industrial organisations. The book’s unique approach treats simulation not just as a technical tool, but within as a support for organisational decision making, showing the results from a survey of current and potential users of simulation to suggest reasons why the technique is not used as much as it should be and what are the barriers to its further use. By incorporating an evaluation of six detailed case studies of the application of simulation in industry by the author, the book will teach readers: •the role of simulation in decision making; •how to introduce simulation as a tool for decision making; and •how to undertake simulation studies that lead to change in the organisation. Enabling a Simulation Capability in the Organisation provides an introduction to the state of the art in simulation modelling for researchers in business studies and engineering, as well a useful guide to practitioners and managers in business and industry.

Optimization of Advertising Resources over Time: A Strategic Analysis

AMS subject classification: 90B60, 90B50, 90A80.

Balancing push and pull information management within the supply chain

The aim of this paper is to explore the management of information in an aerospace manufacturer's supply chain by analysing supply chain disruption risks. The social network perspective will be used to examine the flows of information in the supply chain. The examination of information flows will also be explored in terms of push and pull information management. The supply chain risk management (SCRM) strategy is to assess the management of information that allows companies to gather information which will allow them to mitigate that risk before any disruption to the supply chain occurs. There is a shortage of models in analysing the supply chain risk associated with information flows, possibly due to the omission of appropriate modelling techniques in this area (Tang and Nurmaya, 2011). This paper uses an exploratory case study consisting of a multi method qualitative approach using fifteen interviews and four focus groups.

Megtakarítási típusok - egy adaptív-evolúciós megközelítés = Types of saving - an adaptive-evolutionary approach

A közgazdaságtanban az ágensalapú modellezés egyik alkalmazási területe a makro ökonómia. Ebben a tanulmányban néhány népszerű megtakarítási szabály létét feltételezve adaptív-evolúciós megközelítésben endogén módon próbálunk következtetni e szabályok relatív életképességére. Három különböző típusú ágenst vezetünk be: egy prudens, egy rövidlátó és egy, a permanensjövedelem-elméletnek megfelelően működőt. Rendkívül erős szelekciós nyomás mellett a prudens típus egyértelműen kiszorítja a másik kettőt. A második legéletképesebbnek a rövidlátó típus tűnik, de már közepes szelekciós nyomásnál sem tűnik el egyik típus sem. Szokásos tőkehatékonyság mellett a prudens típus túlzott beruházási tendenciát visz a gazdaságba, és a gazdaság az aranykori megtakarítási rátánál magasabbat ér el. A hitelkorlátok oldása még nagyobb mértékű túlzott beruházáshoz vezethet, a hitelek mennyiségének növekedése mellett a tőketulajdonosok mintegy "kizsákmányoltatják" magukat azokkal, akiknek nincs tőkejövedelmük. A hosszú távú átlagos fogyasztás szempontjából a három típus kiegyensúlyozott aránya adja a legjobb eredményt, ugyanakkor ez jóval nagyobb ingadozással jár, mint amikor csak prudens típusú háztartások léteznek. ____ Agent-based modelling techniques have been employed for some time in macroeconomics. This paper tests some popular saving rules in an adaptive-evolutionary context of looking at their relative survival values. The three types are prudent, short-sighted, and responsive to the permanent-income hypothesis. It is found that where selection pressure is very high, only the prudent type persists. The second most resilient seems to be the short-sighted type, but all three coexist even at medium levels of selection pressure. When the efficiency of capital approaches the level usually assumed in macroeconomics, the prudent type drives the economy towards excessive accumulation of capital, i. e. a long-term savings rate that exceeds the golden rule. If credit constraints are relaxed, this tendency strengthens as credit grows and capital-owners seem to allow themselves to be exploited" by workers. From the angle of average consumption, the best outcome is obtained from a random distribution of types, although this is accompanied by higher volatility.