The influence of vegetation and building morphology on shadow patterns and mean radiant temperatures in urban areas: model development and evaluation

The solar and longwave environmental irradiance geometry (SOLWEIG) model simulates spatial variations of 3-D radiation fluxes and mean radiant temperature (T mrt) as well as shadow patterns in complex urban settings. In this paper, a new vegetation scheme is included in SOLWEIG and evaluated. The new shadow casting algorithm for complex vegetation structures makes it possible to obtain continuous images of shadow patterns and sky view factors taking both buildings and vegetation into account. For the calculation of 3-D radiation fluxes and T mrt, SOLWEIG only requires a limited number of inputs, such as global shortwave radiation, air temperature, relative humidity, geographical information (latitude, longitude and elevation) and urban geometry represented by high-resolution ground and building digital elevation models (DEM). Trees and bushes are represented by separate DEMs. The model is evaluated using 5 days of integral radiation measurements at two sites within a square surrounded by low-rise buildings and vegetation in Göteborg, Sweden (57°N). There is good agreement between modelled and observed values of T mrt, with an overall correspondence of R 2 = 0.91 (p < 0.01, RMSE = 3.1 K). A small overestimation of T mrt is found at locations shadowed by vegetation. Given this good performance a number of suggestions for future development are identified for applications which include for human comfort, building design, planning and evaluation of instrument exposure.

Flow structure and near-field dispersion in arrays of building-like obstacles

Dispersion in the near-field region of localised releases in urban areas is difficult to predict because of the strong influence of individual buildings. Effects include upstream dispersion, trapping of material into building wakes and enhanced concentration fluctuations. As a result, concentration patterns are highly variable in time and mean profiles in the near field are strongly non-Gaussian. These aspects of near-field dispersion are documented by analysing data from direct numerical simulations in arrays of building-like obstacles and are related to the underlying flow structure. The mean flow structure around the buildings is found to exert a strong influence over the dispersion of material in the near field. Diverging streamlines around buildings enhance lateral dispersion. Entrainment of material into building wakes in the very near field gives rise to secondary sources, which then affect the subsequent dispersion pattern. High levels of concentration fluctuations are also found in this very near field; the fluctuation intensity is of order 2 to 5.

Perspectives on the specification of Building Integrated Photovoltaic (BIPV) technology in construction projects

Innovative, low carbon technologies are already available for use in the construction of buildings, but the impact of their specification on construction projects is unclear. This exploratory research identifies issues which arise following the specification of BIPV in non-residential construction projects. Rather than treating the inclusion of a new technology as a technical problem, the research explores the issue from a socio-technical perspective to understand the accommodations which the project team makes and their effect on the building and the technology. The paper is part of a larger research project which uses a Social Construction of Technology Approach (SCOT) to explore the accommodations made to working practices and design when Building Integrated PhotoVoltaic (BIPV) technology is introduced. The approach explores how the requirements of the technology from different groups of actors (Relevant Social Groups or RSG's) give rise to problems and create solutions. As such it rejects the notion of a rational linear view of innovation diffusion; instead it suggests that the variety and composition of the Relevant Social Groups set the agenda for problem solving and solutions as the project progresses. The research explores the experiences of three people who have extensive histories of involvement with BIPV in construction, looks at how SCOT can inform our understanding of the issues involved and identifies themes and issues in the specification of BIPV on construction projects. A key finding concerns the alignment of inflection points at which interviewees have found themselves changing from one RSG to another as new problems and solutions are identified. The points at which they change RSG often occurred at points which mirror conventional construction categories (in terms of project specification, tender, design and construction).

Understanding the rapid summer warming and changes in temperature extremes since the mid-1990s over Western Europe

Analysis of observations indicates that there was a rapid increase in summer (June-August, JJA) mean surface air temperature (SAT) since the mid-1990s over Western Europe. Accompanying this rapid warming are significant increases in summer mean daily maximum temperature, daily minimum temperature, annual hottest day temperature and warmest night temperature, and an increase in frequency of summer days and tropical nights, while the change in the diurnal temperature range (DTR) is small. This study focuses on understanding causes of the rapid summer warming and associated temperature extreme changes. A set of experiments using the atmospheric component of the state-of-the-art HadGEM3 global climate model have been carried out to quantify relative roles of changes in sea surface temperature (SST)/sea ice extent (SIE), anthropogenic greenhouse gases (GHGs), and anthropogenic aerosols (AAer). Results indicate that the model forced by changes in all forcings reproduces many of the observed changes since the mid-1990s over Western Europe. Changes in SST/SIE explain 62.2% ± 13.0% of the area averaged seasonal mean warming signal over Western Europe, with the remaining 37.8% ± 13.6% of the warming explained by the direct impact of changes in GHGs and AAer. Results further indicate that the direct impact of the reduction of AAer precursor emissions over Europe, mainly through aerosol-radiation interaction with additional contributions from aerosol-cloud interaction and coupled atmosphere-land surface feedbacks, is a key factor for increases in annual hottest day temperature and in frequency of summer days. It explains 45.5% ± 17.6% and 40.9% ± 18.4% of area averaged signals for these temperature extremes. The direct impact of the reduction of AAer precursor emissions over Europe acts to increase DTR locally, but the change in DTR is countered by the direct impact of GHGs forcing. In the next few decades, greenhouse gas concentrations will continue to rise and AAer precursor emissions over Europe and North America will continue to decline. Our results suggest that the changes in summer seasonal mean SAT and temperature extremes over Western Europe since the mid-1990s are most likely to be sustained or amplified in the near term, unless other factors intervene.

Dinuclear Azide-Bridged Copper(II) Complex as Building Block for the Assembly of a 2D-Supramolecular Array

A novel Schiff base-copper(II) complex [Cu(2)L(2)(N(3))(2)](ClO(4))(2) 1, where L = (4-imidazolyl)ethylene-2-amino-1-ethylpyridine (apyhist), containing azide-bridges between adjacent copper ions in a dinuclear arrangement was isolated and characterized both in the solid state and in solution by X-ray crystallography and different spectroscopic techniques. Azide binding constants were estimated from titrations of the precursor [CuL(H(2)O)(2)](2+) solutions with sodium azide, giving rise to the azido-bridged species, [Cu(2)L(2)(N(3))(2)](2+). Raman spectra showed asymmetric stretching band at 2060 cm(-1), indicating the presence of azido ligands with a symmetric mu(1,) (1) binding geometry. EPA spectra, in frozen methanol/water solutions at 77 K, exhibited characteristic features of copper centers in tetragonal pyramidal coordination geometry, exhibiting magnetic interactions between them. Further, in solid state, two different values for magnetic coupling in this species were obtained, J/k = -(5.14 +/- 0.02) cm(-1) attributed to the mu(1, 1) azide-bridge mode, and J`z`/k = -(2.94 +/- 0.11) cm(-1) for the interaction between dinuclear moieties via water/perchorate bridges. Finally, an attempt was made to correlate structure and magnetic data for this dinuclear asymmetric end-on azido bridged-copper(II) 1 complex with those of another correlated dinuclear system, complex [Cu(2)L(2)Cl(2)](ClO(4))(2) 2, containing the same tridentate diimine ligand, but with chloro-bridged groups between the copper centres.

Synthesis and structure of 1,3,5-tris(diorganohydroxysilyl)benzenes. Novel building blocks in supramolecular silanol chemistry

The 1,3,5-tris(diorganohydroxysilyl)benzenes 1,3,5-(HOR₂Si)₃C₆H₃ (TMSB, R = Me; TPSB, R = Ph) have been prepared and fully characterized by X-ray crystallography. The crystal structure of TMSB features pairwise connected layers, in which the molecules are involved in interlayer hydrogen bonding. The supramolecular hydrogen bond motif may be described as a 12-membered ring that adopts a chair conformation. TPSB forms an equimolar inclusion complex with water, which is associated via hydrogen bonding and apparently fills a void in the crystal packing. In this case, the supramolecular hydrogen bond motif may be described as an eight-membered ring. Two of the water molecules are also associated, giving rise to a water dimer entrapped in the silanol matrix. Besides the hydrogen bonds, the crystal structure of the TPSB·H₂O complex reveals intra- and intermolecular C-H··· π stacking of most of the phenyl groups. Electrospray mass spectrometry shows that TPSB undergoes supramolecular complex formation with a variety of N-donors such as 4-(dimethylamino)pyridine, N,N,N',N'-tetramethylethylenediamine, imidazole, 2-(dimethylamino)pyridine, and 2,2'-dipyridylamine.

Download the full text: PDF | HTML

Energy efficient envelope design for high-rise apartments

The energy required to create a comfortable living environment in  high-density cities in hot and humid climates usually demands a substantial electricity usage with an associated environmental burden. This paper describes an integrated passive design approach to reduce the cooling requirement for high-rise apartments through an improved building envelope design. The results show that a saving of 31.4% in annual required cooling energy and 36.8% in the peak cooling load for the BASECASE apartment can be achieved with this approach. However, all the passive strategies have marginal effect on latent cooling load, often less than 1%.

Low energy strategies for high-rise apartments in Hong Kong

High-rise apartments provide 90% of the living requirements in Hong Kong. (Lam 1995) The construction material of these buildings is primarily concrete for both external wall and interior partitions with little or no thermal insulation. Due to the hot and humid climatic conditions and expectations of an ever-increasing standard of living, occupants are installing air-conditioning systems into their apartments. This has generated a tremendous electrical demand as well as an environmental (greenhouse gas emission) concern. This paper explores some of the low energy strategies that can be applied to this building typology. The effect of seven energy-saving strategies ranging from thermal insulation to different window systems and shading devices was investigated. The results show that there is the potential to reduce the annual cooling energy consumption and peak cooling load by 40% and 33% respectively.

Closing the gap? Building surveyors in Oceania

Purpose – The Royal Institution of Chartered Surveyors (RICS) has implemented a policy to expand its influence around the world. Quantity or construction surveyors had an established presence and history of working overseas, offering their services particularly in the Middle- and Far-East. Property surveyors found the transition to working in European Union (EU) countries relatively straightforward and numerous UK property consultancies have European, Asian, North American and Oceanic offices. Furthermore UK-based firms establishing partnerships with overseas real estate firms expanded significantly over the past decade. Building surveying (BS) is a different case. Small numbers work in commonwealth countries but it is limited and in many countries professional and academic qualifications are not recognised. This paper aims to consider the extent of the barriers and opportunities facing RICS chartered building surveyors (CBS) in Oceania (taken as Australia, New Zealand, Papua New Guinea and Fiji) and whether the gap is closing.
Design/methodology/approach – A desktop study reviewed the political, economic and sociological issues that affect the employment opportunities and professional services CBS offer throughout the world. Six opportunities and ten barriers were put to the RICS Oceania Building Surveying Faculty to ascertain their perceptions of these barriers and opportunities. No previous study had identified barriers and opportunities in Oceania for the BS and this research adopted a census survey of RICS practitioners currently employed in the region and the results form the most comprehensive picture of the current position.
Findings – Many respondents felt that stronger links and/or mergers with the different Oceania professional property and surveying bodies would open a large field of opportunities to the CBS. Some provided comments on future business opportunities, for example “leaky buildings,”"dilapidations/‘ make good’ work”, and seemed to be in general agreement that, as businesses came to know the benefits of protecting themselves from rogue tenants (and landlords) by using the services of a CBS, then opportunities would continue to rise. The principal barrier is communicating those skills and the value they add.
Research limitations/implications – The limitations that affected this research were time constraints and communicating with surveyors in Oceania, to whom the authors were not permitted direct access. The research methodology methods were, with hindsight, not ideal for the type and range of data that the researchers sought.
Originality/value – The research will be of use to building surveyors and providers of building-surveying education in Oceania.

Constructing a framework for building relationships and trust in project organisations : two case studies of building projects in China

A framework is constructed that can be used to foster trust and build relationships in construction project organizations in China. The research method was based on in-depth study of two building projects in China and data were collected via face-to-face interviews. The results show that as the project progresses, the dominant relationship within each stage deepens. The deepening relationship gives rise to different types of inherent risks such as a partner's self-interest seeking behaviour and opportunistic actions. To counterbalance these risks, trust fostering tools must be employed such as careful selection and effective management of partners. The framework for fostering trust and building relationship developed in the study suggests that (1) relationship deepens from shallow dependence to deep interdependence as the project progresses; (2) different relationships bring about distinct inherent risks; and (3) different trust-fostering tools counterbalance specific inherent risks. This framework could aid in reducing adversarial relationships by suggesting ways to foster trustworthy relationships.

Low energy design strategies for high-rise apartments in Hong Kong

The thesis provides comprehensive computer simulations of energy consumption in typical high-rise apartment buildings in Hong Kong with a focus on the effects of passive design strategies and air conditioning set-points. This research is related to energy efficient development and urbanisation in the tropics.

Height and construction costs of residential high-rise buildings in Shanghai

A widely recognized theme of construction economics suggests that the cost of construction per square meter increases as building height rises. However, over a number of years, research conducted regarding the height and cost issue has established a classic relationship between the two factors which can be represented by a U-shaped curve. This paper describes the study of the height-cost relationship of high-rise residential buildings in Shanghai in terms of the total construction cost and elemental costs while considering the context and commonality of buildings. This research was developed as an extension of the previous work, which examined data for buildings in Hong Kong. Initial findings indicate that the curves illustrating the relationships between height and cost of residential buildings in Shanghai and Hong Kong exhibit different profiles. The dissimilarities indicate that different sets of criteria should be applied in the judgment of height that affects cost in different locations. In terms of elemental costs, the findings suggest that there are differences in the way these costs react to changes in the building height.

Analysis of the cost performance of structural building frames in Australia

The significance of this research is that it is the first comprehensive analysis of cost performance across Australia. It is well known that measuring cost performance is not an easy task; comparisons of building projects on a `like-for-like’ basis are uncommon, and rarely occur in the real world. However, this paper analyses 120 different structural frame models that represent various; structural designs, construction methods, grid spans, and locations.

The research produced price models that were representative of structural frames used in medium-rise non-residential buildings. It is based on pricing a number of standard building frame designs in five Australian cities. The results represent the cost of producing the same building in different locations, using similar building construction techniques. By utilizing a standard model, project variables like building quality, ground conditions and access were eradicated, thereby facilitating an unbiased comparison of cost performance. I addition, the results are an indicator of building productivity based on costs per square metre of various construction types.

This research provides the Australian industry with robust data about the relative cost performance of various structural building frames. In addition, this research has wider implications because the models may also become useful data for the measuring relative cost performance in other countries.

Cost performance of multi-rise structures in Australia

The article discusses the findings of research on the cost performance of structural frames. The analysis conducted is based on a range of designs that are commonly found in 10-storey buildings in Australia. The study explored the best cost solutions for any particular project through generic cost models of steel, concrete, and formwork systems used in commercial buildings. The research concluded that the most important factor in choosing structural building frames would be the unique characteristics of individual projects.