Hydrodynamics and Heat Transfer in an Airlift Reactor

Työn teoriaosassa esitetään kirjallisuudessa esiintyviä teoreettisia ja kokeellisia yhtälöitä nesteen nopeuden, kaasun tilavuusosuuden, painehäviön ja lämmönsiirron laskemiseksi. Lisäksi käsitellään airlift-reaktoreiden toimintaa, rakennetta ja teollisia sovelluksia, sekä sekoitusta ja geometrian vaikutusta airlift-reaktoreiden hydrodynaamisiin ominaisuuksiin. Kokeellisessa osassa kuvataan käytetty koelaitteisto ja mittausmenetelmät sekä esitetään saadut koetulokset. Koelaitteisto on viidellä nousuputkella varustettu ulkoisen kierron airlift-reaktori. Kokeellisessa osassa pyritään ratkaisemaan tällaisessa reaktorissa mahdollisesti esiintyviä ongelmia, kuten "slug flown" muodostuminen nousuputkissa sekä fluidien epätasainen jakautuminen nousuputkiin. Lisäksi tutkitaan erilaisten muuttujien, kuten kaasun tilavuusvirran, nesteen viskositeetin, suutinkoon ja nesteen jakoputken rakenteen, vaikutusta kaasun tilavuusosuuteen ja nesteen nopeuteen nousuputkissa. Nesteen nopeudet mitataan merkkiainemenetelmällä ja kaasun tilavuusosuudet manometrimenetelmällä. Lämmönsiirtoa tutkitaan mittaamalla lämpötilaeroja nousuputkissa NiCr-Ni –termoelementeillä. Mittaustulosten perusteella muokataan korrelaatiot kaasun tilavuusosuudelle ja nesteen tyhjäputkinopeudelle. Korrelaatioista lasketut tulokset sopivat kohtuullisen hyvin yhteen mitattujen tulosten kanssa. "Slug flown" ei todettu muodostuvan ongelmaksi 2.5 mPa s pienemmillä viskositeetin arvoilla 2 metriä pitkissä ja 19 mm halkaisijaltaan olevissa putkissa. Lisäksi todettiin, että kaasu- ja nestefaasien jakautumisongelmat voidaan ratkaista rakenteellisesti.

Long-term outcomes following functional endoscopic sinus surgery in Samter's triad.

OBJECTIVE: This study aimed to assess the long-term outcome of functional endoscopic sinus surgery for Samter's triad patients using an objective visual analogue scale and nasal endoscopy. METHOD: Using a retrospective database, 33 Samter's triad patients who underwent functional endoscopic sinus surgery were evaluated pre- and post-operatively between 1987 and 2007 in Hospital of La Chaux-de-Fonds, Switzerland. RESULTS: A total of 33 patients participated in the study, and the mean follow-up period was 11.6 years (range 1.2-20 years). Patients were divided into two groups based on visual analogue scale scores of the five parameters with the greatest difference in intensity of symptoms between the beginning and end of follow up. Group 1 included patients with a mean visual analogue scale score of 6 and below at the end of follow up and group 2 included patients with a mean visual analogue scale score of more than 6. The only statistically significant difference noted between the two groups was the endonasal findings: stage III-IV polyposis was present in 1 out of 24 patients (4 per cent) in group 1 and in 5 out of 9 patients (56 per cent) in group 2. CONCLUSION: The results of our study indicate that functional endoscopic sinus surgery helps stabilise disease progression. Stage III-IV polyposis had a significant adverse effect on long-term outcome.

Comparison of Inoculation with the InoqulA and WASP Automated Systems with Manual Inoculation.

The quality of sample inoculation is critical for achieving an optimal yield of discrete colonies in both monomicrobial and polymicrobial samples to perform identification and antibiotic susceptibility testing. Consequently, we compared the performance between the InoqulA (BD Kiestra), the WASP (Copan), and manual inoculation methods. Defined mono- and polymicrobial samples of 4 bacterial species and cloudy urine specimens were inoculated on chromogenic agar by the InoqulA, the WASP, and manual methods. Images taken with ImagA (BD Kiestra) were analyzed with the VisionLab version 3.43 image analysis software to assess the quality of growth and to prevent subjective interpretation of the data. A 3- to 10-fold higher yield of discrete colonies was observed following automated inoculation with both the InoqulA and WASP systems than that with manual inoculation. The difference in performance between automated and manual inoculation was mainly observed at concentrations of >10(6) bacteria/ml. Inoculation with the InoqulA system allowed us to obtain significantly more discrete colonies than the WASP system at concentrations of >10(7) bacteria/ml. However, the level of difference observed was bacterial species dependent. Discrete colonies of bacteria present in 100- to 1,000-fold lower concentrations than the most concentrated populations in defined polymicrobial samples were not reproducibly recovered, even with the automated systems. The analysis of cloudy urine specimens showed that InoqulA inoculation provided a statistically significantly higher number of discrete colonies than that with WASP and manual inoculation. Consequently, the automated InoqulA inoculation greatly decreased the requirement for bacterial subculture and thus resulted in a significant reduction in the time to results, laboratory workload, and laboratory costs.

International survey of acute stroke imaging used to make revascularization treatment decisions.

BACKGROUND: To assess the differences across continental regions in terms of stroke imaging obtained for making acute revascularization therapy decisions, and to identify obstacles to participating in randomized trials involving multimodal imaging. METHODS: STroke Imaging Repository (STIR) and Virtual International Stroke Trials Archive (VISTA)-Imaging circulated an online survey through its website, through the websites of national professional societies from multiple countries as well as through email distribution lists from STIR and the above mentioned societies. RESULTS: We received responses from 223 centers (2 from Africa, 38 from Asia, 10 from Australia, 101 from Europe, 4 from Middle East, 55 from North America, 13 from South America). In combination, the sites surveyed administered acute revascularization therapy to a total of 25,326 acute stroke patients in 2012. Seventy-three percent of these patients received intravenous (i.v.) tissue plasminogen activator (tPA), and 27%, endovascular therapy. Vascular imaging was routinely obtained in 79% (152/193) of sites for endovascular therapy decisions, and also as part of standard IV tPA treatment decisions at 46% (92/198) of sites. Modality, availability and use of acute vascular and perfusion imaging before revascularization varied substantially between geographical areas. The main obstacles to participate in randomized trials involving multimodal imaging included: mainly insufficient research support and staff (50%, 79/158) and infrequent use of multimodal imaging (27%, 43/158) . CONCLUSION: There were significant variations among sites and geographical areas in terms of stroke imaging work-up used tomake decisions both for intravenous and endovascular revascularization. Clinical trials using advanced imaging as a selection tool for acute revascularization therapy should address the need for additional resources and technical support, and take into consideration the lack of routine use of such techniques in trial planning.

Interaktiivisen asiakasrajapinnan mahdollistamat energiatehokkuutta tukevat toiminnot ja niiden kannattavuus

Automaattisen mittarinluvun yleistyminen ja asiakkaan verkkoliitynnässä käytettävän tekniikan kehittyminen luovat pohjan uudentyyppisen interaktiivisen asiakasrajanpinnan synnylle. Se voi osaltaan mahdollistaa asiakkaan entistä joustavamman sähköverkkoon liitynnän sekä nykyistä reaaliaikaisemmat ja tarkemmat mittaukset. Näiden pohjalle on mahdollista kehittää erilaisia energiatehokkuutta tukevia toimintoja ja niihin perustuvia palveluita. Tämän työn tarkoituksena on tutkia interaktiivisen asiakasrajapinnan mahdollistamia energiatehokkuutta tukevia toimintoja. Lupaavimpia toimintoja, niiden kannattavuutta ja potentiaalia energiatehokkuuden parantamisessa analysoidaan tarkemmin. Lisäksi tarkastellaan niihin tarvittavaa tekniikkaa, mittaustietoja ja tiedonsiirtoa. Nykyinen tekniikka mahdollistaa useiden erilaisten energiatehokkuutta tukevien toimintojen toteuttamisen. Tässä työssä käsiteltiin tarkemmin energiayhtiön AMR-pohjaista tasehallintaa ja sähkön pienkuluttajien hintaohjausta. AMR-pohjaisen tasehallinnan havaittiin olevan oikein kohdennettuna kannattavaa. Sähkön hintaohjaus voi laajassa mittakaavassa toteutettuna olla kannattavaa, mutta yksittäiskohteissa sen toteutuksen kustannukset ovat liian suuret. Suurimpia ongelmia energiatehokkuutta tukevien toimintojen toteutuksen kannalta muodostavat usein kiinteät kustannukset sekä yleisten rajapin-tavaatimusten ja toimintamallien puute. Tuotteiden standardointi, sarjatuotanto sekä tekniikan kehittyminen voivat mahdollistaa kiinteiden kustannusten huomattavan pienenemisen ja tätä kautta toimintojen kustannustehokkuuden paranemisen. Kehittämällä uusia yhteisiä toimintamalleja ja tuotteita voidaan käytettävissä olevaa tekniikkaa hyödyntää tehokkaammin. Myös uudet näköpiirissä olevat nopeammat ja luotettavammat tiedonsiirtotekniikat voivat mahdollistaa reaaliaikaisemmat mittaustietojen ja signaalien välitykset, mikä usein parantaa toimintojen tehokkuutta ja kannattavuutta.

Tratamento de dados censurados em estudos ambientais

Due to the inherent limitations of the analytical methods of measurement, environmental exposure data often present observations described as below a certain detection limit, also called left-censored data. Censored data directly interferes in almost all types of statistical analyzes, including descriptive parameters, hypothesis testing, confidence intervals, correlations and regressions. In this work, we investigated the performance of the main classes of methods from major publications available in the literature, considering their advantages and limitations. Some criteria for selecting the best method of dealing with censored data are presented.

On the impact of rigorous approaches on the quality of development

Software systems are expanding and becoming increasingly present in everyday activities. The constantly evolving society demands that they deliver more functionality, are easy to use and work as expected. All these challenges increase the size and complexity of a system. People may not be aware of a presence of a software system, until it malfunctions or even fails to perform. The concept of being able to depend on the software is particularly significant when it comes to the critical systems. At this point quality of a system is regarded as an essential issue, since any deficiencies may lead to considerable money loss or life endangerment. Traditional development methods may not ensure a sufficiently high level of quality. Formal methods, on the other hand, allow us to achieve a high level of rigour and can be applied to develop a complete system or only a critical part of it. Such techniques, applied during system development starting at early design stages, increase the likelihood of obtaining a system that works as required. However, formal methods are sometimes considered difficult to utilise in traditional developments. Therefore, it is important to make them more accessible and reduce the gap between the formal and traditional development methods. This thesis explores the usability of rigorous approaches by giving an insight into formal designs with the use of graphical notation. The understandability of formal modelling is increased due to a compact representation of the development and related design decisions. The central objective of the thesis is to investigate the impact that rigorous approaches have on quality of developments. This means that it is necessary to establish certain techniques for evaluation of rigorous developments. Since we are studying various development settings and methods, specific measurement plans and a set of metrics need to be created for each setting. Our goal is to provide methods for collecting data and record evidence of the applicability of rigorous approaches. This would support the organisations in making decisions about integration of formal methods into their development processes. It is important to control the software development, especially in its initial stages. Therefore, we focus on the specification and modelling phases, as well as related artefacts, e.g. models. These have significant influence on the quality of a final system. Since application of formal methods may increase the complexity of a system, it may impact its maintainability, and thus quality. Our goal is to leverage quality of a system via metrics and measurements, as well as generic refinement patterns, which are applied to a model and a specification. We argue that they can facilitate the process of creating software systems, by e.g. controlling complexity and providing the modelling guidelines. Moreover, we find them as additional mechanisms for quality control and improvement, also for rigorous approaches. The main contribution of this thesis is to provide the metrics and measurements that help in assessing the impact of rigorous approaches on developments. We establish the techniques for the evaluation of certain aspects of quality, which are based on structural, syntactical and process related characteristics of an early-stage development artefacts, i.e. specifications and models. The presented approaches are applied to various case studies. The results of the investigation are juxtaposed with the perception of domain experts. It is our aspiration to promote measurements as an indispensable part of quality control process and a strategy towards the quality improvement.

Reaaliaikaisen PMU-mittaustiedon hyödyntäminen voimajärjestelmän valvonnassa

Tämä työ on tehty Fingrid Oyj:lle. Työn tavoitteena oli tutkia, miten reaaliaikaista PMU-mittaustietoa voidaan hyödyntää voimajärjestelmän valvonnassa. Voimajärjestelmän dynaamisia ilmiöitä ovat jännite- ja kulmastabiilius. Työssä tutkittiin voimajärjestelmän kulmastabiiliutta PSS/E-ohjelmalla simuloitujen mittaustulosten perusteella. Fouriermuunnoksen tulokset osoittavat, että huonoiten vaimeneva taajuuskomponentti on 0,3 Hz taajuus. Lisäksi tiedetään, että huonosti vaimeneva taajuuskomponentti rajoittaa siirtokapasiteettia. Voimajärjestelmän stabiiliutta voidaan esittää Wide Area Monitoring -järjestelmien (WAMS) avulla. WAMS perustuu Phasor Measurement -laitteen (PMU) reaaliaikaiseen mittaustekniikkaan. Jännitteen vaihekulman mittaaminen mahdollistaa voimajärjestelmän tilan määrittämisen reaaliajassa. Työssä on esitelty Fingridin käytössä oleva WAMS ja lisäksi esitelty kolmen eri laitetoimittajan WAMS:n rakennetta ja operaattorin käyttöön tarkoitettuja käyttöliittymiä. WAMS:n rakenteet ovat pääpiirteittäin samanlaisia, mutta stabiiliuden visuaalisessa esittämisessä on eroja. PMU -mittaustietoja on mahdollista tuoda käytönvalvontajärjestelmään erillisellä tiedonsiirtoprotokollalla. PMU-mittaustiedon hyödyntäminen käytönvalvontajärjestelmän toimintaaluenäytöllä mahdollistaa verkon tilan esittämisen reaaliajassa. Roottorin kulmastabiilius esitetään Fingridin käytönvalvontajärjestelmässä vaihekulmaerojen avulla ja työssä on esitetty, kuinka vaihekulmaeron arvolla on vaikutus tehonsiirtoon. Vaihekulmaeron arvo kuvaa vian jälkeisen tehoheilahtelun voimakkuutta. PMU-mittaustiedon esittäminen antaa operaattorille selkeämmän kuvan ylläpitää tehonsiirto turvallisella tasolla ja epästabiilin heilahtelun havainnoiminen vähentää suurhäiriön riskiä. Tulevaisuudessa siirtoverkon kehittyessä tarvitaan operaattorin käyttöön myös nopeita stabiilisuutta esittäviä työkaluja.

Accuracy improvement of a demand forecasting model

This research concerns different statistical methods that assist to increase the demand forecasting accuracy of company X’s forecasting model. Current forecasting process was analyzed in details. As a result, graphical scheme of logical algorithm was developed. Based on the analysis of the algorithm and forecasting errors, all the potential directions for model future improvements in context of its accuracy were gathered into the complete list. Three improvement directions were chosen for further practical research, on their basis, three test models were created and verified. Novelty of this work lies in the methodological approach of the original analysis of the model, which identified its critical points, as well as the uniqueness of the developed test models. Results of the study formed the basis of the grant of the Government of St. Petersburg.

Mesure des champs de radiation dans le détecteur ATLAS et sa caverne avec les détecteurs au silicium à pixels ATLAS-MPX

Les collisions proton-proton produites par le LHC imposent un environnement radiatif hostile au détecteur ATLAS. Afin de quantifier les effets de cet environnement sur la performance du détecteur et la sécurité du personnel, plusieurs simulations Monte Carlo ont été réalisées. Toutefois, la mesure directe est indispensable pour suivre les taux de radiation dans ATLAS et aussi pour vérifier les prédictions des simulations. À cette fin, seize détecteurs ATLAS-MPX ont été installés à différents endroits dans les zones expérimentale et technique d'ATLAS. Ils sont composés d'un détecteur au silicium à pixels appelé MPX dont la surface active est partiellement recouverte de convertisseurs de neutrons thermiques, lents et rapides. Les détecteurs ATLAS-MPX mesurent en temps réel les champs de radiation en enregistrant les traces des particules détectées sous forme d'images matricielles. L'analyse des images acquises permet d'identifier les types des particules détectées à partir des formes de leurs traces. Dans ce but, un logiciel de reconnaissance de formes appelé MAFalda a été conçu. Étant donné que les traces des particules fortement ionisantes sont influencées par le partage de charge entre pixels adjacents, un modèle semi-empirique décrivant cet effet a été développé. Grâce à ce modèle, l'énergie des particules fortement ionisantes peut être estimée à partir de la taille de leurs traces. Les convertisseurs de neutrons qui couvrent chaque détecteur ATLAS-MPX forment six régions différentes. L'efficacité de chaque région à détecter les neutrons thermiques, lents et rapides a été déterminée par des mesures d'étalonnage avec des sources connues. L'étude de la réponse des détecteurs ATLAS-MPX à la radiation produite par les collisions frontales de protons à 7TeV dans le centre de masse a montré que le nombre de traces enregistrées est proportionnel à la luminosité du LHC. Ce résultat permet d'utiliser les détecteurs ATLAS-MPX comme moniteurs de luminosité. La méthode proposée pour mesurer et étalonner la luminosité absolue avec ces détecteurs est celle de van der Meer qui est basée sur les paramètres des faisceaux du LHC. Vu la corrélation entre la réponse des détecteurs ATLAS-MPX et la luminosité, les taux de radiation mesurés sont exprimés en termes de fluences de différents types de particules par unité de luminosité intégrée. Un écart significatif a été obtenu en comparant ces fluences avec celles prédites par GCALOR qui est l'une des simulations Monte Carlo du détecteur ATLAS. Par ailleurs, les mesures effectuées après l'arrêt des collisions proton-proton ont montré que les détecteurs ATLAS-MPX permettent d'observer la désintégration des isotopes radioactifs générés au cours des collisions. L'activation résiduelle des matériaux d'ATLAS peut être mesurée avec ces détecteurs grâce à un étalonnage en équivalent de dose ambiant.

Mesures et analyses de la luminosité d’ATLAS grâce aux détecteurs MPX

Medipix2 (MPX) sont des détecteurs semi-conducteurs au silicium montés sur 256x256 pixels. Chaque pixel a une aire de 55x55μm2. L’aire active d’un détecteur MPX est d’environ 2 cm2. Avec deux modes de détection, un seuil et un temps d’exposition ajustables, leur utilisation peut être optimisée pour une analyse spécifique. Seize de ces détecteurs sont présentement installés dans l’expérience ATLAS (A Toroidal LHC ApparatuS) au CERN (Organisation Européenne pour la Recherche Nucléaire). Ils mesurent en temps réel le champ de radiation dû aux collisions proton-proton, au point d’interaction IP1 (Point d’Interaction 1) du LHC (Grand Collisionneur d’Hadrons). Ces mesures ont divers buts comme par exemple la mesure du champ de neutrons dans la caverne d’ATLAS. Le réseau de détecteurs MPX est complètement indépendant du détecteur ATLAS. Le groupe ATLAS-Montréal s’est intéressé à l’analyse des données récoltées par ces détecteurs pour calculer une valeur de la luminosité du LHC au point de collision des faisceaux, autour duquel est construit le détecteur ATLAS. Cette valeur est déterminée indépendamment de la luminosité mesurée par les divers sous-détecteurs d’ATLAS dédiés spécifiquement à la mesure de la luminosité. Avec l’augmentation de la luminosité du LHC les détecteurs MPX les plus proches du point d’interaction détectent un grand nombre de particules dont les traces sont impossibles à distinguer sur les images ("frames") obtenues, à cause de leur recouvrement. Les paramètres de mesure de certains de ces détecteurs ont été optimisés pour des mesures de luminosité. Une méthode d’analyse des données permet de filtrer les pixels bruyants et de convertir les données des images, qui correspondent à des temps d’exposition propres aux détecteurs MPX, en valeur de luminosité pour chaque LumiBlock. Un LumiBlock est un intervalle de temps de mesure propre au détecteur ATLAS. On a validé les mesures de luminosité premièrement en comparant les résultats obtenus par différents détecteurs MPX, et ensuite en comparant les valeurs de luminosité relevées à celles obtenues par les sous-détecteurs d’ATLAS dédiés spécifiquement à la mesure de la luminosité.

Applications of cardanol in rubber processing

This research project explores the utilization of cardanol in various capacities for rubber processing. Cardanol is a phenol with a long side chain in the meta position of the benzene ring. It is obtained by the vacuum distillation of cashew Hut shell liquid (CNSL) which is a cheap agro-byproduct. In this study, the plasticizer property of cardanol was investigated in silica filled and HAF black filled NR, NBR, EPDM and CR by comparing cure characteristics and mechanical properties of vulcanizates containing conventional plasticizer with those containing cardanol as plasticizer. The co-activator, antioxidant and accelerator properties were investigated in gum samples of NR, NBR, EPDM and CR by comparing the properties of vulcanizates which contain conventional co-activator, antioxidant and accelerator with those in which each of them was replaced by cardanol. The general effectiveness of cardanol was investigated by determination of cure time , measurement of physical and mechanical properties, ageing studies, crosslink density, extractability, FTIR spectra, TGA etc.The results show that cardanol can be a substitute for aromatic oil in both silica filled and HAF black filled NR. Again, it can replace dioctyl phthalate in both silica filled and HAF black filled NBR. Similarly, cardanol Can replace naphthenic oil in silica filled as well as HAF black filled EPDM and CR. The cure characteristics and mechanical properties are comparable in all the eight cases. The co-activator property of cardanol is comparable to stearic acid in all the four rubbers. The cure characteristics and mechanical properties in this case are also comparable. The antioxidant ,property of cardanol is comparable to TQ in all the four rubbers. The antioxidant property of cardanol is comparable to TQ in all the four case of NBR and EPDM.The accelerator property of cardarlol is comparable with CBS in the case of NBR and EPDM. No accelerator property is observed in the case of NR. The accelerator property of cardanol in CR is not negligible when compared with TMTD.

How do domestic policies affect the integration of Ethiopian fertiliser markets with world markets?

Frequent shifts in policy on fertiliser markets have occurred in Ethiopia with the aim of facilitating both physical and economic access of farmers to fertiliser. The last shift was the introduction of a monopoly on each stage of the supply chain in 2008. Furthermore, government control of prices and margins as well as stockholding programmes are also present on the markets. This paper evaluates the effect of these policies on the integration of domestic with world markets of fertiliser, using cointegration methods. Time series data of diammonium phosphate (DAP) and urea prices on world, import and retail markets between 1971 and 2012 are used. The findings show high transmission of price signals from world markets to import prices for both DAP and urea. However, between import and retail prices there is no evidence of cointegration for urea, while for DAP full price transmission is concluded. In the retail market, domestic transaction costs associated with storing large volumes of fertiliser act as a buffer between import and retail prices, especially for urea. Therefore, economic benefits could be achieved by reducing the size of stocks and revising the demand estimation process.

In vitro cumulative gas production techniques: History, methodological considerations and challenges

Methodology used to measure in vitro gas production is reviewed to determine impacts of sources of variation on resultant gas production profiles (GPP). Current methods include measurement of gas production at constant pressure (e.g., use of gas tight syringes), a system that is inexpensive, but may be less sensitive than others thereby affecting its suitability in some situations. Automated systems that measure gas production at constant volume allow pressure to accumulate in the bottle, which is recorded at different times to produce a GPP, and may result in sufficiently high pressure that solubility of evolved gases in the medium is affected, thereby resulting in a recorded volume of gas that is lower than that predicted from stoichiometric calculations. Several other methods measure gas production at constant pressure and volume with either pressure transducers or sensors, and these may be manual, semi-automated or fully automated in operation. In these systems, gas is released as pressure increases, and vented gas is recorded. Agitating the medium does not consistently produce more gas with automated systems, and little or no effect of agitation was observed with manual systems. The apparatus affects GPP, but mathematical manipulation may enable effects of apparatus to be removed. The amount of substrate affects the volume of gas produced, but not rate of gas production, provided there is sufficient buffering capacity in the medium. Systems that use a very small amount of substrate are prone to experimental error in sample weighing. Effect of sample preparation on GPP has been found to be important, but further research is required to determine the optimum preparation that mimics animal chewing. Inoculum is the single largest source of variation in measuring GPP, as rumen fluid is variable and sampling schedules, diets fed to donor animals and ratios of rumen fluid/medium must be selected such that microbial activity is sufficiently high that it does not affect rate and extent of fermentation. Species of donor animal may also cause differences in GPP. End point measures can be mathematically manipulated to account for species differences, but rates of fermentation are not related. Other sources of inocula that have been used include caecal fluid (primarily for investigating hindgut fermentation in monogastrics), effluent from simulated rumen fermentation (e.g., 'Rusitec', which was as variable as rumen fluid), faeces, and frozen or freeze-dried rumen fluid (which were both less active than fresh rumen fluid). Use of mixtures of cell-free enzymes, or pure cultures of bacteria, may be a way of increasing GPP reproducibility, while reducing reliance on surgically modified animals. However, more research is required to develop these inocula. A number of media have been developed which buffer the incubation and provide relevant micro-nutrients to the microorganisms. To date, little research has been completed on relationships between the composition of the medium and measured GPP. However, comparing GPP from media either rich in N or N-free, allows assessment of contributions of N containing compounds in the sample. (c) 2005 Published by Elsevier B.V.

The use of bioluminescence for monitoring in planta growth dynamics of a Pseudomonas syringae plant pathogen

The use of bioluminescence was evaluated as a tool to study Pseudomonas syringae population dynamics in susceptible and resistant plant environments. Plasmid pGLITE, containing the luxCDABE genes from Photorhabdus luminescens, was introduced into Pseudomonas syringae pv. phaseolicola race 7 strain 1449B, a Gram-negative pathogen of bean (Phaseolus vulgaris). Bacteria recovered from plant tissue over a five-day period were enumerated by counting numbers of colony forming units and by measurement of bioluminescence. Direct measurement of bioluminescence from leaf disc homogenates consistently reflected bacterial growth as determined by viable counting, but also detected subtle effects of the plant resistance response on bacterial viability. This bioluminescence procedure enables real time measurement of bacterial metabolism and population dynamics in planta, obviates the need to carry out labour intensive and time consuming traditional enumeration techniques and provides a sensitive assay for studying plant effects on bacterial cells.