Methanol laser line assignments: evidence of four-level laser systems

The Ritz computer program, developed for facilitating the assignment of molecular Fourier transform absorption spectra and described in a previous work, determines the energy level values involved in the assigned transitions by the Rydberg-Ritz combination principle. Combining the data obtained from the analyses of high-resolution infrared (IR) and far-infrared (FIR) spectra, it is possible to predict possible FIR laser emissions of molecules. In the present work we have applied this method to the common isotopomer methanol, 12CH3 16OH, and obtained 14 proposed assignments for previously unassigned FIR laser lines. We also predict 15 possible new FIR laser emissions. For the first time, an assignment involving a four-level laser system with collisional population transfer to a slightly higher energy level is reported. © 1998 Academic Press.

Methanol oxidation on PtRu/C electrocatalysts prepared by a microemulsion method

PtRu/C nanocatalysts were prepared by a microemulsion method using different values of water/surfactant molar ratio in order to get different particle sizes. Crystallite sizes and structural properties were determined by X-ray diffraction. Particle size and distribution were characterized by transmission electron microscopy and average composition was determined by energy dispersive X-ray analysis. Differential scanning calorimetry measurements indicated the presence of oxides in the as-prepared catalysts. The general electrochemical behavior was evaluated by cyclic voltammetry in 0.5 M sulfuric acid and the electrocatalytic activity towards the oxidation of methanol was studied in 0.5 M methanol acid solutions by potential sweeps and chronoamperometry. copyright The Electrochemical Society.

Effects of heat treatments on the electrocatalytic activity of Pt-Ru/C for methanol oxidation

The Pt-Ru/C materials of this study were prepared by a microemulsion method with fixed water to surfactant molar ratio and heat treated at low temperatures, to avoid changes in the average particle size, in different atmospheres. All samples were characterized by X-ray diffraction (XRD) and the mean crystallite size was estimated by using Scherrer's equation. Catalysts morphology was characterized by transmission electron microscopy (TEM). Average composition was obtained by energydispersive X-ray analysis (EDX). The general electrochemical behavior was evaluated by cyclic voltammetry in 0.5 M sulfuric acid and the electrocatalytic activity towards the oxidation of methanol was studied in 0.5 M methanol acid solutions by potential sweeps and chronoamperometry. Oxidation of adsorbed CO was used to estimate the electrochemical active area and to infer the surface properties. ©The Electrochemical Society.

Characterization of flavonoids and naphthopyranones in methanol extracts of Paepalanthus chiquitensis herzog by HPLC-ESI-IT-MSn and their mutagenic activity

A HPLC-ESI-IT-MSn method, based on high-performance liquid chromatography coupled to electrospray negative ionization multistage ion trap mass spectrometry, was developed for rapid identification of 24 flavonoid and naphthopyranone compounds. The methanol extracts of the capitulae and scapes of P. chiquitensis exhibited mutagenic activity in the Salmonella/microsome assay, against strain TA97a. © 2013 by the authors.

Electrochemical behavior of ruthenium-hexacyanoferrate modified glassy carbon electrode and catalytic activity towards ethanol electrooxidation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Antioxidant capacity and biological activity of essential oil and methanol extract of Conobea scoparioides (Cham. & Schltdl.) Benth

Os óleos essenciais da planta sub-aquática Conobea scoparioides (fresca e previamente seca) apresentaram rendimentos de 3,4 e 3,3%, respectivamente. Os principais constituintes identificados foram o éter metílico do timol (39,6 e 47,7%), timol (40,0 e 26,4%), α-felandreno (12,1 e 14,3%) e p-cimeno (1,5 e 1,7%), totalizando mais de 90% nos referidos óleos. A concentração de seqüestro do radical DPPH (CE50) dos óleos e extrato foi de 46,7 ± 3,6 µg mL^-1 para a planta fresca (CsO-f), de 56,1 ± 2,4 µg mL^-1 para a planta seca (CsO-d), e de 23,0 ± 2,2 µg mL^-1 para o extrato metanólico (CsE-d). O valor do extrato é comparável ao BHT (19,8 ± 0,5 µg mL^-1), usado como padrão antioxidante. O valor médio dos óleos é duas vezes menor, mas igualmente importante como agente antioxidante. O teor de Fenólicos Totais (TP, 124,6 ± 8,7 mg GAE per g) e o Trolox Equivalente (TEAC, 144,1 ± 4,9 mg TE per g) do extrato metanólico confirmaram a significativa atividade antioxidante de C. scoparioides. Da mesma forma, nos bioensaios com larva de camarão (Artemia salina) o valor médio da concentração letal dos óleos (CL₅₀, 7,7 ± 0,3 µg mL^-1) foi dez vezes maior que no extrato metanólico (CL₅₀, 77,6 ± 7,1 µg mL^-1) mostrando importante atividade biológica.

Antioxidant capacity and biological activity of essential oil and methanol extract of Hyptis crenata Pohl ex Benth

O óleo essencial das folhas e ramos finos frescos e secos de Hyptis crenata forneceu os seguintes rendimentos, 1,4% e 0,9%. Os constituintes voláteis principais foram α-pineno (22,0%; 19,5%), 1,8-cineol (17,6%; 23,2%), β-pineno (17,0%: 13,8%), cânfora (4,7%; 11,6%), limoneno (5,4%; 4,4%) e γ-terpineno (3,5%; 2,4%), totalizando mais de 70% nos óleos. A atividade de seqüestro do radical DPPH para o extrato metanólico (CE₅₀, 16,7 + 0,4 µg/mL) foi comparável ao do BHT (19,8 ± 0,5 µg/mL) mostrando uma significante atividade antioxidante. Os óleos apresentaram baixa atividade. O teor de fenólicos totais (TP, 373,0 + 15,9 mg GAE/g) e equivalente trolox (TEAC, 226,8 + 0,5 mg TE/g) confirmaram a atividade antioxidante do extrato metanólico, que pode ser atribuída à presença de compostos fenólicos polares. No teste com larvas de camarão as concentrações letais para o óleo e extrato metanólico foram 6,7 + 0,2 µg/mL e 13,0 + 3,7 µg/mL, respectivamente, fornecendo importante evidência de suas atividade biológicas.

Anti-inflammatory and opioid-like activities in methanol extract of Mikania lindleyana, sucuriju

ABSTRACT: Mikania lindleyana DC., Asteraceae (sucuriju), grows in the Amazon region, where is frequently used to treat pain, inflammatory diseases and scarring. This study was carried out to investigate phytochemical profile accompanied by in vivo antinociceptive and anti-inflammatory screening of n-hexane (HE), dichloromethane (DME) and methanol (ME) extracts obtained from the aerial parts of the plant. The oral administration of ME (0.1, 0.3, 1 g/kg) caused a dose-related reduction (16.2, 42.1 e 70.2%) of acetic acid-induced abdominal writhing while HE and DME (1 g/kg, p.o.) were ineffective. In the hot plate test, ME (300 mg/kg, p.o.) increased the latency of heat stimulus between 30 and 120 min and inhibited the first (45%) and second (60%) phases of nociception in the formalin test. The antinociception induced by ME or positive control fentanyl (150 µg/kg, s.c.) in hot plate and formalin tests was prevented by naloxone (3 mg/kg, s.c.). When submitted to the carrageenan-induced peritonitis test, ME (0.5, 1.0, 2.0 g/kg, p.o.) impaired leukocyte migration into the peritoneal cavity by 46.8, 59.4 and 64.8% respectively, while positive control dexamethasone (2 mg/kg, s.c.), inhibited leukocyte migration by 71.1%. These results indicate that the antinociception obtained after oral administration of methanol extract of M. lindleyana involves anti-inflammatory mechanisms accompanied with opioid-like activity which could explain the use of the specie for pain and inflammatory diseases.

Sugars Electrooxidation at Glassy Carbon Electrode Decorate with Multi-Walled Carbon Nanotubes with Nickel Oxy-Hydroxide

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

PEDOT:PSS self-assembled films to methanol crossover reduction in Nafion (R) membranes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

An optimization study of PtSn/C catalysts applied to direct ethanol fuel cell: Effect of the preparation method on the electrocatalytic activity of the catalysts

The aim of this work was to perform a systematic study of the parameters that can influence the composition, morphology, and catalytic activity of PtSn/C nanoparticles and compare two different methods of nanocatalyst preparation, namely microwave-assisted heating (MW) and thermal decomposition of polymeric precursors (DPP). An investigation of the effects of the reducing and stabilizing agents on the catalytic activity and morphology of Pt75Sn25/C catalysts prepared by microwave-assisted heating was undertaken for optimization purposes. The effect of short-chain alcohols such as ethanol, ethylene glycol, and propylene glycol as reducing agents was evaluated, and the use of sodium acetate and citric acid as stabilizing agents for the MW procedure was examined. Catalysts obtained from propylene glycol displayed higher catalytic activity compared with catalysts prepared in ethylene glycol. Introduction of sodium acetate enhanced the catalytic activity, but this beneficial effect was observed until a critical acetate concentration was reached. Optimization of the MW synthesis allowed for the preparation of highly dispersed catalysts with average sizes lying between 2.0 and 5.0 nm. Comparison of the best catalyst prepared by MW with a catalyst of similar composition prepared by the polymeric precursors method showed that the catalytic activity of the material can be improved when a proper condition for catalyst preparation is achieved. (C) 2012 Elsevier B.V. All rights reserved.

Experimental Assessment of the Sensitiveness of an Electrochemical Oscillator towards Chemical Perturbations

In this study we address the problem of the response of a (electro)chemical oscillator towards chemical perturbations of different magnitudes. The chemical perturbation was achieved by addition of distinct amounts of trifluoromethanesulfonate (TFMSA), a rather stable and non-specifically adsorbing anion, and the system under investigation was the methanol electro-oxidation reaction under both stationary and oscillatory regimes. Increasing the anion concentration resulted in a decrease in the reaction rates of methanol oxidation and a general decrease in the parameter window where oscillations occurred. Furthermore, the addition of TFMSA was found to decrease the induction period and the total duration of oscillations. The mechanism underlying these observations was derived mathematically and revealed that inhibition in the methanol oxidation through blockage of active sites was found to further accelerate the intrinsic non-stationarity of the unperturbed system. Altogether, the presented results are among the few concerning the experimental assessment of the sensitiveness of an oscillator towards chemical perturbations. The universal nature of the complex chemical oscillator investigated here might be used for reference when studying the dynamics of other less accessible perturbed networks of (bio)chemical reactions.

Effects of catalyst load in Pt and Pb-based catalysts using formic acid oxidation as a model

In this paper, we discuss the effects of catalyst load with respect to carbon powder for several Pt and Pb-based catalysts, using formic acid as a model molecule. The discussion is based on electrochemical tests, a complete morphological investigation and theoretical calculations. We show that the Pt and Pb-based catalysts presented activity in formic acid oxidation at very low catalyst loads (e.g., 0.5% in respect to the carbon content). Physical characterisations demonstrate that the electrodes are composed of separated phases of Pt and lead distributed in Pt nanometric-sized islands that are heterogeneously dispersed on the carbon support and Pb ultra-small particles homogeneously distributed throughout the entire carbon surface, as demonstrated by the microscopy studies. At high catalyst loads, very large clusters of Pb(x)O(y) could be observed. Electrochemical tests indicated an increase in the apparent resistance of the system (by a factor of 19.7 Omega) when the catalyst load was increased. The effect of lead in the materials was also studied by theoretical calculations (OFT). The main conclusion is that the presence of Pb atoms in the catalyst can improve the adsorption of formic acid in the catalytic system compared with a pure Pt-based catalyst. (C) 2011 Elsevier B.V. All rights reserved.

Effect of hydrogen bond formation on the elastic molecular scattering: a case study with methanol

Rayleigh optical activities of small hydrogen-bonded methanol clusters containing two to five molecules are reported. For the methanol trimer, tetramer, and pentamer both cyclic and linear structures are considered. After the geometry optimizations, the dipole moments and the dipole polarizabilities (mean, interaction, and anisotropic components) are calculated using HF, MP2 and DFT (B3LYP, B3P86 and BH&HLYP) with aug-cc-pVDZ extended basis set. The polarizabilities are used to analyse the depolarization ratios and the Rayleigh scattering activities. The variations in the activity and in the depolarization for Rayleigh scattered radiation with the increase in the cluster size for both cyclic and linear structures are analysed.

PtSnIr/C Anode Electrocatalysts: Promoting Effect in Direct Ethanol Fuel Cells

This study investigates the promoting effect of PtSnIr/C (1:1:1) electrocatalyst anode, prepared by polymeric precursor method, on the ethanol oxidation reaction in a direct ethanol fuel cell (DEFC). All of the materials used were 20% metal m/m on carbon. X-ray photoelectron spectroscopy (XPS) analysis showed the presence of Pt, PtOH2, PtO2, SnO2 and IrO2 at the electrocatalyst surface, indicating a possible decorated particle structure. X-ray diffractometry (XRD) analysis indicated metallic Pt and Ir as well as the formation of an alloy with Sn. Using the PtSnIr/C electrocatalyst prepared here with two times lower loading of Pt than PtSn/C E-tek electrocatalyst, it was possible to obtain the same maximum power density found for the commercial material. The main reaction product was acetic acid probably due to the presence of oxides, in this point the bifunctional mechanism is predominant, but an electronic effect should not be discarded.