A Method of Preparing Future Hourly Weather Data for the Study of Global Warming Impact on the Built Environment

The dynamic interaction between building systems and external climate is extremely complex, involving a large number of difficult-to-predict variables. In order to study the impact of global warming on the built environment, the use of building simulation techniques together with forecast weather data are often necessary. Since all building simulation programs require hourly meteorological input data for their thermal comfort and energy evaluation, the provision of suitable weather data becomes critical. Based on a review of the existing weather data generation models, this paper presents an effective method to generate approximate future hourly weather data suitable for the study of the impact of global warming. Depending on the level of information available for the prediction of future weather condition, it is shown that either the method of retaining to current level, constant offset method or diurnal modelling method may be used to generate the future hourly variation of an individual weather parameter. An example of the application of this method to the different global warming scenarios in Australia is presented. Since there is no reliable projection of possible change in air humidity, solar radiation or wind characters, as a first approximation, these parameters have been assumed to remain at the current level. A sensitivity test of their impact on the building energy performance shows that there is generally a good linear relationship between building cooling load and the changes of weather variables of solar radiation, relative humidity or wind speed.

New parameters for daytime wandering

This study aimed to describe wandering using new parameters and to evaluate parameters as a function of cognitive impairment and mobility. Forty-four wanderers in long-term care settings were videotaped 12 times. Rate and duration of wandering episodes were plotted and used to derive parameters from values above and below case medians, proportion of hours wandering, and time of day. Participants wandered during 47% of observations; on average, the hourly rate was 4.3 episodes, the peak hourly rate was 18 episodes, and the peak hourly duration was 19.9 minutes. Mini-Mental State Examination (MMSE) scores was negatively correlated with overall duration and number of observations during which duration exceeded 15 minutes per hour, was positively correlated with number of observations without wandering, and was not significantly correlated with rate-related parameters. Mobility correlated positively with rate and duration parameters. Interaction of MMSE score and mobility was the strongest predictor of wandering duration. Parameters derived from repeated measures provide a new view of daytime wandering and insight into relationships between MMSE score and mobility status with specific parameters of wandering.

Same-sex intimate partner violence : exploring the parameters

Intimate partner violence (IPV) is not only a problem for heterosexual couples. Although research in the area is beset by methodological and definitional problems, studies generally demonstrate that IPV also affects those who identify as non-heterosexual; that is, those sexualities that are typically categorized as lesbian, gay, bisexual, transgender, or intersex (LGBTI). IPV appears to be at least as prevalent in LGBTI relationships as it is in heterosexual couples, and follows similar patterns (e.g. Australian Research Centre on Sex, Health and Society 2006; Donovan et al. 2006; Chan 2005; Craft and Serovich 2005; Burke et al. 2002; Jeffries and Ball 2008; Kelly and Warshafsky 1987; Letellier 1994; Turrell 2000; Ristock 2003; Vickers 1996). There is, however, little in the way of specific community or social services support available to either victims or perpetrators of violence in same-sex relationships (see Vickers 1996). In addition, there are important differences in the experience of IPV between LGBTI and non-LGBTI victims, and even among LGBTI individuals; for example, among transgender populations (Chan 2005), and those who are HIV sero-positive (Craft and Serovich 2005). These different experiences of IPV include the use of HIV and the threat of “outing” a partner as tools of control, as just two examples (Jeffries and Ball 2008; Salyer 1999; WA Government 2008b). Such differences impact on how LGBTI victims respond to the violence, including whether or not and how they seek help, what services they are able to avail themselves of, and how likely they are to remain with, or return to, their violent partners (Burke et al. 2002). This chapter explores the prevalent heteronormative discourses that surround IPV, both within the academic literature, and in general social and government discourses. It seeks to understand how same-sex IPV remains largely invisible, and suggests that these dominant discourses play a major role in maintaining this invisibility. In many respects, it builds on work by a number of scholars who have begun to interrogate the criminal justice and social discourses surrounding violent crime, primarily sexual violence, and who problematize these discourses (see for example Carmody 2003; Carmody and Carrington 2000; Marcus 1992). It will begin by outlining these dominant discourses, and then problematize these by identifying some of the important differences between LGBTI IPV and IPV in heterosexual relationships. In doing so, this chapter will suggest some possible reasons for the silence regarding IPV in LGBTI relationships, and the effects that this can have on victims. Although an equally important area of research, and another point at which the limitations of dominant social discourses surrounding IPV can be brought to light, this chapter will not examine violence experienced by heterosexual men at the hands of their intimate female partners. Instead, it will restrict itself to IPV perpetrated within same-sex relationships.

Determining a set of surrogate parameters to evaluate urban stormwater quality

This thesis details methodology to estimate urban stormwater quality based on a set of easy to measure physico-chemical parameters. These parameters can be used as surrogate parameters to estimate other key water quality parameters. The key pollutants considered in this study are nitrogen compounds, phosphorus compounds and solids. The use of surrogate parameter relationships to evaluate urban stormwater quality will reduce the cost of monitoring and so that scientists will have added capability to generate a large amount of data for more rigorous analysis of key urban stormwater quality processes, namely, pollutant build-up and wash-off. This in turn will assist in the development of more stringent stormwater quality mitigation strategies. The research methodology was based on a series of field investigations, laboratory testing and data analysis. Field investigations were conducted to collect pollutant build-up and wash-off samples from residential roads and roof surfaces. Past research has identified that these impervious surfaces are the primary pollutant sources to urban stormwater runoff. A specially designed vacuum system and rainfall simulator were used in the collection of pollutant build-up and wash-off samples. The collected samples were tested for a range of physico-chemical parameters. Data analysis was conducted using both univariate and multivariate data analysis techniques. Analysis of build-up samples showed that pollutant loads accumulated on road surfaces are higher compared to the pollutant loads on roof surfaces. Furthermore, it was found that the fraction of solids smaller than 150 ìm is the most polluted particle size fraction in solids build-up on both roads and roof surfaces. The analysis of wash-off data confirmed that the simulated wash-off process adopted for this research agrees well with the general understanding of the wash-off process on urban impervious surfaces. The observed pollutant concentrations in wash-off from road surfaces were different to pollutant concentrations in wash-off from roof surfaces. Therefore, firstly, the identification of surrogate parameters was undertaken separately for roads and roof surfaces. Secondly, a common set of surrogate parameter relationships were identified for both surfaces together to evaluate urban stormwater quality. Surrogate parameters were identified for nitrogen, phosphorus and solids separately. Electrical conductivity (EC), total organic carbon (TOC), dissolved organic carbon (DOC), total suspended solids (TSS), total dissolved solids (TDS), total solids (TS) and turbidity (TTU) were selected as the relatively easy to measure parameters. Consequently, surrogate parameters for nitrogen and phosphorus were identified from the set of easy to measure parameters for both road surfaces and roof surfaces. Additionally, surrogate parameters for TSS, TDS and TS which are key indicators of solids were obtained from EC and TTU which can be direct field measurements. The regression relationships which were developed for surrogate parameters and key parameter of interest were of a similar format for road and roof surfaces, namely it was in the form of simple linear regression equations. The identified relationships for road surfaces were DTN-TDS:DOC, TP-TS:TOC, TSS-TTU, TDS-EC and TSTTU: EC. The identified relationships for roof surfaces were DTN-TDS and TSTTU: EC. Some of the relationships developed had a higher confidence interval whilst others had a relatively low confidence interval. The relationships obtained for DTN-TDS, DTN-DOC, TP-TS and TS-EC for road surfaces demonstrated good near site portability potential. Currently, best management practices are focussed on providing treatment measures for stormwater runoff at catchment outlets where separation of road and roof runoff is not found. In this context, it is important to find a common set of surrogate parameter relationships for road surfaces and roof surfaces to evaluate urban stormwater quality. Consequently DTN-TDS, TS-EC and TS-TTU relationships were identified as the common relationships which are capable of providing measurements of DTN and TS irrespective of the surface type.

Online estimation of distorted power system signal parameters

An algorithm based on the concept of Kalman filtering is proposed in this paper for the estimation of power system signal attributes, like amplitude, frequency and phase angle. This technique can be used in protection relays, digital AVRs, DSTATCOMs, FACTS and other power electronics applications. Furthermore this algorithm is particularly suitable for the integration of distributed generation sources to power grids when fast and accurate detection of small variations of signal attributes are needed. Practical considerations such as the effect of noise, higher order harmonics, and computational issues of the algorithm are considered and tested in the paper. Several computer simulations are presented to highlight the usefulness of the proposed approach. Simulation results show that the proposed technique can simultaneously estimate the signal attributes, even if it is highly distorted due to the presence of non-linear loads and noise.

Computed tomography analysis of sagittal plane parameters in adolescent idiopathic scoliosis treated by video assisted thoracoscopic spinal fusion and instrumentation

One of the primary treatment goals of adolescent idiopathic scoliosis (AIS) surgery is to achieve maximum coronal plane correction while maintaining coronal balance. However maintaining or restoring sagittal plane spinal curvature has become increasingly important in maintaining the long-term health of the spine. Patients with AIS are characterised by pre-operative thoracic hypokyphosis, and it is generally agreed that operative treatment of thoracic idiopathic scoliosis should aim to restore thoracic kyphosis to normal values while maintaining lumbar lordosis and good overall sagittal balance. The aim of this study was to evaluate CT sagittal plane parameters, with particular emphasis on thoracolumbar junctional alignment, in patients with AIS who underwent Video Assisted Thoracoscopic Spinal Fusion and Instrumentation (VATS). This study concluded that video-assisted thoracoscopic spinal fusion and instrumentation reliably increases thoracic kyphosis while preserving junctional alignment and lumbar lordosis in thoracic AIS.