Energy Efficiency: Trends and Perspectives in the Southern Mediterranean. MEDPRO Technical Report No. 21/December 2012

This paper has two objectives. First, it attempts to establish the potential of policies on energy efficiency and energy demand-side management in the southern Mediterranean region. Second, by examining past trends in energy intensity and trends up to 2030, it analyses the prospects and costs of such policies, compared with expected developments in the price of energy resources. Based on both analyses (MEDPRO WP4) and on prospects for growth (MEDPRO WP8), it seems that energy intensity in the Mediterranean should fall perceptibly by approximately 13% in the next 20 years. But given the programmed energy mix, this will not limit emissions of CO2, which are likely to increase by more than 90%. The paper first presents the rationale for demand-side management (DSM) policies. After a general discussion of concepts, it tackles the question of instruments and measures for implementing such policies, before posing the question of the cost-efficiency approach for monitoring the measures the authorities introduce. Secondly, the paper assesses energy consumption and energy efficiency in the countries of the southern Mediterranean and the ways in which their main economic sectors have changed in recent decades. The third section outlines the demand management measures introduced and, taking Tunisia and Egypt as examples, estimates the cost of such policies. The fourth and last section offers a forecast analysis of energy consumption in the Mediterranean up to 2030, highlighting probable trends in terms of final consumption, energy intensity, energy mix and emissions of CO2. The section concludes with estimates in terms of cost, comparing objectives for lower intensity, results in terms of resource savings and the types of costs this approach represents.

Le role des politiques monétaires et la convergence macroeconomique sur le développement des systèmes financiers dans les pays du sud de la Méditerranée. = The role of monetary policies and macroeconomic convergence in the development of financial systems in south Mediterranean countries. MEDPRO Technical Report No. 12/April 2012

This MEDPRO Technical Report shows that the monetary and exchange rate policies conducted by central banks in the South Mediterranean region display apparent homogeneity in their operational frameworks, albeit with some specificities and differing degrees of advancement. While central banks state that price stability is their ultimate objective, failures to control interest rates as operational objectives of monetary policy result in monetary authorities resorting to quantitative approaches to monetary policy, meaning that monetary aggregates and credit targets are being used as intermediate targets of monetary policy. An econometric exercise limited to Maghreb countries (Algeria, Morocco, and Tunisia) has been conducted to analyse the potential scenarios of convergence and monetary policy coordination. Given the high structural heterogeneity and the slow pace of real convergence due to weak commercial integration in the Maghreb, results nevertheless show alternative dynamics in the integration of effective nominal exchange rates, as well as a complete convergence dynamic in exchange rate policies. Partial convergence of monetary policies regarding the stabilisation of inflation rates remains an open option for a transitional phase where financial integration is low.

Energy in the Eastern Mediterranean: promise or peril? Egmont Paper No. 65, May 2014

From the Introduction. In order to address the different challenges and opportunities on energy cooperation in the Eastern Mediterranean Region and Levant Basin, EGMONT – The Royal Institute for International Relations of Belgium – together with the Atlantic Council, and supported by H. E. Belgian Minister for Foreign Affairs Didier Reynders, opened an expert dialogue in 2013 in order to look at how the management of the new energy resources could act as a vector of cooperation instead of conflict between the concerned countries. The activities have targeted finding new possibilities for cooperation on political and security challenges, energy infrastructure development, the regulatory and legal framework, environmental concerns, and bilateral and regional structures, in a manner that enhances stability and security in the region, increases European energy security, contributes to rather than hinders a comprehensive Cyprus settlement, and promotes wider regional cooperation.

Age determination and paleotemperatures of western Mediterranean Sea sediments

Sea surface temperature (SST) profiles over the last 25 kyr derived from alkenone measurements are studied in four cores from a W-E latitudinal transect encompassing the Gulf of Cadiz (Atlantic Ocean), the Alboran Sea, and the southern Tyrrhenian Sea (western Mediterranean). The results document the sensitivity of the Mediterranean region to the short climatic changes of the North Atlantic Ocean, particularly those involving the latitudinal position of the polar front. The amplitude of the SST oscillations increases toward the Tyrrhenian Sea, indicating an amplification effect of the Atlantic signal by the climatic regime of the Mediterranean region. All studied cores show a shorter cooling phase (700 years) for the Younger Dryas (YD) than that observed in the North Atlantic region (1200 years). This time diachroneity is related to an intra-YD climatic change documented in the European continent. Minor oscillations in the southward displacement of the North Atlantic polar front may also have driven this early warming in the studied area. During the Holocene a regional diachroneity propagating west to east is observed for the SST maxima, 11.5-10.2 kyr B.P. in the Gulf of Cadiz, 10-9 kyr B.P. in the Alboran Sea, and 8.9-8.4 kyr B.P. in the Thyrrenian Sea. A general cooling trend from these SST maxima to present day is observed during this stage, which is marked by short cooling oscillations with a periodicity of 730±40 years and its harmonics.

Influence of the sea state on Mediterranean heavy precipitation: a case-study from HyMeX SOP1

Sea state can influence the turbulent air–sea exchanges, especially the momentum flux, by modifying the sea-surface roughness. The high-resolution non-hydrostatic convection-permitting model MESO-NH is used here to investigate the impact of a more realistic representation of the waves on heavy precipitation during the Intense Observation Period (IOP) 16a of the first HyMeX Special Observation Period (SOP1). Several quasi-stationary mesoscale convective systems developed over the western Mediterranean region, two of them over the sea, and resulted in heavy precipitation on the French and Italian coasts on 26 October 2012. Three different bulk parametrizations are tested in this study: a reference case (NOWAV) without any wave effect, a parametrization taking into account theoretical wave effects (WAV) and a last one with realistic wave characteristics from the MFWAM analyses (WAM). Using a realistic wave representation in WAM significantly increases the roughness length and the friction velocity with respect to NOWAV and WAV. The three MESO-NH sensitivity experiments of the IOP16a show that this surface-roughness increase in WAM generates higher momentum fluxes and directly impacts the low-level dynamics of the atmosphere, with a slowdown of the 10 m wind, when and where the wind speed exceeds 10 m s−1 and the sea state differs from the idealized one. The turbulent heat fluxes are not significantly influenced by the waves, these fluxes being controlled by the moisture content rather than by the wind speed in the simulations. Although the convective activity is globally well reproduced by all the simulations, the difference in the low-level dynamics of the atmosphere influences the localization of the simulated heavy precipitation. Objective evaluation of the daily rainfall amount and of the 10 m wind speed against the observations confirms the positive impact of the realistic wave representation on this simulation of heavy precipitation.

Between the Atlantic and the Mediterranean : the late bronze age around the Tagus estuary (Portugal) : economic, social and cultural aspects

This paper deals with the importance, quantity and diversity of Late Bronze Age sites known around the Tagus estuary. The material culture points out to the existence of cultural stimuli from very different origins: from the Iberian Peninsula inner, the North Atlantic and the Mediterranean basin, related to the social organization and the economy of the populations that inhabited this region between the XIII century BC and the IX century BC, according to the available radiocarbon data. These populations interacted with the first Phoenicians that arrived to the region at the end of this period, after episodic relations of trading with their antecedents, from Central Mediterranean region.

Seasonal concentration of cruise tourism in the Mediterranean

This research delves into analyzing the seasonality of cruise tourism in the Mediterranean by using the decomposition of the Gini index, used in the field of cruise tourism for the first time in literature. This study specifically used the decomposition to evaluate the contribution degree of each port to the global seasonal concentration of each Mediterranean region. Moreover, a cluster analysis technique (bootstrapped bagged clustering) was applied to classify the ports into homogeneous groups according to their seasonal patterns given the significant heterogeneity revealed in the major regions of the Mediterranean. The methodology applied can serve as a control and monitoring tool for measuring seasonal concentration levels in cruise tourism, allowing for policies against seasonality to be tailored in the cruise tourism segment.

Evaluation of DUALEM, OptRx and Grassmaster II sensors for monitoring the spatial variability and the temporal stability of a Mediterranean pasture

Site-specific management (SSM) is a form of precision agriculture whereby decisions on resource application and agronomic practices are improved to better match soil and crop requirements as they vary in the field. SSM enables the identification of regions (homogeneous management zones) within the area delimited by field boundaries. These subfield regions constitute areas that have similar permanent characteristics. Traditional soil and pasture sampling and the necessary laboratory analysis are time-consuming, labour-intensive and cost prohibitive, not viable from a SSM perspective because it needs a large number of soil and pasture samples in order to achieve a good representation of soil properties, nutrient levels and pasture quality and productivity. The main objective of this work was to evaluate technologies which have potential for monitoring aspects related to spatial and temporal variability of soil nutrients and pasture green and dry matter yield (respectively, GM and DM, in kg/ha) and support to decision making for the farmer. Three types of sensors were evaluated in a 7ha pasture experimental field: an electromagnetic induction sensor (“DUALEM 1S”, which measures the soil apparent electrical conductivity, ECa), an active optical sensor ("OptRx®", which measures the NDVI, “Normalized Difference Vegetation Index”) and a capacitance probe ("GrassMaster II" which estimates plant mass). The results indicate the possibility of using a soil electrical conductivity probe as, probably, the best tool for monitoring not only some of the characteristics of the soil, but also those of the pasture, which could represent an important help in simplifying the process of sampling and support SSM decision making, in precision agriculture projects. On the other hand, the significant and very strong correlations obtained between capacitance and NDVI and between any of these parameters and the pasture productivity shows the potential of these tools for monitoring the evolution of spatial and temporal patterns of the vegetative growth of biodiverse pasture, for identifying different plant species and variability in pasture yield in Alentejo dry-land farming systems. These results are relevant for the selection of an adequate sensing system for a particular application and open new perspectives for other works that would allow the testing, calibration and validation of the sensors in a wider range of pasture production conditions, namely the extraordinary diversity of botanical species that are characteristic of the Mediterranean region at the different periods of the year.

Plant/Leaf traits and adaptive strategies of Cistus species to Mediterranean drought and insolation in southern Portugal

The effects of climate change can result in dramatic consequences in specific ecosystems such as montados that are seriously threatened by the absence of cork and holm oak (Quercus suber and Q. rotundifolia) natural regeneration. Shrubs of the genus Cistus, which are among the most important elements of encroached montados, seem to promote soil rehabilitation and enhance oak regeneration (Simões et al. 2009). In this context, we compared the life strategies and evaluated the potential ability of Cistus species to adapt to the increasing drought expected for the Mediterranean region, and thus their role on the sustainability of cork oak montados.

Identification of resistance factors to the main wheat diseases in the Mediterranean area

Several diseases challenge bread and durum wheat productions worldwide. The importance of these cereals requires adequate protection to pathogens that can cause strong yield and grain quality losses. The main work of this thesis was related to phenotype GDP (Global Durum Panel) in the Mediterranean region (Italy, Egypt, Lebanon, Morocco and Turkey) and Argentina across three years (2019-2021) for yellow rust resistance (infection type and severity). GWAS shows in particular, loci in chromosome 1B, 2B, 4B, 5A, 6A, 7B showed high significance across nurseries/years, with various patterns of GxE. The second chapter is about Zymoseptoria tritici, agent of STB (Septoria Tritici Blotch), a foliar pathogen that yearly causes high damages if not controlled. In recent years research in durum wheat breeding is focused on the identification of novel, underexploited resistance genes to be subsequently and conveniently moved into the pre-breeding and breeding stream. The plants were phenotyped for disease height characters, infection type at the flag leaf and infection type at the level of the canopy below the flag leaf. This experiment opens up a rich scenario of analysis and opportunities to investigate and discover new loci of resistance to STB. Third chapter is about Fusarium head blight (FHB) is a fungal disease caused by pathogens belonging to the genus Fusarium. In particular, Fusarium culmorum and Fusarium graminearum species cause severe grain yield losses and accumulation of mycotoxins in wheat that compromise food safety. Over 250 QTL/genes for FHB resistance have been identified in bread wheat, such as Fhb 1 and Fhb 5 but only a small number of FHB resistance loci have been mapped in durum wheat. The aim of this work is to find loci of partial resistance to FHB already present in durum and bread wheat germplasm and therefore easily cumulative.

Modelling the potential distribution of the invasive tomato red spider mite, Tetranychus evansi (Acari: Tetranychidae)

Predicting the potential geographical distribution of a species is particularly important for pests with strong invasive abilities. Tetranychus evansi Baker & Pritchard, possibly native to South America, is a spider mite pest of solanaceous crops. This mite is considered an invasive species in Africa and Europe. A CLIMEX model was developed to predict its global distribution. The model results fitted the known records of T. evansi except for some records in dry locations. Dryness as well as excess moisture stresses play important roles in limiting the spread of the mite in the tropics. In North America and Eurasia its potential distribution appears to be essentially limited by cold stress. Detailed potential distribution maps are provided for T. evansi in the Mediterranean Basin and in Japan. These two regions correspond to climatic borders for the species. Mite establishment in these areas can be explained by their relatively mild winters. The Mediterranean region is also the main area where tomato is grown in open fields in Europe and where the pest represents a threat. According to the model, the whole Mediterranean region has the potential to be extensively colonized by the mite. Wide expansion of the mite to new areas in Africa is also predicted. Agricultural issues highlighted by the modelled distribution of the pest are discussed.

Application of biotechnology in breeding lentil for resistance to biotic and abiotic stress

Lentil is a self-pollinating diploid (2n = 14 chromosomes) annual cool season legume crop that is produced throughout the world and is highly valued as a high protein food. Several abiotic stresses are important to lentil yields world wide and include drought, heat, salt susceptibility and iron deficiency. The biotic stresses are numerous and include: susceptibility to Ascochyta blight, caused by Ascochyta lentis; Anthracnose, caused by Colletotrichum truncatum; Fusarium wilt, caused by Fusarium oxysporum; Sclerotinia white mold, caused by Sclerotinia sclerotiorum; rust, caused by Uromyces fabae; and numerous aphid transmitted viruses. Lentil is also highly susceptible to several species of Orabanche prevalent in the Mediterranean region, for which there does not appear to be much resistance in the germplasm. Plant breeders and geneticists have addressed these stresses by identifying resistant/tolerant germplasm, determining the genetics involved and the genetic map positions of the resistant genes. To this end progress has been made in mapping the lentil genome and several genetic maps are available that eventually will lead to the development of a consensus map for lentil. Marker density has been limited in the published genetic maps and there is a distinct lack of co-dominant markers that would facilitate comparisons of the available genetic maps and efficient identification of markers closely linked to genes of interest. Molecular breeding of lentil for disease resistance genes using marker assisted selection, particularly for resistance to Ascochyta blight and Anthracnose, is underway in Australia and Canada and promising results have been obtained. Comparative genomics and synteny analyses with closely related legumes promises to further advance the knowledge of the lentil genome and provide lentil breeders with additional genes and selectable markers for use in marker assisted selection. Genomic tools such as macro and micro arrays, reverse genetics and genetic transformation are emerging technologies that may eventually be available for use in lentil crop improvement.

New mitochondrial and nuclear evidences support recent demographic expansion and an atypical phylogeographic pattern in the Spittlebug Philaenus spumarius (Hemiptera, Aphrophoridae)

Copyright: © 2014 Rodrigues et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Vertébrés (crocodilians, poisons) du Miocène marin de l’Algarve occidentale

Karst fillings rich in fossils from carbonate series, Miocene in age, exposed on the coast of Algarve, yielded some thousands of teeth and other vertebrate remains. A crocodilian and more than fifty species of fishes (Selacians, Teleosteans) have been identified (see tableau 1). This fauna is consistent as a whole with a Burdigalian (maybe late) and/or Langhian age. It also indicates shallow waters, warmer than at present in the same region although not strictly tropical. This fauna shows more affinities with others of the same age from mediterranean region (i.e. Baleares) than with those from Lisbon.

Recent droughts and the impact of North Atlantic Oscillation in Iberia; a spatiotemporal analysis based on vegetation temperature condition Index (VTCI)

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.