Genetic and environmental contributions to educational attainment in Australia

The genetic and environmental contributions to educational attainment in Australia are examined using a multiple regression model drawn from the medical research literature. Data from a large sample of Australian twins are analysed. The findings indicate that at least as much as 50 percent and perhaps as much as 65 percent of the variance in educational attainments can be attributed to genetic endowments. It is suggested that only around 25 percent of the variance in educational attainments may be due to environmental factors, though this contribution is shown to be around 40 percent when adjustments for measurement error and assortative mating are made. The high fraction of the observed variation in educational attainments due to genetic differences is consistent with results reported by Heath et al. (Heath, A.C., Berg, K., Eaves, L.J., Solaas, M.H., Corey, L.A., Sundet, J., Magnus, P., Nance, W.E., 1985. Education policy and the heritability of educational attainment. Nature 314(6013), 734-736.), Tambs et al. (Tambs, K., Sundet, J.M., Magnus, P., Berg, K., 1989. Genetic and environmental contributions to the covariance between occupational status, educational attainment and IQ: a study of twins. Behavior Genetics 19(2), 209-222.), Vogler and Fulker (Vogler, G.P., Fulker, D.W., 1983. Familial resemblance for educational attainment. Behavior Generics 13(4), 341-354.) and Behrman and Taubman (Behrman, J., Taubman, P., 1989. Is schooling mostly in the genes? Nature-nurture decomposition using data on relatives. Journal of Political Economy 97(6), 1425-1446.), suggesting that the finding is robust. (C) 2001 Elsevier Science Ltd. All rights reserved.

Genetic influence on ERP slow wave measures of working memory

Individual differences in the variance of event-related potential (ERP) slow wave (SW) measures were examined. SW was recorded at prefrontal and parietal sites during memory and sensory trials of a delayed-response task in 391 adolescent twin pairs. Familial resemblance was identified and there was a strong suggestion of genetic influence. A common genetic factor influencing memory and sensory SW was identified at the prefrontal site (accounting for an estimated 35%-37% of the reliable variance) and at the parietal site (51%-52% of the reliable variance). Remaining reliable variance was influenced by unique environmental factors. Measurement error accounted for 24% to 30% of the total variance of each variable. The results show genetic independence for recording site, but not trial type, and suggest that the genetic factors identified relate more directly to brain structures, as defined by the cognitive functions they support, than to the cognitive networks that link them.

An experimental study to compare the interface pressure and experience of healthy participants when lying still for 20 minutes in a supine position on two different imaging surfaces

Introduction: Pressure ulcers are a high cost, high volume issue for health and medical care providers, affecting patients’ recovery and psychological wellbeing. The current research of support surfaces on pressure as a risk factor in the development of pressure ulcers is not relevant to the specialised, controlled environment of the radiological setting. Method: 38 healthy participants aged 19-51 were placed supine on two different imaging surfaces. The XSENSOR pressure mapping system was used to measure the interface pressure. Data was acquired over a time of 20 minutes preceded by 6 minutes settling time to reduce measurement error. Qualitative information regarding participants’ opinion on pain and comfort was recorded using a questionnaire. Data analysis was performed using SPSS 22. Results: Data was collected from 30 participants aged 19 to 51 (mean 25.77, SD 7.72), BMI from 18.7 to 33.6 (mean 24.12, SD 3.29), for two surfaces, following eight participant exclusions due to technical faults. Total average pressure, average pressure for jeopardy areas (head, sacrum & heels) and peak pressure for jeopardy areas were calculated as interface pressure in mmHg. Qualitative data showed that a significant difference in experiences of comfort and pain was found in the jeopardy areas (P<0.05) between the two surfaces. Conclusion: A significant difference is seen in average pressure between the two surfaces. Pain and comfort data also show a significant difference between the surfaces, both findings support the proposal for further investigation into the effects of radiological surfaces as a risk factor for the formation of pressure ulcers.

Aquisição e registo automático de compradores de massa digitais em calibração de pesos

A presente dissertação foi desenvolvida nas instalações do laboratório de massa da extinta Direção Regional da Economia do Norte (DRE-Norte), no âmbito da unidade curricular de Dissertação/Projeto/Estágio Profissional (DPEPR) do curso de Mestrado de Instrumentação e Metrologia (MEIM) do Instituto Superior de Engenharia do Porto (ISEP). O laboratório de massa da DRE-Norte dedicava-se, entre outras atividades, à calibração de pesos das classes de exatidão F1 e inferior, definidas na recomendação R111-1:2004 da Organização Internacional de Metrologia Legal (OIML), para valores nominais desde 1 mg até 1 000 kg. Foi implementado um sistema real de calibração de pesos utilizando dois comparadores de massa, com interface de comunicação de dados, com fios e sem fios, para o PC (Personal Computer), com aquisição automática dos dados. Desenvolveu-se uma aplicação informática em Visual Basic com o objetivo de ligar os dois comparadores de massa ao PC e automatizar o processo de calibração de pesos com base no método ABBA. O software desenvolvido foi aplicado num caso real de calibração de pesos em ambiente de intercomparação laboratorial com a participação de sete laboratórios nacionais, entre os quais, o laboratório de massa da DRE-Norte.

Human capital in growth regressions: how much difference does data quality make? An update and further results

We construct estimates of educational attainment for a sample of OECD countries using previously unexploited sources. We follow a heuristic approach to obtain plausible time profiles for attainment levels by removing sharp breaks in the data that seem to reflect changes in classification criteria. We then construct indicators of the information content of our series and a number of previously available data sets and examine their performance in several growth specifications. We find a clear positive correlation between data quality and the size and significance of human capital coefficients in growth regressions. Using an extension of the classical errors in variables model, we construct a set of meta-estimates of the coefficient of years of schooling in an aggregate Cobb-Douglas production function. Our results suggest that, after correcting for measurement error bias, the value of this parameter is well above 0.50.

Assessing the Relationship between the Baseline Value of a Continuous Variable and Subsequent Change over Time

Analyzing the relationship between the baseline value and subsequent change of a continuous variable is a frequent matter of inquiry in cohort studies. These analyses are surprisingly complex, particularly if only two waves of data are available. It is unclear for non-biostatisticians where the complexity of this analysis lies and which statistical method is adequate.With the help of simulated longitudinal data of body mass index in children,we review statistical methods for the analysis of the association between the baseline value and subsequent change, assuming linear growth with time. Key issues in such analyses are mathematical coupling, measurement error, variability of change between individuals, and regression to the mean. Ideally, it is better to rely on multiple repeated measurements at different times and a linear random effects model is a standard approach if more than two waves of data are available. If only two waves of data are available, our simulations show that Blomqvist's method - which consists in adjusting for measurement error variance the estimated regression coefficient of observed change on baseline value - provides accurate estimates. The adequacy of the methods to assess the relationship between the baseline value and subsequent change depends on the number of data waves, the availability of information on measurement error, and the variability of change between individuals.

Use of accuracy profile for the validation of a gas chromatography-negative chemical ionization tandem mass spectrometry method: quantification of ethyl glucuronide in hair

Introduction: Ethylglucuronide (EtG) is a direct and specific metabolite of ethanol. Its determination in hair is of increasing interest for detecting and monitoring alcohol abuse. The quantification of EtG in hair requires analytical methods showing highest sensitivity and specificity. We present a fully validated method based on gas chromatography-negative chemical ionization tandem mass spectrometry (GC-NCI-MS/MS). The method was validated using French Society of Pharmaceutical Sciences and Techniques (SFSTP) guidelines which are based on the determination of the total measurement error and accuracy profiles. Methods: Washed and powdered hair is extracted in water using an ultrasonic incubation. After purification by Oasis MAX solid phase extraction, the derivatized EtG is detected and quantified by GC-NCI-MS/MS method in the selected reaction monitoring mode. The transitions m/z 347 / 163 and m/z 347 / 119 were used for the quantification and identification of EtG. Four quality controls (QC) prepared with hair samples taken post mortem from 2 subjects with a known history of alcoholism were used. A proficiency test with 7 participating laboratories was first run to validate the EtG concentration of each QC sample. Considering the results of this test, these samples were then used as internal controls for validation of the method. Results: The mean EtG concentrations measured in the 4 QC were 259.4, 130.4, 40.8, and 8.4 pg/mg hair. Method validation has shown linearity between 8.4 and 259.4 pg/mg hair (r2 > 0.999). The lower limit of quantification was set up at 8.4 pg/mg. Repeatability and intermediate precision were found less than 13.2% for all concentrations tested. Conclusion: The method proved to be suitable for routine analysis of EtG in hair. GC-NCI-MS/MS method was then successfully applied to the analysis of EtG in hair samples collected from different alcohol consumers.

Meat consumption and mortality - results from the European Prospective Investigation into Cancer and Nutrition.

BACKGROUND Recently, some US cohorts have shown a moderate association between red and processed meat consumption and mortality supporting the results of previous studies among vegetarians. The aim of this study was to examine the association of red meat, processed meat, and poultry consumption with the risk of early death in the European Prospective Investigation into Cancer and Nutrition (EPIC). METHODS Included in the analysis were 448,568 men and women without prevalent cancer, stroke, or myocardial infarction, and with complete information on diet, smoking, physical activity and body mass index, who were between 35 and 69 years old at baseline. Cox proportional hazards regression was used to examine the association of meat consumption with all-cause and cause-specific mortality. RESULTS As of June 2009, 26,344 deaths were observed. After multivariate adjustment, a high consumption of red meat was related to higher all-cause mortality (hazard ratio (HR) = 1.14, 95% confidence interval (CI) 1.01 to 1.28, 160+ versus 10 to 19.9 g/day), and the association was stronger for processed meat (HR = 1.44, 95% CI 1.24 to 1.66, 160+ versus 10 to 19.9 g/day). After correction for measurement error, higher all-cause mortality remained significant only for processed meat (HR = 1.18, 95% CI 1.11 to 1.25, per 50 g/d). We estimated that 3.3% (95% CI 1.5% to 5.0%) of deaths could be prevented if all participants had a processed meat consumption of less than 20 g/day. Significant associations with processed meat intake were observed for cardiovascular diseases, cancer, and 'other causes of death'. The consumption of poultry was not related to all-cause mortality. CONCLUSIONS The results of our analysis support a moderate positive association between processed meat consumption and mortality, in particular due to cardiovascular diseases, but also to cancer.

Measuring and Explaining the Increase of Travel Distance : A Multilevel Analysis Using Repeated Cross Sectional Travel Surveys

We want to shed some light on the development of person mobility by analysing the repeated cross-sectional data of the four National Travel Surveys (NTS) that were conducted in Germany since the mid seventies. The above mentioned driving forces operate on different levels of the system that generates the spatial behaviour we observe: Travel demand is derived from the needs and desires of individuals to participate in spatially separated activities. Individuals organise their lives in an interactive process within the context they live in, using given infrastructure. Essential determinants of their demand are the individual's socio-demographic characteristics, but also the opportunities and constraints defined by the household and the environment are relevant for the behaviour which ultimately can be realised. In order to fully capture the context which determines individual behaviour, the (nested) hierarchy of persons within households within spatial settings has to be considered. The data we will use for our analysis contains information on these three levels. With the analysis of this micro-data we attempt to improve our understanding of the afore subsumed macro developments. In addition we will investigate the prediction power of a few classic sociodemographic variables for the daily travel distance of individuals in the four NTS data sets, with a focus on the evolution of this predictive power. The additional task to correctly measure distances travelled by means of the NTS is threatened by the fact that although these surveys measure the same variables, different sampling designs and data collection procedures were used. So the aim of the analysis is also to detect variables whose control corrects for the known measurement error, as a prerequisite to apply appropriate models in order to better understand the development of individual travel behaviour in a multilevel context. This task is complicated by the fact that variables that inform on survey procedures and outcomes are only provided with the data set for 2002 (see Infas and DIW Berlin, 2003).

Effects of long-term averaging of quantitative blood pressure traits on the detection of genetic associations.

Blood pressure (BP) is a heritable, quantitative trait with intraindividual variability and susceptibility to measurement error. Genetic studies of BP generally use single-visit measurements and thus cannot remove variability occurring over months or years. We leveraged the idea that averaging BP measured across time would improve phenotypic accuracy and thereby increase statistical power to detect genetic associations. We studied systolic BP (SBP), diastolic BP (DBP), mean arterial pressure (MAP), and pulse pressure (PP) averaged over multiple years in 46,629 individuals of European ancestry. We identified 39 trait-variant associations across 19 independent loci (p < 5 × 10(-8)); five associations (in four loci) uniquely identified by our LTA analyses included those of SBP and MAP at 2p23 (rs1275988, near KCNK3), DBP at 2q11.2 (rs7599598, in FER1L5), and PP at 6p21 (rs10948071, near CRIP3) and 7p13 (rs2949837, near IGFBP3). Replication analyses conducted in cohorts with single-visit BP data showed positive replication of associations and a nominal association (p < 0.05). We estimated a 20% gain in statistical power with long-term average (LTA) as compared to single-visit BP association studies. Using LTA analysis, we identified genetic loci influencing BP. LTA might be one way of increasing the power of genetic associations for continuous traits in extant samples for other phenotypes that are measured serially over time.

Evalution of Hot Mix Asphalt Moisture Sensitivity Using the Nottingham Asphalt Test Equipment, July 2005

Moisture sensitivity of Hot Mix Asphalt (HMA) mixtures, generally called stripping, is a major form of distress in asphalt concrete pavement. It is characterized by the loss of adhesive bond between the asphalt binder and the aggregate (a failure of the bonding of the binder to the aggregate) or by a softening of the cohesive bonds within the asphalt binder (a failure within the binder itself), both of which are due to the action of loading under traffic in the presence of moisture. The evaluation of HMA moisture sensitivity has been divided into two categories: visual inspection test and mechanical test. However, most of them have been developed in pre-Superpave mix design. This research was undertaken to develop a protocol for evaluating the moisture sensitivity potential of HMA mixtures using the Nottingham Asphalt Tester (NAT). The mechanisms of HMA moisture sensitivity were reviewed and the test protocols using the NAT were developed. Different types of blends as moisture-sensitive groups and non-moisture-sensitive groups were used to evaluate the potential of the proposed test. The test results were analyzed with three parameters based on performance character: the retained flow number depending on critical permanent deformation failure (RFNP), the retained flow number depending on cohesion failure (RFNC), and energy ratio (ER). Analysis based on energy ratio of elastic strain (EREE ) at flow number of cohesion failure (FNC) has higher potential to evaluate the HMA moisture sensitivity than other parameters. If the measurement error in data-acquisition process is removed, analyses based on RFNP and RFNC would also have high potential to evaluate the HMA moisture sensitivity. The vacuum pressure saturation used in AASHTO T 283 and proposed test has a risk to damage specimen before the load applying.

Life-Cycle Effects on Household Expenditures: A Latent-Variable Approach

Using data from the Spanish household budget survey, we investigate life- cycle effects on several product expenditures. A latent-variable model approach is adopted to evaluate the impact of income on expenditures, controlling for the number of members in the family. Two latent factors underlying repeated measures of monetary and non-monetary income are used as explanatory variables in the expenditure regression equations, thus avoiding possible bias associated to the measurement error in income. The proposed methodology also takes care of the case in which product expenditures exhibit a pattern of infrequent purchases. Multiple-group analysis is used to assess the variation of key parameters of the model across various household life-cycle typologies. The analysis discloses significant life-cycle effects on the mean levels of expenditures; it also detects significant life-cycle effects on the way expenditures are affected by income and family size. Asymptotic robust methods are used to account for possible non-normality of the data.

Adjustment to Target Capital, Finance, and Growth

Does financial development result in capital being reallocated more rapidly to industries where it is most productive? We argue that if this was the case, financially developed countries should see faster growth in industries with investment opportunities due to global demand and productivity shifts. Testing this cross-industry cross-country growth implication requires proxies for (latent) global industry investment opportunities. We show that tests relying only on data from specific (benchmark) countries may yield spurious evidence for or against the hypothesis. We therefore develop an alternative approach that combines benchmark-country proxies with a proxy that does not reflect opportunities specific to a country or level of financial development. Our empirical results yield clear support for the capital reallocation hypothesis.

Lyfe-cycle effects on household expenditures: A latent-variable approach

Using data from the Spanish household budget survey, we investigate life-cycle effects on several product expenditures. A latent-variable model approach is adopted to evaluate the impact of income on expenditures, controlling for the number of members in the family. Two latent factors underlying repeated measures of monetary and non-monetary income are used as explanatory variables in the expenditure regression equations, thus avoiding possible bias associated to the measurement error in income. The proposed methodology also takes care of the case in which product expenditures exhibit a pattern of infrequent purchases. Multiple-group analysis is used to assess the variation of key parameters of the model across various household life-cycle typologies. The analysis discloses significant life-cycle effects on the mean levels of expenditures; it also detects significant life-cycle effects on the way expenditures are affected by income and family size. Asymptotic robust methods are used to account for possible non-normality of the data.

Adjustment to target capital, finance and growth

Does financial development result in capital being reallocated more rapidly to industries where it is most productive? We argue that if this was the case, financially developed countries should see faster growth in industries with investment opportunities due to global demand and productivity shifts. Testing this cross-industry cross-country growth implication requires proxies for (latent) global industry investment opportunities. We show that tests relying only on data from specific (benchmark) countries may yield spurious evidence for or against the hypothesis. We therefore develop an alternative approach that combines benchmark-country proxies with a proxy that does not reflect opportunities specific to a country or level of financial development. Our empirical results yield clear support for the capital reallocation hypothesis.