Medical image registration based on random line sampling

One of the key aspects in 3D-image registration is the computation of the joint intensity histogram. We propose a new approach to compute this histogram using uniformly distributed random lines to sample stochastically the overlapping volume between two 3D-images. The intensity values are captured from the lines at evenly spaced positions, taking an initial random offset different for each line. This method provides us with an accurate, robust and fast mutual information-based registration. The interpolation effects are drastically reduced, due to the stochastic nature of the line generation, and the alignment process is also accelerated. The results obtained show a better performance of the introduced method than the classic computation of the joint histogram

Surface-sampling and analysis of TATP by swabbing and gas chromatography/mass spectrometry

The method of sample recovery for trace detection and identification of explosives plays a critical role in several criminal investigations. After bombing, there can be difficulties in sending big objects to a laboratory for analysis. Traces can also be searched for on large surfaces, on hands of suspects or on surfaces where the explosive was placed during preparatory phases (e.g. places where an IED was assembled, vehicles used for transportation, etc.). In this work, triacetone triperoxide (TATP) was synthesized from commercial precursors following reported methods. Several portions of about 6 mg of TATP were then spread on different surfaces (e.g. floors, tables, etc.) or used in handling tests. Three different swabbing systems were used: a commercial swab, pre-wetted with propan-2-ol (isopropanol) and water (7:3), dry paper swabs, and cotton swabs wetted with propan-2-ol. Paper and commercial swabs were also used to sample a metal plate, where a small charge of about 4 g of TATP was detonated. Swabs were sealed in small glass jars with screw caps and Parafilm® M and sent to the laboratory for analysis. Swabs were extracted and analysed several weeks later by gas chromatography/mass spectrometry. All the three systems gave positive results, but wetted swabs collected higher amounts of TATP. The developed procedure showed its suitability for use in real cases, allowing TATP detection in several simulations, including a situation in which people wash their hands after handling the explosive.

Host genetic factors in American cutaneous leishmaniasis: a critical appraisal of studies conducted in an endemic area of Brazil

American cutaneous leishmaniasis (ACL) is a vector-transmitted infectious disease with an estimated 1.5 million new cases per year. In Brazil, ACL represents a significant public health problem, with approximately 30,000 new reported cases annually, representing an incidence of 18.5 cases per 100,000 inhabitants. Corte de Pedra is in a region endemic for ACL in the state of Bahia (BA), northeastern Brazil, with 500-1,300 patients treated annually. Over the last decade, population and family-based candidate gene studies were conducted in Corte de Pedra, founded on previous knowledge from studies on mice and humans. Notwithstanding limitations related to sample size and power, these studies contribute important genetic biomarkers that identify novel pathways of disease pathogenesis and possible new therapeutic targets. The present paper is a narrative review about ACL immunogenetics in BA, highlighting in particular the interacting roles of the wound healing gene FLI1 with interleukin-6 and genes SMAD2 and SMAD3 of the transforming growth factor beta signalling pathway. This research highlights the need for well-powered genetic and functional studies on Leishmania braziliensis infection as essential to define and validate the role of host genes in determining resistance/susceptibility regarding this disease.

Critical ruptures in a bundle of slowly relaxing fibers

We study the damage enhanced creep rupture of disordered materials by means of a fiber bundle model. Broken fibers undergo a slow stress relaxation modeled by a Maxwell element whose stress exponent m can vary in a broad range. Under global load sharing we show that due to the strength disorder of fibers, the lifetime ʧ of the bundle has sample-to-sample fluctuations characterized by a log-normal distribution independent of the type of disorder. We determine the Monkman-Grant relation of the model and establish a relation between the rupture life tʄ and the characteristic time tm of the intermediate creep regime of the bundle where the minimum strain rate is reached, making possible reliable estimates of ʧ from short term measurements. Approaching macroscopic failure, the deformation rate has a finite time power law singularity whose exponent is a decreasing function of m. On the microlevel the distribution of waiting times is found to have a power law behavior with m-dependent exponents different below and above the critical load of the bundle. Approaching the critical load from above, the cutoff value of the distributions has a power law divergence whose exponent coincides with the stress exponent of Maxwell elements

The early Miocene rotation of the Corso-Sardinian block. New paleomagnetic constraints for the end of the motion

The paleomagnetic investigations carried out in the 70's on Oligo-Miocene volcanics of Sardinia have demonstrated that the island was turned by 35-30 degrees clockwise from 33 Ma up to 3-1-20.5 Ma and rotated counterclockwise in a few million years [De Jong et al., 1969, 1973; Bobier et Coulon, 1970; Coulon et al., 1974; Manzoni, 1974, 1975; Bellon rr nl.. 1977: Edel et Lortscher, 1977; Edel, 1979, 1980]. Since then, the end of the rotation fixed at 19 Ma by Montigny er al. [1981] was the subject of discussions and several studies associating paleomagnetism and radiometric dating were undertaken [Assorgia er al., 1994: Vigliotti et Langenheim, 1995: Deino et al., 1997; Gattacceca rt Deino, 1999]. This is a contribution to this debate that is hampered by thr important secular variation recorded in the volcanics. The only way to get our of this problem is to sample series of successive flows as completely as possible, and to reduce the effect of secular variation by the calculation of means. Sampling was performed north of Bonorva in 5 pyroclastic flows that belong to the upper ignimbritic series SI2 according to Coulon rr nl. [1974] or LBLS according to Assorgia et al. [1997] (fig. I). Ar-40/Ar-39 dating of biotites from the debris flow (MDF) has yielded an age or 18.35 +/- 0.03 Ma [Dubois, 2000]. Five of the investigated sites are located beneath the debris flow ITV, TVB, TVD, SPM85, SPM86), one site was cured in the matrix of the debris flow (MDF) and one in 4 metric blocks included in the flow (DFC). Another site was sampled in the upper ash flow (PDM) that marks the end of the pyroclastic activity, just before the marine transgression. According to micropaleontological and radiometric dating this transgression has occurred between 18.35 and 17.6 Ma [Dubois, 2000]. After removal of a soft viscous component, the thermal demagnetization generally shows a univectorial behaviour of the remanent magnetization (fig. 2a). The maximum unblocking temperatures of 580-620 degrees (tab. I) and a rapid saturation below 100 mT (fig. 3) indicate that the carrier of the characteristic magnetization is magnetite. The exception comes: from the upper site PDM in which were found two characteristic components, one with a normal polarity and low unblocking temperatures up to 350 degreesC and one with a reversed polarity and maximum unblocking temperatures at 580-600 degreesC of magnetite. After calculation of a mean direction for each flow, the mean << Al >> direction 4 degrees /57 degrees (alpha (95) = 13 degrees) computed with the mean directions for the 5 flows may be considered as weakly affected by secular variation. But the results require a more careful examination. The declinations are N to NNW beneath the debris flow. NNW in the debris flow. and NNE (or SSW) above the debris flow, The elongated distribution of the directions obtained at sites TVB and TVD. scattered from the mean direction of TV to the mean direction of MDF is interpreted as due to partial overprinting during the debris How volcanic episode, The low temperature component PDMa is likely related to the alteration seen on thin sections and is also viewed as an overprint. As NNE/SSW directions occur as well below (mean direction << B >> : 5 degrees /58 degrees) as above the debris flow (PDMb : 200 degrees/-58 degrees). the NNW directions (<< C >> : 337 degrees /64 degrees) associated with the debris flow volcanism may be interpreted as resulting from a magnetic field excursion. According to the polarity scale of Cande and Kent [1992, 1995] and the radiometric age of MDF, the directions with normal polarity (TV, TVB, TVD, SPM85. SPM86a. MDF. DFC) may represent the period 5En. while the directions with reversed polarity PDMb and SPM86b were likely acquired during the period 5Dr. Using the mean << Al >> direction, the mean << B >>, or the PDM direction (tab. I). the deviation in declination with the direction of stable Europe 6.4 degrees /58.7 degrees (alpha (95) = 8 degrees) for a selection of 4 middle Tertiary poles by Besse et Courtillot [1991] or 7 degrees /56 degrees (alpha (95) = 3 degrees) for 19 poles listed by Edel [1980] can be considered as negligible. Using the results from the uppermost ignimbritic layer of Anglona also emplaced around 18.3 Ma [Odin rt al.. 1994]. the mean direction << E >> (3 degrees /51.5 degrees) leads to the same conclusion. On the contrary, when taking into account all dated results available for the period 5En (mean direction << D >> 353 degrees /56 degrees for 45 sites) (tab. II). the deviation 13 degrees is much more significant. As the rotation of Sardinia started around 21-20.5 Ma. the assumption of a constant velocity of rotation and the deviations of the Sardinia directions with respect to the stable Europe direction locate the end of the motion between 18.3 and 17.2 or 16.7 Ma (fig. 4). During the interval 18.35-17.5 Ma, the marine transgression took place. At the same period a NE-SW shortening interpreted as resulting from the collision of Sardinia with Apulia affected different parts of the island [Letouzey et al., 1982]. Consequently, the new paleomagnetic results and the tectono-sedimentary evolution are in favour of an end of the rotation at 17.5-18 Ma.

Direct and indirect root defences of milkweed (Asclepias syriaca): trophic cascades, trade-offs and novel methods for studying subterranean herbivory

P>1. Entomopathogenic nematodes can function as indirect defence for plants that are attacked by root herbivores. By releasing volatile organic compounds (VOCs), plants signal the presence of host insects and thereby attract nematodes.2. Nonetheless, how roots deploy indirect defences, how indirect defences relate to direct defences, and the ecological consequences of root defence allocation for herbivores and plant biomass are essentially unknown.3. We investigate a natural below-ground tritrophic system, involving common milkweed, a specialist root-boring beetle and entomopathogenic nematodes, and asked whether there is a negative genetic correlation between direct defences (root cardenolides) and indirect defences (emission of volatiles in the roots and nematode attraction), and between constitutive and inducible defences.4. Volatiles of roots were analysed using two distinct sampling methods. First, we collected emissions from living Asclepias syriaca roots by dynamic headspace sampling. This method showed that attacked A. syriaca plants emit five times higher levels of volatiles than control plants. Secondly, we used a solid phase micro-extraction (SPME) method to sample the full pool of volatiles in roots for genetic correlations of volatile biosynthesis.5. Field experiments showed that entomopathogenic nematodes prevent the loss of biomass to root herbivory. Additionally, suppression of root herbivores was mediated directly by cardenolides and indirectly by the attraction of nematodes. Genetic families of plants with high cardenolides benefited less from nematodes compared to low-cardenolide families, suggesting that direct and indirect defences may be redundant. Although constitutive and induced root defences traded off within each strategy (for both direct and indirect defence, cardenolides and VOCs, respectively), we found no trade-off between the two strategies.6. Synthesis. Constitutive expression and inducibility of defences may trade off because of resource limitation or because they are redundant. Direct and indirect defences do not trade off, likely because they may not share a limiting resource and because independently they may promote defence across the patchiness of herbivore attack and nematode presence in the field. Indeed, some redundancy in strategies may be necessary to increase effective defence, but for each strategy, an economy of deployment reduces overall costs.

Evaluation of the chicken transcriptome by SAGE of B cells and the DT40 cell line

Background: The understanding of whole genome sequences in higher eukaryotes depends to a large degree on the reliable definition of transcription units including exon/intron structures, translated open reading frames (ORFs) and flanking untranslated regions. The best currently available chicken transcript catalog is the Ensembl build based on the mappings of a relatively small number of full length cDNAs and ESTs to the genome as well as genome sequence derived in silico gene predictions.Results: We use Long Serial Analysis of Gene Expression (LongSAGE) in bursal lymphocytes and the DT40 cell line to verify the quality and completeness of the annotated transcripts. 53.6% of the more than 38,000 unique SAGE tags (unitags) match to full length bursal cDNAs, the Ensembl transcript build or the genome sequence. The majority of all matching unitags show single matches to the genome, but no matches to the genome derived Ensembl transcript build. Nevertheless, most of these tags map close to the 3' boundaries of annotated Ensembl transcripts.Conclusions: These results suggests that rather few genes are missing in the current Ensembl chicken transcript build, but that the 3' ends of many transcripts may not have been accurately predicted. The tags with no match in the transcript sequences can now be used to improve gene predictions, pinpoint the genomic location of entirely missed transcripts and optimize the accuracy of gene finder software.

Transcriptional regulation of MDR1, a gene involved in antifungal drug resistance in Candida albicans

ABSTRACT Upregulation of the Major Facilitator transporter gene MDR1 (Multi_drug Resistance 1) is one of the mechanisms observed in Candida albicans clinical isolates developing resistance to azole antifungal agents. To better understand this phenomenon, the cis-acting regulatory elements present in a modulatable reporter system under the control of the MDR1 promoter were characterized. In an azole-susceptible strain, transcription of this reporter is transiently upregulated in response to either benomyl or H2O2, whereas its expression is constitutively high in an azole-resistant strain (FR2). Two cis-acting regulatory elements, that are necessary and sufficient to convey the same transcriptional responses to a heterologous promoter (CDR2), were identified within the MDR1promoter. The first element, called BRE (for Benomyl Response Element, -296 to -260 with respect to the ATG start codon), is required for benomyl-dependent MDR1 upregulation and for constitutive high expression of MDR1 in FR2. The second element, termed HRE (for H2O2 Response Element, -561 to -520), is required for H2O2-dependent MDR1 upregulation, but is dispensable for constitutive high expression. Two potential binding sites (TTAG/CTAA) for the blip transcription factor Cap1p lie within the HRE. Moreover, inactivation of CAP1 abolished the transient response to H2O2 and diminished significantly the transient response to benomyl. Cap1p, which has been previously implicated in cellular responses to oxidative stress, may thus play a transacting and positive regulatory role in benomyl- and H2O2-dependent transcription of MDR1. However, it is not the only transcription factor involved in the response of MDR1 to benomyl. A minimal BRE element (-290 to -273) that is sufficient to detect in vitro sequence-specific binding of protein complexes in crude extracts prepared from C. albicans was also delimited. Genome-wide transcript profiling analyses undertaken with a matched pair of clinical isolates, one of which being azole-resistant and upregulating MDR1, and with an azole-susceptible strain exposed to benomyl, revealed that genes specifically upregulated by benomyl harbour in their promoters Cap1p binding site(s). This strengthened the idea that Cap1p plays a role in benomyl-dependent upregulation of MDR1. BRE-like sequences were also identified in several genes co-regulated with MDR1 in both conditions, which was consistent with the involvement of the BRE in both processes. A set of 147 mutants lacking a single transcription factor gene was next screened for loss of MDR1response to benomyl. Unfortunately, none of the tested mutants showed a loss of benomyl-dependent MDR1 upregulation. Nevertheless, a significant diminution of the response was observed in the mutants in which the MADS-box transcription factor Mcm1p and the C2H2 zinc finger transcription factor orf19.13374p were inactivated, suggesting that Mcm1p and orf19.13374p are involved in MDR1response to benomyl. Interestingly, the BRE contains a perfect match to the binding consensus of Mcm1p, raising the possibility that MDR1may be a direct target of this transcriptional activator. In conclusion, while the identity of the trans-acting factors that bind to the BRE and HRE remains to be confirmed, the tools we have developed during characterization of the cis-acting elements of the MDR1promoter should now serve to elucidate the nature of the components that modulate its activity. RESUME La surexpression du gène MDR1 (pour Résistance Multidrogue 1), qui code pour un transporteur de la famille des Major Facilitators, est l'un des mécanismes observés dans les isolats cliniques de la levure Candida albicans développant une résistance aux agents antifongiques appelés azoles. Pour mieux comprendre ce phénomène, les éléments de régulation agissant en cis dans un système rapporteur modulable sous le contrôle du promoteur MDR1 ont été caractérisés. Dans une souche sensible aux azoles, la transcription de ce rapporteur est transitoirement surélevée en réponse soit au bénomyl soit à l'agent oxydant H2O2, alors que son expression est constitutivement élevée dans une souche résistante aux azoles (souche FR2). Deux éléments de régulation agissant en cis, nécessaires et suffisants pour transmettre les mêmes réponses transcriptionnelles à un promoteur hétérologue (CDR2), ont été identifiés dans le promoteur MDR1. Le premier élément, appelé BRE (pour Elément de Réponse au Bénomyl, de -296 à -260 par rapport au codon d'initiation ATG) est requis pour la surexpression de MDR1dépendante du bénomyl et pour l'expression constitutive de MDR1 dans FR2. Le deuxième élément, appelé HRE (pour Elément de Réponse à l'H2O2, de -561 à -520), est requis pour la surexpression de MDR1 dépendante de l'H2O2, mais n'est pas impliqué dans l'expression constitutive du gène MDR1. Deux sites de fixation potentiels (TTAG/CTAA) pour le facteur de transcription Cap1p ont été identifiés dans l'élément HRE. De plus, l'inactivation de CAP1 abolit la réponse transitoire à l'H2O2 et diminua significativement la réponse transitoire au bénomyl. Cap1p, qui est impliqué dans les réponses de la cellule au stress oxydatif, doit donc jouer un rôle positif en trans dans la surexpression de MDR1 dépendante du bénomyl et de l'H2O2. Cependant, ce n'est pas le seul facteur de transcription impliqué dans la réponse au bénomyl. Un élément BRE d'une longueur minimale (de -290 à -273) a également été défini et est suffisant pour détecter une interaction spécifique in vitro avec des protéines provenant d'extraits bruts de C. albicans. L'analyse du profil de transcription d'une paire d'isolats cliniques comprenant une souche résistante aux azoles surexprimant MDR1, et d'une souche sensible aux azoles exposée au bénomyl, a révélé que les gènes spécifiquement surexprimés par le bénomyl contiennent dans leurs promoteurs un ou plusieurs sites de fixation pour Cap1p. Ceci renforce l'idée que Cap1p joue un rôle dans la surexpression de MDR1dépendante du bénomyl. Une ou deux séquences ressemblant à l'élément BRE ont également été identifiées dans la plupart des gènes corégulés avec MDR1 dans ces deux conditions, ce qui était attendu compte-tenu du rôle joué par cet élément dans les deux processus. Une collection de 147 mutants dans lesquels un seul facteur de transcription est inactivé a été testée pour la perte de réponse au bénomyl de MDR1. Malheureusement, la surexpression de MDR1 dépendante du bénomyl n'a été perdue dans aucun des mutants testés. Néanmoins, une diminution significative de la réponse a été observée chez des mutants dans lesquels le facteur de transcription à MADS-box Mcm1p et le facteur de transcription à doigts de zinc de type C2H2 orf19.13374p ont été inactivés, suggérant que Mcm1p et orf19.13374p sont impliqués dans la réponse de MDR1au bénomyl. Il est intéressant de noter que la BRE contient une séquence qui s'aligne parfaitement avec la séquence consensus du site de fixation de Mcm1p, ce qui soulève la possibilité que MDR1 pourrait être une cible directe de cet activateur transcriptionnel. En conclusion, alors que l'identité des facteurs agissant en trans en se fixant à la BRE et à la HRE reste à être confirmée, les outils que nous avons développés au cours de la caractérisation des éléments agissant en cis sur le promoteur MDR1 peut maintenant servir à élucider la nature des composants modulant son activité.

Sähkökoneen staattorikäämityksen kehittäminen

Tämä insinöörityö tehtiin ABB:n Pitäjänmäen konetehtaalle Tahtikoneet-tulosyksikölle. Työssä tutkittiin mahdollisuuksia valmistaa murtovakovyyhtejä kestomagneettituuligeneraattoreihin, joissa vakoluku on alle yhden. Työ tehtiin tutustumalla aluksi Pitäjänmäen konetehtaan käytössä oleviin vyyhden valmistus- ja käämintämenetelmiin. Lisäksi tutkittiin erilaisia mahdollisia murtovakovyyhden valmistusmenetelmiä, joista lupaavimpia myös kokeiltiin. Saatujen kokemusten pohjalta valittiin vyyhden valmistusmenetelmä, jonka mukaan valmistettiin koe-erä. Koe-erälle suoritettiin mittauksia, joilla varmistettiin niiden sähköinen kestävyys Työn tuloksena valitulla valmistusmenetelmällä valmistettiin vyyhdet prototyyppi tuuligeneraattorin.

Diversity of Pentatomoidea (Hemiptera) in riparian forests of southern Brazil: taller forests, more bugs

Riparian forests are important features of any ecosystem, especially on grassland and savannah vegetation types. However, riparian forests in southernmost Brazil have received much less attention than elsewhere. This is the first quantitative study of pentatomoid (Hemiptera) diversity in the Pampa biome, surveying riparian forests of brooks and rivers in the environs of the municipality of Bagé, Rio Grande do Sul state, southern Brazil. The aim was two-fold: taxonomic characterization of the fauna and a primary ecological study of bug diversity. Sweeping net and beating tray were used to sample trees and shrubs on the border of sampling sites; sampling was carried out during three consecutive days, from March 28th to 30th 2006. Overall 154 individuals of 32 species of Pentatomoidea were captured, almost all species are new records for the local fauna. Taller forest canopy sites had higher abundance overall and higher species richness than shorter forest canopy sites. Of the 32 species, 11 were singletons and four were doubletons. There were no differences for pentatomoid species composition between the two environments differing in vegetation structure. Association to the Pampa biome of the most abundant species found are discussed. Although based on a rapid assessment protocol of faunal inventories, our results add important bioecological information to the pentatomoid fauna of the Pampa biome, especially associated to riparian forests.

Diversity of the euglossine bee community (Hymenoptera, Apidae) of an Atlantic Forest remnant in southeastern Brazil

Diversity of the euglossine bee community (Hymenoptera, Apidae) of an Atlantic Forest remnant in southeastern Brazil. Euglossine bees, attracted to scent baits of cineole, eugenol and vanillin, were collected with entomological nets, from December 1998 to November 1999. Samplings were carried out once a month simultaneously by two collectors positioned in two different sites in an Atlantic Forest remnant in northeastern São Paulo state, Brazil. A total of 859 male euglossine bees, belonging to 13 species and four Euglossini genera were collected. Of the total sample, 506 (12 species) males were captured at site A and 353 (10 species) were collected at site B.In both sites, Euglossa pleosticta Dressler, 1982 was the most abundant species (45.79%), followed by Eulaema nigrita Lepeletier, 1841 (20.79%). The results of this study supply new information about the diversity of orchid bee fauna in Atlantic Forest remnants as well as show that more than one site is needed to sample these bees in a fragmented landascape.

Which is the optimal sampling strategy for habitat suitability modelling

Designing an efficient sampling strategy is of crucial importance for habitat suitability modelling. This paper compares four such strategies, namely, 'random', 'regular', 'proportional-stratified' and 'equal -stratified'- to investigate (1) how they affect prediction accuracy and (2) how sensitive they are to sample size. In order to compare them, a virtual species approach (Ecol. Model. 145 (2001) 111) in a real landscape, based on reliable data, was chosen. The distribution of the virtual species was sampled 300 times using each of the four strategies in four sample sizes. The sampled data were then fed into a GLM to make two types of prediction: (1) habitat suitability and (2) presence/ absence. Comparing the predictions to the known distribution of the virtual species allows model accuracy to be assessed. Habitat suitability predictions were assessed by Pearson's correlation coefficient and presence/absence predictions by Cohen's K agreement coefficient. The results show the 'regular' and 'equal-stratified' sampling strategies to be the most accurate and most robust. We propose the following characteristics to improve sample design: (1) increase sample size, (2) prefer systematic to random sampling and (3) include environmental information in the design'

The effects of dominance, regular inbreeding and sampling design on Q(ST), an estimator of population differentiation for quantitative traits.

To test whether quantitative traits are under directional or homogenizing selection, it is common practice to compare population differentiation estimates at molecular markers (F(ST)) and quantitative traits (Q(ST)). If the trait is neutral and its determinism is additive, then theory predicts that Q(ST) = F(ST), while Q(ST) > F(ST) is predicted under directional selection for different local optima, and Q(ST) < F(ST) is predicted under homogenizing selection. However, nonadditive effects can alter these predictions. Here, we investigate the influence of dominance on the relation between Q(ST) and F(ST) for neutral traits. Using analytical results and computer simulations, we show that dominance generally deflates Q(ST) relative to F(ST). Under inbreeding, the effect of dominance vanishes, and we show that for selfing species, a better estimate of Q(ST) is obtained from selfed families than from half-sib families. We also compare several sampling designs and find that it is always best to sample many populations (>20) with few families (five) rather than few populations with many families. Provided that estimates of Q(ST) are derived from individuals originating from many populations, we conclude that the pattern Q(ST) > F(ST), and hence the inference of directional selection for different local optima, is robust to the effect of nonadditive gene actions.

Les souris (Mus domesticus) du tunnel du Simplon: leur origine et hypothèses sur leur écologie

The Simplon tunnel is a railway connection trough the Alps between Brig (Switzerland) and Iselle (Italy). Constructed at the beginning of the last century, it consists of two parallel, interconnected tunnels of 19.8 km each. Due to geothermal conditions, its temperature of 29°C is seasonally invariable. Stories about blind mice induced us to sample small mammals in the central part of the tunnel. We used 30 Longworth traps, set in 6 groups of 5 traps. After a prebaiting period of 2 weeks, the traps were opened during one night. We captured 10 Mus domesticus Rutty, 1772. A karyological analysis showed that they had the standard diploid number of 2n = 40, as mice from Brig. Mice from the Val d'Ossola (Italian side of the tunnel) had a karyotype of 2n = 24 with two specific Robertsonian fusion, Rb(5.8) and Rb(7.15). This "Domodossola race" belongs to the Lago Maggiore sub-groupe. As a conclusion, the tunnel colonisation took place from the north. With a density of about 5 - 10 mice per km, a rough estimate of the total tunnel population is about 200 - 400 mice. The few pick-nick left-overs from workers active in the tunnel cannot sustain such a population. It is concluded that the mice, as well as the regularly encountered Gryllus domesticus, are living from human faeces, dropped from the water closets of the trains. Low food resources, lack of predators and perhaps lack of accidents imply a density dependent population control, coupled with a low reproduction rate.

Lag-one autocorrelation in short series: Estimation and hypothesis testing

In the first part of the study, nine estimators of the first-order autoregressive parameter are reviewed and a new estimator is proposed. The relationships and discrepancies between the estimators are discussed in order to achieve a clear differentiation. In the second part of the study, the precision in the estimation of autocorrelation is studied. The performance of the ten lag-one autocorrelation estimators is compared in terms of Mean Square Error (combining bias and variance) using data series generated by Monte Carlo simulation. The results show that there is not a single optimal estimator for all conditions, suggesting that the estimator ought to be chosen according to sample size and to the information available of the possible direction of the serial dependence. Additionally, the probability of labelling an actually existing autocorrelation as statistically significant is explored using Monte Carlo sampling. The power estimates obtained are quite similar among the tests associated with the different estimators. These estimates evidence the small probability of detecting autocorrelation in series with less than 20 measurement times.