Drug loading of mesoporous silicon particles

Porous silicon (PSi) is a promising material to be utilized in drug delivery formulations. The release rate of the drug compound can be controlled by changing the pore properties and surface chemistry of PSi. The loading of a poorly soluble drug into mesoporous silicon particles enhances its dissolution in the body. The drug loading is based on adsorption. The attainable maximum loaded amount depends on the properties of the drug compound and the PSi material, and on the process conditions. The loading solvent also essentially affects the adsorption process. The loading of indomethacin into PSi particles with varying surface modification was studied. Solvent mixtures were applied in the loading, and the loaded samples were analyzed with thermal analysis methods. The best degree of loading was obtained using a mixture of dichloromethane and methanol. The drug loads varied from 7.7 w-% to 26.8 w-%. A disturbing factor in the loading experiments was the tendency of indomethacin to form solvates with the solvents applied. In addition, the physical form and stability of indomethacin loaded in PSi and silica particles were studied using Raman spectroscopy. In the case of silica, the presence of crystalline drug as well as the polymorph form can be detected, but the method proved to be not applicable for PSi particles.

Idiosyncratic Volatility Puzzle: Influence of Macro-Finance Factors

In this paper, we scrutinize the cross-sectional relation between idiosyncratic volatility and stock returns. As a novelty, the idiosyncratic volatility is obtained by conditioning upon macro-finance factors as well as upon traditional asset pricing factors. The macro-finance factors are constructed from a large pool of macroeconomic and financial variables. Cleaning for macro-finance e§ects reverses the puzzling negative relation between returns and idiosyncratic volatility documented previously. Portfolio analysis shows that the effects from macro-finance factors are economically strong. The relation between idiosyncratic volatility and returns does not vary with the NBER business cycles. The empirical results are highly robust. Keywords: Idiosyncratic volatility puzzle; Macro-finance predictors; Factor analysis; Business cycle. JEL Classifications: G12; G14

Coexistence of Two Kinds of Fluorinated Hydrogenated Micelles as Building Blocks for the Design of Bimodal Mesoporous Silica with Two Ordered Mesopore Networks

A simple and effective route has been developed for the synthesis of bimodal (3.6 and 9.4 nm) mesoporous silica materials that have two ordered interconnected pore networks. Mesostructures have been prepared through the self assembly mechanism by using a mixture of polyoxyethylene fluoroalkyl ether and triblock copolymer as building block. The investigation of the RF8(EO)9/P123/water phase diagram evidences that in the considered surfactant range of concentrations, the system is micellar (L1). DLS measurements indicate that this micellar phase is composed of two types of micelles, the size of the first one at around 7.6 nm corresponds unambiguously to the pure fluorinated micelles. The second type of micelles at higher diameter consists of fluorinated micelles which have accommodated a weak fraction of P123 molecules. Thus, in this study the bimodal mesoporous silica are really templated by two kinds of micelles.

Tailored Jeffamine molecular tools for ordering mesoporous Silica

Herein, we report the formation of organized mesoporous silica materials prepared from a novel nonionic gemini surfactant, myristoyl-end capped Jeffamine, synthesized from a polyoxyalkyleneamine (ED900). The behavior of the modified Jeffamine in water was first investigated. A direct micellar phase (L1) and a hexagonal (H1) liquid crystal were found. The structure of the micelles was investigated from the SAXS and the analysis by Generalized Indirect Fourier Transformation (GIFT), which show that the particles are globular of coreshell type. The myristoyl chains, located at the ends of the amphiphile molecule are assembled to form the core of the micelles and, as a consequence, the molecules are folded over on themselves. Mesoporous materials were then synthesized from the self-assembly mechanism. The recovered materials were characterized by SAXS measurements, nitrogen adsorptiondesorption analysis, transmission and scanning electron microscopy. The results clearly evidence that by modifying the synthesis parameters, such as the surfactant/silica precursor molar ratio and the hydrothermal conditions, one can control the size and the nanostructuring of the resulting material. It was observed that, the lower the temperature of the hydrothermal treatment, the better the mesopore ordering.

Comparative effects of macro-sized aluminum oxide and aluminum oxide nanoparticles on erythrocyte hemolysis: influence of cell source, temperature and size

Al2O3 is the most abundantly produced nanomaterial and has been used in diverse fields, including the medical, military and industrial sectors. As there are concerns about the health effects of nanoparticles, it is important to understand how they interact with cells, and specifically with red blood cells. The hemolysis induced by three commercial nano-sized aluminum oxide particles (nanopowder 13 nm, nanopowder <50 nm and nanowire 2-6 nm × 200-400 nm) was compared to aluminum oxide and has been studied on erythrocytes from humans, rats and rabbits, in order to elucidate the mechanism of action and the influence of size and shape on hemolytic behavior. The concentrations inducing 50% hemolysis (HC50) were calculated for each compound studied. The most hemolytic aluminum oxide particles were of nanopowder 13, followed by nanowire and nanopowder 50. The addition of albumin to PBS induced a protective effect on hemolysis in all the nano-forms of Al2O3, but not on Al2O3. The drop in HC50 correlated to a decrease in nanomaterial size, which was induced by a reduction of aggregation Aluminum oxide nanoparticles are less hemolytic than other oxide nanoparticles, and behave differently depending on the size and shape of the nanoparticles. The hemolytic behavior of aluminum oxide nanoparticles differs from that of aluminum oxide.

Comparative effects of macro-sized aluminum oxide and aluminum oxide nanoparticles on erythrocyte hemolysis: influence of cell source, temperature and size

Al2O3 is the most abundantly produced nanomaterial and has been used in diverse fields, including the medical, military and industrial sectors. As there are concerns about the health effects of nanoparticles, it is important to understand how they interact with cells, and specifically with red blood cells. The hemolysis induced by three commercial nano-sized aluminum oxide particles (nanopowder 13 nm, nanopowder <50 nm and nanowire 2-6 nm × 200-400 nm) was compared to aluminum oxide and has been studied on erythrocytes from humans, rats and rabbits, in order to elucidate the mechanism of action and the influence of size and shape on hemolytic behavior. The concentrations inducing 50% hemolysis (HC50) were calculated for each compound studied. The most hemolytic aluminum oxide particles were of nanopowder 13, followed by nanowire and nanopowder 50. The addition of albumin to PBS induced a protective effect on hemolysis in all the nano-forms of Al2O3, but not on Al2O3. The drop in HC50 correlated to a decrease in nanomaterial size, which was induced by a reduction of aggregation Aluminum oxide nanoparticles are less hemolytic than other oxide nanoparticles, and behave differently depending on the size and shape of the nanoparticles. The hemolytic behavior of aluminum oxide nanoparticles differs from that of aluminum oxide.

Um panorama da nanotecnologia no Brasil (e seus macro-desafios)

The objectives of this essay are to describe the development of nanoscience and nanotechnology (N&N) in Brazil. The analysis shows that Brazilian research in N&N is considered satisfactory and, although under other denominations, dates from at least 20 years. Innovation is still less satisfactory and there are different points of views on the issue. However, there is already a tendency towards the promotion of innovation in nanotechnology in the country. Scientists and the industrial sector have been showing interest in partnerships and some scientific policies stimulate this articulation between academy and companies.

Estudo morfológico macro e microscópico da gastrite cáustica em ratos

OBJETIVOS: A ingestão de álcalis provoca graves lesões no tubo digestório alto. A comercialização de substâncias cáusticas em forma líquida facilita o seu uso com intenções suicidas e torna as afecções por elas provocadas relativamente comuns. Nesse sentido, o objetivo do presente trabalho foi avaliar as conseqüências morfológicas da infusão de substância cáustica no estômago murino. MÉTODO: Foram estudados 20 ratos Wistar adultos, de ambos os sexos. Após jejum alimentar de 12 horas, instilou-se 1ml de hidróxido de sódio (NaOH) a 5% através de cateter orogástrico. Os ratos foram divididos aleatoriamente em quatro grupos (n=5), de acordo com o tempo de acompanhamento: 24 horas, sete dias, 30 dias e 90 dias, respectivamente. Decorrido o tempo de acompanhamento, os ratos foram mortos e seus estômagos foram avaliados macro e microscopicamente. RESULTADOS: Após 24 horas, os estômagos estavam dilatados e com aderências ao fígado, omentos e pâncreas. Suas mucosa e submucosa apresentavam áreas de necrose de coagulação do corpo e do antro entremeada por intensa infiltração bacteriana. Após sete dias, os estômagos permaneciam dilatados e mantendo o mesmo padrão necrótico anterior, porém sem os focos sépticos. Nos grupos de um e três meses, a cavidade abdominal teve aspecto normal. Os estômagos apresentavam consistência endurecida e com proliferação fibrovascular. CONCLUSÃO: Os animais que sobreviveram à necrose e à intensa infiltração bacteriana da primeira semana desenvolveram reparação progressiva de seus estômagos, porém acompanhada de complicações decorrentes da fibrose cicatricial.

Avaliação macro e microscópica dos testículos em modelo experimental de criptorquidia pela secção do Gubernaculum testis em ratos

OBJETIVO: Verificar o efeito da secção distal do Gubernaculum testis como modelo experimental de criptorquidia unilateral em ratos. MÉTODO: Foram usados 36 ratos machos de linhagem Wistar-EPM, distribuídos em dois grupos: A (Grupo Experimento: animais submetidos à secção distal do gubernaculum direito) e B (Grupo Controle: operação simulada do lado direito). Cada grupo foi subdividido em 3 subgrupos com 6 animais cada : A-1, A-2 e A-3: B-1, B-2 e B-3. Os animais dos subgrupos A-1 e B-1 foram re-operados após 30 dias. Os animais dos subgrupos A-2 e B-2 foram mortos após 50 dias e os dos subgrupos A-3 e B-3 após 90 dias. RESULTADOS: Houve diferenças quanto ao peso, tamanho e posição do testículo afetado em relação ao lado controle,as quais só foram evidenciadas a partir do subgrupo A-2 (50 dias).O testículo não foi palpável na bolsa testicular em 88,9% dos casos e não houve óbito dos animais. Foram observadas alterações da maturidade celular, atrofia tubular, diminuição do diâmetro dos túbulos e ausência de espermatozóides na luz tubular no grupo A e presença de normalidade histológica para a idade nos animais do grupo B. CONCLUSÃO: O modelo experimental de produção de criptorquidia experimental unilateral pela secção do Gubernaculum testis em ratos foi eficaz e prático.

Análises macro e microscópicas de enxertos cutâneos por semeadura após laserterapia de baixa intensidade

OBJETIVO: observar se a laserterapia de baixa intensidade acelera o processo inflamatório, a cicatrização e epitelização de enxertos cutâneos por semeadura. MÉTODOS: vinte ratos foram submetidos a esta técnica de enxertia e divididos em dois grupos iguais, um tratado com laser e outro controle. RESULTADOS: houve menor tempo de reação inflamatória, maior velocidade de cicatrização, epitelização e queratinização nos animais tratados com laser em relação aos não tratados. CONCLUSÃO: a laserterapia de baixa intensidade é efetiva no auxílio ao tratamento de enxertos por semeadura.

Morfologia macro e microscópica das papilas linguais do quati (Nasua nasua)

O quati (Nasua nasua) é um animal que pertence à Família Procyonidae. Foram utilizados três animais ortotanasiados, de ambos os sexos, provenientes do Criatório Científico de Animais Silvestres, Centro Universitário Fundação de Ensino Octávio Bastos (Cecrimpas, Unifeob) autorizado pelo IBAMA (Proc.02027.003731/04-76). Para a análise macroscópica, as línguas foram retiradas, analisadas e foto-documentadas. Para análise microscópica, as línguas foram processadas rotineiramente pela técnica de microscopia eletrônica de varredura e inclusão em Paraplast; pela técnica de microscopia de luz os fragmentos foram cortados em micrótomo, com espessura média de 5mm e corados em HE e Picrosírius com fundo de hematoxilina. Os resultados macroscópicos e microscópicos mostram que a língua do quati apresenta papilas filiformes, fungiformes, valadas e cônicas sendo estas distribuídas nas regiões rostralis, medialis e caudalis. Histologicamente, a língua do quati é revestida por um epitélio pavimentoso estratificado queratinizado apresentando camada basal, espinhosa, granulosa e córnea com fibras de músculos estriados esqueléticos longitudinais e transversais e diversas glândulas. De acordo com os resultados pode-se concluir que a língua do quati possui características macroscópicas e microscópicas semelhantes aos canídeos, tendo como diferença o número de papilas valadas e o grau de queratinização.

Non-linear analysis of laminated metal matrix composites by an integrated micro/macro-mechanical model

The present paper describes an integrated micro/macro mechanical study of the elastic-viscoplastic behavior of unidirectional metal matrix composites (MMC). The micromechanical analysis of the elastic moduli is based on the Composites Cylinder Assemblage model (CCA) with comparisons also draw with a Representative Unit Cell (RUC) technique. These "homogenization" techniques are later incorporated into the Vanishing Fiber Diameter (VFD) model and a new formulation is proposed. The concept of a smeared element procedure is employed in conjunction with two different versions of the Bodner and Partom elastic-viscoplastic constitutive model for the associated macroscopic analysis. The formulations developed are also compared against experimental and analytical results available in the literature.

Teores de macro e micronutrientes e a relação c/n de várias espécies de plantas daninhas

O objetivo do presente trabalho foi determinar os teores de nutrientes (N, P, K, Ca, Mg, S, Cu, Zn, Fe e Mn) e a relação C/N, presentes na matéria seca da parte aérea das seguintes espécies de plantas daninhas: Ageratum conyzoides L., Amaranthus lividus L., Bidens pilosa L., Brachiaria decumbens Stapf., Brachiaria plantaginea (Link) Hitchc., Senna occidentalis (L.) Link., Commelina benghalensis L., Cyperus rotundus L., Digitaria horizontalis Willd., Euphorbia heterophylla L., Indigofera truxillensis H.B.K., Ipomoea acuminata Roem. et Schult, Panicum maximum Jacq., Raphanus raphanistrum L., Rhynchelytrum repens (Willd.) C.E. Hubb., Richardia brasiliensis Gomez e Sida cordifolia L. Os teores de macronutrientes obtidos da matéria seca das plantas daninhas, foram maiores em geral nas dicotiledôneas. Em relação às monocotiledôneas não houve um padrão de comportamento para os micronutrientes. Entretanto, o teores de carbono foram, em média, superiores para todas as monocotiledôneas, sendo que as dicotiledôneas apresentaram relações C/N menores do que as monocotiledôneas.