Lighting energy saving due to the use of direct sunlight

This paper describe a simulation program, which uses Trengenza’s average room illuminance method in conjunction with hourly solar irradiance and luminous efficacy, to predict the potential lighting energy saving for a side-lit room. Two lighting control algorithms of photoelectric switching (on/off) and photoelectric dimming (top-up) have been coded in the program. A simulation for a typical UK office room has been conducted and the results show that energy saving due to the sunlight dependent on the various factors such as orientation, control methods, building depth, glazing area and shading types, etc. This simple tool can be used for estimating the potential lighting energy saving of the windows with various shading devices at the early design stage.

Assessing the impact of occupant behaviour on the electricity consumption for lighting and small power in office buildings

Lighting and small power will typically account for more than half of the total electricity consumption in an office building. Significant variations in electricity used by different tenants suggest that occupants can have a significant impact on the electricity demand for these end-uses. Yet current modelling techniques fail to represent the interaction between occupant and the building environment in a realistic manner. Understanding the impact of such behaviours is crucial to improve the methodology behind current energy modelling techniques, aiming to minimise the significant gap between predicted and in-use performance of buildings. A better understanding of the impact of occupant behaviour on electricity consumption can also inform appropriate energy saving strategies focused on behavioural change. This paper reports on a study aiming to assess the intent of occupants to switch off lighting and appliances when not in use in office buildings. Based on the Theory of Planned Behaviour, the assessment takes the form of a questionnaire and investigates three predictors to behaviour individually: 1) behavioural attitude; 2) subjective norms; 3) perceived behavioural control. The paper details the development of the assessment procedure and discusses preliminary findings from the study. The questionnaire results are compared against electricity consumption data for individual zones within a multi-tenanted office building. Initial results demonstrate a statistically significant correlation between perceived behavioural control and energy consumption for lighting and small power

Simple prompts reduce inadvertent energy consumption from lighting in office buildings

Building designs regularly fail to achieve the anticipated levels of in-use energy consumption. The interaction of occupants with building controls is often cited as a key factor behind this discrepancy. This paper examines whether one factor in inadvertent energy consumption might be the appearance of post-completion errors (when an intended action is not taken because a primary goal has already been accomplished) in occupants’ interactions with building controls. Post-completion errors have been widely studied in human-computer interaction but the concept has not previously been applied to the interaction of occupants with building controls. Two experiments were carried out to examine the effect of incorporating two different types of simple prompt to reduce post-completion error in the use of light switches in office meeting rooms. Results showed that the prompts were effective and that occupants switched off lights when leaving the room more often when presented with a normative prompt than with a standard injunction. Additionally, an over reliance on PIR sensors to turn off lights after meetings was observed, which reduced their intended energy savings. We conclude that achieving low carbon buildings in practice is not solely a technological issue and that application of user-models from human-computer interaction will encourage appropriate occupant interaction with building controls and help reduce inadvertent energy consumption.

Channel equalization for indoor lighting communications networks

We consider indoors communications networks using modulated LEDs to transmit the information packets. A generic indoor channel equalization formulation is proposed assuming the existence of both line of sight and diffuse emitters. The proposed approach is of relevance to emergent indoors distributed sensing modalities for which various lighting based network communications protocols are considered.

Lighting and violent crimes: evaluating the effect of an electrification policy in rural Brazil on violent crime reduction

This paper estimates the effect of lighting on violent crime reduction. We explore an electrification program (LUZ PARA TODOS or Light for All - LPT) adopted by the federal government to expand electrification to rural areas in all Brazilian municipalities in the 2000s as an exogenous source of variation in electrification expansion. Our instrumental variable results show a reduction in homicide rates (approximately five homicides per 100,000 inhabitants) on rural roads/urban streets when a municipality moved from no access to full coverage of electricity between 2000 and 2010. These findings are even more significant in the northern and northeastern regions of Brazil, where rates of electrification are lower than those of the rest of the country and, thus, where the program is concentrated. In the north (northeast), the number of violent deaths on the streets per 100,000 inhabitants decreased by 48.12 (13.43). This moved a municipality at the 99th percentile (75th) to the median (zero) of the crime distribution of municipalities. Finally, we do not find effects on violent deaths in households and at other locations. Because we use an IV strategy by exploring the LPT program eligibility criteria, we can interpret the results as the estimated impact of the program on those experiencing an increase in electricity coverage due to their program eligibility. Thus, the results represent local average treatment effects of lighting on homicides.

Reproductive responses of rabbit does to a supplemental lighting program

The objective was to investigate whether the productivity of rabbit does can be improved, when natural photoperiod is decreasing, by adopting a supplemental lighting program. Three experiments were conducted involving two groups: control, submitted to the natural decreasing photoperiod, and supplemented with a lighting program which provided 14 h light/24 h beginning at 10 weeks of age. In the first experiment, 20 nulliparous does, 10 from each group, were euthanized 8 h after being presented to a buck; the overall number of follicles, whose diameter exceeded I mm, was determined macroscopically. The right ovaries were collected, histologically analyzed, and electronically measured. In the second experiment, 30 nulliparous does, 15 from each group, were presented to a buck (day 1). Receptive does were euthanized on day 8 to evaluate embryonic survival (number of normal embryos/ovulation rate). In the third experiment, 48 nulliparous does, 24 from each group, were followed from the first presentation to the buck until the weaning of the first litter. The effect of treatment on reproductive and body weight traits of does, and litter performance traits, at birth and weaning, was evaluated. The average number of follicles whose diameter exceeded 1 mm was higher in the treatment group (12.05 +/- 1.07 vs. 8.63 +/- 1.00, P=0.03 7). Receptive does of the treatment group had heavier ovaries relative to those of the control group (790 +/- 59 vs. 470 +/- 64 mg, P=0.004), whereas no treatment difference regarding this trait was found for non-receptive ones. Treatment had a favorable effect on pregnancy rate of total exposed and of receptive does (80.0% vs. 33.3%, P=0.01, and 92.3% vs. 50.0%, P=0.02, respectively). The number of underdeveloped embryos was lower (0.067 +/- 0.380 vs. 2.500 +/- 0.455, P=0.004), embryonic survival up to day 8, and uterus weight was higher in the treatment group (0.839 +/- 0.075 vs. 0.534 +/- 0.087, P=0.033 and 13.83 +/- 0.72 vs. 10.99 +/- 0.84, P=0.037, respectively). Number of presentations tended to be lower (1.32 +/- 0.17 vs. 1.75 +/- 0.16, P=0.077) and adjusted litter size in the first reproductive cycle tended to be higher (7.09 +/- 0.89 vs. 5.22 +/- 0.68, P=0.091) in the treatment group relative to the control.

Light emitting diode (LED) use in artificial lighting for broiler chicken production

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Investigations on PVP/Y3BO6:Eu3+, a red Luminescent composite for lighting devices based on near UV-LEDs

This work deals with a red phosphor. Y3BO6:Eu3+, and its corresponding poly(N-vinylpyrrolidone) (PVP)/Y3BO6:Eu3+ luminescent composite film suitable for applications in the next generation of Hg-free lamps based on near ultraviolet (UV) light emitting diodes (LEDs). Well crystallized samples of Y3BO6 powders with the Eu3+ content up to 20 mol% were prepared by the Pechini method. After structural, morphological and optical characterization, the best doping rate of Eu3+ in the matrix was determined to be 15 mol%. This optimal powder, which is highly friable, was easily ground into fine particles and homogeneously dispersed into a PVP polymer solution to give rise to a polymer phosphor composite. Structural and optical features of the composite film have been studied and compared to those of a pristine PVP film and Y3BO6:Eu3+ powder. All the characterization (XRD, SAXS, luminescence...) proved that the red phosphor particles are well incorporated into the polymer composite film which exhibited the characteristic red emission of Eu3+ under UV light excitation. Furthermore, photostability of the polymer/phosphor composite film under UV-LED irradiation was evaluated from exposure to accelerated artificial photoageing at wavelengths above 300 nm.

Smooth light extraction in lighting optical fibre

Smooth light extraction in lighting optical fibre

High-efficiency voltage regulator and stabilizer for outdoor lighting installations

This paper presents a high performance system of regulation and stabilization of luminous flux for public street lighting installations. Its purpose is to reduce the luminous flux of the luminaries efficiently by reducing their voltage supply, resulting in the improvement of energy efficiency in the installation. The system is basically composed of electromagnetic components which provide robustness and high-performance to the device, as well as minimum maintenance requirements. However, the voltage regulation is based on the application of voltage steps. Aging studies of the luminaries have been carried out to analyze the impact of this discrete voltage regulation. A specific prototype of this voltage and stabilizer regulator have been in operation in a real outdoor lighting installation for more than one year.

Advances in optics for solid state lighting

Optics and LEDs, design Methods, design examples, conclusions

Lighting technology

From the economic point of view, additional lighting at night causes enormous costs and is responsible for using up a massive percentage of the worlds energy resources. During recent years, development trends in the field of LED technology have paved the way for novel concepts impacting on the subject oflight. In this way, the abovementioned issues can be greatly reduced resulting in a better balance between the environment and human needs.