Retrofit versus new-build house using life-cycle assessment

This paper reports the findings of research on the environmental performance of two case-study houses, a retrofit and new build. The retrofit was completed to a Passivhaus standard while the new build was completed to current Irish building regulations. Environmental performance of the retrofit and new build was measured using life-cycle assessments, examining the assembly, operational and end-of-life stage over life spans of 50 and 80 years. Using primary information, life-cycle assessment software and life-cycle assessment databases the environmental impacts of each stage were modelled. The operational stage of both case studies was found to be the source of the most significant environmental damage, followed by the assembly and the end-of-life stage respectively. The relative importance of the assembly and end-of-life stage decreased as the life span increased. It was found that the retrofit house studied outperformed the new build in the assembly and operational stage, whereas the new build performed better in the end-of-life stage; however, this is highly sensitive, depending on the standards to which both are completed. Operational energy savings pre- and post-retrofit were significant, indicating the future potential for adoption of high-quality retrofitting practices.

A streamlined life-cycle assessment and decision tool for used tyres recycling

In order to achieve progress towards sustainable resource management, it is essential to evaluate options for the reuse and recycling of secondary raw materials, in order to provide a robust evidence base for decision makers. This paper presents the research undertaken in the development of a web-based decision-support tool (the used tyres resource efficiency tool) to compare three processing routes for used tyres compared to their existing primary alternatives. Primary data on the energy and material flows for the three routes, and their alternatives were collected and analysed. The methodology used was a streamlined life-cycle assessment (sLCA) approach. Processes included were: car tyre baling against aggregate gabions; car tyre retreading against new car tyres; and car tyre shred used in landfill engineering against primary aggregates. The outputs of the assessment, and web-based tool, were estimates of raw materials used, carbon dioxide emissions and costs. The paper discusses the benefits of carrying out a streamlined LCA and using the outputs of this analysis to develop a decision-support tool. The strengths and weakness of this approach are discussed and future research priorities identified which could facilitate the use of life cycle approaches by designers and practitioners.

"New" and "Old" Social Risks: Life Cycle and Social Class Perspectives on Social Exclusion in Ireland

The life cycle concept has come to have considerable prominence in Irish social policy debate. However, this has occurred without any systematic effort to link its usage to the broader literature relating to the concept. Nor has there been any detailed consideration of how we should set about operationalising the concept. In this paper we argue the need for "macro" life cycle perspectives that have been influenced by recent challenges to the welfare state to be combined with "micro" perspectives focusing on the dynamic and multidimensional nature of social exclusion. We make use of Irish EU-SILC 2005 data in developing a life cycle schema and considering its relationship to a range of indicators of social exclusion. At the European level renewed interest in the life cycle concept is associated with the increasing emphasis on the distinction between "new" and "old" social risks and the notion that the former are more "individualised". Inequality and poverty rather than being differentially distributed between social classes are thought to vary between phases in the average work life. Our findings suggest the "death of social class" thesis is greatly overblown. A more accurate appreciation of the importance of new and old social risks requires that we systematically investigate the manner in which factors such as social class and the life cycle interact.

Life-Cycle Energy Analysis of a Modular/Off-Site Building School

This paper is concerned with assessing the building’s the energy efficiency and qualities of a modular design for the education industry, in order assess the long economic benefits. The research includes a life-cycle energy and cost analysis of the school building design, predicting the impact on the operational cost of the building as a result of the addition of photovoltaic panels. The paper also includes a comparative study between the ECO Modular Solutions building, and a current standard prefabricated school building, quantifying the savings in CO2 emissions and savings in cost.

Life Cycle Assessment guidelines for the sustainable production and recycling of aggregates:The Sustainable Aggregates Resource Management project (SARMa)

The mining/quarrying industry is a sector of industry where there are very few Life Cycle Assessment (LCA) tools, and where the role of LCA has been poorly investigated. A key issue is the integration of three inter-dependent life cycles: Project, Asset and Product. Given the unique features of mining LCAs, this Note from the Field presents a common methodology implemented within the Sustainable Aggregates Resource Management (SARMa) Project (www.sarmaproject.eu) in order to boost adoption of LCA in the aggregate industry in South Eastern Europe. The proposed methodology emphasises the importance of resource efficiency and recycling in the context of a Sustainable Supply Mix of aggregates for the construction industry. Through its adoption, aggregate producers, recyclers, and governmental planners would gain confidence with LCA tools and conduct consistent and meaningful life cycle analyses of natural and recycled aggregates. © 2011 Elsevier Ltd. All rights reserved.

Differential expression of liver fluke β-tubulin isotypes at selected life cycle stages

We have shown that Fasciola hepatica expresses at least six ß-tubulins in the adult stage of its life cycle, designated F.hep-ß-tub1-6 (Ryan et al., 2008). Here we show that different complements of tubulin isotypes are expressed in different tissues and at different life cycle stages; this information may inform the search for novel anthelmintics. The predominant (as judged by quantitative PCR) isotype transcribed at the adult stage was F.hep-ß-tub1 and immunolocalisation studies revealed that this isotype occurred mainly in mature spermatozoa and vitelline follicles. Quantitative PCR indicated that changes occurred in the transcription levels of ß-tubulin isotypes at certain life cycle stages and may be of importance in the efficacy of benzimidazole-based anthelmintic drugs, but there were no significant differences between the triclabendazole (TCBZ)-susceptible Leon isolate and the TCBZ-resistant Oberon isolate in the transcription levels of each of the isotypes. When three well-characterised isolates with differing susceptibilities to TCBZ were compared, only one amino acid change resulting from a homozygous coding sequence difference (Gly269Ser) in isotype 4 was observed. However, this change was not predicted to alter the overall structure of the protein. In conclusion, these findings indicate that there is tissue-specific expression of tubulin isotypes in the liver fluke but the development of resistance to TCBZ is not associated with changes in its presumed target molecule.

Community Engagement in Ireland's Developmental Welfare State: a study of the life cycle approach

The idea that people matter in modern democracies, often referred to as 'civic engagement' is recognised at the highest international level (United Nations 2008: 9). Civic or community engagement is essential to how budgets are decided, policy is developed and public services delivered. Significantly, community engagement is crucial in developing policy for sustained economic and social development. In Ireland the idea of the Developmental Welfare State (DWS) is based on the premise that the social policy system should support citizens so as to reach their full potential. Such a system comprises three overlapping elements: tax and welfare transfer, the provision of services and activist initiatives (National Economic and Social Council, 2005: ix-xviii). Civil Society Organisations have been challenged to 'operationalise the DWS' using a 'life cycle framework' as part of Ireland's corporatist partnership model (Department of Taoiseach, 2006: 40).

Techno-Economic and Life Cycle Assessment on Lignocellulosic Biomass Thermochemical Conversion Technologies: A Review

Bioenergy derived from biomass provides a promising energy alternative and can reduce the greenhouse gas (GHG) emissions generated from fossil fuels. Biomass-based thermochemical conversion technologies have been acknowledged as apt options to convert bioresources into bioenergy; this bioenergy includes electricity, heat, and fuels/chemicals in solid, liquid, and gaseous phases. In this review, the techno-economic and life cycle assessment of these technologies (combustion, gasification, pyrolysis, liquefaction, carbonization, and co-firing) are summarized. Specific indicators (production costs in a techno-economic analysis, functional units and environmental impacts in a life cycle analysis) for different technologies were compared. Finally, gaps in research and future trends in biomass thermochemical conversion were identified. This review could be used to guide future research related to economic and environmental benefits of bioenergy.

The life cycle of Engraulis encrasicolus sensu lato in the Guadiana estuary: Ecology, Ecohydrology and Biology

Tese dout., Ecologia das populações, Universidade do Algarve, 2007

Ecology of the common octopus "Octopus vulgaris" (Cuvier, 1797) in the Atlantic Iberian coast : life cycle strategies under different oceanographic regimes

Tese de doutoramento, Biologia (Biologia Marinha e Aquacultura), Universidade de Lisboa, Faculdade de Ciências, 2015

Life cycle assessment in the supply chain: a review and case study

The paper addresses the use of Life Cycle Assessment as a tool for analysing freight transport activity in product supply chains. Published works that have assessed freight transport energy use in supply chain operations are reviewed and their results summarized. A case study of the energy use in the supply chains for jeans sold in both the UK and France is presented. The results of this case study indicate that the location from which cotton is sourced can have a major impact on the total energy used in commercial transport in the jeans supply chain. However, overall, this has a limited impact on the total energy used in producing and supplying jeans. This is because the vast majority of total energy used in the supply chain is consumed during cotton cultivation, denim production and jeans manufacture. The work also demonstrates that the amount of energy used by consumers transporting jeans to their homes by car can be greater than the total commercial transport energy used in the supply chain (per kg of jeans transported).

Comparison of allocation approaches in soybean biodiesel life cycle assessment

This work shows the influence of using different allocation approaches when modelling the inventory analysis in a soybean biodiesel life cycle assessment (LCA). Results obtained using mass, energy and economic based allocations are compared, focusing on the following aspects: normalised potential environmental impact (PEI) categories, total PEI and relative contributions to the total PEI from each life cycle stage and environmental impact category. Similar results are obtained either using economic and energy based allocations. However, different results are obtained when mass based allocation is used when compared with the other two. This study also illustrates that using different allocation approaches in biodiesel LCA may influence the final conclusions, especially in comparative assertions, emphasising the need to perform a sensitivity analysis in the LCA interpretation step.