Modeling field load tests in lateritic unsaturated soil

Many models for unsaturated soil have been developed in the last years, accompanying the development of experimental techniques to deal with such soils. The benchmark of the models for unsaturated soil can be assigned to the Barcelona Basic Model (BBM) now incorporated in some codes such as the CODE_BRIGHT. Most of those models were validated considering limited laboratory test results and not much validation is available considering real field problems. This paper presents modeling results of field plate load tests performed under known suction on a lateritic unsaturated soil. The required input data were taken from laboratory tests performed under suction control. The modeling nicely reproduces field tests allowing appreciating the influence of soil suction on the stress-settlement curve. In addition, wetting induced or collapse settlements were calculated from field tests and were nicely duplicated by the numerical analysis performed.

Diagnóstico laboratorial de Mycobacterium spp. em Botucatu e região, utilizando a técnica Reação em Cadeia da Polimerase (PCR) em material biológico e avaliação de condições associadas

Pós-graduação em Saúde Coletiva - FMB

Qualidade da água no município de Lençóis Paulista-SP e Comparação entre métodos de purificação de água

The purpose of a water treatment plant (WTP) is to provide quality water to the population in the municipality where it is operate, being directly linked to the health of the community. The efficiency of a water treatment is directly related to the quality and reliability of the methods used. The analytical results of any laboratory test or calibration is a critical process for any company today. A tool used to assist in a quality management system process is ISO/IEC 17025:2005. Given the above, the objective of this study was to evaluate the performance of an ETA located in Lençóis Paulista-SP, using the analytical results obtained by physical, chemical and microbiological determinations in the period 1-30 October 2015. Such determinations are grounded in compliance with current Ordinance 2914 the Ministry of Health and the Quality Management System, which is required for all laboratories carrying out laboratory tests for control and surveillance of water quality for human consumption

Escrubagem da bauxita de Paragominas - PA. Parte 1: influência de variáveis operacionais na desagregação da bauxita

The aim of this study was to investigate the bauxite scrubbing process on samples from Miltonia 3, a Vale operation in the State of Para, Brazil. The experimental program included the design of a standard laboratory test, from which parameters were derived for predicting the operation of a scrubber in steady state conditions. Three main variables were selected for the laboratory experimental program using the factorial design technique. These were load fraction, residence time and rotation speed. The amount of fines was determined through screening both the feed and the product of the scrubbing test. The former was considered to be a characteristic material, while the second was the dependent variable, i.e. the result of the scrubbing process. According to experiments, the load fraction was the most important variable for the scrubbing process.

Meningococcal disease in the Sorocaba region, Sao Paulo State, Brazil, 1999-2008

The objective of this study was to describe the occurrence of meningococcal disease reported to the Regional Health Department in Sorocaba, Sao Paulo State, Brazil, from 1999 to 2008. Annual incidence of the disease was two cases per 100,000 inhabitants, with an increase from 2006 to 2008. Annual incidence rates were highest in the 0 to 4 year age bracket. Case-fatality was 21.8%, higher in the 0 to 4 year age bracket (26.4%), which also showed the highest incidence of the disease, and in the over 30-year age bracket (28%). Diagnosis was confirmed by laboratory test in 71% of cases (culture in 45.3%) and by clinical and epidemiological criteria in 22%. Serological groups were B in 45.7%, C in 47.3%, W135 in 3.7%, and Y in 1.5% of the identified cases, with a predominance of B from 1999 to 2003 and C from 2004 to 2008. The most frequent phenotypes were B:4, 7:P1.19,15 and C:23:P1.14-6. The results emphasize the need for regional surveillance of trends in the disease for early detection of outbreaks and monitoring circulating strains.

Criteria for the request of preoperative tests among oral and maxillofacial surgeons

Objective: The aim of this study was to analyze the criteria employed for the requesting of preoperative tests among maxillofacial surgeons. Materials and methods: Thirty maxillofacial surgeons working in Aracaju (Brazil) received a questionnaire to fill out. The study inquired about the practice of requesting preoperative tests for healthy patients scheduled to undergo elective surgery. Results: Most of the surgeons interviewed requested tests that are not recommended for the case in question. The highest frequency of requests was a complete blood count, coagulation test, blood glucose test and chest radiograph. Conclusion: The absence of strict rules for the requesting of preoperative tests causes uncertainty and a lack of criteria regarding pre-surgical conduct. It was not possible to clearly define the criteria used by surgeons for requesting such tests, as the clinical characteristics of the hypothetical case presented suggest a smaller number of tests. (C) 2011 European Association for Cranio-Maxillo-Facial Surgery.

An ecological economic interpretation of the Jevons effect

This article develops an ecological economic interpretation of the Jevons effect. Moreover, it is argued that under the neoclassical paradigm there are no elements with which to foresee the long-term existence of this phenomenon. The objective of these arguments is to demonstrate that the Jevons effect can be used to compare the ability of neoclassical and ecological economics describing the social appropriation of nature. This is elaborated in two steps. First, we show the importance of the thesis that the economy cannot be cut off from the biophysical materiality of what is produced to give consistency to the so-called Khazzoom-Brookes postulate. It is made clear that this supposition is exogenous to the neoclassical paradigm. Second, the supposition of the biophysical materiality of what is produced is utilized to make an ecological economic interpretation of the Jevons effect. Afterwards, a comparison is made between the neoclassical and the ecological economic perspectives. This comparison leads to the following conclusions: (i) the persistent presence of the Jevons effect in the long run is an anomaly in the neoclassical paradigm; (ii) the observation of the non-existence of the Jevons effect is a refutation of the supposition that economic growth and biophysical materiality are not separable, a central thesis defended by ecological economists. This situation makes possible to use the Jevons effect as a 'laboratory test' to compare the ability of neoclassical and ecological economic paradigms to describe the social appropriation of nature. (C) 20111 Elsevier B.V. All rights reserved.

Safety factors in sheet pile wall design: considerations by using traditional methods and FEM analysis

The purpose of the work is: define and calculate a factor of collapse related to traditional method to design sheet pile walls. Furthermore, we tried to find the parameters that most influence a finite element model representative of this problem. The text is structured in this way: from chapter 1 to 5, we analyzed a series of arguments which are usefull to understanding the problem, while the considerations mainly related to the purpose of the text are reported in the chapters from 6 to 10. In the first part of the document the following arguments are shown: what is a sheet pile wall, what are the codes to be followed for the design of these structures and what they say, how can be formulated a mathematical model of the soil, some fundamentals of finite element analysis, and finally, what are the traditional methods that support the design of sheet pile walls. In the chapter 6 we performed a parametric analysis, giving an answer to the second part of the purpose of the work. Comparing the results from a laboratory test for a cantilever sheet pile wall in a sandy soil, with those provided by a finite element model of the same problem, we concluded that:in modelling a sandy soil we should pay attention to the value of cohesion that we insert in the model (some programs, like Abaqus, don’t accept a null value for this parameter), friction angle and elastic modulus of the soil, they influence significantly the behavior of the system (structure-soil), others parameters, like the dilatancy angle or the Poisson’s ratio, they don’t seem influence it. The logical path that we followed in the second part of the text is reported here. We analyzed two different structures, the first is able to support an excavation of 4 m, while the second an excavation of 7 m. Both structures are first designed by using the traditional method, then these structures are implemented in a finite element program (Abaqus), and they are pushed to collapse by decreasing the friction angle of the soil. The factor of collapse is the ratio between tangents of the initial friction angle and of the friction angle at collapse. At the end, we performed a more detailed analysis of the first structure, observing that, the value of the factor of collapse is influenced by a wide range of parameters including: the value of the coefficients assumed in the traditional method and by the relative stiffness of the structure-soil system. In the majority of cases, we found that the value of the factor of collapse is between and 1.25 and 2. With some considerations, reported in the text, we can compare the values so far found, with the value of the safety factor proposed by the code (linked to the friction angle of the soil).

Psychobiological correlates of allostatic load

Introduction: The term Clinimetric was introduced by Feinstein in 1982, who first noticed that despite all the improvements in the assessment methods, a number of clinical phenomena were still unconsidered during the evaluation process. Yet today clinical phenomena, such as stress, relevant in diseases progression and course, are not completely evaluated. Only recently, according to the clinimetric approach, Fava and colleagues have introduced specific criteria for evaluating the allostatic overload in clinical setting. Methods: Participants were 240 blood donors recruited from May 2007 to December 2009 in 4 different blood Centers (AVIS) in Italy. Blood samples from each participant were collected for laboratory test the same day the self-rating instruments were administered (Psychosocial Index, Symptom Questionnaire, Psychological well-being scales, Temperament and Character inventory, Self-Report Altruism scale). The study explore different aspects describing sample characteristics and correlates of stress in the total sample (part I), new selection criteria applied to existing instruments to identify individuals reporting allostatic load (part II), and differences on biological correlates between subjects with vs without AL. Results: Significant differences according to gender and past illnesses have been found in different dimensions of well-being and distress. Further, distress was explained for more than 60% by 4 main factors such as anxiety, somatic symptoms, environmental mastery and persistence. According to the new criteria, 98 donors reported AL. Allostatic load individuals reported to engage in less altruistic behaviours. Also they differ in personality traits and characters from controls. In the last part, results showed significant differences among donors according to allostatic load on diverse biological parameters (RBC, MCV, immune essay). Conclusion: This study presents obvious limitations due to its preliminary nature. Further research are need to confirm that these new criteria may lead to identify high risk individuals reporting not only stressful situations but also vulnerabilities.

Comportamento tribologico di materiali per componenti di interesse industriale: Failure analysis e prove tribologiche in laboratorio

L’attività di ricerca della presente tesi di dottorato ha riguardato sistemi tribologici complessi di interesse industriale per i quali sono stati individuati, mediante failure analysis, i meccanismi di usura dominanti. Per ciascuno di essi sono state studiate soluzioni migliorative sulla base di prove tribologiche di laboratorio. Nella realizzazione di maglie per macchine movimentazione terra sono ampiamente utilizzati i tradizionali acciai da bonifica. La possibilità di utilizzare i nuovi microlegati a medio tenore di carbonio, consentirebbe una notevole semplificazione del ciclo produttivo e benefici in termini di costi. Una parte della tesi ha riguardato lo studio del comportamento tribologico di tali acciai. E’ stato anche affrontato lo studio tribologico di motori idraulici, con l’obiettivo di riuscire a migliorarne la resistenza ad usura e quindi la vita utile. Sono state eseguite prove a banco, per valutare i principali meccanismi di usura, e prove di laboratorio atte a riprodurre le reali condizioni di utilizzo, valutando tecniche di modificazione superficiale che fossero in grado di ridurre l’usura dei componenti. Sono state analizzate diverse tipologie di rivestimenti Thermal Spray in termini di modalità di deposizione (AFS-APS) e di leghe metalliche depositate (Ni,Mo,Cu/Al). Si sono infine caratterizzati contatti tribologici nel settore del packaging, dove l’utilizzo di acciai inox austenitici è in alcuni casi obbligatorio. L’acciaio inossidabile AISI 316L è ampiamente utilizzato in applicazioni in cui siano richieste elevate resistenze alla corrosione, tuttavia la bassa resistenza all’usura, ne limitano l’impiego in campo tribologico. In tale ambito, è stata analizzata una problematica tribologica relativa a macchine automatiche per il dosaggio di polveri farmaceutiche. Sono state studiate soluzioni alternative che hanno previsto sia la completa sostituzione dei materiali della coppia tribologica, sia l’individuazione di tecniche di modificazione superficiale innovative quali la cementazione a bassa temperatura anche seguita dalla deposizione di un rivestimento di carbonio amorfo idrogenato a-C:H

Konzept eines aktiven Pulverinhalators

In dieser Arbeit wird das Konzept eines aktiven Pulverinhalators entwickelt. Im Gegensatz zu einem passiven Pulverinhalator ist bei solch einem Gerät die Abgabe und Dispergierung der Arzneistoffformulierung nicht von einem Inhalationsmanöver abhängig, welches von Patient zu Patient variiert. Solch ein System würde folglich die Zuverlässigkeit und Effizienz der inhalativen Therapie verbessern. Mögliche Anwendungen für einen aktiven Pulverinhalator wären vor allem Indikationen, die die Abgabe hoher Dosen erfordern, wie z.B. in der Therapie mit Antibiotika.rnIn einem Designprozess, der alle aus Kundenwünschen ermittelten Konstruktionsanforderungen sammelt und verschiedene Lösungsansätze vergleicht, wird ein mit Treibgas betriebener atemzugsausgelöster, Mehrfach-Dosis Pulverinhalator als aussichtsreichstes Konzept ermittelt. Dieses Konzept wird in Form von eigens konstruierten Labor-Test-Rigs entwickelt und vor allem hinsichtlich Höhe der Dosierung, Dosiergenauigkeit, und Flussratenabhängigkeit evaluiert. In der Spitze können über 16 mg lungengängiger Dosis erreicht werden, bei im Vergleich zu dem eingesetzten passiven Inhalator mindestens nur halb so großer Streuung. Bei niedrigen Flussraten können immer noch bis zu 80 % der erzielten inhalierbaren Dosis von hohen Flussraten erreicht werden und damit die Ergebnisse des passiven Inhalators deutlich übertreffen.rnTeil der Aufgabe war es, dieses treibgasbetriebene Labor-Test-Rig so zu entwickeln, dass es implementierbar in einen atemzugsausgelösten Mehrfachdosis-Pulverinhalator ist. Dieser treibgasbetriebene, atemzugsausgelöste Mehrfachdosis-Pulverinhalator würde die Kundenwünsche und Konstruktionsanforderungen in sehr hohen Maße erfüllen, so dass hier die Möglichkeit besteht einen Inhalator mit sehr hohem Grad an Patienten-Compliance zu verwirklichen. Durch die Verwendung und Neukombination bereits etablierter Technologien und einen akzeptablen Stückkostenpreis besteht die Möglichkeit den Inhalator tatsächlich zu realisieren und zu vermarkten.

Global Estimates of the Prevalence and Incidence of Four Curable Sexually Transmitted Infections in 2012 Based on Systematic Review and Global Reporting.

BACKGROUND Quantifying sexually transmitted infection (STI) prevalence and incidence is important for planning interventions and advocating for resources. The World Health Organization (WHO) periodically estimates global and regional prevalence and incidence of four curable STIs: chlamydia, gonorrhoea, trichomoniasis and syphilis. METHODS AND FINDINGS WHO's 2012 estimates were based upon literature reviews of prevalence data from 2005 through 2012 among general populations for genitourinary infection with chlamydia, gonorrhoea, and trichomoniasis, and nationally reported data on syphilis seroprevalence among antenatal care attendees. Data were standardized for laboratory test type, geography, age, and high risk subpopulations, and combined using a Bayesian meta-analytic approach. Regional incidence estimates were generated from prevalence estimates by adjusting for average duration of infection. In 2012, among women aged 15-49 years, the estimated global prevalence of chlamydia was 4.2% (95% uncertainty interval (UI): 3.7-4.7%), gonorrhoea 0.8% (0.6-1.0%), trichomoniasis 5.0% (4.0-6.4%), and syphilis 0.5% (0.4-0.6%); among men, estimated chlamydia prevalence was 2.7% (2.0-3.6%), gonorrhoea 0.6% (0.4-0.9%), trichomoniasis 0.6% (0.4-0.8%), and syphilis 0.48% (0.3-0.7%). These figures correspond to an estimated 131 million new cases of chlamydia (100-166 million), 78 million of gonorrhoea (53-110 million), 143 million of trichomoniasis (98-202 million), and 6 million of syphilis (4-8 million). Prevalence and incidence estimates varied by region and sex. CONCLUSIONS Estimates of the global prevalence and incidence of chlamydia, gonorrhoea, trichomoniasis, and syphilis in adult women and men remain high, with nearly one million new infections with curable STI each day. The estimates highlight the urgent need for the public health community to ensure that well-recognized effective interventions for STI prevention, screening, diagnosis, and treatment are made more widely available. Improved estimation methods are needed to allow use of more varied data and generation of estimates at the national level.

Biomarker-guided personalised emergency medicine for all - hope for another hype?

Polymorbid patients, diverse diagnostic and therapeutic options, more complex hospital structures, financial incentives, benchmarking, as well as perceptional and societal changes put pressure on medical doctors, specifically if medical errors surface. This is particularly true for the emergency department setting, where patients face delayed or erroneous initial diagnostic or therapeutic measures and costly hospital stays due to sub-optimal triage. A "biomarker" is any laboratory tool with the potential better to detect and characterise diseases, to simplify complex clinical algorithms and to improve clinical problem solving in routine care. They must be embedded in clinical algorithms to complement and not replace basic medical skills. Unselected ordering of laboratory tests and shortcomings in test performance and interpretation contribute to diagnostic errors. Test results may be ambiguous with false positive or false negative results and generate unnecessary harm and costs. Laboratory tests should only be ordered, if results have clinical consequences. In studies, we must move beyond the observational reporting and meta-analysing of diagnostic accuracies for biomarkers. Instead, specific cut-off ranges should be proposed and intervention studies conducted to prove outcome relevant impacts on patient care. The focus of this review is to exemplify the appropriate use of selected laboratory tests in the emergency setting for which randomised-controlled intervention studies have proven clinical benefit. Herein, we focus on initial patient triage and allocation of treatment opportunities in patients with cardiorespiratory diseases in the emergency department. The following five biomarkers will be discussed: proadrenomedullin for prognostic triage assessment and site-of-care decisions, cardiac troponin for acute myocardial infarction, natriuretic peptides for acute heart failure, D-dimers for venous thromboembolism, C-reactive protein as a marker of inflammation, and procalcitonin for antibiotic stewardship in infections of the respiratory tract and sepsis. For these markers we provide an overview on physiopathology, historical evolution of evidence, strengths and limitations for a rational implementation into clinical algorithms. We critically discuss results from key intervention trials that led to their use in clinical routine and potential future indications. The rational for the use of all these biomarkers, first, tackle diagnostic ambiguity and consecutive defensive medicine, second, delayed and sub-optimal therapeutic decisions, and third, prognostic uncertainty with misguided triage and site-of-care decisions all contributing to the waste of our limited health care resources. A multifaceted approach for a more targeted management of medical patients from emergency admission to discharge including biomarkers, will translate into better resource use, shorter length of hospital stay, reduced overall costs, improved patients satisfaction and outcomes in terms of mortality and re-hospitalisation. Hopefully, the concepts outlined in this review will help the reader to improve their diagnostic skills and become more parsimonious laboratory test requesters.

The growing spectrum of antibody-associated inflammatory brain diseases in children.

OBJECTIVE To describe the clinical spectrum, diagnostic evaluation, current management, and neurologic outcome of pediatric antibody-associated inflammatory brain diseases (AB-associated IBrainD). METHODS We performed a single-center retrospective cohort study of consecutive patients aged ≤18 years diagnosed with an AB-associated IBrainD at The Hospital for Sick Children, Toronto, Ontario, Canada, between January 2005 and June 2013. Standardized clinical data, laboratory test results, neuroimaging features, and treatment regimens were captured. RESULTS Of 169 children (93 female, 55%) diagnosed with an IBrainD, 16 (10%) had an AB-associated IBrainD. Median age at presentation was 13.3 years (range 3.1-17.9); 11 (69%) were female. Nine patients (56%) had anti-NMDA receptor encephalitis, 4 (25%) had aquaporin-4 autoimmunity, 2 (13%) had Hashimoto encephalitis, and 1 (6%) had anti-glutamic acid decarboxylase 65 (GAD65) encephalitis. The key presenting features in children with anti-NMDA receptor encephalitis, Hashimoto encephalopathy, and anti-GAD65 encephalitis included encephalopathy, behavioral symptoms, and seizures; patients with aquaporin-4 autoimmunity showed characteristic focal neurologic deficits. Six patients (38%) required intensive care unit admission at presentation. Median time from symptom onset to diagnosis was 55 days (range 6-358). All but 1 patient received immunosuppressive therapy. One child with anti-NMDA receptor encephalitis died due to multiorgan failure. At last follow-up, after a median follow-up time of 1.7 years (range 0.8-3.7), 27% of the children had function-limiting neurologic sequelae. CONCLUSIONS Children with AB-associated IBrainD represent an increasing subgroup among IBrainD; 1 in 4 children has function-limiting residual neurologic deficits. Awareness of the different clinical patterns is important in order to facilitate timely diagnosis and initiate immunosuppressive treatment.

Researching in ancient engineering physical and chemical analysis in hidraulic roman mortars

Around ten years ago investigation of technical and material construction in Ancient Roma has advanced in favour to obtain positive results. This process has been directed to obtaining some dates based in chemical composition, also action and reaction of materials against meteorological assaults or post depositional displacements. Plenty of these dates should be interpreted as a result of deterioration and damage in concrete material made in one landscape with some kind of meteorological characteristics. Concrete mixture like calcium and gypsum mortars should be analysed in laboratory test programs, and not only with descriptions based in reference books of Strabo, Pliny the Elder or Vitruvius. Roman manufacture was determined by weather condition, landscape, natural resources and of course, economic situation of the owner. In any case we must research the work in every facts of construction. On the one hand, thanks to chemical techniques like X-ray diffraction and Optical microscopy, we could know the granular disposition of mixture. On the other hand if we develop physical and mechanical techniques like compressive strength, capillary absorption on contact or water behaviour, we could know the reactions in binder and aggregates against weather effects. However we must be capable of interpret these results. Last year many analyses developed in archaeological sites in Spain has contributed to obtain different point of view, so has provide new dates to manage one method to continue the investigation of roman mortars. If we developed chemical and physical analysis in roman mortars at the same time, and we are capable to interpret the construction and the resources used, we achieve to understand the process of construction, the date and also the way of restoration in future.