Guidelines for Removal of Traffic Control Devices in Rural Areas, TR-527, 2005

It is commonly regarded that the overuse of traffic control devices desensitizes drivers and leads to disrespect, especially for low-volume secondary roads with limited enforcement. The maintenance of traffic signs is also a tort liability concern, exacerbated by unnecessary signs. The Federal Highway Administration’s (FHWA) Manual on Uniform Traffic Control Devices (MUTCD) and the Institute of Transportation Engineer’s (ITE) Traffic Control Devices Handbook provide guidance for the implementation of STOP signs based on expected compliance with right-of-way rules, provision of through traffic flow, context (proximity to other controlled intersections), speed, sight distance, and crash history. The approach(es) to stop is left to engineering judgment and is usually dependent on traffic volume or functional class/continuity of system. Although presently being considered by the National Committee on Traffic Control Devices, traffic volume itself is not given as a criterion for implementation in the MUTCD. STOP signs have been installed at many locations for various reasons which no longer (or perhaps never) met engineering needs. If in fact the presence of STOP signs does not increase safety, removal should be considered. To date, however, no guidance exists for the removal of STOP signs at two-way stop-controlled intersections. The scope of this research is ultra-low-volume (< 150 daily entering vehicles) unpaved intersections in rural agricultural areas of Iowa, where each of the 99 counties may have as many as 300 or more STOP sign pairs. Overall safety performance is examined as a function of a county excessive use factor, developed specifically for this study and based on various volume ranges and terrain as a proxy for sight distance. Four conclusions are supported: (1) there is no statistical difference in the safety performance of ultra-low-volume stop-controlled and uncontrolled intersections for all drivers or for younger and older drivers (although interestingly, older drivers are underrepresented at both types of intersections); (2) compliance with stop control (as indicated by crash performance) does not appear to be affected by the use or excessive use of STOP signs, even when adjusted for volume and a sight distance proxy; (3) crash performance does not appear to be improved by the liberal use of stop control; (4) safety performance of uncontrolled intersections appears to decline relative to stop-controlled intersections above about 150 daily entering vehicles. Subject to adequate sight distance, traffic professionals may wish to consider removal of control below this threshold. The report concludes with a section on methods and legal considerations for safe removal of stop control.

Timber Abutment Piling and Back Wall Rehabilitation and Repair, TR-616, 2012

Based on previous National Bridge Inventory data, the state of Iowa has nearly 20,000 bridges on low-volume roads (LVRs). Thus, these bridges are the responsibility of the county engineers. Of the bridges on the county roads, 24 percent are structurally deficient and 5 percent are functionally obsolete. A large number of the older bridges on the LVRs are built on timber piling with timber back walls. In many cases, as timber abutments and piers age, the piling and back wall planks deteriorate at a rate faster than the bridge superstructure. As a result, a large percentage of the structurally deficient bridges on LVRs are classified as such because of the condition of the timber substructure elements. As funds for replacing bridges decline and construction costs increase, effective rehabilitation and strengthening techniques for extending the life of the timber substructures in bridges with structurally sound superstructures has become even more important. Several counties have implemented various techniques to strengthen/repair damaged piling, however, there is minimal data documenting the effectiveness of these techniques. There are numerous instances where cracked and failed pilings have been repaired. However, there are no experimental data on the effectiveness of the repairs or on the percentage of load transferred from the superstructure to the sound pile below. To address the research needs, a review and evaluation of current maintenance and rehabilitation methods was completed. Additionally, a nationwide survey was conducted to learn the methods used beyond Iowa. Field investigation and live-load testing of bridges with certain Iowa methods was completed. Lastly, laboratory testing of new strengthening and rehabilitation methods was performed.

Asset Management Program Enhancement Plan: Baseline Assessment Phases I and II, 2015

This project resulted in the development of a framework for making asset management decisions on low-volume bridges. The research focused on low-volume bridges located in the agricultural counties of Iowa because recent research has shown that these counties have the greatest percentage of structurally deficient bridges in the nation. Many of the same counties also have the highest crop yields in the state, creating a situation where detours caused by deficient bridges on farm-to-market roads increase the cost to transport the crops. Thus, the research proposed the use of social return on investment (SROI), a tool used by international institutions such as the World Bank, as an asset management metric to gauge to the socioeconomic impact of structurally deficient bridges on the state in an effort to provide quantified justification to fund improvements on low-volume assets such as these rural bridges. The study found that combining SROI with current asset management metrics like average daily traffic (ADT) made it possible to prioritize the bridges in such a way that the limited resources available are allocated in a manner that promotes a more equitable distribution and that directly benefits the user, in this case Iowa farmers. The result is a system that more closely aligns itself with the spirit of MAP-21, in that infrastructure investments are used to facilitate economic growth for Iowa’s agricultural economy.

Experimental and Numerical Analysis of Different Volutes in a Centrifugal Compressor

In a centrifugal compressor the flow around the diffuser is collected and led to the pipe system by a spiral-shaped volute. In this study a single-stage centrifugal compressor with three different volutes is investigated. The compressorwas first equipped with the original volute, the cross-section of which was a combination of a rectangle and semi-circle. Next a new volute with a fully circular cross-section was designed and manufactured. Finally, the circular volute wasmodified by rounding the tongue and smoothing the tongue area. The overall performance of the compressor as well as the static pressure distribution after the impeller and on the volute surface were measured. The flow entering the volute was measured using a three-hole Cobra-probe, and flow visualisations were carriedout in the exit cone of the volute. In addition, the radial force acting on theimpeller was measured using magnetic bearings. The complete compressor with thecircular volute (inlet pipe, full impeller, diffuser, volute and outlet pipe) was also modelled using computational fluid dynamics (CFD). A fully 3-D viscous flow was solved using a Navier-Stokes solver, Finflo, developed at Helsinki University of Technology. Chien's k-e model was used to take account of the turbulence. The differences observed in the performance of the different volutes were quite small. The biggest differences were at low speeds and high volume flows,i.e. when the flow entered the volute most radially. In this operating regime the efficiency of the compressor with the modified circular volute was about two percentage points higher than with the other volutes. Also, according to the Cobra-probe measurements and flow visualisations, the modified circular volute performed better than the other volutes in this operating area. The circumferential static pressure distribution in the volute showed increases at low flow, constant distribution at the design flow and decrease at high flow. The non-uniform static pressure distribution of the volute was transmitted backwards across the vaneless diffuser and observed at the impeller exit. At low volume flow a strong two-wave pattern developed into the static pressure distribution at the impeller exit due to the response of the impeller to the non-uniformity of pressure. The radial force of the impeller was the greatest at the choke limit, the smallest atthe design flow, and moderate at low flow. At low flow the force increase was quite mild, whereas the increase at high flow was rapid. Thus, the non-uniformityof pressure and the force related to it are strong especially at high flow. Theforce caused by the modified circular volute was weaker at choke and more symmetric as a function of the volume flow than the force caused by the other volutes.

Harmonising the Modular Product Range

Työn tavoitteena on analysoida KONEen hissien ovituoteperheitä ja harmonisoida modulaarista ovituotevalikoimaa niin, että tulos olisi mahdollisimman suotuisa KONEelle sekä sen sidosryhmille. Harmonisointi toteutetaan, koska KONEen tuotevalikoima on erittäin laaja ja monimutkainen ja siitä syystä erittäin kallis ja vaikea hallita ja ylläpitää. Tavoitteena on selvittää myös termejä modulaarisuus ja tuotealusta olennaisen kirjallisuuden pohjalta. Nykyään yritysten täytyy kehittää tuotevalikoimaa jatkuvasti. Yrityksen koko tuotevalikoiman varioituvuus tulisi kuitenkin pitää järkevissä rajoissa. Moduuleita ja tuotealustoja pitäisi käyttää jakamaan tuotteiden avainelementtejä ja lisäämään varioituvuutta helposti hallittavalla tavalla. Kannattamattomat ja matalavolyymiset tuotteet kuluttavat yrityksen niukkoja resursseja. Tällaiset tuotteet tulisi poistaa tuotevalikoimasta, mutta ei ilman harkintaa. Kannattama-tonkin tuote voi olla erittäin arvokas asiakkaalle ja tällaisen tuotteen hylkääminen voi olla yritykselle pitkällä tähtäimellä erittäin kohtalokasta. Työn tuloksena oli harmonisointiehdotus KONEen AMD-oville ja selvitys harmonisoinnin vaikutuksista. Harmonisointi KONEella päätettiin toteuttaa siten, että matalavolyymiset tuotteet siirrettiin erikoistuotteiden valikoimaan. Myös kustannusanalyysi tukee harmonisointipäätöstä laskentajärjestelmän puutteista huolimatta.

Lajinvaihtokustannusten vaikutus tuotevalikoiman kannattavuuteen

Asiakkaat vaativat yhä suurempaa tuotannon joustavuutta ja lyhyitä toimitusaikoja paperiteollisuudelta. Samanaikaisesti kiristyvä kilpailu ajaa yritykset tavoittelemaan parempaa kannattavuutta kasvattamalla tuotevalikoimaa. Edellä mainitut tekijät lisäävät lajinvaihtojen määrää ja aiheuttavat kustannuksia. Diplomityön pääasiallisena tavoitteena on selvittää kohdeyrityksen paperikoneen lajinvaihdoista aiheutuvat kustannukset ja niiden vaikutus tuotevalikoiman kannattavuuteen. Toisena merkittävänä tavoitteena voidaan mainita lajinvaihtokustannusten simulointimallin rakentaminen, jota voidaan käyttää apuna tuotannonsuunnittelussa. Lisäksi saatujen tutkimustulosten perusteella pyritään löytämään keinoja kannattavuuden parantamiseksi. Paperikoneella tehdyn seurannan avulla selvitettiin eri tyyppisten lajinvaihtojen aiheuttamat tuotannonmenetykset. Tämän perusteella laskettiin niiden kustannusvaikutukset. Tarkastelua laajennettiin kahden toteutuneen syklin avulla syklitasolle ja lopuksi tuotevalikoimatasolle. Lajinvaihtokustannukset lisääntyivät paperin laatusuureiden muutoksen kasvaessa. Kalanterointimuutokset osoittautuivat kalleimmiksi ja niiden määrä tulisi minimoida. Kustannukset eivät osoittautuneet syklitasolla kovin suuriksi, mutta laji- ja ajokohtaisesti ne ovat merkittäviä erityisesti pienivolyymisilla tuotteilla. Niiden ajofrekvenssin harventaminen vähentäisi kustannuksia ja parantaisi kannattavuutta. Lajinvaihto-kustannukset tulisi jatkossa huomioida tuotekustannuslaskennassa.

Does Rigidity of Prices Hide Collusion?

Cartel detection is one of the most basic and most complicated tasks of competition authorities. In recent years, however, variance filters have provided a fairly simple tool for rejecting the existence of price-fixing, with the added advantage that the methodology requires only a low volume of data. In this paper we analyze two aspects of variance filters: 1- the relationship established between market structure and price rigidity, and 2- the use of different benchmarks for implementing the filters. This paper addresses these two issues by applying a variance filter to a gasoline retail market characterized by a set of unique features. Our results confirm the positive relationship between monopolies and price rigidity, and the variance filter's ability to detect non-competitive behavior when an appropriate benchmark is used. Our findings should serve to promote the implementation of this methodology among competition authorities, albeit in the awareness that a more exhaustive complementary analysis is required.

Otimização e validação de método empregando quechers modificado e lc-esi-ms/ms para determinação de agrotóxicos em cebola

An evaluation of the pesticides extraction from onion using a modern sample preparation method (QuEChERS) and determination by liquid chromatography tandem mass spectrometry was carried out. All the calibration curves showed r>0.99. The recoveries ranged between 61.8 and 120.0% with relative standard deviation lower than 20% for all compounds. Due to the occurrence of matrix effect, the quantification was performed using matrix-matched calibration. The limits of quantification of the method were between 0.0005 and 0.05 mg kg-1. The method shows the advantages of not require the clean-up step and consume low volume of organic solvents, decreasing time, costs and residues.

Genesis and Emplacement of Carbonatites and Lamprophyres in the Svecofennian Domain

A small carbonatite dyke swarm has been identified at Naantali, southwest Finland. Several swarms of shoshonitic lamprophyres are also known along the Archean-Proterozoic boundary in eastern Finland and northwest Russia. These intrusions, along with the carbonatite intrusion at Halpanen, eastern Finland, represent a stage of widespread low-volume mantle-sourced alkaline magmatism in the Svecofennian Domain. Using trace element and isotope geochemistry coupled with precise geochronology from these rocks, a model is presented for the Proterozoic metasomatic evolution of the Fennoscandian subcontinental lithospheric mantle. At ~2.2-2.06 Ga, increased biological production in shallow seas linked to continental rifting, resulted in increased burial rates of organic carbon. Subduction between ~1.93-1.88 Ga returned organic carbon-enriched sediments of mixed Archean and Proterozoic provenance to the mantle. Dehydration reactions supplied water to the mantle wedge, driving arc volcanism, while mica, amphibole and carbonate were brought deeper into the mantle with the subducting slab. The cold subducted slab was heated conductively from the surrounding warm mantle, while pressures continued to gradually increase as a result of crustal thickening. The sediments began to melt in a two stage process, first producing a hydrous alkaline silicate melt, which infiltrated the mantle wedge and crystallised as metasomatic veins. At higher temperatures, carbonatite melt was produced, which preferentially infiltrated the pre-existing metasomatic vein network. At the onset of post-collisional extension, deep fault structures formed, providing conduits for mantle melts to reach the upper crust. Low-volume partial melting of the enriched mantle at depths of at least 110 km led to the formation of first carbonatitic magma and subsequently lamprophyric magma. Carbonatite was emplaced in the upper crust at Naantali at 1795.7 ± 6.8 Ma; lamprophyres along the Archean-Proterozoic boundary were emplaced between 1790.1 ± 3.3 Ma and 1781 ± 20 Ma.

Modulaarisen tuotteen mallivalikoiman ja tuoterakenteen keventäminen

Työn päätavoitteena on analysoida Konecranesin nosturiohjaamoperheitä ja tehdä analyysin pohjalta ehdotuksia liiketoimintayksiköiden käyttämän ohjaamovalikoiman ja modulaarisen tuoterakenteen keventämisestä. Ohjaamovalikoiman ja ohjaamojen tuoterakenteen keventämiselle on tarvetta koska laajan ohjaamovalikoiman ja monimutkaisen tuoterakenteen myötä tuotehallinta on vaikeutunut hankaloittaen myyntiprosessia ja lisäten samalla myös tuotteen tilaus-toimitusprosessin virhealttiutta ja kustannuksia. Suuren valikoiman ja monimutkaisen tuoterakenteen takia tuotekonfiguroinnissa tarvittavia teknisiä lausekkeita ei voida myöskään soveltaa kaikkiin ohjaamomalleihin ja ne ovatkin sen takia jääneet vajaakäyttöön Työn tuloksena ehdotetaan elinkaarensa päähän tulleiden ja/tai duplikaateiksi luokiteltavien mallien poistamista valikoimasta ja vain vähäistä myyntipotentiaalia omaavien tuotteiden siirtämistä erikoistuotteiden valikoimaan tarjottavaksi suunnittelua vaativina, projektiluonteisina tuotteina. Työn tuloksena ehdotetaan myös ohjaamoperheiden tuoterakenteen yhtenäistämistä ja tuotealustojen vari-oituvuuden vähentämisestä siirtämällä pienen myyntipotentiaalin omaavia alustoja projektituotteiksi.

Postprandial symptoms in dysmotility-like functional dyspepsia are not related to disturbances of gastric myoelectrical activity

Gastric dysrhythmias, such as tachy- or bradygastria, have been reported in patients with functional dyspepsia (FD), but their role in symptom production is uncertain. It is also not known whether gastric dysrhythmias in these patients can be elicited by physiological gastric distension with a meal. We investigated the relationships between symptoms after ingestion of different volumes of water following a test meal and gastric dysrhythmias in FD patients. Fourteen patients with dysmotility-like FD and 13 healthy volunteers underwent paired electrogastrography (EGG) studies. Fasted subjects ingested 150 ml of yoghurt with either 150 ml (low volume) or 300 ml (high volume) water in random order. Fasting and fed EGGs with monitoring of symptoms were performed in both studies. Ten FD patients (71.4%) reported upper abdominal discomfort and bloating after the low volume meal, but only one (7.1%) presented an abnormal EGG (dominant frequency in the 2-4-cpm range: 58%). Following the high volume meal, 7 patients (50%) had symptoms, but none had EGG abnormalities. No significant differences were found between FD patients and controls for any of the EGG variables, in any test. In FD patients with postprandial symptoms, the percentage of the EGG dominant frequency in the normal range (median, 84.6%; range, 76.0-100.0%) was similar (P > 0.20) to that in those without symptoms (88.5%; 75.0-100.0%). We conclude that disturbances of gastric myoelectrical activity are unlikely to play a role in the origin of postprandial upper abdominal discomfort and bloating in dysmotility-like FD.

The acute effects of strength, endurance and concurrent exercises on the Akt/mTOR/p70S6K1 and AMPK signaling pathway responses in rat skeletal muscle

The activation of competing intracellular pathways has been proposed to explain the reduced training adaptations after concurrent strength and endurance exercises (CE). The present study investigated the acute effects of CE, strength exercises (SE), and endurance exercises (EE) on phosphorylated/total ratios of selected AMPK and Akt/mTOR/p70S6K1 pathway proteins in rats. Six animals per exercise group were killed immediately (0 h) and 2 h after each exercise mode. In addition, 6 animals in a non-exercised condition (NE) were killed on the same day and under the same conditions. The levels of AMPK, phospho-Thr172AMPK (p-AMPK), Akt, phospho-Ser473Akt (p-Akt), p70S6K1, phospho-Thr389-p70S6K1(p-p70S6K1), mTOR, phospho-Ser2448mTOR (p-mTOR), and phospho-Thr1462-TSC2 (p-TSC2) expression were evaluated by immunoblotting in total plantaris muscle extracts. The only significant difference detected was an increase (i.e., 87%) in Akt phosphorylated/total ratio in the CE group 2 h after exercise compared to the NE group (P = 0.002). There were no changes in AMPK, TSC2, mTOR, or p70S6K1 ratios when the exercise modes were compared to the NE condition (P ≥ 0.05). In conclusion, our data suggest that low-intensity and low-volume CE might not blunt the training-induced adaptations, since it did not activate competing intracellular pathways in an acute bout of strength and endurance exercises in rat skeletal muscle.

Development of selected electro-active polymer-ceramic nanocomposites as pyroelectric thermal/infrared detector materials

The present work emphasises on the synthesis and characterization of electro-active polymer-ceramic nanocomposites which can be used for pyroelectric thermal/infrared detection applications. Two sets of samples belong to polymer-microcrystalline composites have also been investigated in the work. The polymers used in the work have been commercially available ones, but the nanoceramics have been synthesized following simple chemical routes and aqueous organic gel routes. After characterizing the nanoceramics for their structure by powder XRD, they have been dispersed in liquid polymer and sonicated for uniform dispersion. The viscous mixture so formed was cast in the form of films for experimentation. Samples with volume fraction of the ceramic phase varied from 0 to 0.25 have been prepared. Solution growth was followed to prepare microcrystalline samples for the polymer-microcrystalline composites. The physical properties that determine the pyroelectric sensitivity of a material are dielectric constant, dielectric loss, pyroelectric coefficient, thermal conductivity and specific heat capacity. These parameters have been determined for all the samples and compositions reported in this work.The pyroelectric figures of merit for all the samples were determined. The pyroelectric figures of merit that determine the pyroelectric sensitivity of a material are current sensitivity, voltage responsivity and detectivity. All these have been determined for each set of samples and reported in the thesis. In order to assess the flexibility and mouldability of the composites we have measured the Shore hardness of each of the composites by indentation technique and compared with the pyroelectric figures of merit. Some important factors considered during the material fabrication stages were maximum flexibility and maximum figures of merit for pyroelectric thermal/IR detection applications. In order to achieve these goals, all the samples are synthesized as composites of polymers and nano/microcrystalline particles and are prepared in the form of freestanding films. The selected polymer matrices and particle inclusions possess good pyroelectric coefficients, low thermal and dielectric properties, so that good pyroelectric figures of merit could be achieved. The salient features of the work include the particle size of the selected ceramic materials. Since they are in nanometer size it was possible to achieve high flexibility and moldability with high figures of merit for even low volume fractions of inclusions of the prepared nanocrystalline composites. In the case of microcrystalline TGS and DTGS, their composites in PU matrix protect them from fragility and humidity susceptibility and made them for environmental friendly applications.

Development of ready-to-eat extruded fish based noodles in semi-rigid containers”

Fish and fishery products are having a unique place in global food market due to its unique taste and flavour; moreover, the presence of easily digestible proteins, lipids, vitamins and minerals make it a highly demanded food commodity.Fishery products constitute a major portion of international trade, which is a valuable source of foreign exchange to many developing countries.Several new technologies are emerging to produce various value added products from food; “extrusion technology” is one among them. Food extruder is a better choice for producing a wide variety of high value products at low volume because of its versatility. Extruded products are shelf-stable at ambient temperature. Extrusion cooking is used in the manufacture of food products such as ready-to-eat breakfast cereals, expanded snacks, pasta, fat-bread, soup and drink bases. The raw materialin the form of powder at ambient temperature is fed into extruder at a known feeding rate. The material first gets compacted and then softens and gelatinizes and/or melts to form a plasticized material, which flows downstream into extruder channel and the final quality of the end products depends on the characteristics of starch in the cereals and protein ingredient as affected by extrusion process. The advantages of extrusion process are the process is thermodynamically most efficient, high temperature short time enables destruction of bacteria and anti-nutritional factors, one step cooking process thereby minimizing wastage and destruction of fat hydrolyzing enzymes during extrusion process and enzymes associated with rancidity.

Hidrolipoclasia abdominal : variaciones técnicas y resultados antropométricos, en tres centros de medicina estética de Bogotá

Introducción: Hidrolipoclasia, es un procedimiento médico para reducir adiposidad localizada. En los últimos años ha aumentado su uso en centros de medicina estética. Pese a que es considerada segura y eficaz, no existen estudios científicos que así lo avalen. Metodología: En una corte transversal, se describieron las técnicas protocolizadas de hidrolipoclasia y las características clínicas, demográficas y resultados (medidas antropométricas), de pacientes sometidos a hidrolipoclasia, en tres centros de medicina estética (Bogota, 2008 – 2009). Se resumió la información mediante distribuciones de frecuencias, medidas de tendencia central y dispersión. Para las diferencias se utilizaron pruebas paramétricas y no paramétricas. Resultados: Se encontró diferencia estadísticamente significativa entre mediciones iniciales y finales, independientemente de: técnica y número de sesiones; la disminución de peso fue 2,35 kg, IMC: 0.95, contorno: 3.38 cms, cintura: 3.63 cms y ombligo: 4.12 cms. La diferencia en las tres últimas se mantuvo significativa hasta después de la cuarta sesión. Las mayores reducciones de contorno, cintura y ombligo se dieron con técnicas de bajo volumen, aunque sin diferencia estadísticamente significativa. En el peso si la hubo, dada por mayor reducción con técnicas de bajo volumen comparadas con las de alto volumen con lipolíticos. No hubo complicaciones únicamente efectos secundarios (Equimosis: 71,43%). Discusión: Existen diferentes técnicas de hidrolipoclasia, sin embargo no hubo diferencia estadísticamente significativa entre ellas. Los pacientes redujeron medidas antropométricas y la diferencia fue estadísticamente significativa hasta después de la cuarta sesión, con mayor reducción después de la primera sesión.