Habitat re-creation and restoration at the landscape scale: woodlands in Wales

The aim of this three year project funded by the Countryside Council for Wales (CCW) is to develop techniques firstly, to refine and update existing targets for habitat restoration and re-creation at the landscape scale and secondly, to develop a GIS-based model for the implementation of those targets at the local scale. Landscape Character Assessment (LCA) is being used to map Landscape Types across the whole of Wales as the first stage towards setting strategic habitat targets. The GIS habitat model uses data from the digital Phase I Habitat Survey for Wales to determine the suitability of individual sites for restoration to specific habitat types, including broadleaf woodland. The long-term aim is to develop a system that strengthens the character of Welsh landscapes and provides real biodiversity benefits based upon realistic targets given limited resources for habitat restoration and re-creation.

Environmental and human health impacts of growing genetically modified herbicide-tolerant sugar beet: a life-cycle assessment

There is ongoing debate concerning the possible environmental and human health impacts of growing genetically modified (GM) crops. Here, we report the results of a life-cycle assessment (LCA) comparing the environmental and human health impacts of conventional sugar beet growing regimes in the UK and Germany with those that might be expected if GM herbicide-tolerant (to glyphosate) sugar beet is commercialized. The results presented for a number of environmental and human health impact categories suggest that growing the GM herbicide-tolerant crop would be less harmful to the environment and human health than growing the conventional crop, largely due to lower emissions from herbicide manufacture, transport and field operations. Emissions contributing to negative environmental impacts, such as global warming, ozone depletion, ecotoxicity of water and acidification and nutrification of soil and water, were much lower for the herbicide-tolerant crop than for the conventional crop. Emissions contributing to summer smog, toxic particulate matter and carcinogenicity, which have negative human health impacts, were also substantially lower for the herbicide-tolerant crop. The environmental and human health impacts of growing GM crops need to be assessed on a case-by-case basis using a holistic approach. LCA is a valuable technique for helping to undertake such assessments.

An application of life-cycle assessment for environmental planning and management: the potential environmental and human health impacts of growing genetically-modified herbicide-tolerant sugar beet

Life-Cycle Assessment (LCA) was used to assess the potential environmental and human health impacts of growing genetically-modified (GM), herbicide-tolerant sugar beet in the UK and Germany compared with conventional sugar beet varieties. The GM variety results in lower potential environmental impacts on global warming, airborne nutrification, ecotoxicity (of soil and water) and watercourse enrichment, and lower potential human health impacts in terms of production of toxic particulates, summer smog, carcinogens and ozone depletion. Although the overall contribution of GM sugar beet to reducing harmful emissions to the environment would be relatively small, the potential for GM crops to reduce pollution from agriculture, including diffuse water pollution, is highlighted.

The use of life cycle assessment to compare the environmental impact of production and feeding of conventional and genetically modified maize for broiler production in Argentina

The paper presents the methods and results of a life-cycle assessment (LCA) applied to the production of maize grain from a conventional variety compared with maize grain from a variety genetically modified to be herbicide tolerant and insect protected and to contain an enhanced oil and lysine content, and its impact when fed to broiler chickens. The findings show that there are both environmental and human health benefits of growing GM maize including lower impacts on global warming, ozone depletion, freshwater ecotoxicity and human toxicity. However, when considered in terms of the use of maize as a feed input to broiler chicken production, the benefits of the GM alternative become negligible compared to the use of conventional maize.

Landscape typology in the Mediterranean context: a tool for habitat restoration

Despite the wide use of Landscape Character Assessment (LCA) as a tool for landscape planning in NW Europe, there are few examples of its application in the Mediterranean. This paper reports on the results from the development of a typology for LCA in a study area of northern Sardinia, Italy to provide a spatial framework for the analysis of current patterns of cork oak distribution and future restoration of this habitat. Landscape units were derived from a visual interpretation of map data stored within a GIS describing the physical and cultural characteristics of the study area. The units were subsequently grouped into Landscape Types according to the similarity of shared attributes using Two Way Indicator Species Analysis (TWINSPAN). The preliminary results showed that the methodology classified distinct Landscape Types but, based on field observations, there is a need for further refinement of the classification. The distribution and properties of two main cork oak habitats types was examined within the identified Landscape Types namely woodlands and wood pastures using Patch Analyst. The results show very clearly a correspondence between the distribution of cork oak pastures and cork oak woodland and landscape types. This forms the basis of the development of strategies for the maintenance, restoration and recreation of these habitat types within the study area, ultimately for the whole island of Sardinia. Future work is required to improve the landscape characterisation , particularly with respect to cultural factors, and to determine the validity of the landscape spatial framework for the analysis of cork oak distribution as part of a programme of habitat restoration and re-creation.

Effect of colonic bacterial metabolites on Caco-2 cell paracellular permeability in vitro

One common effect of tumor promoters is increased tight junction (TJ) permeability. TJs are responsible for paracellular permeability and integrity of the barrier function. Occludin is one of the main proteins responsible for TJ structure. This study tested the effects of physiological levels of phenol, ammonia, primary bile acids (cholic acid, CA, and chenodeoxycholic acid, CDCA), and secondary bile acids (lithocholic acid, LCA, and deoxycholic acid, DCA) on paracellular permeability using a Caco-2 cell model. Paracellular permeability of Caco-2 monolayers was assessed by transepithelial electrical resistance (TER) and the apical to basolateral flux of [C-14]-mannitol. Secondary, but not primary, bile acids increased permeability as reflected by significantly decreased TER and increased mannitol flux. Both phenol and ammonia also increased permeability. The primary bile acid CA significantly increased occludin expression (P < 0.05), whereas CDCA had no significant effect on occludin expression as compared to the negative control. The secondary bile acids DCA and LCA significantly increased occludin expression (P < 0.05), whereas phenol had no significant effect on the protein expression as compared to the negative control. This suggests that the increased permeability observed with LCA, DCA, phenol, and ammonia was not related to an effect on occludin expression. In conclusion, phenol, ammonia, and secondary bile acids were shown to increase paracellular permeability and reduce epithelial barrier function at doses typical of levels found in fecal samples. The results contribute to the evidence these gut microflora-generated products have tumor-promoting activity.

Model-based life cycle cost and assessment tool for sustainable building design decision

There is a growing concern in reducing greenhouse gas emissions all over the world. The U.K. has set 34% target reduction of emission before 2020 and 80% before 2050 compared to 1990 recently in Post Copenhagen Report on Climate Change. In practise, Life Cycle Cost (LCC) and Life Cycle Assessment (LCA) tools have been introduced to construction industry in order to achieve this such as. However, there is clear a disconnection between costs and environmental impacts over the life cycle of a built asset when using these two tools. Besides, the changes in Information and Communication Technologies (ICTs) lead to a change in the way information is represented, in particular, information is being fed more easily and distributed more quickly to different stakeholders by the use of tool such as the Building Information Modelling (BIM), with little consideration on incorporating LCC and LCA and their maximised usage within the BIM environment. The aim of this paper is to propose the development of a model-based LCC and LCA tool in order to provide sustainable building design decisions for clients, architects and quantity surveyors, by then an optimal investment decision can be made by studying the trade-off between costs and environmental impacts. An application framework is also proposed finally as the future work that shows how the proposed model can be incorporated into the BIM environment in practise.

Methodology To model the energy and greenhouse gas emissions of electronic software distributions

A new electronic software distribution (ESD) life cycle analysis (LCA)methodology and model structure were constructed to calculate energy consumption and greenhouse gas (GHG) emissions. In order to counteract the use of high level, top-down modeling efforts, and to increase result accuracy, a focus upon device details and data routes was taken. In order to compare ESD to a relevant physical distribution alternative,physical model boundaries and variables were described. The methodology was compiled from the analysis and operational data of a major online store which provides ESD and physical distribution options. The ESD method included the calculation of power consumption of data center server and networking devices. An in-depth method to calculate server efficiency and utilization was also included to account for virtualization and server efficiency features. Internet transfer power consumption was analyzed taking into account the number of data hops and networking devices used. The power consumed by online browsing and downloading was also factored into the model. The embedded CO2e of server and networking devices was proportioned to each ESD process. Three U.K.-based ESD scenarios were analyzed using the model which revealed potential CO2e savings of 83% when ESD was used over physical distribution. Results also highlighted the importance of server efficiency and utilization methods.

Wall materials and techniques available for low cost housing in Khartoum from a sustainability point of view

Khartoum like many cities in least developing countries (LDCs) still witnesses huge influx of people. Accommodation of the new comers leads to encroachment on the cultivation land leads to sprawl expansion of Greater Khartoum. The city expanded in diameter from 16.8 km in 1955 to 802.5 km in 1998. Most of this horizontal expansion was residential. In 2008 Khartoum accommodated 29% of the urban population of Sudan. Today Khartoum is considered as one of 43 major cities in Africa that accommodates more than 1 million inhabitants. Most of new comers live in the outskirts of the city e.g. Dar El-Salam and Mayo neighbourhoods. The majority of those new comers built their houses especially the walls from mud, wood, straw and sacks. Selection of building materials usually depends on its price regardless of the environmental impact, quality, thermal performance and life of the material. Most of the time, this results in increasing the cost with variables of impacts over the environment during the life of the building. Therefore, consideration of the environmental impacts, social impacts and economic impacts is crucial in the selection of any building material. Decreasing such impacts could lead to more sustainable housing. Comparing the sustainability of the available wall building materials for low cost housing in Khartoum is carried out through the life cycle assessment (LCA) technique. The purpose of this paper is to compare the most available local building materials for walls for the urban poor of Khartoum from a sustainability point of view by going through the manufacturing of the materials, the use of these materials and then the disposal of the materials after their life comes to an end. Findings reveal that traditional red bricks couldn’t be considered as a sustainable wall building material that will draw the future of the low cost housing in Greater Khartoum. On the other hand, results of the comparison lead to draw attention to the wide range of the soil techniques and to its potentials to be a promising sustainable wall material for urban low cost housing in Khartoum.

The value of a saved tree : The lifecycle of CO2-emissions associated with the combination of printing paper and electricity production of wood in the U.S. and Sweden

The pulp- and paper production is a very energy intensive industry sector. Both Sweden and the U.S. are major pulpandpaper producers. This report examines the energy and the CO2-emission connected with the pulp- and paperindustry for the two countries from a lifecycle perspective.New technologies make it possible to increase the electricity production in the integrated pulp- andpaper mill through black liquor gasification and a combined cycle (BLGCC). That way, the mill canproduce excess electricity, which can be sold and replace electricity produced in power plants. In thisprocess the by-products that are formed at the pulp-making process is used as fuel to produce electricity.In pulp- and paper mills today the technology for generating energy from the by-product in aTomlinson boiler is not as efficient as it could be compared to the BLGCC technology. Scenarios havebeen designed to investigate the results from using the BLGCC technique using a life cycle analysis.Two scenarios are being represented by a 1994 mill in the U.S. and a 1994 mill in Sweden.The scenariosare based on the average energy intensity of pulp- and paper mills as operating in 1994 in the U.S.and Sweden respectively. The two other scenarios are constituted by a »reference mill« in the U.S. andSweden using state-of-the-art technology. We investigate the impact of varying recycling rates and totalenergy use and CO2-emissions from the production of printing and writing paper. To economize withthe wood and that way save trees, we can use the trees that are replaced by recycling in a biomassgasification combined cycle (BIGCC) to produce electricity in a power station. This produces extra electricitywith a lower CO2 intensity than electricity generated by, for example, coal-fired power plants.The lifecycle analysis in this thesis also includes the use of waste treatment in the paper lifecycle. Both Sweden and theU.S. are countries that recycle paper. Still there is a lot of paper waste, this paper is a part of the countries municipalsolid waste (MSW). A lot of the MSW is landfilled, but parts of it are incinerated to extract electricity. The thesis hasdesigned special scenarios for the use of MSW in the lifecycle analysis.This report is studying and comparing two different countries and two different efficiencies on theBLGCC in four different scenarios. This gives a wide survey and points to essential parameters to specificallyreflect on, when making assumptions in a lifecycle analysis. The report shows that there arethree key parameters that have to be carefully considered when making a lifecycle analysis of wood inan energy and CO2-emission perspective in the pulp- and paper mill in the U.S. and in Sweden. First,there is the energy efficiency in the pulp- and paper mill, then the efficiency of the BLGCC and last theCO2 intensity of the electricity displaced by BIGCC or BLGCC generatedelectricity. It also show that with the current technology that we havetoday, it is possible to produce CO2 free paper with a waste paper amountup to 30%. The thesis discusses the system boundaries and the assumptions.Further and more detailed research, including amongst others thesystem boundaries and forestry, is recommended for more specificanswers.

Projektet Hållbar affärsutveckling : - en följeforskningsbaserad delstudie av ett delprojekt inom InnoWent

Ett ökat miljömedvetande hos konsumenterna gör att de har blivit allt mera medvetna om sitt eget agerande och att de därför i allt högre utsträckning väljer att köpa produkter och tjänster som har producerats på ett miljömedvetet sätt. Detta påverkar företagens sätt att planera, producera och distribuera sina produkter och tjänster. Miljömedvetna företag kan skaffa sig fördelar jämfört med de konkurrenter som inte agerar miljömedvetenhet. För att kunna hänga med i konkurrensen på marknaden måste företagsledare utveckla genomtänkta strategier för hur deras produkter och tjänster ska kunna införlivas i en hållbar affärsutveckling. Detta skapar ett behov av att förse entreprenörer, företagsledare, innovatörer m.fl. med kunskap, metoder och verktyg så att de i tidiga utvecklingsskeenden kan se möjligheterna med att utforma sin affärsidé, produkt eller tjänst i ett hållbarhetsperspektiv.Hållbar affärsutveckling är ett pilotprojekt med målet att stödja inkubatorföretag så att de kan utveckla en s.k. hållbar affärsutveckling.

Avaliação de impactos e custos ambientais em processos industriais : uma abordagem metodológica

A preocupação com a qualidade ambiental aumentou significativamente nos últimos anos. Isso é evidenciado pela rígida legislação ambiental e pela mudança de comportamento da sociedade frente a esse assunto. Nesse contexto, as indústrias vêm sendo pressionadas a adequar seus processos produtivos às novas exigências. A fim de auxiliá-las nessa tarefa, várias metodologias de avaliação ambiental foram desenvolvidas, entre elas a Avaliação do Ciclo de Vida (Life Cycle Assessment – LCA). Ela se destaca por buscar soluções globais e efetivas para os problemas ambientais, através de uma análise sistêmica. No entanto, assim como outras metodologias, o LCA não apresenta uma avaliação econômica estruturada em conjunto com a ambiental. Esta dissertação tem a finalidade de contribuir para o preenchimento dessa lacuna, através do desenvolvimento de uma abordagem consistente e estruturada, capaz de avaliar simultaneamente impactos e custos ambientais em processos industriais. Para isso, foram utilizados como bases teóricas o LCA, o Modelo Econômico de Controle e Avaliação de Impactos Ambientais (MECAIA), a Metodologia para a Contabilidade do Gerenciamento Ambiental (Environmental Management Accounting – EMA), o Método de Custeio Baseado em Atividades (Activity Based Costing – ABC), a Avaliação de Riscos (Risk Assessment) e a Análise de Modos e Efeitos de Falhas (Failure Mode and Effects Analysis – FMEA). A abordagem desenvolvida foi aplicada em uma indústria do setor metal-mecânico para avaliar os impactos e os custos ambientais de seu processo produtivo, evidenciando que aparentemente há uma relação direta entre esses dois fatores, ou seja, os resíduos que geram maior impacto sobre o meio ambiente também apresentam maior custo associado Por fim, constatou-se que a combinação das metodologias, dos métodos e dos modelos utilizados permitiu a elaboração de uma abordagem capaz de orientar a análise de um processo produtivo, a fim de identificar quais as etapas que geram maior impacto sobre o meio ambiente, além de apurar os gastos ambientais e classificá-los nas categorias de prevenção, correção e geração.

Securitização de recebíveis da agroenergia: um estudo de caso baseado em títulos do agronegócio

Desde o final da década de 90, a securitização de ativos vem se firmando no mercado brasileiro como uma importante alternativa de captação de recursos. Essa inovação financeira permite às empresa o acesso direto ao mercado de capitais, para a venda de títulos lastreados em suas carteiras de recebíveis, eliminando a intermediação bancária e permitindo reduções no custo de capital, inclusive em comparação com títulos convencionais de dívida corporativa. Os títulos de securitização são em regra emitidos por um veículo de propósito específico (FIDC ou companhia securitizadora), com o objetivo de segregar os riscos do originador/tomador em relação aos créditos securitizados (lastro da emissão). Em 2004, a Lei 11.076 criou os novos títulos do agronegócio (CDA-WA, CDCA, LCA e CRA), inspirada na legislação da securitização imobiliária (SFI - Lei 9.514/97), buscando disponibilizar ao agronegócio uma nova fonte de recursos, via emissão de títulos no mercado de capitais. Desde então, um número crescente de operações estruturadas com esses papéis pôde ser observada, demonstrando sua funcionalidade e potencial. No entanto, o volume de captações públicas mais sofisticadas fundadas na emissão de cotas de FIDCs e de CRAs ainda se apresenta muito reduzida em relação à demanda do agronegócio por financiamento, sobretudo levando-se em conta a representatividade desse setor no Brasil. O setor sucro-energético é provavelmente o segmento do agronegócio que está em melhor posição para o desenvolvimento de operações de securitização, por apresentar características como: escala, padronização dos produtos, grau de consolidação dos grupos empresariais e perspectivas de crescimento, além do forte apelo ambiental. Os papéis associados a esse segmento possuem, dessa forma, um potencial singular para superar a resistência natural de investidores às aplicações financeiras na área agrícola. Este trabalho dedica-se a investigar como o conceito de securitização pode ser aplicado em operações ligadas ao agronegócio, particularmente ao setor sucro-alcooleiro. A partir de um estudo de caso, serão analisados aspectos operacionais de uma emissão pública de CRAs, ressaltando os mecanismos e procedimentos adotados para lidar com as particularidades dos títulos oriundos do agronegócio. O estudo mostra que a estruturação desse tipo de operação apresenta algumas características e desafios diferentes das operações fundadas em outros papéis, porém a priori administráveis a partir das técnicas tradicionais de securitização e da incorporação de mecanismos suplementares de gestão de riscos.

Effects of Hormonal Supplementation on Nuclear Maturation and Cortical Granules Distribution of Canine Oocytes During Various Reproductive Stages

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência da fadiga no comportamento neuromuscular do quadríceps femoral, após reconstrução do ligamento cruzado anterior

Muscle fatigue is a phenomenon that promotes physiological and biomechanical disorders and their changes in healthy subjects have been widely studied and have significant importance for care in preventing injuries, but we do not have many information about its effects in patients after ACL reconstruction. Thus, this study is to analyze the effects of fatigue on neuromuscular behavior of quadriceps after ACL reconstruction. To reach this objective, participants were forty men, twenty healthy (26,90 ± 6,29 years) and twenty after ACL reconstruction (29,75 ± 7,01 years) with a graft of semitendinosus and gracilis tendons, between four to six months after surgery. At first, there was an assessment of joint position sense (JPS) at the isokinetic dynamometer at a speed of 5°/s and target angle of 45° to analyze the absolute error of JPS. Next, we applied the a muscle fatigue protocol, running 100 repetitions of isokinetic knee flexion-extension at 90°/s. Concurrently with this protocol, there was the assessment of muscle performance, as the peak torque (PT) and fatigue index, and electromyographic activity (RMS and median frequency). Finally, we repeated the assessment of JPS. The statistical analysis showed that patients after ACL reconstruction have, even under normal conditions, the amended JPS compared with healthy subjects and that after fatigue, both have disturbances in the JPS, but this alteration is significantly exacerbated in patients after ACL reconstruction. About muscle performance, we could notice that these patients have a lower PT, although there are no differences between the dynamometric and EMG fatigue index. These findings show the necessity about the cares of pacients with ACL reconstruction in respect of the risks of articulate instability and overload in ligamentar graft