Dictyostelium discoideum as an expression host for the circumsporozoite protein of Plasmodium falciparum.

We have used the cellular slime mold, Dictyostelium discoideum (Dd), to express the Plasmodium falciparum circumsporozoite protein (CS), a potential component of a subunit vaccine against malaria. This was accomplished via an expression vector based on the discoidin I-encoding gene promoter, in which we linked a sequence coding for a Dd leader peptide to the almost complete CS coding region (pEDII-CS). CS production at both the mRNA and protein levels is induced by starving cells in a simple phosphate buffer. Variation in pH or cell density does not seem to influence CS synthesis. CS-producing cells can be grown either on their normal substrate, bacteria, or on a semi-synthetic media, without affecting CS accumulation level. The CS produced in Dd seems similar to the natural parasite protein as judged by its size and epitope recognition by a panel of monoclonal antibodies. We constructed a second expression vector in which the CS is under the control of a Dd ras promoter. CS accumulation can then be induced by external addition of cAMP. Such a tightly regulated promoter may allow expression of proteins potentially toxic to the cell. Thus, Dd could be a useful eukaryotic system to produce recombinant proteins, in particular from human or animal parasites like P. falciparum.

Anchoring of an immunogenic Plasmodium falciparum circumsporozoite protein on the surface of Dictyostelium discoideum.

The circumsporozoite protein (CSP), a major antigen of Plasmodium falciparum, was expressed in the slime mold Dictyostelium discoideum. Fusion of the parasite protein to a leader peptide derived from Dictyostelium contact site A was essential for expression. The natural parasite surface antigen, however, was not detected at the slime mold cell surface as expected but retained intracellularly. Removal of the last 23 amino acids resulted in secretion of CSP, suggesting that the C-terminal segment of the CSP, rather than an ectoplasmic domain, was responsible for retention. Cell surface expression was obtained when the CSP C-terminal segment was replaced by the D. discoideum contact site A glycosyl phosphatidylinositol anchor signal sequence. Mice were immunized with Dictyostelium cells harboring CSP at their surface. The raised antibodies recognized two different regions of the CSP. Anti-sporozoite titers of these sera were equivalent to anti-peptide titers detected by enzyme-linked immunosorbent assay. Thus, cell surface targeting of antigens can be obtained in Dictyostelium, generating sporozoite-like cells having potentials for vaccination, diagnostic tests, or basic studies involving parasite cell surface proteins.

Why Public Health Agencies Cannot Depend on Good Laboratory Practices as a Criterion for Selecting Data: The Case of Bisphenol A

In their safety evaluations of bisphenol A (BPA), the U.S. Food and Drug Administration (FDA) and a counterpart in Europe, the European Food Safety Authority (EFSA), have given special prominence to two industry-funded studies that adhered to standards defined by Good Laboratory Practices (GLP). These same agencies have given much less weight in risk assessments to a large number of independently replicated non-GLP studies conducted with government funding by the leading experts in various fields of science from around the world. OBJECTIVES: We reviewed differences between industry-funded GLP studies of BPA conducted by commercial laboratories for regulatory purposes and non-GLP studies conducted in academic and government laboratories to identify hazards and molecular mechanisms mediating adverse effects. We examined the methods and results in the GLP studies that were pivotal in the draft decision of the U.S. FDA declaring BPA safe in relation to findings from studies that were competitive for U.S. National Institutes of Health (NIH) funding, peer-reviewed for publication in leading journals, subject to independent replication, but rejected by the U.S. FDA for regulatory purposes. DISCUSSION: Although the U.S. FDA and EFSA have deemed two industry-funded GLP studies of BPA to be superior to hundreds of studies funded by the U.S. NIH and NIH counterparts in other countries, the GLP studies on which the agencies based their decisions have serious conceptual and methodologic flaws. In addition, the U.S. FDA and EFSA have mistakenly assumed that GLP yields valid and reliable scientific findings (i.e., "good science"). Their rationale for favoring GLP studies over hundreds of publically funded studies ignores the central factor in determining the reliability and validity of scientific findings, namely, independent replication, and use of the most appropriate and sensitive state-of-the-art assays, neither of which is an expectation of industry-funded GLP research. CONCLUSIONS: Public health decisions should be based on studies using appropriate protocols with appropriate controls and the most sensitive assays, not GLP. Relevant NIH-funded research using state-of-the-art techniques should play a prominent role in safety evaluations of chemicals.

La cascarilla cerámica y su uso innovador

The ceramic shell is a material mainly used for making foundry molds. This research demonstrates that ceramic shell can be used for making sculptures with exceptional definition in its finish. The research has identified a number of advantages of the material to meet the challenges of an artist during the making of a sculpture. The research has been developed in six stages: In the first stage data were collected from the chaff as the process material. This was the starting point for research. In the second stage, we have set the appropriate composition of the slurry, both in percentage and type of binder, and firing curve. To this end, we evaluated the application characteristics, thickness, drying, mechanical strength, the reduction coefficient and porosity. In the third stage it was observed that the husk is suitable for all types of materials acting as support. It was also found that the slurry can be used with various sculptural processes: modeling, molding using silicone or plaster mold, shuttering, with internal metal frame, and so on. In addition, we have established methods to repair and modify the husk by hand and power tools. In the fourth stage we have found ways to modify the surface of the husk with other minerals that affect the structure: introduction of filing of copper, bronze and iron in the slurry ceramics, different staining procedure in hot or cold, by enamel slip, and so on. In the fifth stage sculptures were made using the methods established in the previous stages, to verify this hypothesis. The sixth stage, which is annexed, contains a new method to process the ceramic shell as a mold in casting that emerged from the proven methods in the investigation.

Species-Specific Recognition of Aspergillus fumigatus by Toll-like Receptor 1 and Toll-like Receptor 6.

Background. Aspergillus fumigatus causes invasive aspergillosis, a potentially fatal infection in oncohematological patients. Innate immune detection of A. fumigatus involves Toll-like receptor (TLR) 4 and TLR2, which forms a heterodimer with either TLR1 or TLR6. The role of those coreceptors in Aspergillus sensing is unknown. Methods. Cytokine production was measured in bone marrow-derived macrophages (BMDMs) from wild-type (WT) and TLR-deficient mice after incubation with a WT and an immunogenic RodA-deficient (ΔrodA-47) strain of A. fumigatus and in lungs from these mice after intranasal mold inoculation. Aspergillus fumigatus-mediated NF-κB activation was measured in HEK293T cells transfected with plasmids expressing mouse or human TLRs. Results. Bone marrow-derived macrophages from TLR1- and TLR6-deficient mice produced lower amounts of interleukin 12p40, CXCL2, interleukin 6, and tumor necrosis factor α than BMDMs from WT mice after stimulation with A. fumigatus. Lungs from TLR1- and TLR6-deficient mice had diminished CXCL1 and CXCL2 production and increased fungal burden after intranasal inoculation of ΔrodA A. fumigatus compared with lungs from WT mice. ΔrodA strain-mediated NF-κB activation was observed in HEK293T cells expressing mouse TLR2/1, mouse TLR2/6, and human TLR2/1 but not human TLR2/6. Conclusions. Innate immune detection of A. fumigatus is mediated by TLR4 and TLR2 together with TLR1 or TLR6 in mice and TLR1 but not TLR6 in humans.

Expression and one-step purification of Plasmodium proteins in dictyostelium.

Nearly full-length Circumsporozoite protein (CSP) from Plasmodium falciparum, the C-terminal fragments from both P. falciparm and P. yoelii CSP and a fragment comprising 351 amino acids of P.vivax MSPI were expressed in the slime mold Dictyostelium discoideum. Discoidin-tag expression vectors allowed both high yields of these proteins and their purification by a nearly single-step procedure. We exploited the galactose binding activity of Discoidin Ia to separate the fusion proteins by affinity chromatography on Sepharose-4B columns. Inclusion of a thrombin recognition site allowed cleavage of the Discoidin-tag from the fusion protein. Partial secretion of the protein was obtained via an ER independent pathway, whereas routing the recombinant proteins to the ER resulted in glycosylation and retention. Yields of proteins ranged from 0.08 to 3 mg l(-1) depending on the protein sequence and the purification conditions. The recognition of purified MSPI by sera from P. vivax malaria patients was used to confirm the native conformation of the protein expressed in Dictyostelium. The simple purification procedure described here, based on Sepharose-4B, should facilitate the expression and the large-scale purification of various Plasmodium polypeptides.

Management of severe pediatric subglottic stenosis with glottic involvement.

OBJECTIVE: We sought to describe our experience in the management of complex glotto-subglottic stenosis in the pediatric age group. METHODS: Between 1978 and 2008, 33 children with glotto-subglottic stenosis underwent partial cricotracheal resection, and they form the focus of this study. They were compared with 67 children with isolated subglottic stenosis (no glottic involvement). The outcomes measured were need for revision open surgical intervention, delayed decannulation (>6 months), and operation-specific and overall decannulation rates. Fisher's exact test was used for comparison of outcomes. RESULTS: Results of preoperative evaluation showed Myer-Cotton grade III or IV stenosis in 32 (97%) patients and grade II stenosis in 1 patient. All patients with glotto-subglottic stenosis were treated with partial cricotracheal resection and simultaneous repair of the glottic pathology. Bilateral fixed vocal cords were seen in 19 (58%) of 33 patients, bilateral restricted abduction was seen in 7 (21%) of 33 patients, and unilateral fixed vocal cord was seen in 7 (21%) of 33 patients. Ten patients underwent single-stage partial cricotracheal resection with excision of interarytenoid scar tissue. The endotracheal tube was kept for a mean period of 7 days as a stent. Twenty-three patients underwent extended partial cricotracheal resection with LT-Mold (Bredam S.A., St. Sulpice, Switzerland) or T-tube stenting. The overall decannulation rate included 26 (79%) patients, and the operation-specific decannulation rate included 20 (61%) patients. CONCLUSIONS: Glotto-subglottic stenosis is a complex laryngeal injury associated with delayed decannulation and decreased overall and operation-specific decannulation rates when compared with those after subglottic stenosis without glottic involvement after partial cricotracheal resection.

Kako =to uspje=nije plasirati va=e poslovne talente, December 2001

|elite posao. I osje]ate da negdje, neki poslodavac nudi upravo onakav posao kakav vi \elite -posao na kojem va=e znanje i vje=tine mogu do]i do punog izra\aja, a koji, u isto vrijeme, predstavlja izazov i daje mogu]nost napretka. Da biste ostvarili ovaj korak morate se pripremiti na dobro planiranu potragu za poslom. Imate proizvod koji \elite prodati - va=e znanje, vje=tinu i iskustvo-vas same. Ono =to treba da nau[ite je kako da =to uspje=nije predstavite sebe na tr\i=tu. Neke od informacija datih u ovoj bro=uri mogu vam u tome pomo]i bez obzira da li ste tek zavr=ili =kolu spremni da otpo[nete poslovnu karijeru, ili tra\ite novi posao nakon 20 godina rada. NOTE: BOSNIAN

Kako =to uspje=nije plasirati va=e poslovne talente, December 2001

|elite posao. I osje]ate da negdje, neki poslodavac nudi upravo onakav posao kakav vi \elite -posao na kojem va=e znanje i vje=tine mogu do]i do punog izra\aja, a koji, u isto vrijeme, predstavlja izazov i daje mogu]nost napretka. Da biste ostvarili ovaj korak morate se pripremiti na dobro planiranu potragu za poslom. Imate proizvod koji \elite prodati - va=e znanje, vje=tinu i iskustvo-vas same. Ono =to treba da nau[ite je kako da =to uspje=nije predstavite sebe na tr\i=tu. Neke od informacija datih u ovoj bro=uri mogu vam u tome pomo]i bez obzira da li ste tek zavr=ili =kolu spremni da otpo[nete poslovnu karijeru, ili tra\ite novi posao nakon 20 godina rada. NOTE: BOSNIAN

Evaluation of Bias in the Hamburg Wheel Tracking Device, RB00-010, 2013

As the list of states adopting the HWTD continues to grow, there is a need to evaluate how results are utilized. AASHTO T 324 does not standardize the analysis and reporting of test results. Furthermore, processing and reporting of the results among manufacturers is not uniform. This is partly due to the variation among agency reporting requirements. Some include only the midpoint rut depth, while others include the average across the entire length of the wheel track. To eliminate bias in reporting, statistical analysis was performed on over 150 test runs on gyratory specimens. Measurement location was found to be a source of significant variation in the HWTD. This is likely due to the nonuniform wheel speed across the specimen, geometry of the specimen, and air void profile. Eliminating this source of bias when reporting results is feasible though is dependent upon the average rut depth at the final pass. When reporting rut depth at the final pass, it is suggested for poor performing samples to average measurement locations near the interface of the adjoining gyratory specimens. This is necessary due to the wheel lipping on the mold. For all other samples it is reasonable to only eliminate the 3 locations furthest from the gear house. For multi‐wheel units, wheel side was also found to be significant for poor and good performing samples. After eliminating the suggested measurements from the analysis, the wheel was no longer a significant source of variation.

Field Evaluation of Quality Management Concrete, MLR-97-3, 1998

Quality management concrete allows the contractor to develop the mix design for the portland cement concrete. This research was initiated to gain knowledge about contractor mix designs. An experiment was done to determine the variation in cylinders, beams, and cores that could be used to test the strength of the contractor's mix. In addition, the contractor's cylinder strengths and gradations were analyzed for statistical stability and process capability. This research supports the following conclusions: (1) The mold type used to cast the concrete cylinders had an effect on the compressive strength of the concrete. The 4.5-in. by 9-in. (11.43-cm by 22.86-cm) cylinders had lower strength at a 95% confidence interval than the 4-in. by 8-in. (10.16-cm by 20.32-cm) and 6-in. by 12-in. (15.24-cm by 30.48-cm) cylinders. (2) The low vibration consolidation effort had the lowest strength of the three consolidation efforts. In particular, an interaction occurred between the low vibration effort and the 4.5-in. by 9-in. (11.43-cm by 22.86-cm) mold. This interaction produced very low compressive strengths when compared with the other consolidation efforts. (3) A correlation of 0.64 R-squared was found between the 28 day cylinder and 28 day compressive strengths. (4) The compressive strength results of the process control testing were not in statistical control. The aggregate gradations were mostly in statistical control. The gradation process was capable of meeting specification requirements. However, many of the sieves were off target. (5) The fineness modulus of the aggregate gradations did not correlate well with the strength of the concrete. However, this is not surprising considering that the gradation tests and the strength tests did not represent the same material. In addition, the concrete still has many other variables that will affect its strength that were not controlled.

Immunoproteomics for Serological Diagnosis of Hypersensitivity Pneumonitis Caused by Environmental Microorganisms.

Diagnosis of immunoallergenic pathologies due to microorganisms such as hypersensitivity pneumonitis includes detection of circulating specific antibodies. Detection of precipitins has classically been performed using immunoprecipitation techniques with crude antigenic extracts from microorganisms implicated as etiologic agents. However, these techniques lack standardization because of the different composition of fungal antigenic extracts from one batch to another. Therefore, there is high interest in developing standardized serological diagnostic methods using recombinant antigens. Immunoproteomics have proved to be useful for identifying the immunogenic proteins in several microorganisms linked to hypersensitivity pneumonitis. With this approach, the causative microorganisms are first isolated from the environment of patients. Then the proteins are separated by two-dimensional electrophoresis and revealed by Western blotting with sera of different patients suffering from the disease compared to sera of asymptomatic exposed controls. Immunoreactive proteins are identified by mass spectrometry. Identified immunoreactive proteins found to be specific markers for the disease could be subsequently produced as recombinant antigens using various expression systems to develop ELISA tests. Using recombinant antigens, standardized ELISA techniques can be developed, with sensitivity and specificity reaching 80% and 90%, respectively, and more if using a combination of several antigens. Immunoproteomics can be applied to any environmental microorganisms, with the aim of proposing panels of recombinant antigens able to improve the sensitivity and standardization of serologic diagnosis of hypersensitivity pneumonitis, but also other mold-induced allergic diseases such as allergic broncho pulmonary aspergillosis or asthma.

Isothermal microcalorimetry for antifungal susceptibility testing of Mucorales, Fusarium spp., and Scedosporium spp.

We evaluated isothermal microcalorimetry for real-time susceptibility testing of non-Aspergillus molds. MIC and minimal effective concentration (MEC) values of Mucorales (n = 4), Fusarium spp. (n = 4), and Scedosporium spp. (n = 4) were determined by microbroth dilution according to the Clinical Laboratory Standard Institute M38-A2 guidelines. Heat production of molds was measured at 37 °C in Sabouraud dextrose broth inoculated with 2.5 × 10(4) spores/mL in the presence of amphotericin B, voriconazole, posaconazole, caspofungin, and anidulafungin. As determined by microcalorimetry, amphotericin B was the most active agent against Mucorales (MHIC 0.06-0.125 μg/mL) and Fusarium spp. (MHIC 1-4 μg/mL), whereas voriconazole was the most active agent against Scedosporium spp. (MHIC 0.25 to 8 μg/mL). The percentage of agreement (within one 2-fold dilution) between the MHIC and MIC (or MEC) was 67%, 92%, 75%, and 83% for amphotericin B, voriconazole, posaconazole, and caspofungin, respectively. Microcalorimetry provides additional information on timing of antifungal activity, enabling further investigation of drug-mold and drug-drug interaction, and optimization of antifungal treatment.

Basil conservation affected by cropping season, harvest time and storage period

Fresh basil (Ocimum basilicum L.) is used in food, phytotherapic industry, and in traditional therapeutic, due to its essential oil content and composition. Nevertheless basil can not be kept for long periods after harvest and its quality can be reduced. This work aimed to assess the influence of the season and harvest time in the postharvest conservation of basil stored for different periods. Basil was harvested at 8 am and 4 pm both in August/1999 and January/2000. Cuttings were conditioned in PVC packages and stored for 3, 6, and 9 days. During storage, chlorophyll content, essential oil content and composition were determined as well as microbiological analyses were carried out. Harvest season and the days of storage influenced the final content of essential oil. There was a linear decrease in the content of essential oil, in the chlorophyll content and in the number of mold and yeast colonies during storage. There was no effect of cropping season or harvest hour on essential oil composition, but the eugenol and linalool content increased during storage. Coliforms were under 0.3 MPN g-1 and the number of Staphylococcus aureus was under 1.0x10² UFC g-1.