Physical characteristics of small ions and their interaction with ultrafine particles in the urban environment

In recent years, the effect of ions and ultrafine particles on ambient air quality and human health has been well documented, however, knowledge about their sources, concentrations and interactions within different types of urban environments remains limited. This thesis presents the results of numerous field studies aimed at quantifying variations in ion concentration with distance from the source, as well as identifying the dynamics of the particle ionisation processes which lead to the formation of charged particles in the air. In order to select the most appropriate measurement instruments and locations for the studies, a literature review was also conducted on studies that reported ion and ultrafine particle emissions from different sources in a typical urban environment. The initial study involved laboratory experiments on the attachment of ions to aerosols, so as to gain a better understanding of the interaction between ions and particles. This study determined the efficiency of corona ions at charging and removing particles from the air, as a function of different particle number and ion concentrations. The results showed that particle number loss was directly proportional to particle charge concentration, and that higher small ion concentrations led to higher particle deposition rates in all size ranges investigated. Nanoparticles were also observed to decrease with increasing particle charge concentration, due to their higher Brownian mobility and subsequent attachment to charged particles. Given that corona discharge from high voltage powerlines is considered one of the major ion sources in urban areas, a detailed study was then conducted under three parallel overhead powerlines, with a steady wind blowing in a perpendicular direction to the lines. The results showed that large sections of the lines did not produce any corona at all, while strong positive emissions were observed from discrete components such as a particular set of spacers on one of the lines. Measurements were also conducted at eight upwind and downwind points perpendicular to the powerlines, spanning a total distance of about 160m. The maximum positive small and large ion concentrations, and DC electric field were observed at a point 20 m downwind from the lines, with median values of 4.4×103 cm-3, 1.3×103 cm-3 and 530 V m-1, respectively. It was estimated that, at this point, less than 7% of the total number of particles was charged. The electrical parameters decreased steadily with increasing downwind distance from the lines but remained significantly higher than background levels at the limit of the measurements. Moreover, vehicles are one of the most prevalent ion and particle emitting sources in urban environments, and therefore, experiments were also conducted behind a motor vehicle exhaust pipe and near busy motorways, with the aim of quantifying small ion and particle charge concentration, as well as their distribution as a function of distance from the source. The study found that approximately equal numbers of positive and negative ions were observed in the vehicle exhaust plume, as well as near motorways, of which heavy duty vehicles were believed to be the main contributor. In addition, cluster ion concentration was observed to decrease rapidly within the first 10-15 m from the road and ion-ion recombination and ion-aerosol attachment were the most likely cause of ion depletion, rather than dilution and turbulence related processes. In addition to the above-mentioned dominant ion sources, other sources also exist within urban environments where intensive human activities take place. In this part of the study, airborne concentrations of small ions, particles and net particle charge were measured at 32 different outdoor sites in and around Brisbane, Australia, which were classified into seven different groups as follows: park, woodland, city centre, residential, freeway, powerlines and power substation. Whilst the study confirmed that powerlines, power substations and freeways were the main ion sources in an urban environment, it also suggested that not all powerlines emitted ions, only those with discrete corona discharge points. In addition to the main ion sources, higher ion concentrations were also observed environments affected by vehicle traffic and human activities, such as the city centre and residential areas. A considerable number of ions were also observed in a woodland area and it is still unclear if they were emitted directly from the trees, or if they originated from some other local source. Overall, it was found that different types of environments had different types of ion sources, which could be classified as unipolar or bipolar particle sources, as well as ion sources that co-exist with particle sources. In general, fewer small ions were observed at sites with co-existing sources, however particle charge was often higher due to the effect of ion-particle attachment. In summary, this study quantified ion concentrations in typical urban environments, identified major charge sources in urban areas, and determined the spatial dispersion of ions as a function of distance from the source, as well as their controlling factors. The study also presented ion-aerosol attachment efficiencies under high ion concentration conditions, both in the laboratory and in real outdoor environments. The outcomes of these studies addressed the aims of this work and advanced understanding of the charge status of aerosols in the urban environment.

Researching intuitive interaction

Intuitive interaction is based on past experience and is fast and often non conscious. We have conducted ten studies into this issue over the past ten years, involving more than 400 participants. Data collection methods have included questionnaires, interviews, observations, concurrent and retrospective protocols, and cognitive measures. Coding schemes have been developed to suit each study and involve robust, literature based heuristics. Some other researchers have investigated this issue and their methods are also examined. The paper traces the development of the methods and compares the various approaches used over the years.

Web searcher interaction with the Dogpile.com metasearch engine

Metasearch engines are an intuitive method for improving the performance of Web search by increasing coverage, returning large numbers of results with a focus on relevance, and presenting alternative views of information needs. However, the use of metasearch engines in an operational environment is not well understood. In this study, we investigate the usage of Dogpile.com, a major Web metasearch engine, with the aim of discovering how Web searchers interact with metasearch engines. We report results examining 2,465,145 interactions from 534,507 users of Dogpile.com on May 6, 2005 and compare these results with findings from other Web searching studies. We collect data on geographical location of searchers, use of system feedback, content selection, sessions, queries, and term usage. Findings show that Dogpile.com searchers are mainly from the USA (84% of searchers), use about 3 terms per query (mean = 2.85), implement system feedback moderately (8.4% of users), and generally (56% of users) spend less than one minute interacting with the Web search engine. Overall, metasearchers seem to have higher degrees of interaction than searchers on non-metasearch engines, but their sessions are for a shorter period of time. These aspects of metasearching may be what define the differences from other forms of Web searching. We discuss the implications of our findings in relation to metasearch for Web searchers, search engines, and content providers.

The internetalisation of information, knowledge and interaction components of the firm’s internationalisation process

Transcending traditional national borders, the Internet is an evolving technology that has opened up many new international market opportunities. However, ambiguity remains, with limited research and understanding of how the Internet influences the firm’s internationalisation process components. As a consequence, there has been a call for further investigation of the phenomenon. Thus, the purpose of this study was to investigate the Internet’s impact on the internationalisation process components, specifically, information availability, information usage, interactive communication and international market growth. Analysis was undertaken using structural equation modelling. Findings highlight the mediating impact of the Internet on information and knowledge transference in the internationalisation process. Contributions of the study test conceptualisations and give statistical validation of interrelationships, while illuminating the Internet’s impact on firm internationalisation.

Interaction of myxomatosis and Rabbit Haemorrhagic Disease in wild rabbit

Increasing resistance of rabbits to myxomatosis in Australia has led to the exploration of Rabbit Haemorrhagic Disease, also called Rabbit Calicivirus Disease (RCD) as a possible control agent. While the initial spread of RCD in Australia resulted in widespread rabbit mortality in affected areas, the possible population dynamic effects of RCD and myxomatosis operating within the same system have not been properly explored. Here we present early mathematical modelling examining the interaction between the two diseases. In this study we use a deterministic compartment model, based on the classical SIR model in infectious disease modelling. We consider, here, only a single strain of myxomatosis and RCD and neglect latent periods. We also include logistic population growth, with the inclusion of seasonal birth rates. We assume there is no cross-immunity due to either disease. The mathematical model allows for the possibility of both diseases to be simultaneously present in an individual, although results are also presented for the case where co infection is not possible, since co-infection is thought to be rare and questions exist as to whether it can occur. The simulation results of this investigation show that it is a crucial issue and should be part of future field studies. A single simultaneous outbreak of RCD and myxomatosis was simulated, while ignoring natural births and deaths, appropriate for a short timescale of 20 days. Simultaneous outbreaks may be more common in Queensland. For the case where co-infection is not possible we find that the simultaneous presence of myxomatosis in the population suppresses the prevalence of RCD, compared to an outbreak of RCD with no outbreak of myxomatosis, and thus leads to a less effective control of the population. The reason for this is that infection with myxomatosis removes potentially susceptible rabbits from the possibility of infection with RCD (like a vaccination effect). We found that the reduction in the maximum prevalence of RCD was approximately 30% for an initial prevalence of 20% of myxomatosis, for the case where there was no simultaneous outbreak of myxomatosis, but the peak prevalence was only 15% when there was a simultaneous outbreak of myxomatosis. However, this maximum reduction will depend on other parameter values chosen. When co-infection is allowed then this suppression effect does occur but to a lesser degree. This is because the rabbits infected with both diseases reduces the prevalence of myxomatosis. We also simulated multiple outbreaks over a longer timescale of 10 years, including natural population growth rates, with seasonal birth rates and density dependent(logistic) death rates. This shows how both diseases interact with each other and with population growth. Here we obtain sustained outbreaks occurring approximately every two years for the case of a simultaneous outbreak of both diseases but without simultaneous co-infection, with the prevalence varying from 0.1 to 0.5. Without myxomatosis present then the simulation predicts RCD dies out quickly without further introduction from elsewhere. With the possibility of simultaneous co-infection of rabbits, sustained outbreaks are possible but then the outbreaks are less severe and more frequent (approximately yearly). While further model development is needed, our work to date suggests that: 1) the diseases are likely to interact via their impacts on rabbit abundance levels, and 2) introduction of RCD can suppress myxomatosis prevalence. We recommend that further modelling in conjunction with field studies be carried out to further investigate how these two diseases interact in the population.

Designing well : sustain-able interaction design and vegetarianism

Designing Well: Vegetarianism Sustainability and Interaction Design, focuses on the field of Interaction Design and is an exploration of how design can be reconsidered by employing a different critical lens – that of vegetarianism. By extending the eating analogy to design, other aspects of practice can be reframed and reviewed. This is done through a survey of different ways designers and artists have approached the problems of electricity use. This survey begins by looking at a number of functional products that are currently on the market, and then turns to consider a range of alternate approaches taken in research, art and critical design. The second half of the paper can be considered as a form of contextual review, as a survey of different approaches artists and designers employ to address a specific issue in and through practice. This ranges from pragmatic design to critical and radical interventions.

Modelling the interaction of keratinocytes and fibroblasts during normal and abnormal wound healing processes

The crosstalk between fibroblasts and keratinocytes is a vital component of the wound healing process, and involves the activity of a number of growth factors and cytokines. In this work, we develop a mathematical model of this crosstalk in order to elucidate the effects of these interactions on the regeneration of collagen in a wound that heals by second intention. We consider the role of four components that strongly affect this process: transforming growth factor-beta, platelet-derived growth factor, interleukin-1 and keratinocyte growth factor. The impact of this network of interactions on the degradation of an initial fibrin clot, as well as its subsequent replacement by a matrix that is mainly comprised of collagen, is described through an eight-component system of nonlinear partial differential equations. Numerical results, obtained in a two-dimensional domain, highlight key aspects of this multifarious process such as reepithelialisation. The model is shown to reproduce many of the important features of normal wound healing. In addition, we use the model to simulate the treatment of two pathological cases: chronic hypoxia, which can lead to chronic wounds; and prolonged inflammation, which has been shown to lead to hypertrophic scarring. We find that our model predictions are qualitatively in agreement with previously reported observations, and provide an alternative pathway for gaining insight into this complex biological process.

Genotype x culture media interaction effects on regeneration response of three indica rice cultivars

Interactive effects of genotypes with callus induction and regeneration media combinations on green plantlet regeneration response were studied for three indica rice (Oryza sativa L.) cultivars, IR-72, IR-54 and Karnal Local. Isolated mature-embryoswere used to derive scutellar callus and fifteen media combinations involvingMS, N6, R2, SK1 and some modifications were tested. Regeneration percentage as well as the shoot-bud induction frequency were influenced by genotype, callus induction medium, regeneration medium, interaction between genotype and the two media (callus induction and regeneration) as well the interaction between the callus induction medium and regeneration medium. Basal media combination of SK1m (callusing) and MS (regeneration) was found to be the best for cv. Karnal Local in which regeneration frequency of 88% and shoot-bud induction of 233% was observed. In IR-72, the highest regeneration frequency of 47.5% and shoot-bud induction frequency of 77% was obtained on MS-MS combination. In IR-54, highest regeneration frequency (25%) was recorded on MMS(N)-MMS(N) combination, whereas, highest frequency of shoot-bud induction (50%) was observed on MMS(S)-MS combination. Although genotype and the composition of the callus induction basal medium were the major determinants of regeneration response, an overall analysis of variation also revealed a significant interaction between the media used for de-differentiation (callusing) and re-differentiation (plantlet regeneration)

Principals’ and teacher leaders’ perceptions of their role and interaction under current Chinese reform : a case study in Shandong province

This study aims to explore the perceptions of principals and teacher leaders regarding their roles and the interaction between these roles in Chinese urban primary schools at the time of unprecedented curriculum reform. This involves a complexity of factors such as the influence of globalisation, the impact of traditional Chinese cultural attitudes towards education through Confucianism, and the implementation requirements of the current education reforms. All of these wider contextual factors help to shape the leadership practices that are described in the study. A qualitative exploratory case study approach has been utilised to undertake this investigation. The conceptual framework for this study draws upon scholars‘ work from Western countries but has been adapted in order to address three research questions for the study‘s focus on the context in Shandong province, Mainland China. Three research questions were addressed: First, what are principals‘ perceptions of their leadership roles in Mainland China under current educational reform? Second, what are teacher leaders‘ perceptions of their leadership roles in Mainland China under current educational reform? And finally, what are principals‘ and teacher leaders‘ perceptions of how their roles interact? With reference to the principals in the study, the findings confirm Gurr‘s (2008) comprehensive leadership model relating to four roles, specifically, learning and teaching, symbolic and cultural awareness, future orientation, and accountability. Significantly, some sub-roles that emerge from the data are uniquely Chinese. For example, school culture construction is a very deliberate process in which principals and their staff talked openly about and were involved in creating a positive school climate comprising spiritual, material, and system dimensions. Another finding relates to school feature construction. This refers to the process that principals and staff used to make their schools distinctive and different from other schools and included such features as the school‘s philosophy and the school-based curriculum. In seeking to understand the nature of teacher leadership in Chinese primary schools, this research confirms some findings identified in Western literature. For instance, teacher leaders in Shandong province were involved in decision-making, working with parents and community members, undertaking and planning professional development for staff, and mediating between colleagues (Day & Harris, 2002; Harrison & Killion, 2007; Leithwood, Jantzi, & Steinbach, 1999; Muijs & Harris, 2006; Smylie, 1992). However, some new aspects, such as a heightened awareness of the importance of accountability, emerge from this study. The study‘s conceptual framework also draws upon some significant insights from micropolitics and, in particular, two core constructs, namely cooperation and conflict (Blase, 1991), to explore the interactions between principals and teacher leaders. In this study, principals and teacher leaders employed exchange and facilitation as two strategies in cooperative processes; and they adopted enforcement and compromise in conflictive processes. Finally, the study‘s findings indicate that principals and teacher leaders were developing new ways of interacting in response to the requirements of significant education reform. Most principals were exercising their power through (Blase, 1991) their teacher leaders who in turn, were working in alignment with their principals to achieve the desired outcomes in schools. It was significant that this form of 'parallel leadership' (Crowther, Ferguson, & Ham, 2009) characterised the teacher leadership roles at this period of change to the curriculum in Mainland China.

Teaching and assessing critical thinking : the interaction of student approaches to learning and teaching approaches

This study explored the relationship among student approaches to learning and teaching methods on critical thinking in two business units. Key findings included differences in critical thinking scores between student approaches to learning and some evidence of an interaction between student approaches to learning and critical thinking teach method (immersion vs. infusion). Possible explanations for the results are examined and implications for developing critical thinking skills across a degree discussed. What is apparent is that as Universities move towards program-wide level assessment of critical thinking, further work is required in terms of the design of critical thinking teaching interventions and assessment at the unit, school, and degree level. The session will discuss the challenges in developing critical thinking programs in individual units and at the Faculty level.

Food and interaction design [Extended Abstract]

Food and interaction design presents an interesting challenge to the HCI community in attending to the pervasive nature of food, the socio-cultural differences in food practices and a changing global foodscape. To design for meaningful and positive interactions it is essential to identify daily food practices and the opportunities for the design of technology to support such practices. This workshop brings together a community of researchers and practitioners in human-food interaction to attend to the practical and theoretical difficulties in designing for human-food interactions in everyday life. Through a practical field study and workshop we explore themes of food experiences, health and wellbeing, sustainability and alternative food cultures.

Human–computer interaction : the impact of users’ cognitive styles on query reformulation behaviour during web searching

This paper discusses users’ query reformulation behaviour while searching information on the Web. Query reformulations have emerged as an important component of Web search behaviour and human-computer interaction (HCI) because a user’s success of information retrieval (IR) depends on how he or she formulates queries. There are various factors, such as cognitive styles, that influence users’ query reformulation behaviour. Understanding how users with different cognitive styles formulate their queries while performing Web searches can help HCI researchers and information systems (IS) developers to provide assistance to the users. This paper aims to examine the effects of users’ cognitive styles on their query reformation behaviour. To achieve the goal of the study, a user study was conducted in which a total of 3613 search terms and 872 search queries were submitted by 50 users who engaged in 150 scenario-based search tasks. Riding’s (1991) Cognitive Style Analysis (CSA) test was used to assess users’ cognitive style as wholist or analytic, and verbaliser or imager. The study findings show that users’ query reformulation behaviour is affected by their cognitive styles. The results reveal that analytic users tended to prefer Add queries while all other users preferred New queries. A significant difference was found among wholists and analytics in the manner they performed Remove query reformulations. Future HCI researchers and IS developers can utilize the study results to develop interactive and user-cantered search model, and to provide context-based query suggestions for users.

Identifying familiarity to facilitate intuitive interaction for older adults

Almost every nation on the planet is experiencing increases in both the number and proportion of older adults. Research has shown that older adults use technology less intuitively than younger adults, and have more difficulty with using products effectively. With an ever-increasing population of older adults, it is necessary to understand why they often struggle to use technology, which is becoming more and more important in day to day living. Intuitive use of products is grounded in familiarity and prior experience. The aims of this research were twofold: (i) to examine the differences in familiarity between younger and older adults, to see if this could explain the difficulties faced by some older adults; (ii) to develop investigational methods to assist designers in identifying familiarity in prospective users. Two empirical studies were conducted. The first experiment was conducted in the field with 32 participants, divided across four age groups (18 – 44, 45 – 59, 60 – 74, and 75+). This experiment was conducted in the participants’ homes, with a product they were familiar with. Familiarity was measured through the analysis of data collected through interviews, observation and retrospective protocol. The results of this study show that the youngest group demonstrated significantly higher levels of familiarity with products they own than the 60 – 74 and the 75+ age groups. There were no significant differences between the 18 – 44 age group and the 45 – 59 age group and there were also no significant differences between the three oldest age groups. The second experiment was conducted with 32 participants, across the same four age groups. Four everyday products were used in this experiment. The results of Experiment 2 show that, with previously unused products, younger adults demonstrate significantly higher levels of familiarity than the three older age groups. The three oldest age groups had no significant differences between them. The results of these two studies show that younger adults are more familiar with contemporary products than older adults. They also demonstrate that in terms of familiarity, older adults do not differ significantly as they get older. The results also show that the 45 – 59 age group demonstrate higher levels of familiarity with products they have owned, in comparison with those they have not. The two older age groups did not demonstrate such differences. This suggests that interacting with products over time increases familiarity more for middle-aged adults than for older adults. As a result of this research, a method that can be used by designers to identify potential users’ product familiarity has been identified. This method is easy to use, quick, low cost, highly mobile, flexible, and allows for easy data collection and analysis. A tool has been designed that assists designers and researchers to use the method. Designers can use the knowledge gained from this tool, and integrate it into the design process, resulting in more intuitive products. Such products may lead to improvements in the quality of life of older adults, as a result of improved societal integration, better health management, and more widespread use of communications technology.