A Wiener model for memory high power amplifiers using B-spline function approximation

In this paper we introduce a new Wiener system modeling approach for memory high power amplifiers in communication systems using observational input/output data. By assuming that the nonlinearity in the Wiener model is mainly dependent on the input signal amplitude, the complex valued nonlinear static function is represented by two real valued B-spline curves, one for the amplitude distortion and another for the phase shift, respectively. The Gauss-Newton algorithm is applied for the parameter estimation, which incorporates the De Boor algorithm, including both the B-spline curve and the first order derivatives recursion. An illustrative example is utilized to demonstrate the efficacy of the proposed approach.

Numerical analysis of an incremented statistical sampling procedure in MCNP

MCNP has stood so far as one of the main Monte Carlo radiation transport codes. Its use, as any other Monte Carlo based code, has increased as computers perform calculations faster and become more affordable along time. However, the use of Monte Carlo method to tally events in volumes which represent a small fraction of the whole system may turn to be unfeasible, if a straight analogue transport procedure (no use of variance reduction techniques) is employed and precise results are demanded. Calculations of reaction rates in activation foils placed in critical systems turn to be one of the mentioned cases. The present work takes advantage of the fixed source representation from MCNP to perform the above mentioned task in a more effective sampling way (characterizing neutron population in the vicinity of the tallying region and using it in a geometric reduced coupled simulation). An extended analysis of source dependent parameters is studied in order to understand their influence on simulation performance and on validity of results. Although discrepant results have been observed for small enveloping regions, the procedure presents itself as very efficient, giving adequate and precise results in shorter times than the standard analogue procedure. (C) 2007 Elsevier Ltd. All rights reserved.

Femtosecond light distribution at skin and liver of rats: analysis for use in optical diagnostics

In this study we investigated the light distribution under femtosecond laser illumination and its correlation with the collected diffuse scattering at the surface of ex-vivo rat skin and liver. The reduced scattering coefficients mu`s for liver and skin due to different scatterers have been determined with Mie-scattering theory for each wavelength (800, 630, and 490 nm). Absorption coefficients mu(a) were determined by diffusion approximation equation in correlation with measured diffused reflectance experimentally for each wavelength (800, 630, and 490 nm). The total attenuation coefficient for each wavelength and type of tissue were determined by linearly fitting the log based normalized intensity. Both tissues are strongly scattering thick tissues. Our results may be relevant when considering the use of femtosecond laser illumination as an optical diagnostic tool. [GRAPHICS] A typical sample of skin exposed to 630 nm laser light (C) 2010 by Astro Ltd. Published exclusively by WILEY-VCH Verlag GmbH & Co. KGaA

Systematic structural studies of iron superoxide dismutases from human parasites and a statistical coupling analysis of metal binding specificity

Superoxide dismutases (SODs) are a crucial class of enzymes in the combat against intracellular free radical damage. They eliminate superoxide radicals by converting them into hydrogen peroxide and oxygen. In spite of their very different life cycles and infection strategies, the human parasites Plasmodium falciparum, Trypanosoma cruzi and Trypanosoma brucei are known to be sensitive to oxidative stress. Thus the parasite Fe-SODs have become attractive targets for novel drug development. Here we report the crystal structures of FeSODs from the trypanosomes T. brucei at 2.0 angstrom and T. cruzi at 1.9 angstrom resolution, and that from P. falciparum at a higher resolution (2.0 angstrom) to that previously reported. The homodimeric enzymes are compared to the related human MnSOD with particular attention to structural aspects which are relevant for drug design. Although the structures possess a very similar overall fold, differences between the enzymes at the entrance to the channel which leads to the active site could be identified. These lead to a slightly broader and more positively charged cavity in the parasite enzymes. Furthermore, a statistical coupling analysis (SCA) for the whole Fe/MnSOD family reveals different patterns of residue coupling for Mn and Fe SODs, as well as for the dimeric and tetrameric states. In both cases, the statistically coupled residues lie adjacent to the conserved core surrounding the metal center and may be expected to be responsible for its fine tuning, leading to metal ion specificity.

The Relationship between Transport Infrastructure and EconomicGrowth: An Empirical Analysis Comparing Developing and DevelopedCountries

Gross domestic product (GDP) is generally considered as the most important index and comprehensive measure of the size of economy. This paper investigates empirically the relationship between transport infrastructure (focus on highways) and GDP growth based on a production function approach. The physical stocks of transport infrastructure were used instead of monetary data to measure public capital together with several other variables (labor and private capital) that were hypothesized to affect economic growth. Then we explore a number of subsequent studies that use panel data covering the period between 1992 and 2004. An investigation was done to compare developed countries and developing countries. Results indicate that physical units are positively and significantly related to economic growth. Furthermore there was an interesting finding that the output elasticity with respect to physical units for developed countries is higher than developing countries.

Response surface models to predict broiler performance and applications for economic analysis

A study was carried out to elaborate response surface models using broiler performance data recovered from literature in order to predict performance and elaborate economic analyses. Nineteen studies published between 1995 and 2005 were retrieved using the systematic literature review method. Weight gain and feed conversion data were collected from eight studies that fulfilled the pre-established inclusion criteria, and a response surface model was adjusted using crude protein, environmental temperature, and age as independent variables. The models produced for weight gain (r² = 0.93) and feed conversion (r² = 0.85) were accurate, precise, and not biased. Protein levels, environmental temperature and age showed linear and quadratic effects on weight gain and feed conversion. There was no interaction between protein level and environmental temperature. Age and crude protein showed interaction for weight gain and feed conversion, whereas interaction between age and temperature was detected only for weight gain. It was possible to perform economic analyses to determine maximum profit as a function of the variables that were included in the model. It was concluded that the response surface models are effective to predict the performance of broiler chickens and allow the elaboration of economic analyses to optimize profit.

Numerical analysis of refrigerant flow along non-adiabatic capillary tubes using a two-fluid model

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Loss of Expression and Function of SOCS3 Is an Early Event in HNSCC: Altered Subcellular Localization as a Possible Mechanism Involved in Proliferation, Migration and Invasion

Background: Suppressor of cytokine signaling 3 (SOCS3) is an inducible endogenous negative regulator of signal transduction and activator of transcription 3 (STAT3). Epigenetic silencing of SOCS3 has been shown in head and neck squamous cell carcinoma (HNSCC), which is associated with increased activation of STAT3. There is scarce information on the functional role of the reduction of SOCS3 expression and no information on altered subcellular localization of SOCS3 in HNSCC.Methodology/Principal Findings: We assessed endogenous SOCS3 expression in different HNSCC cell lines by RT-qPCR and western blot. Immunofluorescence and western blot were used to study the subcellular localization of endogenous SOCS3 induced by IL-6. Overexpression of SOCS3 by CMV-driven plasmids and siRNA-mediated inhibition of endogenous SOCS3 were used to verify the role of SOCS3 on tumor cell proliferation, viability, invasion and migration in vitro. In vivo relevance of SOCS3 expression in HNSCC was studied by quantitative immunohistochemistry of commercially-available tissue microarrays. Endogenous expression of SOCS3 was heterogeneous in four HNSCC cell lines and surprisingly preserved in most of these cell lines. Subcellular localization of endogenous SOCS3 in the HNSCC cell lines was predominantly nuclear as opposed to cytoplasmic in non-neoplasic epithelial cells. Overexpression of SOCS3 produced a relative increase of the protein in the cytoplasmic compartment and significantly inhibited proliferation, migration and invasion, whereas inhibition of endogenous nuclear SOCS3 did not affect these events. Analysis of tissue microarrays indicated that loss of SOCS3 is an early event in HNSCC and was correlated with tumor size and histological grade of dysplasia, but a considerable proportion of cases presented detectable expression of SOCS3.Conclusion: Our data support a role for SOCS3 as a tumor suppressor gene in HNSCC with relevance on proliferation and invasion processes and suggests that abnormal subcellular localization impairs SOCS3 function in HNSCC cells.

Reproductive development and function of female rats exposed to di-eta-butyl-phthalate (DBP) in utero and during lactation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Crystallization and preliminary X-ray analysis of bucain, a novel toxin from the Malayan krait Bungarus candidus

Bucain is a three-finger toxin, structurally homologous to snake-venom muscarinic toxins, from the venom of the Malayan krait Bungarus candidus. These proteins have molecular masses of approximately 6000-8000 da and encompass the potent curaremimetic neurotoxins which confer lethality to Elapidae and Hydrophidae venoms. Bucain was crystallized in two crystal forms by the hanging-drop vapour-diffusion technique in 0.1 M sodium citrate pH 5.6, 15% PEG 4000 and 0.15 M ammonium acetate. Form I crystals belong to the monoclinic system space group C2, with unit-cell parameters a = 93.73, b = 49.02, c = 74.09 Angstrom, beta = 111.32degrees, and diffract to a nominal resolution of 1.61 Angstrom. Form II crystals also belong to the space group C2, with unit-cell parameters a = 165.04, b = 49.44, c = 127.60 Angstrom, beta = 125.55degrees, and diffract to a nominal resolution of 2.78 Angstrom. The self-rotation function indicates the presence of four and eight molecules in the crystallographic asymmetric unit of the form I and form II crystals, respectively. Attempts to solve these structures by molecular-replacement methods have not been successful and a heavy-atom derivative search has been initiated.

PHYLOGENETIC STUDIES OF SOME SPECIES OF THE GENUS COFFEA .1. NUMERICAL-ANALYSIS OF FLAVONOID COMPOUNDS

Flavonoid compounds were analyzed in ripe fruit pulp of ten species of Coffea, including two cultivars of C. arabica and two of C. canephora. Three coefficients of similarity: Simple-Matching, Jaccard and Ochiai and three different clustering methods, Single Linkage, Complete Linkage and Unweighted Pair Group, Using Arithmetic Averages (UPGMA), were used to analyze the data.Jaccard and Ochiai's coefficients of association showed a more coherent result, when compared with taxonomic and hybridization studies. Inclusion of Psilanthopsis kapakata in the genus Coffea, as C. kapakata, is justified by the similarity of this species with other studied species, and clusters clearly approximate the species C. arabica and C. eugenioides. The latter is one of the possible parents of the allotetraploid species C. arabica, C. congensis is the only species whose position remains ambiguous, probably due to the fact that the plants of this species that were introduced into the Campinas collections, were hybrids and not typical of C. congensis.

Grazing incidence X-ray diffraction and atomic force microscopy analysis of BaBi2Ta2O9 thin films

Thin films of BaBi2Ta2O9 (BBT) composition were prepared through the metal organic decomposition method. The crystallinity, phase formation, crystallite size and morphology of the thin films were measured as a function of the type of substrate, stoichiometry of solution and process variables such as thickness and temperature. The thin films were investigated by grazing incidence X-ray diffractometry and atomic force microscopy (AFM) techniques. For the sample without excess of bismuth, diffraction peaks other than that of the BBT phase were observed. A well crystallized BBT single phase was observed for films prepared from a solution with 10% excess of bismuth, deposited on Si/Pt substrate, with a thickness up to 150 nm and sintered at temperatures of 700 degreesC. The thin BBT phase films heat-treated at 600 degreesC presented a diffraction pattern characteristic of samples with lower degree of crystallinity whereas for the thin films heat-treated at 800 degreesC, we observed the presence of other phases than the BBT. For the thin film deposited on the Sin+ substrate, we observe that the peaks corresponding to the BBT phase are broader than that observed on the samples deposited on the Pt and Si/Pt substrates. No variation of average crystallite size was observed as the excess of Bi increased from 10 to 20%. AFM images for the samples showed that the increasing the amount of bismuth promotes grain growth. The average surface roughness measured was in the range of 16-22 nm showing that the bismuth amount had no or little effect on the roughness of films. (C) 2002 Elsevier B.V. B.V. All rights reserved.

PHYLOGENETIC STUDIES OF SOME SPECIES OF THE GENUS COFFEA .2. NUMERICAL-ANALYSIS OF ISOENZYMATIC DATA

Thirteen species of Coffea were studied for five enzymes systems, including alpha and beta esterase, alkaline phosphatase, acid phosphatase, malate dehydrogenase and acid dehydrogenase. Three coefficients of similarity: Simple Matching, Jaccard and Ochiai and three different clustering methods: Single Linkage, Complete Linkage and Unweighted Pair Group, using Arithmetic Averages (UPGMA) were used to analyse the data.The phylogenetic relationships among the twelve diploid species and between them and the tetraploid species C. arabica showed that similarity among species of the same subsection is not always greater than among species of different subsections. In addition, although there are several similarity groups in common, established by isoenzymatic polymorphism, morphological characteristics, chemical data, crossability and geographic distribution, there is no common trend among the phylogenetic relationships as indicated by all these different evaluating procedures.

Pyrearinus termitilluminans larval click beetle luciferase: Active site properties, structure and function relationships and comparison with other beetle luciferases

Several beetle luciferases have been cloned and sequenced. However, most studies on structure and function relationships and bioanalytical applications were done with firefly luciferases, which are pH sensitive. Several years ago we cloned Pyrearinus termitilluminans larval click beetle luciferase, which displays the most blue-shifted bioluminescence among beetle luciferases and is pH insensitive. This enzyme was expressed in E. coli, purified, and its properties investigated. This luciferase shows slower luminescence kinetics, KM values comparable to other beetle luciferases and high catalytic constant. Fluorescence studies with 8-anilino-1-naphtalene-sulfonic acid (1,8-ANS) and modeling studies suggest that the luciferin binding site of this luciferase is very hydrophobic, supporting the solvent and orientation polarizability effects as determining mechanisms for bioluminescence colors. Although pH insensitive in the range between pH 6-8, at pH 10 this luciferase displays a remarkable red-shift and broadening of the bioluminescence spectrum. Modeling studies suggest that the residue C312 may play an important role in bioluminescence color modulation. Compared to other beetle luciferases, Pyrearinus termitilluminans luciferase also displays higher thermostability and sustained luminescence in a bacterial cell environment, which makes this luciferase particularly suitable for in vivo cell analysis and bioimaging. © The Royal Society of Chemistry and Owner Societies 2009.

Inequality in education in Costa Rica: The gap between students in public and private schools. An analysis of the results of the Programme for International Student Assessment (PISA)

Includes bibliography.