Test of a Modular Fault Current Limiter for 220 V Line Using YBCO Coated Conductor Tapes With Shunt Protection

A modular superconducting fault current limiter (SFCL) consisting of 16 elements was constructed and tested in a 220 V line for a fault current between 1 kA to 7.4 kA. The elements are made up of second generation (2G) YBCO-coated conductor tapes with stainless steel reinforcement. For each element four tapes were electrically connected in parallel with effective length of 0.4 m per element, totaling 16 elements connected in series. The evaluation of SFCL performance was carried out under DC and AC tests. The DC test was performed through pulsed current tests and its recovery characteristics under load current were analysed by changing the shunt resistor value. The AC test performed using a 3 MVA/220 V/60 Hz transformer has shown the current limiting ratio achieved a factor higher than 10 during fault of up to five cycles without conductor degradation. The measurement of the voltage for each element during the AC test showed that in this modular SFCL the quench is homogeneous and the transition occurs similarly in all the elements.

Feasibility of Electronic Tap-Changing Stabilizers for Medium Voltage Lines-Precedents and New Configurations

Thyristor-based onload tap-changing ac voltage stabilizers are cheap and robust. They have replaced most mechanical tap-changers in low voltage applications from 300 VA to 300 M. Nevertheless, this replacement hardily applies to tap-changers associated to transformers feeding medium-voltage lines (typically 69 kV primary, 34.5 kV line, 10 MVA) which need periodical maintenance of contacts and oil. The Electric Power Research Institute (EPRI) has studied the feasibility of this replacement. It detected economical problems derived from the need for series association of thyristors to manage the high voltages involved, and from the current overload developed under line fault. The paper reviews the configurations used in that field and proposes new solutions, using a compensating transformer in the main circuit and multi-winding coils in the commutating circuit, with reduced overload effect and no series association of thyristors, drastically decreasing their number and rating. The stabilizer can be installed at any point of the line and the electronic circuit can be fixed to ground. Subsequent works study and synthesize several commutating circuits in detail.

Comparison Between Voltage Control Structures of Synchronous Machines

This paper compares the behaviour of two different control structures of automatic voltage regulators of synchronous machines equipped with static excitation systems. These systems have a fully controlled thyristor bridge that supplies DC current to the rotor winding. The rectifier bridge is fed by the stator terminals through a step-down transformer. The first control structure, named ""Direct Control"", has a single proportional-integral (PI) regulator that compares stator voltage setpoint with measured voltage and acts directly on the thyristor bridge`s firing angle. This control structure is usually employed in commercial excitation systems for hydrogenerators. The second structure, named ""Cascade Control"", was inspired on control loops of commercial DC motor drives. Such drives employ two PIs in a cascade arrangement, the external PI deals with the motor speed while the internal one regulates the armature current. In the adaptation proposed, the external PI compares setpoint with the actual stator voltage and produces the setpoint to the internal PI-loop which controls the field current.

Multi-actuated functionally graded piezoelectric micro-tools design: A multiphysics topology optimization approach

Micro-tools offer significant promise in a wide range of applications Such as cell Manipulation, microsurgery, and micro/nanotechnology processes. Such special micro-tools consist of multi-flexible structures actuated by two or more piezoceramic devices that must generate output displacements and forces lit different specified points of the domain and at different directions. The micro-tool Structure acts as a mechanical transformer by amplifying and changing the direction of the piezoceramics Output displacements. The design of these micro-tools involves minimization of the coupling among movements generated by various piezoceramics. To obtain enhanced micro-tool performance, the concept of multifunctional and functionally graded materials is extended by, tailoring elastic and piezoelectric properties Of the piezoceramics while simultaneously optimizing the multi-flexible structural configuration using multiphysics topology optimization. The design process considers the influence of piezoceramic property gradation and also its polarization sign. The method is implemented considering continuum material distribution with special interpolation of fictitious densities in the design domain. As examples, designs of a single piezoactuator, an XY nano-positioner actuated by two graded piezoceramics, and a micro-gripper actuated by three graded piezoceramics are considered. The results show that material gradation plays an important role to improve actuator performance, which may also lead to optimal displacements and coupling ratios with reduced amount of piezoelectric material. The present examples are limited to two-dimensional models because many of the applications for Such micro-tools are planar devices. Copyright (c) 2008 John Wiley & Sons, Ltd.

Cardiovascular Simulator Improvement: Pressure Versus Volume Loop Assessment

This article presents improvement on a physical cardiovascular simulator (PCS) system. Intraventricular pressure versus intraventricular volume (PxV) loop was obtained to evaluate performance of a pulsatile chamber mimicking the human left ventricle. PxV loop shows heart contractility and is normally used to evaluate heart performance. In many heart diseases, the stroke volume decreases because of low heart contractility. This pathological situation must be simulated by the PCS in order to evaluate the assistance provided by a ventricular assist device (VAD). The PCS system is automatically controlled by a computer and is an auxiliary tool for VAD control strategies development. This PCS system is according to a Windkessel model where lumped parameters are used for cardiovascular system analysis. Peripheral resistance, arteries compliance, and fluid inertance are simulated. The simulator has an actuator with a roller screw and brushless direct current motor, and the stroke volume is regulated by the actuator displacement. Internal pressure and volume measurements are monitored to obtain the PxV loop. Left chamber internal pressure is directly obtained by pressure transducer; however, internal volume has been obtained indirectly by using a linear variable differential transformer, which senses the diaphragm displacement. Correlations between the internal volume and diaphragm position are made. LabVIEW integrates these signals and shows the pressure versus internal volume loop. The results that have been obtained from the PCS system show PxV loops at different ventricle elastances, making possible the simulation of pathological situations. A preliminary test with a pulsatile VAD attached to PCS system was made.

The effect of solidification rate on the structure of magnesium-aluminium eutectic grains

A magnesium-aluminium alloy of eutectic composition was solidified under two different cooling conditions, producing a low and a high growth rate of the eutectic solid-liquid interface. The high growth rate specimen contained smaller eutectic grains and cells, with a smaller interphase spacing compared with the low growth rate specimen. The high growth rate specimen also contained some primary Mg17Al12 dendrites, suggesting that the coupled zone is skewed towards the Mg phase with increased undercooling, A lamellar eutectic morphology was observed in the low growth rate specimen, while the morphology was fibrous in the high growth rate specimen.

Mathematical models in percutaneous absorption

A number of mathematical models have been used to describe percutaneous absorption kinetics. In general, most of these models have used either diffusion-based or compartmental equations. The object of any mathematical model is to a) be able to represent the processes associated with absorption accurately, b) be able to describe/summarize experimental data with parametric equations or moments, and c) predict kinetics under varying conditions. However, in describing the processes involved, some developed models often suffer from being of too complex a form to be practically useful. In this chapter, we attempt to approach the issue of mathematical modeling in percutaneous absorption from four perspectives. These are to a) describe simple practical models, b) provide an overview of the more complex models, c) summarize some of the more important/useful models used to date, and d) examine sonic practical applications of the models. The range of processes involved in percutaneous absorption and considered in developing the mathematical models in this chapter is shown in Fig. 1. We initially address in vitro skin diffusion models and consider a) constant donor concentration and receptor conditions, b) the corresponding flux, donor, skin, and receptor amount-time profiles for solutions, and c) amount- and flux-time profiles when the donor phase is removed. More complex issues, such as finite-volume donor phase, finite-volume receptor phase, the presence of an efflux. rate constant at the membrane-receptor interphase, and two-layer diffusion, are then considered. We then look at specific models and issues concerned with a) release from topical products, b) use of compartmental models as alternatives to diffusion models, c) concentration-dependent absorption, d) modeling of skin metabolism, e) role of solute-skin-vehicle interactions, f) effects of vehicle loss, a) shunt transport, and h) in vivo diffusion, compartmental, physiological, and deconvolution models. We conclude by examining topics such as a) deep tissue penetration, b) pharmacodynamics, c) iontophoresis, d) sonophoresis, and e) pitfalls in modeling.

Primary Cutaneous Blastoid Mantle Cell Lymphoma-Case Report

Mantle cell lymphoma (MCL) commonly involves extranodal sites, usually as a manifestation of disseminated disease. In rare cases, MCLs may arise as a primary tumor in the skin. Blastoid mantle cell lymphoma (BV-MCL) is a rare variant and has a more aggressive clinical course. The phenotype of BV-MCL is characterized as CD20(+), CD5(+), cyclin D1(+), CD23(-), and CD10(-). Interphase fluorescence in situ hybridization shows a characteristic t(11; 14) fusion pattern. We report a case of a BV-MCL arising in skin as primary cutaneous MCL with the characteristic immunophenotype and translocation.

Tetrasomy 8 in a patient with chronic lymphocytic leukemia

We report a case of a 47-year-old man diagnosed with chronic lymphocytic leukemia (CLL) with two extra copies of chromosome 8. Classical cytogenetic analysis by the immunostimulatory combination of DSP30 and interleukin 2 showed tetrasomy of chromosome 8 in 60% of the metaphase cells (48,XY,+8,+8[12]/46,XY[8]). Spectral karyotype analysis confirmed the abnormality previously seen by G banding. Additionally, interphase fluorescence in situ hybridization using an LSI CEP 8 probe performed on peripheral blood cells without any stimulant agent showed tetrasomy of chromosome 8 in 54% of analyzed cells (108 of 200). To our knowledge, tetrasomy 8 as the sole chromosomal abnormality in CLL has not been previously described. The prognostic significance of tetrasomy 8 in CLL remains to be elucidated. However, the patient has been followed up in the outpatient hospital since 2004 without any therapeutic intervention and has so far remained stable. (C) 2010 Elsevier Inc. All rights reserved.

A formal model of real-time program compilation

Program compilation can be formally defined as a sequence of equivalence-preserving transformations, or refinements, from high-level language programs to assembler code, Recent models also incorporate timing properties, but the resulting formalisms are intimidatingly complex. Here we take advantage of a new, simple model of real-time refinement, based on predicate transformer semantics, to present a straightforward compilation formalism that incorporates real-time constraints. (C) 2002 Elsevier Science B.V. All rights reserved.

Review of time-domain polarization measurements for assessing insulation condition in aged transformers

This paper presents a review of the time-domain polarization measurement techniques for the condition assessment of aged transformer insulation. The polarization process is first described with appropriate dielectric response theories and then commonly used polarization methods are described with special emphasis on the most widely used return voltage(rv) measurement. Most recent emphasis has been directed to techniques of determining moisture content of insulation indirectly by measuring rv parameters. The major difficulty still lies with the accurate interpretation of return voltage results. This paper investigates different thoughts regarding the interpretation of rv results for different moisture and ageing conditions. Other time domain polarization measurement techniques and their results are also presented in this paper.

A educação ambiental nos espaços de convivência : tecendo a cultura da sustentabilidade nas redes cotidianas de uma escola municipal de Vila Velha/ES

Este trabalho tem como objetivo problematizar a ecoformação de professoras e alunos em espaços de convivência, potencializados com as experiências da IV Conferência Nacional Infanto-juvenil de Meio Ambiente (CNIJMA), visitas monitoradas, aulas de campo e saídas. Ancorada na Política Estruturante de Educação Ambiental, entendo que esses espaços de convivência expressam um processo educacional, permanente, continnum e transformador. Tendo como mediadora a COM-Vida (Comissão de Meio Ambiente e Qualidade de Vida) e o Tratado de Educação Ambiental para as Sociedades Sustentáveis e Responsabilidade Global, a Educação Ambiental visa fortalecer a cidadania ambiental em movimento escola-comunidade-escola. Impregnada de sentidos e significados, busquei pesquisar a ecoformação dessa coletividade pelo viés do Paradigma da Complexidade, que me apresentou as incertezas como um processo potencializador da criatividade, da amizade e da solidariedade que tecem a rede de saberes e fazeres que envolvem esses sujeitos investigados, além de evidenciar o cuidado de si com o outro e com o mundo. Ao trilhar os caminhos desta pesquisa, optei por abordagens qualitativas inspiradas na fenomenologia-existencial proposta por Martin Heidegger, Michèle Sato e Paulo Freire e, dessa forma, pude investigar os saberes ambientais que atravessam as redes cotidianas da escola pesquisada, potencializando a cultura da sustentabilidade. Valendo-me da observação participante das práticas pedagógicas, encontrei nas narrativas das professoras e alunos a expressividade de um processo ecoformativo que instiga outras racionalidades comprometidas com a ética, a coletividade, a afetividade, a solidariedade, as transformações sociais, a diversidade e a outridade.

Diálogos sobre a alfabetização, a leitura e a escrita no Programa Provinha Brasil

Esta pesquisa documental analisa as concepções de alfabetização, leitura e escrita subjacentes à Provinha Brasil no período 2008-2012 e o panorama em que esse programa de avaliação é produzido. Parte do referencial bakhtiniano e do conceito de alfabetização de Gontijo (2008, 2013). Ao tomar a Provinha como gênero do discurso, discute os elos precedentes dentro do contexto de produção dessa avaliação, a autoria do Programa e seus principais destinatários. Constata que a Provinha é criada como resposta às demandas de avaliação da alfabetização provenientes de organismos internacionais como o Banco Mundial e a Organização das Nações Unidas para a Educação (Unesco). A avaliação é elaborada pelo Instituto Nacional de Estudos e Pesquisas Educacionais Anísio Teixeira (Inep) como órgão que coordena as avaliações no País, em colaboração com pesquisadores de universidades e de organizações da sociedade civil, para demonstrar confiabilidade científica aliada à participação democrática no processo de produção. Seus principais destinatários são gestores de Secretarias de Educação e professores. Aos primeiros, cabe aderir ao programa de avaliação e tomar medidas administrativas para sua operacionalização nas redes. Os docentes têm o papel central de seguir as orientações do material e reorganizar sua prática em função de melhorias nos desempenhos das crianças no teste. Estas, por sua vez, são desconsideradas como sujeitos de dizeres e é legitimado um discurso homogeneizador sobre seu desenvolvimento. A partir dos testes aplicados e das matrizes de referência e seus eixos, a pesquisa analisa como a diferenciação teórica entre alfabetização e letramento se concretiza na organização das provas. A alfabetização, entendida como apropriação do sistema de escrita, é avaliada no primeiro eixo do teste principalmente como identificação de unidades menores da língua, como letras, sílabas e fonemas. As habilidades de leitura, ligadas ao letramento como concebido nos pressupostos do programa, são aferidas ora como decodificação de palavras e frases descontextualizadas, ora como apreensão de significado predeterminado do texto. A escrita somente é avaliada no ano de 2008 e por meio de itens que solicitavam codificação de palavras e frases ditadas pelo aplicador. Desse modo, a Provinha Brasil contribui para a subtração das potencialidades políticas e transformadoras do aprendizado da língua materna no País.

Cytogenetic and identification of the nucleolus organizer region in Heliconia bihai (L.) L.

The genus Heliconia is not much studied and the number of existing species in this genus is still uncertain. It is known that this number relies between 150 to 250 species. In Brazil, about 40 species are native and known by many different names. The objective of this paper was to characterize morphometrically and to identify the NOR (active nucleolus organizer regions) by Ag-NOR banding of chromosomes of Heliconia bihai (L) L. Root meristems were submitted to blocking treatment in an amiprofos-methyl (APM) solution, fixed in methanol-acetic acid solution for 24 hours, at least. The meristems were washed in distilled water and submitted to enzymatic digestion with pectinase enzyme. The slides were prepared by dissociation of the root meristem, dried in the air and also on hot plate at 50°C. Subsequently, some slides were submitted to 5% Giemsa stain for karyotype construction and to a solution of silver nitrate (AgNO3) 50% for Ag-NOR banding. The species H. bihai has 2n = 22 chromosomes, 4 pairs of submetacentric chromosomes and 7 pairs of metacentric chromosomes, and graded medium to short (3.96 to 0.67 μM), with the presence of active NOR in pairs 1 and 2 and interphase cells with 2 nucleoli. These are the features of a diploid species.

Electromagnetic transients analysis of lightning overvoltages on wind power plants

As wind power generation undergoes rapid growth, lightning and overvoltage incidents involving wind power plants have come to be regarded as a serious problem. Firstly, lightning location systems are discussed, as well as important parameters regarding lightning protection. Also, this paper presents a case study, based on a wind turbine with an interconnecting transformer, for the study of adequate lightning and overvoltage protection measures. The electromagnetic transients circuit under study is described, and computational results are presented.