Family type and depression in pregnancy: Factors mediating risk in a community sample

The rate of severe depression among women in single-parent and biological families and in a variety of stepfamilies was examined in a large community sample of 13,088 pregnant women in the United Kingdom. Compared with women in biological families and published population rates, women in single-parent families and step-families reported significantly elevated rates of depression. Family-type differences in several risk factors were examined, including cohabiting (vs. married) status, relationship history, and socioeconomic and psychosocial risks, such as crowding, social support, and stressful life events. Family-type differences in depression were mediated partly by differences in social support, stressful life events, and crowding, but a main effect of family type in predicting depression remained after statistically controlling for these risks.

Cognitive Functioning in Young Adults with Depression, Anxiety Disorders, or Burnout Symptoms : Findings from a Population-based Sample

Background. Evidence of cognitive dysfunction in depressive and anxiety disorders is growing. However, the neuropsychological profile of young adults has received only little systematic investigation, although depressive and anxiety disorders are major public health problems for this age group. Available studies have typically failed to account for psychiatric comorbidity, and samples derived from population-based settings have also seldom been investigated. Burnout-related cognitive functioning has previously been investigated in only few studies, again all using clinical samples and wide age groups. Aims. Based on the information gained by conducting a comprehensive review, studies on cognitive impairment in depressive and anxiety disorders among young adults are rare. The present study examined cognitive functioning in young adults with a history of unipolar depressive or anxiety disorders in comparison to healthy peers, and associations of current burnout symptoms with cognitive functioning, in a population-based setting. The aim was also to determine whether cognitive deficits vary as a function of different disorder characteristics, such as severity, psychiatric comorbidity, age at onset, or the treatments received. Methods. Verbal and visual short-term memory, verbal long-term memory and learning, attention, psychomotor processing speed, verbal intelligence, and executive functioning were measured in a population-based sample of 21-35 year olds. Performance was compared firstly between participants with pure non-psychotic depression (n=68) and healthy peers (n=70), secondly between pure (n=69) and comorbid depression (n=57), and thirdly between participants with anxiety disorders (n=76) and healthy peers (n=71). The diagnostic procedure was based on the SCID interview. Fourthly, the associations of current burnout symptoms, measured with the Maslach Burnout Inventory General Survey, and neuropsychological test performance were investigated among working young adults (n=225). Results. Young adults with depressive or anxiety disorders, with or without psychiatric comorbidity, were not found to have major cognitive impairments when compared to healthy peers. Only mildly compromised verbal learning was found among depressed participants. Pure and comorbid depression groups did not differ in cognitive functioning, either. Among depressed participants, those who had received treatment showed more impaired verbal memory and executive functioning, and earlier onset corresponded with more impaired executive functioning. In anxiety disorders, psychotropic medication and low psychosocial functioning were associated with deficits in executive functioning, psychomotor processing speed, and visual short-term memory. Current burnout symptoms were associated with better performance in verbal working memory and verbal intelligence. However, lower examiner-rated social and occupational functioning was associated with problems in verbal attention, memory, and learning. Conclusions. Depression, anxiety disorders, or burnout symptoms may not be associated with major cognitive deficits among young adults derived from the general population. Even psychiatric comorbidity may not aggravate cognitive functioning in depressive or anxiety disorders among these young adults. However, treatment-seeking in depression was found to be associated with cognitive deficits, suggesting that these deficits relate to increased distress. Additionally, early-onset depression, found to be associated with executive dysfunction, may represent a more severe form of the disorder. In anxiety disorders, those with low symptom-related psychosocial functioning may have cognitive impairment. An association with self-reported burnout symptoms and cognitive deficits was not detected, but individuals with low social and occupational functioning may have impaired cognition.

Is your sample cupboard relevant to your practice?

Sample medications represented 4 (3.8 million Australian dollars) of the Australian general practice promotional budget of pharmaceutical companies in the second quarter of 2005. In the United States, general practitioners have been shown to use sample medication in up to 20 of encounters both for commencing and for full treatment. Given the USA does not have a universal subsidy for medications like Australia, sample use may be higher than Australian GPs operating with the Pharmaceutical Benefits Scheme. Australian GPs perceive benefits for samples as a trial run: to test patient tolerability, enhance patient satisfaction, and for those who cannot afford multiple trials of drugs. Acceptance of samples by GPs is associated with preference for and rapid prescription of new drugs and positive attitudes toward pharmaceutical representatives. Concerns with sample medications include prescribing medication that is not the GP's preferred choice owing to the limited range of samples available. Other concerns include dispensing expired medication and wastage of medications.

Genetic variation in tumour necrosis factor and lymphotoxin is not associated with endometriosis in an Australian sample

BACKGROUND Tumour necrosis factor (TNF) is a pleiotropic cytokine with a wide range of immunoregulatory effects. Variation in the promoter region of TNF and the neighbouring lymphotoxin alpha (LTA) gene might be associated with endometriosis. METHODS We examined the association between endometriosis and common single-nucleotide polymorphisms (SNPs) or haplotypes in the TNF/LTA region in an Australian sample by analysing 26 SNPs in 958 endometriosis cases and 959 unrelated controls. We selected functional SNPs in the coding and the promoter region of the TNF gene and HapMap tagging SNPs and typed them on a Sequenom MassARRAY platform. A key SNP (rs1800630) in the promoter region typed in previous studies did not give reliable results. Therefore, we also examined a statistically identical (r(2) = 1) SNP (siSNP) (rs2844482), identified using the web based program ssSNPer. RESULTS Genotype completion rate was 99.5% for SNPs spanning a region of 15.5 kb across the TNF/LTA locus. There was no evidence for association between endometriosis and TNF/LTA SNPs or SNP haplotypes in our case-control study. CONCLUSIONS Our data suggest both TNF and LTA genes are not major susceptibility genes for endometriosis.

Focus on opportunities as a boundary condition of the relationship between job control and work engagement: A multi-sample, multi-method study

The concept of focus on opportunities describes how many new goals, options, and possibilities employees believe to have in their personal future at work. In this multi-sample, multi-method study, the authors investigated relationships between focus on opportunities and general and daily work engagement and the moderating role of focus on opportunities on between- and within-person relationships between job control and work engagement. Based on a social cognitive theory framework on the motivating potential of a future temporal focus, it was hypothesized that focus on opportunities is positively related to work engagement. Further, consistent with the notion of compensatory resources, it was expected that job control is not related to work engagement among employees with a high focus on opportunities, whereas job control, as an external resource of the work environment, is positively related to work engagement among employees with a low focus on opportunities. Both a cross-sectional survey study (N=174) and a daily diary study (N=64) supported the hypotheses. The study contributes to research on the job demands-resources model as it emphasizes the role of focus on opportunities as a motivational factor in the relationship between job control and work engagement.

A convenient sample preparation protocol for scanning electron microscope examination of xylem-occluding bacterial biofilm on cut flowers and foliage

Microbes and their exopolysaccharides (EPS) can block xylem vessels, thereby increasing the hydraulic resistance and decreasing the vase life of cut flowers and foliage. Scanning electron microscopy (SEM) provides a powerful tool for investigation of bacteria-induced xylem occlusion. However, conventional preparation protocols for SEM involving chemicals can cause loss of hydrated EPS material, and thereby damage the bacterial biofilms during dehydration. A modified chemical fixation protocol involving pre-fixation with 75 mM lysine plus 2.5% glutaraldehyde followed by the normal fixation in 3% glutaraldehyde was, therefore, tested for improved preservation of bacterial biofilm at the stem-ends of cut Acacia holosericea foliage stems. Stem-end segments with different stages of bacterial growth were obtained from stems stood into water. The lysine-based protocol was compared with four other processing protocols of critical point drying (CPD) without fixation (control), freeze-drying (FD), conventional chemical fixation followed by drying with hexamethyldisilazane (HMDS), and conventional chemical fixation with CPD. The non-fixed control. FD and the glutaraldehyde fixation with HMDS drying gave poor preservation of hydrated material, including bacterial EPS. Conventional glutaraldehyde fixation followed by CPD was superior to these three methods in terms of better preserving the EPS. However, this fourth method gave condensation of biofilms during dehydration. In contrast, the modified lysine-based protocol resulted in superior preservation of EPS and biofilm structure. Thus, this fifth method was the most appropriate for examination of bacterial stem-end blockage in cut ornamentals. (C) 2012 Elsevier B.V. All rights reserved.

Development of Sample Pretreatment and Liquid Chromatographic Techniques for Antioxidative Compounds

In this study, novel methodologies for the determination of antioxidative compounds in herbs and beverages were developed. Antioxidants are compounds that can reduce, delay or inhibit oxidative events. They are a part of the human defense system and are obtained through the diet. Antioxidants are naturally present in several types of foods, e.g. in fruits, beverages, vegetables and herbs. Antioxidants can also be added to foods during manufacturing to suppress lipid oxidation and formation of free radicals under conditions of cooking or storage and to reduce the concentration of free radicals in vivo after food ingestion. There is growing interest in natural antioxidants, and effective compounds have already been identified from antioxidant classes such as carotenoids, essential oils, flavonoids and phenolic acids. The wide variety of sample matrices and analytes presents quite a challenge for the development of analytical techniques. Growing demands have been placed on sample pretreatment. In this study, three novel extraction techniques, namely supercritical fluid extraction (SFE), pressurised hot water extraction (PHWE) and dynamic sonication-assisted extraction (DSAE) were studied. SFE was used for the extraction of lycopene from tomato skins and PHWE was used in the extraction of phenolic compounds from sage. DSAE was applied to the extraction of phenolic acids from Lamiaceae herbs. In the development of extraction methodologies, the main parameters of the extraction were studied and the recoveries were compared to those achieved by conventional extraction techniques. In addition, the stability of lycopene was also followed under different storage conditions. For the separation of the antioxidative compounds in the extracts, liquid chromatographic methods (LC) were utilised. Two novel LC techniques, namely ultra performance liquid chromatography (UPLC) and comprehensive two-dimensional liquid chromatography (LCxLC) were studied and compared with conventional high performance liquid chromatography (HPLC) for the separation of antioxidants in beverages and Lamiaceae herbs. In LCxLC, the selection of LC mode, column dimensions and flow rates were studied and optimised to obtain efficient separation of the target compounds. In addition, the separation powers of HPLC, UPLC, HPLCxHPLC and HPLCxUPLC were compared. To exploit the benefits of an integrated system, in which sample preparation and final separation are performed in a closed unit, dynamic sonication-assisted extraction was coupled on-line to a liquid chromatograph via a solid-phase trap. The increased sensitivity was utilised in the extraction of phenolic acids from Lamiaceae herbs. The results were compared to those of achieved by the LCxLC system.

Achieving a national sample of nursing homes: Balancing probability techniques and practicalities

Sampling design is critical to the quality of quantitative research, yet it does not always receive appropriate attention in nursing research. The current article details how balancing probability techniques with practical considerations produced a representative sample of Australian nursing homes (NHs). Budgetary, logistical, and statistical constraints were managed by excluding some NHs (e.g., those too difficult to access) from the sampling frame; a stratified, random sampling methodology yielded a final sample of 53 NHs from a population of 2,774. In testing the adequacy of representation of the study population, chi-square tests for goodness of fit generated nonsignificant results for distribution by distance from major city and type of organization. A significant result for state/territory was expected and was easily corrected for by the application of weights. The current article provides recommendations for conducting high-quality, probability-based samples and stresses the importance of testing the representativeness of achieved samples.

The psychometric properties of the Kessler Psychological Distress Scale (K6) in a general population sample of adolescents

The 6-item Kessler Psychological Distress Scale (K6; Kessler et al., 2002) is a screener for psychological distress that has robust psychometric properties among adults. Given that a significant proportion of adolescents experience mental illness, there is a need for measures that accurately and reliably screen for mental disorders in this age group. This study examined the psychometric properties of the K6 in a large general population sample of adolescents (N = 4,434; mean age = 13.5 years; 44.6% male). Factor analyses were conducted to examine the dimensionality of the K6 in adolescents and to investigate sex-based measurement invariance. This study also evaluated the K6 as a predictor of scores on the Strengths and Difficulties Questionnaire (SDQ; Goodman, 1997). The K6 demonstrated high levels of internal consistency, with the 6 items loading primarily on 1 factor. Consistent with previous research, females reported higher mean levels of psychological distress when compared with males. The identification of sex-based measurement noninvariance in the item thresholds indicated that these mean differences most likely represented reporting bias in the K6 items rather than true differences in the underlying psychological distress construct. The K6 was a fair to good predictor of abnormal scores on the SDQ, but predictive utility was relatively low among males. Future research needs to focus on refining and augmenting the K6 scale to maximize its utility in adolescents. (PsycINFO Database Record (c) 2015 APA, all rights reserved)

Measurement of the top quark mass at CDF using the “neutrino ϕ weighting” template method on a lepton plus isolated track sample

We present a measurement of the top quark mass with t-tbar dilepton events produced in p-pbar collisions at the Fermilab Tevatron $\sqrt{s}$=1.96 TeV and collected by the CDF II detector. A sample of 328 events with a charged electron or muon and an isolated track, corresponding to an integrated luminosity of 2.9 fb$^{-1}$, are selected as t-tbar candidates. To account for the unconstrained event kinematics, we scan over the phase space of the azimuthal angles ($\phi_{\nu_1},\phi_{\nu_2}$) of neutrinos and reconstruct the top quark mass for each $\phi_{\nu_1},\phi_{\nu_2}$ pair by minimizing a $\chi^2$ function in the t-tbar dilepton hypothesis. We assign $\chi^2$-dependent weights to the solutions in order to build a preferred mass for each event. Preferred mass distributions (templates) are built from simulated t-tbar and background events, and parameterized in order to provide continuous probability density functions. A likelihood fit to the mass distribution in data as a weighted sum of signal and background probability density functions gives a top quark mass of $165.5^{+{3.4}}_{-{3.3}}$(stat.)$\pm 3.1$(syst.) GeV/$c^2$.

Optimization of sample preparation for next-generation sequencing with Illumina Genome Analyzer II

The growing interest for sequencing with higher throughput in the last decade has led to the development of new sequencing applications. This thesis concentrates on optimizing DNA library preparation for Illumina Genome Analyzer II sequencer. The library preparation steps that were optimized include fragmentation, PCR purification and quantification. DNA fragmentation was performed with focused sonication in different concentrations and durations. Two column based PCR purification method, gel matrix method and magnetic bead based method were compared. Quantitative PCR and gel electrophoresis in a chip were compared for DNA quantification. The magnetic bead purification was found to be the most efficient and flexible purification method. The fragmentation protocol was changed to produce longer fragments to be compatible with longer sequencing reads. Quantitative PCR correlates better with the cluster number and should thus be considered to be the default quantification method for sequencing. As a result of this study more data have been acquired from sequencing with lower costs and troubleshooting has become easier as qualification steps have been added to the protocol. New sequencing instruments and applications will create a demand for further optimizations in future.

Electrical switching behavior of amorphous Al23Te77 thin film sample

The electrical switching behavior of amorphous Al23Te77 thin film devices, deposited by flash evaporation, has been studied in co-planar geometry. It is found that these samples exhibit memory type electrical switching. Scanning Electron Microscopic studies show the formation of a crystalline filament in the electrode region which is responsible for switching of the device from high resistance OFF state to low resistance ON state. It is also found that the switching behavior of thin film Al-Te samples is similar to that of bulk samples, with the threshold fields of bulk samples being higher. This has been understood on the basis of higher thermal conductance in bulk, which reduces the Joule heating and temperature rise in the electrode region. (C) 2010 Elsevier B.V. All rights reserved.

On determining the elastic modulus of a cylindrical sample subjected to flexural excitation in a resonant column apparatus

For resonant column tests conducted in the flexure mode of excitation, a new methodology has been proposed to find the elastic modulus and associated axial strain of a cylindrical sample. The proposed method is an improvement over the existing one, and it does not require the assumption of either the mode shape or zero bending moment condition at the top of the sample. A stepwise procedure is given to perform the necessary calculations. From a number of resonant column experiments on aluminum bars and dry sand samples, it has been observed that the present method as compared with the one available in literature provides approximately (i) 5.9%-7.3% higher values of the elastic modulus and (ii) 6.5%-7.3% higher values of the associated axial strains.