Innovation and Globalization Policy in Small Transition Countries ; Case study: Macedonia and Slovenia

Diese Arbeit befasst sich mit der Innovations- und Globalisierungspolitik in kleinen Transformationsländern am Beispiel Mazedoniens; diese wurde mit der Lage in Slowenien verglichen, einem Land von ungefähr gleicher Größe und mit gemeinsamer Vergangenheit als Teilrepublik der Jugoslawischen Föderation, aber mit einem wesentlich höheren ökonomischen Entwicklungsstand. Innovation wird dabei verstanden als „Herstellung, Anpassung und Ausnutzung von Neuerungen“, und sie wird durch das Umfeld, in dem sie stattfindet, beeinflusst. Anpassung und Ausnutzung sind gerade für kleine Transformationsländer von erheblicher Bedeutung, da ihre Fähigkeit zu Herstellung von Neuerungen sehr begrenzt sind. Die Rolle der Innovationspolitik besteht hierbei darin, institutionelle und organisationelle Regulierungen einzuführen, die ein günstiges Umfeld sowohl für Innovationen als auch für die Entwicklung eines nationalen Innovationssystems schaffen. Die Rolle der Politik besteht also nicht in der Innovation als solcher, sondern in der Herstellung der notwendigen Bedingungen für die Industrie und die Forschungseinrichtungen dahingehend zu schaffen, dass sie ihr Wissen, ihre Fertigkeiten und ihre praktischen Erfahrungen für innovative Tätigkeiten einsetzen können. Auf der einen Seite gibt es Institutionen und Organisationen, ohne die die Unternehmen rückständig und wenig leistungsstark wären (etwa das Patentamt oder Institutionen höherer Bildung), und auf der anderen Seite gibt es Institutionen und Organisationen, welche die Unternehmen dabei unterstützen, dass sie ihre Tätigkeit weiter unterstützen (z.B. durch Technologietransfer-Zentren und Netzwerke). Die Leistungen dieser Institutionen und Organisationen sind von großer Bedeutung für die nationalen Innovationssysteme und sollten ihrerseits durch Innovationspolitik unterstützt werden; dies bedeutet jedoch nicht, dass diese Leistungen vom Staat bereitgestellt werden, vielmehr sollte die Wirtschaftspolitik Möglichkeiten für die öffentlich/private oder sogar rein private Bereitstellung solcher Leistungen in Erwägung ziehen; dies würde nicht nur die Kosten für den Staat senken, sondern auch die Effizienz bei der Erstellung dieser Leistungen steigern. Die Arbeit kommt zu dem Schluss, dass das größte Problem der Innovationspolitik in Mazedonien darin besteht, dass es sie gar nicht gibt, und zwar nicht als Folge einer bewussten Entscheidung darüber. Tatsächlich müssen Ressourcen und Zeit für die Schaffung eines nationalen Innovationssystems eingesetzt werden mit Hilfe einer Politik, die sich auf die wesentlichen Umrisse konzentriert, wobei die Nachfrage nach Technologie im Unternehmensbereich gesteigert wird und das Wissen und das Informationsangebot restrukturiert wird. Dieses System muss offen sein, unter beständigem Verbesserungsdruck stehen und fähig sein, sich an Veränderungen anzupassen. Damit eine solche Politik erfolgreich ist, muss es einen Konsens darüber zwischen allen beteiligten Akteuren geben und darüber hinaus auch eine Kohärenz zwischen den verschiedenen politischen Institutionen. Das ist deswegen wichtig, weil der Innovationsprozess komplex ist und verschiedene Politikbereiche berührt. Ziel sollte die Schaffung eines Systems sein, das einerseits auf Autonomie und Kooperation aufbaut, andererseits aber auch Wettbewerb zwischen den beteiligten Institutionen und Organisationen fördert. Eine wichtige Bedingung für ein positives Investitionsklima im Bereich der Innovation ist die Erreichung von makroökonomischer Stabilität. Die gegenwärtige Situation ist gekennzeichnet durch Instabilität des Rechtswesens, durch Korruption und Probleme des Vertragsschutzes, die sowohl ausländische als auch inländische Akteure davon abhält, sich in wirtschaftlichen Aktivitäten in Mazedonien zu engagieren. Bei der Suche nach einem Ausweg aus diesen Problemen ist es wichtig für Mazedonien, von anderen Ländern wie Slowenien zu lernen, die ähnliche Probleme haben, aber auch schon Erfahrungen in der Problemlösung. Man muss dabei beachten, dass der Entwicklungsstand, das wirtschaftliche und das politische Umfeld in beiden Vergleichsländern sich erheblich unterscheiden, so dass die Lektionen, die Mazedonien von Slowenien lernen könnte, nicht direkt übertragen und kopiert werden können, sondern entsprechend angepasst werden müssen. Die vorliegende Arbeit liefert Einsichten in die Probleme der Innovationspolitik in Transformationsländern und liefert daher sowohl einen Anreiz als auch eine Quelle von Informationen für künftige Analysen der wirtschaftlichen Bedingungen und vor allem Innovationspolitik in Transformationsländern.

Testing Delivery Systems in Transnational virtual learning: the vocational management training for the european tourism industry (VocMat) case study

This article discusses the lessons learned from developing and delivering the Vocational Management Training for the European Tourism Industry (VocMat) online training programme, which was aimed at providing flexible, online distance learning for the European tourism industry. The programme was designed to address managers ‘need for flexible, senior management level training which they could access at a time and place which fitted in with their working and non-work commitments. The authors present two main approaches to using the Virtual Learning Environment, the feedback from the participants, and the implications of online Technology in extending tourism training opportunities

Private industrial project management: a systems-based case study

The technique of linear responsibility analysis is used for a retrospective case study of a private industrial development consisting of an extension to existing buildings to provide a warehouse, services block and packing line. The organizational structure adopted on the project is analysed using concepts from systems theory which are included in Walker's theoretical model of the structure of building project organizations (Walker, 1981). This model proposes that the process of building provision can be viewed as systems and subsystems which are differentiated from each other at decision points. Further to this, the subsystems can be viewed as the interaction of managing system and operating system. Using Walker's model, a systematic analysis of the relationships between the contributors gives a quantitative assessment of the efficacy of the organizational structure used. The causes of the client's dissatisfaction with the outcome of the project were lack of integration and complexity of the managing system. However, there was a high level of satisfaction with the completed project and this is reflected by the way in which the organization structure corresponded to the model's propositions.

An analysis of the management of a public sector project: a systems-based case study

The management of a public sector project is analysed using a model developed from systems theory. Linear responsibility analysis is used to identify the primary and key decision structure of the project and to generate quantitative data regarding differentiation and integration of the operating system, the managing system and the client/project team. The environmental context of the project is identified. Conclusions are drawn regarding the project organization structure's ability to cope with the prevailing environmental conditions. It is found that the complexity of the managing system imposed on the project was unable to achieve this and created serious deficiencies in the outcome of the project.

Using learning networks to understand complex systems: a case study of biological, geophysical and social research in the Amazon

Developing high-quality scientific research will be most effective if research communities with diverse skills and interests are able to share information and knowledge, are aware of the major challenges across disciplines, and can exploit economies of scale to provide robust answers and better inform policy. We evaluate opportunities and challenges facing the development of a more interactive research environment by developing an interdisciplinary synthesis of research on a single geographic region. We focus on the Amazon as it is of enormous regional and global environmental importance and faces a highly uncertain future. To take stock of existing knowledge and provide a framework for analysis we present a set of mini-reviews from fourteen different areas of research, encompassing taxonomy, biodiversity, biogeography, vegetation dynamics, landscape ecology, earth-atmosphere interactions, ecosystem processes, fire, deforestation dynamics, hydrology, hunting, conservation planning, livelihoods, and payments for ecosystem services. Each review highlights the current state of knowledge and identifies research priorities, including major challenges and opportunities. We show that while substantial progress is being made across many areas of scientific research, our understanding of specific issues is often dependent on knowledge from other disciplines. Accelerating the acquisition of reliable and contextualized knowledge about the fate of complex pristine and modified ecosystems is partly dependent on our ability to exploit economies of scale in shared resources and technical expertise, recognise and make explicit interconnections and feedbacks among sub-disciplines, increase the temporal and spatial scale of existing studies, and improve the dissemination of scientific findings to policy makers and society at large. Enhancing interaction among research efforts is vital if we are to make the most of limited funds and overcome the challenges posed by addressing large-scale interdisciplinary questions. Bringing together a diverse scientific community with a single geographic focus can help increase awareness of research questions both within and among disciplines, and reveal the opportunities that may exist for advancing acquisition of reliable knowledge. This approach could be useful for a variety of globally important scientific questions.

Toward the Optimization of an e-Tongue System Using Information Visualization: A Case Study with Perylene Tetracarboxylic Derivative Films in the Sensing Units

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Technology assessment for power quality mitigation devices - Micro-DVR case study

This work presents a case study on technology assessment for power quality improvement devices. A system compatibility test protocol for power quality mitigation devices was developed in order to evaluate the functionality of three-phase voltage restoration devices. In order to validate this test protocol, the micro-DVR, a reduced power development platform for DVR (dynamic voltage restorer) devices, was tested and the results are discussed based on voltage disturbances standards. (C) 2011 Elsevier B.V. All rights reserved.

Information technology for development of small and medium-sized exporters in Latin America and East Asia

Includes bibliography

Information on disaster risk management: case study of five countries: Jamaica

Incluye Bibliografía

Identifying problems for choosing suitable areas for installation of a new landfill through GIS technology: A case study

Selecting a suitable place to install a new landfill is a hard work. Bauru is a Brazilian municipality where the local landfill currently in use has a life span that is almost over, and the selection of a new area for a future landfill is crucial and urgent. Here we use a geographic information system (GIS) approach to indicate possible suitable areas for installing the landfill. The considered criteria were: river network and the respective buffer zone, relief, urban areas and their respective buffer zone, existence of Areas for Environmental Protection (AEPs), occurrence of wells and their respective buffer zones, existence of airports and their buffer zones, wind direction, and the road network and its respective buffer zone. Due the facts that (1) Bauru has an urban area relatively large in relation to whole municipal area, (2) Bauru has two airports, and (3) this area encompasses parts of three AEPs, the model showed that there are few areas suitable and moderately suitable in Bauru, and the greater part of the municipality is unsuitable to install a new landfill. Due to this important finding reported here, the local policymakers should consider the suitable or even moderately suitable areas for analysis in situ or look for other creative solutions for destination of the solid waste. We highly encourage the use of GIS in studies that seek suitable areas for future landfills, having found that SIG was a tool that allowed fast and precise work and generated an outcome sufficiently clear of interpretation.Implications: Solid waste (SW) management is one of the main environmental concerns nowadays. Landfilling SW is still the main practice to disposal of such material. However, for many regions, suitable places for landfilling are getting scarce. This study proved this situation for a populous place in a southeastern Brazilian region. This study also showed how the decision makers should manage the problem in order to minimize the amount of SW generated and delivered for the landfill. Massive investment in education is a critical issue to reach the proposed aim.

Toward the Optimization of an e-Tongue System Using Information Visualization: A Case Study with Perylene Tetracarboxylic Derivative Films in the Sensing Units

The wide variety of molecular architectures used in sensors and biosensors and the large amount of data generated with some principles of detection have motivated the use of computational methods, such as information visualization techniques, not only to handle the data but also to optimize sensing performance. In this study, we combine projection techniques with micro-Raman scattering and atomic force microscopy (AFM) to address critical issues related to practical applications of electronic tongues (e-tongues) based on impedance spectroscopy. Experimentally, we used sensing units made with thin films of a perylene derivative (AzoPTCD acronym), coating Pt interdigitated electrodes, to detect CuCl(2) (Cu(2+)), methylene blue (MB), and saccharose in aqueous solutions, which were selected due to their distinct molecular sizes and ionic character in solution. The AzoPTCD films were deposited from monolayers to 120 nm via Langmuir-Blodgett (LB) and physical vapor deposition (PVD) techniques. Because the main aspects investigated were how the interdigitated electrodes are coated by thin films (architecture on e-tongue) and the film thickness, we decided to employ the same material for all sensing units. The capacitance data were projected into a 2D plot using the force scheme method, from which we could infer that at low analyte concentrations the electrical response of the units was determined by the film thickness. Concentrations at 10 mu M or higher could be distinguished with thinner films tens of nanometers at most-which could withstand the impedance measurements, and without causing significant changes in the Raman signal for the AzoPTCD film-forming molecules. The sensitivity to the analytes appears to be related to adsorption on the film surface, as inferred from Raman spectroscopy data using MB as analyte and from the multidimensional projections. The analysis of the results presented may serve as a new route to select materials and molecular architectures for novel sensors and biosensors, in addition to suggesting ways to unravel the mechanisms behind the high sensitivity obtained in various sensors.

Sedimentary environments and climate change: a case study (late Miocene, central Crete)

In this study, conditions of deposition and stratigraphical architecture of Neogene (Tortonian, 11-6,7Ma) sediments of southern central Crete were analysed. In order to improve resolution of paleoclimatic data, new methods were applied to quantify environmental parameters and to increase the chronostratigraphic resolution in shallow water sediments. A relationship between paleoenvironmental change observed on Crete and global processes was established and a depositional model was developed. Based on a detailed analysis of the distribution of non geniculate coralline red algae, index values for water temperature and water depth were established and tested with the distribution patterns of benthic foraminifera and symbiont-bearing corals. Calcite shelled bivalves were sampled from the Algarve coast (southern Portugal) and central Crete and then 87Sr/86Sr was measured. A high resolution chronostratigraphy was developed based on the correlation between fluctuations in Sr ratios in the measured sections and in a late Miocene global seawater Sr isotope reference curve. Applying this method, a time frame was established to compare paleoenvironmental data from southern central Crete with global information on climate change reflected in oxygen isotope data. The comparison between paleotemperature data based on red algae and global oxygen isotope data showed that the employed index values reflect global change in temperature. Data indicate a warm interval during earliest Tortonian, a second short warm interval between 10 and 9,5Ma, a longer climatic optimum between 9 and 8Ma and an interval of increasing temperatures in the latest Tortonian. The distribution of coral reefs and carpets shows that during the warm intervals, the depositional environment became tropical while temperate climates prevailed during the cold interval. Since relative tectonic movements after initial half-graben formation in the early Tortonian were low in southern central Crete, sedimentary successions strongly respond to global sea-level fluctuation. A characteristic sedimentary succession formed during a 3rd order sea-level cycle: It comprises mixed siliciclastic-limestone deposited during sea-level fall and lowstand, homogenous red algal deposits formed during sea-level rise and coral carpets formed during late rise and highstand. Individual beds in the succession reflect glacioeustatic fluctuations that are most prominent in the mixed siliciclastic-limestone interval. These results confirm the fact that sedimentary successions deposited at the critical threshold between temperate and tropical environments develop characteristic changes in depositional systems and biotic associations that can be used to assemble paleoclimatic datasets.

Rural water system sustainability : a case study of community-managed water systems in Saramaka communities

Worldwide, rural populations are far less likely to have access to clean drinking water than are urban ones. In many developing countries, the current approach to rural water supply uses a model of demand-driven, community-managed water systems. In Suriname, South America rural populations have limited access to improved water supplies; community-managed water supply systems have been installed in several rural communities by nongovernmental organizations as part of the solution. To date, there has been no review of the performance of these water supply systems. This report presents the results of an investigation of three rural water supply systems constructed in Saramaka villages in the interior of Suriname. The investigation used a combination of qualitative and quantitative methods, coupled with ethnographic information, to construct a comprehensive overview of these water systems. This overview includes the water use of the communities, the current status of the water supply systems, histories and sustainability of the water supply projects, technical reviews, and community perceptions. From this overview, factors important to the sustainability of these water systems were identified. Community water supply systems are engineered solutions that operate through social cooperation. The results from this investigation show that technical adequacy is the first and most critical factor for long-term sustainability of a water system. It also shows that technical adequacy is dependent on the appropriateness of the engineering design for the social, cultural, and natural setting in which it takes place. The complex relationships between technical adequacy, community support, and the involvement of women play important roles in the success of water supply projects. Addressing these factors during the project process and taking advantage of alternative water resources may increase the supply of improved drinking water to rural communities.