Lining of waste impoundment and disposal facilities /

"SW-870"--Cover.

Radioactive waste processing and disposal : a bibliography of selected report literature /

Includes index.

Prevent illegal dumping /

"December 2010."

Statewide screening activities for Illinois' low-level radioactive waste (LLRW) disposal facility : final report to the Illinois Low-Level Radioactive Waste Task Group and the director, Illinois Department of Nuclear Safety /

"This report was prepared under a contract with the Illinois Dept. of Nuclear Safety (IDNS) in support of the Illinois Low-Level Radioactive Waste Task Group. Numerous staff members of the Illinois State Geological Survey (ISGS) and the Illinois State Water Survey (ISWS) contributed to this report, which was compiled under the general administrative direction of Bill Shilts and Derek Winstanley, Chiefs of the ISGS and ISWS, respectively."--P. iv.

Optimization process of polyester polymer mortars modified with recycled GFRP waste aggregates – application of factorial experiment design-

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remolded, and complex composition of the composite itself, which includes glass fibres, matrix and different types of inorganic fillers. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. There are several methods to recycle GFR thermostable materials: (a) incineration, with partial energy recovery due to the heat generated during organic part combustion; (b) thermal and/or chemical recycling, such as solvolysis, pyrolisis and similar thermal decomposition processes, with glass fibre recovering; and (c) mechanical recycling or size reduction, in which the material is subjected to a milling process in order to obtain a specific grain size that makes the material suitable as reinforcement in new formulations. This last method has important advantages over the previous ones: there is no atmospheric pollution by gas emission, a much simpler equipment is required as compared with ovens necessary for thermal recycling processes, and does not require the use of chemical solvents with subsequent environmental impacts. In this study the effect of incorporation of recycled GFRP waste materials, obtained by means of milling processes, on mechanical behavior of polyester polymer mortars was assessed. For this purpose, different contents of recycled GFRP waste materials, with distinct size gradings, were incorporated into polyester polymer mortars as sand aggregates and filler replacements. The effect of GFRP waste treatment with silane coupling agent was also assessed. Design of experiments and data treatment were accomplish by means of factorial design and analysis of variance ANOVA. The use of factorial experiment design, instead of the one factor at-a-time method is efficient at allowing the evaluation of the effects and possible interactions of the different material factors involved. Experimental results were promising toward the recyclability of GFRP waste materials as polymer mortar aggregates, without significant loss of mechanical properties with regard to non-modified polymer mortars.

Experiments on new polymer based mortars filled with FRP waste recyclates - a quantitative analysis

Glass fibre-reinforced plastics (GFRP) have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remolded, and complex composition of the composite itself. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, efforts were made in order to recycle grinded GFRP waste, proceeding from pultrusion production scrap, into new and sustainable composite materials. For this purpose, GFRP waste recyclates, were incorporated into polyester based mortars as fine aggregate and filler replacements at different load contents and particle size distributions. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified polymer mortars. Results revealed that GFRP waste filled polymer mortars present improved flexural and compressive behaviour over unmodified polyester based mortars, thus indicating the feasibility of the waste reuse in polymer mortars and concrete. © 2011, Advanced Engineering Solutions.

Waste collection routing-limited multiple landfills and heterogeneous fleet

This article deals with a real-life waste collection routing problem. To efficiently plan waste collection, large municipalities may be partitioned into convenient sectors and only then can routing problems be solved in each sector. Three diverse situations are described, resulting in three different new models. In the first situation, there is a single point of waste disposal from where the vehicles depart and to where they return. The vehicle fleet comprises three types of collection vehicles. In the second, the garage does not match any of the points of disposal. The vehicle is unique and the points of disposal (landfills or transfer stations) may have limitations in terms of the number of visits per day. In the third situation, disposal points are multiple (they do not coincide with the garage), they are limited in the number of visits, and the fleet is composed of two types of vehicles. Computational results based not only on instances adapted from the literature but also on real cases are presented and analyzed. In particular, the results also show the effectiveness of combining sectorization and routing to solve waste collection problems.

Strategy Report for Electronics Waste Management in Iowa, December 30, 2003

Strategy Report for Electronics Waste Management

Waste Matters, July 2003

Newsletter for Department of Natural Resources, Waste Management Division

Waste Matters, May 2004

Newsletter produced by Department Natural Resources, Waste Managment Division

Waste Matters, September 2004

Newsletter prdouced by Department of Natural Resources, Waste Matters Division

Waste Matters, January 2004

Newsletter produced by Department of Natural Resources, Waste Management Division

Iowa Statewide Waste Characterization Study, February 2006

This report was prepared with the support of the Iowa Department of Natural Resources (IDNR) Contract Number 06-G550-02. It has been prepared for use by the IDNR for the specific purposes identified in the report. Use of the report and its contents for other purposes is prohibited without prior approval from the IDNR. Any opinions, findings, conclusions or recommendations expressed herein are those of the author and do not necessarily reflect the views of the IDNR. The Iowa Department of Natural Resources (IDNR) commissioned the completion of a statewide waste characterization study in 2005.

Waste Matters, December 1995.

Newsletter for Department of Natural Resources, Waste Management Division

Wood waste processing in Iowa, 1996

The objective of this report is to gain a better understanding of the wood waste market in Iowa through surveying the processors of wood waste. A survey was sent out by the Iowa Department of Natural Resources Management Assistance Division to 147 public waste management organizations and private businesses with a questionnaire which asked for details of any wood waste processing operation.